Broadcom BRCM1022-H 802.11ag/Draft 802.11n Wireless LAN PCI-E MiniCard User Manual 2
Broadcom Corporation 802.11ag/Draft 802.11n Wireless LAN PCI-E MiniCard 2
Broadcom >
Contents
User Manual 2
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: January 2007
Document Part Number: 431181-001
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Table of contents
1 Using the Pointing Devices
Using the TouchPad ............................................................................................................................. 1
Using the pointing stick ........................................................................................................................ 2
Setting pointing device preferences ..................................................................................................... 2
Connecting an external mouse ............................................................................................................. 2
Using the pen ....................................................................................................................................... 3
Identifying the pen components ........................................................................................... 3
Holding the pen .................................................................................................................... 3
Performing mouse clicks with the pen ................................................................................. 3
Performing other procedures with the pen ........................................................................... 3
Pressure-sensitivity .............................................................................................................. 4
Calibrating the pen ............................................................................................................... 4
Using the pen holder ............................................................................................................ 5
Setting pen preferences ....................................................................................................... 5
Using the touchscreen (select models only) ......................................................................................... 6
2 Using the keyboard
Using hotkeys ....................................................................................................................................... 7
Displaying system information (fn+esc) ............................................................................... 8
Opening the Help and Support Center (fn+f1) ..................................................................... 8
Opening the Print Options window (fn+f2) ........................................................................... 8
Opening a Web browser (fn+f3) .......................................................................................... 9
Switching the screen image (fn+f4) ..................................................................................... 9
Initiating standby (fn+f5) .................................................................................................... 10
Initiating QuickLock (fn+f6) ................................................................................................ 10
Decreasing screen brightness (fn+f7) ................................................................................ 10
Increasing screen brightness (fn+f8) ................................................................................. 10
Playing, pausing or resuming an audio CD or a DVD (fn+f9) ............................................ 11
Stopping an audio CD or a DVD (fn+f10) .......................................................................... 11
Playing previous track or section of an audio CD or a DVD (fn+f11) ................................. 11
Playing next track or section of an audio CD or a DVD (fn+f12) ....................................... 11
Using the HP Quick Launch Buttons control panel ............................................................................ 12
Opening the HP Quick Launch Buttons control panel ....................................................... 12
Setting button preferences ................................................................................................. 12
Setting Zoom preferences ................................................................................................. 13
Setting other preferences .................................................................................................. 13
3 Using the keypads
Using the embedded numeric keypad ................................................................................................ 15
ENWW iii
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Enabling and disabling the embedded numeric keypad .................................................... 15
Switching key functions on the embedded numeric keypad .............................................. 15
Using an external numeric keypad ..................................................................................................... 15
4 Cleaning the TouchPad, keyboard, and touchscreen (select models only)
Index ................................................................................................................................................................... 17
iv ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
1 Using the Pointing Devices
Using the TouchPad
The following illustration and table describe the computer TouchPad.
Component Description
(1) TouchPad light Blue: TouchPad is enabled.
Amber: TouchPad is disabled.
(2) TouchPad* Moves the pointer and selects or activates items on the screen.
(3) Left TouchPad button* Functions like the left button on an external mouse.
(4) Right TouchPad button* Functions like the right button on an external mouse.
(5) TouchPad scroll zone* Scrolls up or down.
(6) TouchPad on/off button Enables/disables the TouchPad.
*This table describes factory settings. To view and change pointing device preferences, select Start > Control Panel >
Hardware and Sound > Mouse. In the Windows Security dialog box, click Allow.
To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer
to go. Use the TouchPad buttons like the corresponding buttons on an external mouse. To scroll up and
down using the TouchPad vertical scroll zone, slide your finger up or down over the lines.
ENWW Using the TouchPad 1
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
NOTE If you are using the TouchPad to move the pointer, you must lift your finger off the
TouchPad before moving it to the scroll zone. Simply sliding your finger from the TouchPad to
the scroll zone will not activate the scrolling function.
Using the pointing stick
Press the pointing stick in the direction you want to move the pointer on the screen. Use the left and
right pointing stick buttons as you would the left and right buttons on an external mouse.
Setting pointing device preferences
Mouse Properties in Microsoft® Windows® allows you to customize pointing device settings such as
mouse speed preferences.
To access Mouse Properties, select Start > Control Panel > Printers and Other Hardware >
Mouse.
Connecting an external mouse
You can connect an external USB mouse to the computer using one of the USB ports on the computer.
A USB mouse can also be connected to the system using the ports on an optional docking device or
expansion product.
2 Chapter 1 Using the Pointing Devices ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the pen
You can write with the pen in pen-specific programs, such as the Tablet PC Input Panel [DOES SPUTNIK
SUPPORT THIS?], in all Microsoft Office applications, and in most other Windows programs and utilities.
The information you write on the screen with the pen can be filed, searched, and shared among most
Windows programs.
Identifying the pen components
The pen interacts with the computer whenever the tip (1) of the pen is approximately 1.27 cm (0.5 inch)
from the screen. [IS THIS TRUE FOR SPUTNIK OR DOES THE PEN HAVE TO TOUCH THE
SCREEN?]
The pen tether eyelet (2) allows you to connect a tether from the pen to the computer.
Holding the pen
Hold the pen as if you were writing with a standard pen or pencil. Position the pen in your hand so that
you will not accidentally press the pen button.
As you monitor the movements of the pen, focus on the pointer, not on the tip of the pen.
Performing mouse clicks with the pen
To select an item on the screen as you would with the left button of an external mouse:
Tap the item with the tip of the pen.
To double-click an item on the screen as you would with the left button of an external mouse:
Tap the item twice with the tip of the pen.
[HOW DOES ONE RIGHT-CLICK? DRAG & DROP?]
