Boston Scientific Neuromodulation SC5232 SC-5232 User Manual 90668562 01 falconmanual en v8 indd

Boston Scientific Neuromodulation Corporation SC-5232 90668562 01 falconmanual en v8 indd

Additional User Manual 8

Adjust Screen Brightness ...........................................43Adjust Volume ..........................................................44View Information about Your Remote Control or Stimulator .................................................................45 About System Settings
Page 42Precision Spectra™ Remote Control Handbook, 90668562-03, Rev C Using the System Settings , you can set or change a few RC interface settings, such as the Alert Volume , Screen Brightness , and the Language setting . In addition, you can view information about the RC and the Stimulator . Your healthcare provider can access special functions through the Clinician Menu (password protected) to aid you in your therapy.Remote SettingsAlert VolumeScreen BrightnessLanguagesSelectBack About System Settings
SYSTEM SETTINGSPage 43Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C System SettingsRemote SettingsSystem InfoClinician MenuSelectBackRemote SettingsAlert VolumeScreen BrightnessLanguagesSelectBack1 3ProgramsStimulation AreasMain MenuSystem SettingsSelectBackPFrom the Main Menu , select System Settings .Select Remote Settings by pressing .Select Screen Brightness by pressing .2Screen BrightnessBack4/5To decrease or increase Screen Brightness, press the or the button. Adjust Screen Brightness
Precision Spectra™ Remote Control Handbook, 90668562-03, Rev C System SettingsRemote SettingsSystem InfoClinician MenuSelectBackRemote SettingsAlert VolumeScreen BrightnessLanguagesSelectBack1 3ProgramsStimulation AreasMain MenuSystem SettingsSelectBackPFrom the Main Menu , select System Settings .Select Remote Settings by pressing .Select Alert Volume by pressing .2Alert VolumeBack4/5To increase or decrease screen volume, press the or the button.The RC emits a single, short Alert that sounds like a “beep” whenever you press a button. The volume of the Alert can be adjusted or turned off. Adjust VolumePage 44
Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C e System SettingsRemote SettingsSystem InfoClinician MenuSelectBackSelectBackSystem InfoRemote InfoStimulator Info1 3aProgramsStimulation AreasMain MenuSystem SettingsSelectBackPFrom the Main Menu , select System Settings .Select System Info by pressing .Select Remote Info by pressing .2SelectBackSystem InfoRemote InfoStimulator Info3bSelect Stimulator Info by pressing .You can view basic information about your RC and Stimulator that may be helpful for your healthcare provider when troubleshooting an issue.OR View Information about Your Remote Control or StimulatorSYSTEM SETTINGSPage 45
Page 46Precision Spectra™ Remote Control Handbook, 90668562-03, Rev C This page intentionally left blank.
Save Changes Screen ................................................48Battery Low and Recharge Messages .........................49Charging Remote Screen ..........................................51Charger Disconnected Screen ...................................51Remote Battery Full Screen ........................................52Button Stuck .............................................................52End of Programmed Service ......................................53 Reminders and Messages
Page 48Precision Spectra™ Remote Control Handbook, 90668562-01, Rev CThe Save Changes confirmation screen will appear under the following conditions:• One or more changes have been made to the Program currently running, including: changes in stimulation strength (on the Home Screen), changes to any of the Stimulation Area parameters AND…• The Program that is running is about to be changed to a different Program. This can occur when selecting either Change Programs or Restore to Clinic Settings from the Programs Menu.If you want to save the change(s), select Yes – Save . These settings will be the default settings the next time this Program is selected to be run.If you do not want to save the change(s), select No – Discard. The original Program settings will be maintained and any change(s) will be discarded. The RC will then proceed to the function that you selected – either Change Programs or Restore to Clinic Settings . Save Changes Screen
REMIND/MESSAGEPage 49Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C The RC will provide on-screen messages to remind you when your Stimulator and RC batteries are low. For the Implant, the following on-screen messages display:For instructions on recharging the Implant, refer to your Charger Handbook. For the Trial Stimulator, the following on-screen messages display:For instructions on replacing your Trial Stimulator batteries, refer to your Patient Trial Handbook.LowStimulatorBatteryPress to continueChargeStimulatorNowPress to continue Battery Low and Recharge MessagesReplaceBatteryNowPress to continuePress to continueLowETSBatteryETS = Trial Stimulator
Page 50Precision Spectra™ Remote Control Handbook, 90668562-01, Rev CFor the RC, the following on-screen messages display:Refer to Recharging the Remote Control page 16 of this handbook for more information on charging your RC.ChargeRemoteNowPress to continueLowRemoteBattery
REMIND/MESSAGEPage 51Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C This screen is displayed when the RC is being used and the USB power supply is plugged in.This screen is displayed when the RC is being used and the USB power supply is disconnected.ChargingRemoteChargerDisconnected Charging Remote Screen Charger Disconnected Screen
Page 52Precision Spectra™ Remote Control Handbook, 90668562-01, Rev CThis screen is displayed when the RC is being used and the RC battery becomes fully charged.If a button is stuck on the RC, other button presses may not function as intended. The RC will provide the following on-screen message if it detects a stuck button:Please attempt to resolve the stuck button in order to restore proper functionality of the RC.RemoteBatteryFull Remote Battery Full Screen Button Stuck
REMIND/MESSAGEPage 53Precision Spectra™ Remote Control Handbook, 90668562-01, Rev C Your Stimulator software has been programmed to end service after a defined period. When your Stimulator is within approximately 180 days of the end of its programmed period, the RC will display the following on-screen message:Press to clear the message. The message will reappear approximately weekly until the end of the Stimulator’s programmed period is reached. When the end of its programmed period is reached, the RC will display the following on-screen message:~180Remaining daysof servicePress to continueStimulatorServiceExceeded End of Programmed Service
Page 54Precision Spectra™ Remote Control Handbook, 90668562-01, Rev CThis page intentionally left blank.

Navigation menu