Performing other procedures with the pen
●To display the pointer location, hold the pen tip immediately over any location on the screen without
touching the screen with the pen tip.
●To display the menu options related to an item on the screen, tap the screen with the pen tip.
●To write with the pen, write on the screen with the tip of the pen.
●To press a pen-activated button, tap the button with the tip of the pen.
ENWW Using the pen 3
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Pressure-sensitivity
[DOES THIS SECTION APPLY?] The pen is equipped with a pressure-sensitive feature. This means
that you can manipulate the pen to create lines of various thickness, depending upon the amount of
pressure you use to write.
NOTE This feature is only available if the Tablet PC Input Panel software program is enabled.
Calibrating the pen
The pen can function at the default calibration or at a calibration set by another user. However, HP highly
recommends that you use the pen only while it is calibrated to your personal handwriting and mouse
action motions. Calibration optimizes pen performance for all users and particularly for left-handed
users.
To calibrate the pen: [THESE STEPS MAY CHANGE WITH VISTA]
1. Select Start > Control Panel > Printers and Other Hardware > Tablet and Pen Settings >
Settings tab.
2. Select Calibrate.
3. Follow the instructions on the screen.
●Tap the pen in the exact center of each of the calibration markers. The calibration markers
are displayed on the screen as plus signs (+).
●Be sure to calibrate the pen for use in both portrait and landscape orientations.
NOTE You can display information about any setting in the Tablet and Pen Settings window by
selecting the question mark button in the upper-right corner of the window, and then select a
setting.
4 Chapter 1 Using the Pointing Devices ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the pen holder
To protect the pen when you are not using it, insert the pen, tip first, into the pen holder on the computer.
[I JUST REALIZED THIS GRAPHIC SHOWS THE COMPUTER UPSIDE DOWN. I'LL HAVE IT
CORRECTED FORTHE NEXT REVIEW.]
Setting pen preferences
[THESE STEPS MAY CHANGE WITH VISTA]
Pen preferences are set in the Tablet and Pen Settings window of the operating system. The preferences
include settings that optimize handwriting recognition and the location of on-screen menus for either
right-handed or left-handed users.
To access the pen settings:
Select Start > Control Panel > Printers and Other Hardware > Tablet and Pen Settings > Pen
Options tab.
The preferences you set in the Tablet and Pen Settings window are specific to the pen and the computer.
Pointing device preferences, such as pointer speed, click speed, and mouse trails, are set in the Mouse
Properties window. These preferences apply to any pointing device in the system.
To access Mouse Properties:
Select Start > Control Panel > Printers and Other Hardware > Mouse.
ENWW Using the pen 5
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the touchscreen (select models only)
The touchscreen (select models only) allow you to make selections or activate items on the screen using
your fingers.
CAUTION To prevent damage to the touchscreen:
Do not use your fingernails or other sharp objects to make selections.
Do not slide your finger or any other object across the screen.
To select an item on the screen as you would with the left button of an external mouse:
Lightly tap the item with your finger.
To double-click an item on the screen as you would with the left button of an external mouse:
Lightly tap the item twice with your finger.
6 Chapter 1 Using the Pointing Devices ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
I am assuming that finger touching is the
same as pen touching. Please let me
know where the differences are.
2 Using the keyboard
Using hotkeys
Hotkeys are combinations of the fn key (1) and either the esc key (2) or one of the function keys (3).
The icons on the f1 through f12 keys represent the hotkey functions. Hotkey functions and procedures
are discussed in the following sections.
Function Hotkey
Display system information. fn+esc
Clear system information. fn+esc or press enter
Open the Help and Support Center. fn+f1
Open the Print Options window. fn+f2
Open a Web browser. fn+f3
Alternate between computer display and external display. fn+f4
Initiate standby. fn+f5
Initiate QuickLock. fn+f6
Decrease screen brightness. fn+f7
Increase screen brightness. fn+f8
Play, pause, or resume an audio CD or a DVD. fn+f9
ENWW Using hotkeys 7
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Function Hotkey
Stop an audio CD or a DVD. fn+f10
Play the previous track or section on an audio CD or a DVD. fn+f11
Play the next track on an audio CD or a DVD. fn+f12
To use a hotkey command on the computer keyboard, follow either of these steps:
●Briefly press the fn key, and then briefly press the second key of the hotkey command.
– or –
●Press and hold down the fn key, briefly press the second key of the hotkey command, and then
release both keys at the same time.
Displaying system information (fn+esc)
Press fn+esc to display information about system hardware components and the system BIOS version
number.
In the Windows fn+esc display, the version of the system BIOS (basic input-output system) is displayed
as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS
date is sometimes called the system ROM version number.
Opening the Help and Support Center (fn+f1)
Press fn+f1 to open the Help and Support Center.
In addition to providing information about your Windows operating system, the Help and Support Center
provides
●Information about your computer, such as model and serial number, installed software, hardware
components, and specifications.
●Answers to questions about using your computer.
●Tutorials to help you learn to use the computer and Windows features.
●Updates for the Windows operating system, drivers, and the software provided on your computer.
●Checkups for computer functionality.
●Automated and interactive troubleshooting, repair solutions, and system recovery procedures.
●Links to HP support specialists.
Opening the Print Options window (fn+f2)
Press fn+f2 to open the Print Options window of the active Windows application.
8 Chapter 2 Using the keyboard ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Opening a Web browser (fn+f3)
Press fn+f3 to open your Web browser.
Until you have set up your Internet or network services, the fn+f3 hotkey opens the Windows Internet
Connection Wizard.
After you have set up your Internet or network services and your Web browser home page, you can
press fn+f3 to quickly access your home page and the Internet.
Switching the screen image (fn+f4)
Press fn+f4 to switch the screen image among display devices connected to the system. For example,
if a monitor is connected to the computer, pressing fn+f4 alternates the screen image from computer
display to monitor display to simultaneous display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external VGA video
standard. The fn+f4 hotkey can also alternate images among other devices receiving video information
from the computer.
The following video transmission types, with examples of devices that use them, are supported by
the fn+f4 hotkey:
●LCD (computer display)
●External VGA (most external monitors)
●S-Video (televisions, camcorders, VCRs, and video capture cards with S-Video-in jacks)
●Composite video (televisions, camcorders, VCRs, and video capture cards with composite-video-
in jacks)
NOTE Composite video devices can be connected to the system only by using an optional
expansion product.
ENWW Using hotkeys 9
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Initiating standby (fn+f5)
Press fn+f5 to initiate standby.
When standby is initiated, your information is stored in random access memory (RAM), the screen is
cleared, and power is conserved. While the computer is in standby, the power light blinks.
CAUTION To reduce the risk of information loss, save your work before initiating standby.
The computer must be turned on before you can initiate standby. If the computer is in hibernation, you
must restore from hibernation before you can initiate standby.
NOTE To restore from hibernation, briefly press the power button.
To resume from standby, briefly press the power button, press any key on the keyboard, or press a
Quick Launch button.
The function of the fn+f5 hotkey can be changed. For example, you can set the fn+f5 hotkey to initiate
hibernation instead of standby.
NOTE In all Windows operating system windows, references to the sleep button apply to the
fn+f5 hotkey.
Initiating QuickLock (fn+f6)
Press fn+f6 to initiate the QuickLock security feature.
QuickLock protects your information by displaying the operating system Log On window. While the Log
On window is displayed, the computer cannot be accessed until a Windows user password or a Windows
administrator password is entered.
NOTE Before you can use QuickLock, you must set a Windows user password or a Windows
administrator password. For instructions, refer to the Help and Support Center.
To use QuickLock, press fn+f6 to display the Log On window and lock the computer. Then follow the
instructions on the screen to enter your Windows user password or your Windows administrator
password and access the computer.
Decreasing screen brightness (fn+f7)
Press fn+f7 to decrease screen brightness. Hold down the hotkey to decrease the brightness level
incrementally.
Increasing screen brightness (fn+f8)
Press fn+f8 to increase screen brightness. Hold down the hotkey to increase the brightness level
incrementally.
10 Chapter 2 Using the keyboard ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Playing, pausing or resuming an audio CD or a DVD (fn+f9)
The fn+f9 hotkey functions only when an audio CD or a DVD is inserted:
●If the audio CD or the DVD is not playing, press fn+f9 to begin or resume the play.
●If the audio CD or the DVD is playing, press fn+f9 to pause the play.
Stopping an audio CD or a DVD (fn+f10)
Press fn+f10 to stop the play of an audio CD or a DVD.
Playing previous track or section of an audio CD or a DVD (fn+f11)
While an audio CD or a DVD is playing, press fn+f11 to play the previous track of the CD or the previous
section of the DVD.
Playing next track or section of an audio CD or a DVD (fn+f12)
While an audio CD or a DVD is playing, press fn+f12 to play the next track of the CD or the next section
of the DVD.
ENWW Using hotkeys 11
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the HP Quick Launch Buttons control panel
The HP Quick Launch Buttons control panel manages the following settings:
●Programming of the Media button and the DVD button
●Preferences for the operating system and program font and icon settings
●Preferences for the display of the HP Quick Launch Buttons icon on the taskbar
●Button assignments for non-administrator users
●Button assignments for the Easy Access buttons on an optional external keyboard
NOTE Quick Launch buttons are called Easy Access buttons on an optional external
keyboard.
The following sections provide instructions for setting preferences within the control panel. For additional
on-screen information about any item on the control panel, click the Help button in the upper-right corner
of the window. The Help button is identified with a question mark icon.
Opening the HP Quick Launch Buttons control panel
You can open the HP Quick Launch Buttons control panel in any of the following ways:
●Select Start > Control Panel > Printers and Other Hardware > Quick Launch Buttons.
●Double-click the HP Quick Launch Buttons icon in the notification area, at the far right of the
taskbar.
●Right-click the HP Quick Launch Buttons icon in the notification area, and select Adjust HP
Quick Launch Buttons Properties.
Setting button preferences
You can program the Media button to open the Media Menu, or you can program the Media button to
open media programs from a defined list when the button is pressed. You can also program the DVD
button to open media programs from a defined list when the button is pressed.
To program the Media button to open the Media Menu when the button is pressed, follow these steps:
1. In the HP Quick Launch Buttons control panel, click the Media tab.
2. Click the button next to Open the Media Menu and let you select an application from the list.
3. To save your preferences and close the control panel, click OK.
To program the Media button or the DVD button to open a media program from a defined list, follow
these steps:
1. In the HP Quick Launch Buttons control panel, click the Media tab.
2. Click the down arrow next to the button you want to set, and click a program from the list.
12 Chapter 2 Using the keyboard ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
3. To add a program, click the Add button.
a. In the Add media applications dialog box, enter the program file name or click Browse to
search for available programs.
b. Click OK.
4. To save your preferences and close the control panel, click OK.
Setting Zoom preferences
To change operating system and application font and icon settings:
1. In the HP Quick Launch Buttons control panel, click the Zoom tab.
2. Use the sliders to adjust the font and icon size in the operating system, and to adjust title and menu
font size in programs.
3. To synchronize operating system and program settings, click the Synchronize OS and
application settings box.
4. To save your preferences and close the control panel, click OK.
NOTE To restore the factory settings, click the Default button.
Setting other preferences
You can set icon and external keyboard assignments in the Quick Launch Button control panel.
NOTE Some of the preferences listed on the Preferences tab may not be supported by your
computer.
To set a preference:
1. In the HP Quick Launch Buttons control panel, click the Preferences tab.
2. To display or enable a preference, select the check box next to the item.
– or –
To clear or disable a preference, clear the check box next to the item.
3. To save your preferences and close the control panel, click OK.
NOTE For on-screen information about any item on the Preferences tab, click the Help button
in the upper-right corner of the window, and then click the item. The Help button is identified with
a question mark icon.
ENWW Using the HP Quick Launch Buttons control panel 13
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
3 Using the keypads
The computer has an embedded numeric keypad and also supports an optional external numeric keypad
or an optional external keyboard that includes a numeric keypad.
Component Description
(1) fn key Executes frequently used system functions when pressed in
combination with a function key or the esc key.
(2) num lock light On: Num lock is on.
(3) num lk key Press with the fn key to enable the embedded numeric keypad.
(4) Embedded numeric keypad Can be used like the keys on an external numeric keypad.
14 Chapter 3 Using the keypads ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the embedded numeric keypad
The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad. When
the embedded numeric keypad is turned on, each key on the keypad performs the function indicated by
the icon in the upper-right corner of the key.
Enabling and disabling the embedded numeric keypad
Press fn+num lk to enable the embedded numeric keypad. The num lock light is turned on. Press fn
+num lk again to return the keys to their standard keyboard functions.
NOTE The embedded numeric keypad will not function while an external keyboard or numeric
keypad is connected to the computer or to an optional A USB mouse can also be connected to
the system using the ports on an optional docking device or expansion product.
Switching key functions on the embedded numeric keypad
You can temporarily alternate the functions of keys on the embedded numeric keypad between their
standard keyboard functions and their keypad functions by using the fn key or the fn+shift key
combination.
●To change the function of a keypad key to keypad functions while the keypad is off, press and hold
the fn key while pressing the keypad key.
●To use the keypad keys temporarily as standard keys while the keypad is on:
●Press and hold the fn key to type in lowercase.
●Press and hold fn+shift to type in uppercase.
Using an external numeric keypad
Most keys on most external numeric keypads function differently according to whether num lock is on
or off. (Num lock is turned off at the factory.) For example:
●When num lock is on, most keypad keys type numbers.
●When num lock is off, most keypad keys function like the arrow, page up, or page down keys.
When num lock on an external keypad is turned on, the num lock light on the computer is turned on.
When num lock on an external keypad is turned off, the num lock light on the computer is turned off.
If an external keypad is connected, the embedded numeric keypad cannot be turned on.
To turn num lock on or off on an external keypad as you work:
Press the num lk key on the external keypad, not on the computer.
ENWW Using the embedded numeric keypad 15
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
4 Cleaning the TouchPad, keyboard, and
touchscreen (select models only)
Clean the touchscreen (select models only) regularly with non-abrasive wipes intended for this purpose.
Dirt and grease on the TouchPad can cause the pointer to jump around on the screen. To avoid this,
clean the TouchPad with a damp cloth, and wash your hands frequently when using the computer.
WARNING! To reduce the risk of electric shock or damage to internal components, do not use
a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner could deposit household
debris on the keyboard surface.
Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that
can become trapped beneath the keys. A can of compressed air with a straw extension can be used to
blow air around and under the keys to loosen and remove debris.
16 Chapter 4 Cleaning the TouchPad, keyboard, and touchscreen (select models only) ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Index
B
buttons
TouchPad 1
TouchPad on/off 1
C
composite video 9
D
display
image, switching 9
screen brightness hotkeys 10
E
external keyboard
assignments 13
F
fn key 7
function keys 7
H
Help and Support Center
hotkey 8
hotkeys
audio CD or DVD controls 11
decreasing screen
brightness 10
description 7
displaying system
information 8
increasing screen
brightness 10
initiating QuickLock 10
initiating standby 10
opening Help and Support
Center 8
opening Print Options
window 8
opening Web browser 9
switching screen image 9
using 8
I
icon assignments 13
K
keyboard hotkeys, identifying 7
keypad, embedded
enabling and disabling 15
identifying 14
switching key functions 15
using 15
keypad, external
num lock 15
using 15
L
lights
TouchPad 1
M
media controls, hotkeys 11
mouse, external
connecting 2
setting preferences 2
N
num lock, external keypad 15
P
pointing devices
identifying 2
setting preferences 2
using 2
pointing stick
identifying 2
using 2
Print Options window hotkey 8
Q
QuickLock hotkey 10
S
S-Video 9
screen brightness hotkeys 10
screen image, switching 9
scrolling regions, TouchPad 1
standby hotkey 10
system information hotkey 8
T
TouchPad
buttons 1
identifying 1
scrolling regions 1
using 1
TouchPad light, identifying 1
TouchPad on/off button 1
V
video transmission types 9
W
Web browser hotkey 9
Z
zoom preferences 13
ENWW Index 17
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: January 2007
Document Part Number: 431180-001
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Table of contents
1 Setting power options
Using power-saving states ................................................................................................................... 1
Initiating or exiting Sleep ...................................................................................................... 1
Initiating or exiting Hibernation ............................................................................................ 2
Using power plans ................................................................................................................................ 3
Viewing the current power plan ........................................................................................... 3
Selecting a different power plan .......................................................................................... 3
Customizing power plans ..................................................................................................... 3
Setting a password prompt on wakeup ................................................................................................ 4
2 Using battery power
Using the battery meter ........................................................................................................................ 6
Displaying the remaining battery charge ............................................................................. 6
Hiding or displaying the battery meter icon .......................................................................... 6
Inserting or removing the battery .......................................................................................................... 7
Charging a battery ................................................................................................................................ 8
Managing low-battery conditions .......................................................................................................... 9
Identifying low-battery conditions ......................................................................................... 9
Resolving a low-battery condition ...................................................................................... 10
Resolving a low-battery condition when external power is available ................ 10
Resolving a low-battery condition when a charged battery is available ............ 10
Resolving a low-battery condition when no power source is available ............. 10
Resolving a low-battery condition when the computer cannot exit
Hibernation ........................................................................................................ 10
Calibrating a battery ........................................................................................................................... 11
Step 1: Fully charge the battery ........................................................................................ 11
Step 2: Disable Hibernation and Sleep .............................................................................. 11
Step 3: Discharge the battery ............................................................................................ 12
Step 4: Fully recharge the battery ...................................................................................... 13
Step 5: Reenable Hibernation and Sleep .......................................................................... 13
Conserving battery power .................................................................................................................. 14
Storing a battery ................................................................................................................................. 15
Disposing of a used battery ................................................................................................................ 16
3 Using external AC power
Connecting the AC adapter ................................................................................................................ 18
4 Shutting down the computer
ENWW iii
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
1 Setting power options
Using power-saving states
CAUTION To prevent possible audio and video degradation, or loss of audio or video playback
functionality, or loss of information, do not initiate Sleep or Hibernation while reading from or
writing to a disc or an external media card.
NOTE You cannot initiate any type of networking communications or perform any computer
functions while the computer is in the Sleep state or in Hibernation.
The computer has two power-saving states enabled at the factory: Sleep and Hibernation.
When you initiate Sleep, the power lights blink and the screen clears. Your work is saved to memory,
letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended
period or the battery reaches a critical low-battery state while in the Sleep state, your work is saved to
the hard drive.
When you initiate Hibernation, your work is saved to a hibernation file on the hard drive and the computer
turns off.
Initiating or exiting Sleep
The system is set at the factory to initiate Sleep after 10 minutes of inactivity when running on battery
power and 25 minutes of inactivity when running on external power.
NOTE Power settings and timeouts can be changed using Power Options in Windows Control
Panel.
With the computer on, you can initiate Sleep in any of the following ways:
●Press fn+f5.
●Close the display.
●Click Start, click the icon next to the Lock button, and then click Sleep.
To exit Sleep, press the power button. When the computer exits Sleep, the power lights turn on and
your work returns to the screen where you stopped working.
NOTE If you have set a password to be required upon wakeup, you must enter your Windows
password before your work will return to the screen.
ENWW Using power-saving states 1
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Initiating or exiting Hibernation
The system is set at the factory to initiate Hibernation after minutes of inactivity or if the battery reaches
a critical low-battery state.
NOTE Power settings and timeouts can be changed using Power Options in Windows Control
Panel.
To initiate Hibernation:
Press the power button.
– or –
a. Click Start, and then click the arrow next to the Lock button.
b. Click Hibernate.
To exit Hibernation, press the power button. The power lights turn on and your work returns to the screen
where you stopped working.
NOTE If you have set a password to be required upon wakeup, you must enter your Windows
password before your work will return to the screen.
2 Chapter 1 Setting power options ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using power plans
A power plan is a collection of system settings that manages how the computer uses power. Power
plans can help you conserve power and maximize performance.
Windows Vista provides 3 power plans:
●Balanced—Balances energy consumption and system performance.
●Power saver—Conserves power by reducing system performance.
●High performance—Provides the highest level of system performance.
You can change the settings of these power plans or create your own power plan.
Viewing the current power plan
Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar.
– or –
Select Start > Control Panel > System and Maintenance > Power Options.
Selecting a different power plan
Click the battery meter icon in the notification area, at the far right of the taskbar, and then select
a power plan from the list.
– or –
Select Start > Control Panel > System and Maintenance > Power Options, and then select a
power plan from the list.
Customizing power plans
1. Click the battery meter icon in the notification area and then click More power options.
– or –
Click Start > Control Panel > System and Maintenance > Power Options.
2. Under the computer's selected power plan, click Change plan settings.
3. Change the Turn off display and Put computer to sleep timeout settings, as needed.
4. To change additional settings, click Change advanced power settings and make your changes.
ENWW Using power plans 3
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Setting a password prompt on wakeup
To set the computer to prompt for a password when the computer exits Sleep:
1. Select Start > Control Panel > System and Maintenance > Power Options.
2. Click Require a password.
3. Click Save changes.
4 Chapter 1 Setting power options ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
2 Using battery power
When a charged battery is in the computer and the computer is not plugged into external power, the
computer runs on battery power. When the computer is plugged into external AC power, the computer
runs on AC power.
If the computer contains a charged battery and is running on external AC power supplied through the
AC adapter, the computer switches to battery power if the AC adapter is disconnected from the
computer.
NOTE The display brightness is decreased to save battery life when you disconnect AC power.
To increase display brightness, use the fn+f8 hotkey or reconnect the AC adapter.
You can keep a battery in the computer or in storage, depending on how you work. Keeping the battery
in the computer whenever the computer is plugged into AC power charges the battery and also protects
your work in case of a power outage. However, a battery in the computer slowly discharges when the
computer is off and unplugged from external power.
WARNING! To avoid potential safety issues, use only the battery provided with the computer,
a replacement battery provided by HP, or a compatible battery purchased as an accessory from
HP.
ENWW 5
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using the battery meter
The battery meter allows you to quickly access power settings and select a different power plan. To
display the percentage of remaining battery charge and the current power plan, move the pointer over
the battery meter icon, located in the notification area at the far right of the taskbar. To access Power
Options or the Mobility Center, or to change the power plan, click the battery meter icon.
The battery meter icon changes shape to indicate whether the computer is running on battery or external
power. The icon also displays a message if the battery has reached a critically low level.
Displaying the remaining battery charge
Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar.
You can view the estimated number of minutes of charge remaining in the Mobility Center. To open
Mobility Center.
The time indicates the approximate running time remaining if the computer continues to consume power
at the current level. For example, the time remaining decreases when playing a DVD and increases
when a DVD stops playing.
Hiding or displaying the battery meter icon
1. Right-click the taskbar, and then click Properties.
2. Click the Notification Area tab.
3. Under System icon, clear the Power check box to hide the battery meter icon, or select the
Power check box to display the battery meter icon.
4. Click OK.
6 Chapter 2 Using battery power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
TBD - I do not
have a unit with
Mobility Center
working, so this
will be updated
at a later date.
Inserting or removing the battery
CAUTION To prevent loss of information when removing a battery that is the sole power source,
initiate Hibernation or turn off the computer before removing the battery.
To insert the battery:
1. Turn the computer upside down on a flat surface.
2. Insert the battery into the battery bay (1) and rotate it downward until it is seated (2).
The battery release latches (3) automatically lock the battery into place.
To remove the battery:
1. Turn the computer upside down on a flat surface.
2. Slide the battery release latches (1) to release the battery.
3. Pivot the battery(2) away from the computer and remove it from the computer (3).
ENWW Inserting or removing the battery 7
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Charging a battery
WARNING! Do not charge the computer battery while you are onboard aircraft.
The battery charges whenever the computer is plugged into external power through an AC adapter, an
optional expansion product, or an optional power adapter.
The battery charges whether the computer is off or in use, but it charges faster while the computer is
off.
Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer
or cooler than room temperature.
To prolong battery life and optimize the accuracy of battery charge displays, follow these
recommendations:
●If you are charging a new battery, charge it fully before turning on the computer.
●Charge the battery until the battery light turns off.
NOTE If the computer is on while the battery is charging, the battery meter in the
notification area may show 100 percent charge before the battery is fully charged.
●Allow the battery to discharge below 5 percent of a full charge through normal use before charging
it.
●If the battery has been unused for one month or more, calibrate the battery instead of simply
charging it.
The battery light displays charge status:
●On: The battery is charging.
●Blinking: The battery has reached a low-battery condition and is not charging.
●Off: The battery is fully charged or not installed.
8 Chapter 2 Using battery power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Managing low-battery conditions
The information in this section describes the alerts and system responses set at the factory. Some low-
battery condition alerts and system responses can be changed using Power Options in Windows Control
Panel. Preferences set using Power Options do not affect lights.
Identifying low-battery conditions
When a battery that is the sole power source for the computer reaches a low-battery condition, the
battery light blinks.
If a low-battery condition is not resolved, the computer enters a critical low-battery condition, and the
battery light continues to blink.
In a critical low-battery condition:
●If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
Hibernation.
●If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly
in the Sleep state, and then shuts down and loses any unsaved information.
ENWW Managing low-battery conditions 9
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Resolving a low-battery condition
CAUTION To reduce the risk of losing information when the computer reaches a critical low-
battery condition and has initiated Hibernation, do not restore power until the power lights turn
off.
Resolving a low-battery condition when external power is available
Connect one of the following devices:
●AC adapter
●Optional expansion product
●Optional power adapter
Resolving a low-battery condition when a charged battery is available
1. Turn off the computer or initiate Hibernation.
2. Remove the discharged battery, and then insert a charged battery.
3. Turn on the computer.
Resolving a low-battery condition when no power source is available
Initiate Hibernation.
– or –
Save your work and shut down the computer.
Resolving a low-battery condition when the computer cannot exit Hibernation
When the computer lacks sufficient power to exit Hibernation:
1. Insert a charged battery or plug the computer into external power.
2. Exit Hibernation by pressing the power button.
10 Chapter 2 Using battery power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Calibrating a battery
NOTE It is not necessary to calibrate a new battery.
Even if a battery is heavily used, it should not need to be calibrated more than once a month. Calibrate
a battery under the following conditions:
●When battery charge displays seem inaccurate
●When you observe a significant change in battery run time
●When the battery has been unused for one month or more
Three steps are involved in calibrating a battery: fully charging, discharging, and then fully recharging.
Step 1: Fully charge the battery
WARNING! Do not charge the computer battery while you are onboard aircraft.
NOTE A battery can charge whether the computer is off or in use, but it will charge faster when
the computer is off.
To fully charge the battery:
1. Insert the battery into the computer.
2. Connect the computer to an AC adapter, optional power adapter, optional expansion product, or
optional docking device, and then plug the adapter or device into external power.
The battery light on the computer turns on.
3. Leave the computer plugged into external power until the battery is fully charged.
The battery light on the computer is turns off.
Step 2: Disable Hibernation and Sleep
1. Click the battery meter icon in the notification area, and then click More power options.
– or –
Click Start > Control Panel > System and Maintenance > Power Options.
2. Under the current power plan, click Change this plan.
3. Record the Turn off display and Put computer to sleep settings listed in the On battery column
so that you can reset them after the calibration.
4. Change the Turn off display and Put computer to sleep settings to Never.
5. Click Change advanced power settings.
6. Click the plus sign next to Sleep, and then click the plus sign next to Hibernate after.
7. Record the On battery setting under Hibernate after so that you can reset it after the calibration.
8. Change the On battery setting to Never.
ENWW Calibrating a battery 11
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
9. Click OK.
10. Click Save settings.
Step 3: Discharge the battery
The computer must remain on while the battery is being discharged. The battery can discharge whether
or not you are using the computer but will discharge faster while the computer is in use.
●If you plan to leave the computer unattended during the discharge, save your information before
beginning the discharge procedure.
●If you use the computer occasionally during the discharge procedure and have set energy-saving
timeouts, expect the following performance from the system during the discharge process:
●The monitor will not turn off automatically.
●Hard drive speed will not decrease automatically when the computer is idle.
●System-initiated Hibernation will not occur.
To discharge a battery:
1. Unplug the computer from its external power source, but do not turn off the computer.
2. Run the computer on battery power until the battery is discharged. The battery light begins to blink
when the battery has discharged to a low-battery condition. When the battery is discharged, the
battery light turns off and the computer shuts down.
12 Chapter 2 Using battery power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Step 4: Fully recharge the battery
To recharge the battery:
1. Plug the computer into external power and maintain external power until the battery is fully
recharged. When the battery is recharged, the battery light on the computer turns off.
You can use the computer while the battery is recharging, but the battery will charge faster if the
computer is off.
2. If the computer is off, turn it on when the battery is fully charged and the battery light has turned
off.
Step 5: Reenable Hibernation and Sleep
CAUTION Failure to reenable Hibernation after calibration may result in a full battery discharge
and potential information loss.
1. Right-click the Power Meter icon in the notification area, at the far right of the taskbar, and then
click Adjust Power Properties.
– or –
Select Start > Control Panel > Performance and Maintenance > Power Options.
2. Reenter the settings that you recorded for the items in the On battery column.
3. Click Change advanced power settings.
4. Click the plus sign next to Sleep, and then the plus sign next to Hibernate after.
5. Reenter the setting that you recorded for On battery.
6. Click OK.
7. Click Save settings.
ENWW Calibrating a battery 13
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Conserving battery power
●Use the operating system to select a power plan with low power-use settings.
●Turn off wireless and local area network (LAN) connections and exit modem applications when you
are not using them.
●Disconnect external devices that are not plugged into an external power source, if you are not using
them.
●Stop, disable, or remove any external media cards that you are not using.
●Use the fn+f8 and fn+f7 hotkeys to adjust screen brightness as needed.
●Use optional powered speakers instead of the internal speakers, or adjust speaker volume as you
needed.
●If an external display device is connected to the computer, press fn+f4 to switch the screen image
from the computer display to the external display.
●If you leave your work, initiate Sleep or Hibernation, or shut down the computer.
14 Chapter 2 Using battery power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Storing a battery
CAUTION To prevent damage to a battery, do not expose it to high temperatures for extended
periods of time.
If a computer will be unused and unplugged from external power for more than 2 weeks, remove the
battery and store it separately.
To prolong the charge of a stored battery, place it in a cool, dry place.
Calibrate a battery before using it if it has been stored for one month or more.
ENWW Storing a battery 15
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Disposing of a used battery
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery;
short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a
battery to temperatures above 60˚C (140˚F). Replace the battery only with a battery approved
for this computer.
Refer to the Regulatory, Safety, and Environmental Notices for battery disposal information.
16 Chapter 2 Using battery power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
3 Using external AC power
External AC power is supplied through one of the following devices:
●AC adapter included with the computer
●Optional docking device or expansion product
●Optional power adapter
Connect the computer to external AC power under any of the following conditions:
●When you are charging or calibrating a battery pack.
WARNING! Do not charge the computer battery while you are onboard aircraft.
●When you are installing or modifying system software.
●When you are writing information to a CD or DVD.
When you connect the computer to external AC power, the following events occur:
●The battery begins to charge.
●If the computer is turned on, the battery meter icon in the notification area changes appearance.
When you disconnect external AC power, the following events occur:
●The computer switches to battery power.
●The display brightness is automatically decreased to save battery life. To increase display
brightness, press the fn+f8 hotkey or reconnect the AC adapter.
ENWW 17
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Connecting the AC adapter
WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from the AC outlet (not by
unplugging the power cord from the computer).
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed)
3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin
adapter. The grounding pin is an important safety feature.
To connect the computer to external AC power:
1. Plug the AC adapter into the power connector (1) on the computer.
2. Plug the power cord into the AC adapter (2).
3. Plug the other end of the power cord into an AC outlet (3).
18 Chapter 3 Using external AC power ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
4 Shutting down the computer
CAUTION Shutting down the computer results in the loss of unsaved information.
The Shut Down command closes all open programs, including the operating system, and then turns off
the display and computer.
Shut down the computer under any of the following conditions:
●When you need to replace the battery or access components inside the computer.
●When you are connecting an external hardware device that does not connect to a USB port or a
1394 port.
●When you have installed a program or update that requires Windows to restart to complete the
installation.
●When the computer will be unused and disconnected from external power for an extended period.
To shut down the computer:
NOTE If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or
Hibernation before shutdown is possible.
1. Save your work and close all open programs.
2. Click Start, and then click the arrow next to the Lock button.
3. Click Shut Down.
If the computer is unresponsive and you are unable to use normal Windows shutdown procedures, try
the following emergency procedures in the sequence provided:
●Press ctrl+alt+delete. Then, click the arrow next to the power button icon and click Shut Down.
●Press and hold the power button for at least 5 seconds.
●Disconnect the computer from external power and remove the battery.
ENWW 19
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Quick Reference
HP Entertainment PC
For more information about your computer, select Start >
Help and Support > User Guides.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Quick Reference
HP Notebook PC
First Edition: January 2007
Document Part Number: 431182-001
Quick Reference v
Contents
1 Finding Information
Finding the Help and Support Center (Start > Help and
Support) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Finding the user guides (Start > Help and Support > User
Guides) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Identifying installed software and hardware . . . . . . . . . . 1–2
2 Next steps
Creating recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Protecting the computer . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Protecting the computer from viruses . . . . . . . . . . . . 2–1
Protecting your system files . . . . . . . . . . . . . . . . . . . 2–2
Protecting your privacy . . . . . . . . . . . . . . . . . . . . . . . 2–2
Protecting the computer from power surges . . . . . . . 2–3
Using the computer safely . . . . . . . . . . . . . . . . . . . . . 2–3
Connecting to the Internet . . . . . . . . . . . . . . . . . . . . . . . . 2–4
Choosing the type of Internet access available . . . . . 2–5
Choosing an ISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Installing additional software and hardware . . . . . . . . . . 2–7
Updating the software installed on the computer. . . . . . . 2–8
Turning off the computer correctly . . . . . . . . . . . . . . . . . 2–8
3 Troubleshooting
Troubleshooting resources . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Quick troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
The computer is unable to start up. . . . . . . . . . . . . . . 3–1
vi Quick Reference
Contents
The computer screen is blank . . . . . . . . . . . . . . . . . . 3–2
Software is functioning abnormally . . . . . . . . . . . . . 3–3
The computer is turned on but not responding . . . . . 3–4
The computer is unusually warm. . . . . . . . . . . . . . . . 3–4
An external device is not working. . . . . . . . . . . . . . . 3–5
The home wireless network connection is not working . .
3–5
Contacting Customer Care . . . . . . . . . . . . . . . . . . . . . . . . 3–6
4 Software backup and recovery
Backing up your information . . . . . . . . . . . . . . . . . . . . . . 4–2
When to back up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Back up suggestions . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Using system restore points . . . . . . . . . . . . . . . . . . . . . . . 4–3
When to create restore points . . . . . . . . . . . . . . . . . . 4–3
Create a system restore point. . . . . . . . . . . . . . . . . . . 4–3
Restore to a previous date and time. . . . . . . . . . . . . . 4–4
Creating recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4
Reinstalling software programs and drivers. . . . . . . . . . . 4–5
Reinstalling preinstalled programs or drivers . . . . . . 4–6
Reinstalling programs from discs . . . . . . . . . . . . . . . 4–6
Performing a recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Recovering from the recovery discs . . . . . . . . . . . . . 4–7
Recovering from the partition on the hard drive . . . . 4–7
Deleting the recovery partition on the hard drive . . . . . . 4–8
Updating reinstalled software . . . . . . . . . . . . . . . . . . . . . 4–9
A Using the optical drive
Inserting an optical disc . . . . . . . . . . . . . . . . . . . . . . . . . . A–1
Removing an optical disc (with power) . . . . . . . . . . . . . . A–2
Removing an optical disc (without power) . . . . . . . . . . . A–2
B Specifications
Operating environment. . . . . . . . . . . . . . . . . . . . . . . . . . . B–1
Contents
Quick Reference vii
Rated input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2
Expansion port 3 input/output signals (select models only) . .
B–3
C Routine Care
Cleaning the display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1
Cleaning the TouchPad and keyboard . . . . . . . . . . . . . . . C–1
Traveling and shipping. . . . . . . . . . . . . . . . . . . . . . . . . . . C–2
Index
viii Quick Reference
Contents
Quick Reference 1–1
1
Finding Information
Finding the Help and Support Center
(Start > Help and Support)
You can access the Help and Support Center by selecting Start >
Help and Support. In addition to providing information about
the operating system, the Help and Support Center covers these
topics:
■Your computer, such as model and serial number, installed
software, hardware components, and specifications.
■How to help safeguard your computer.
■How to get the best performance from the battery.
■How to set up a wireless network.
■Links to community forums of IT experts.
Finding the user guides (Start > Help
and Support > User Guides)
User guides, regulatory and safety notices, and other information
resources about using the computer are available through the
Help and Support Center.
To access the user guides:
»Select Start > Help and Support > User Guides.
1–2 Quick Reference
Finding Information
Identifying installed software and
hardware
The computer includes software that is preinstalled on the hard
drive. To see a list of the software:
1. Select Start > All Programs.
2. Double-click the program you want to open.
✎For details about using software included with the computer,
refer to the software manufacturer’s instructions, which may be
provided on disc, as online Help files, or on the manufacturer’s
Web site.
To see a list of hardware installed on the computer:
1. Select Start > Computer.
2. Click the Properties tab and, in the left pane, click Device
Manager.
3. In the User Account Control dialog box, click Continue.
✎You can modify your device configurations using Device
Manager.
Quick Reference 2–1
2
Next steps
Creating recovery discs
After setting up the computer for the first time, it is recommended
that you create a set of recovery discs of the full factory image.
The recovery discs are used to start up (boot) the computer and
recover the operating system and software to factory settings in
case of system failure or instability.
For information on how to create a set of recovery discs, refer to
Chapter 4, “Creating recovery discs.”
Protecting the computer
The information in this section is designed to protect your
computer from damage caused by a virus, a security breach, a
power surge, unsafe operation, or system failure.
Protecting the computer from viruses
When you use the computer for e-mail, network, or Internet
access, you expose it to computer viruses that can disable the
operating system, applications, or utilities or cause them to
function abnormally.
Antivirus software can detect most viruses, destroy them, and
in most cases repair damage they have caused. To provide
ongoing protection against newly discovered viruses, antivirus
software must be kept up to date.
2–2 Quick Reference
Next steps
Norton Internet Security is preinstalled on the computer:
■Your version of Norton Internet Security includes 60 days of
free updates. It is strongly recommended that you protect the
computer against new viruses beyond 60 days by purchasing
extended update service.
■For information about using and updating Norton Internet
Security and for purchasing extended update service, select
Start > All Programs > Norton Internet Security > Help
and Support.
■To access Norton Internet Security, select Start > All
Programs > Norton Internet Security.
Protecting your system files
The operating system and PC Recovery software provide several
ways to back up the system and to recover optimal system
functionality. For additional information, refer to Chapter 4,
“Software backup and recovery.”
Protecting your privacy
When you use the computer for e-mail, network, or Internet
access, it is possible for unauthorized persons to obtain
information about you or your computer.
To optimize the privacy protection features:
■Keep the operating system and software updated. Many
software applications contain security enhancements.
■Use a firewall. A firewall is software that monitors incoming
traffic on the computer. Some firewalls also monitor outgoing
traffic.
Next steps
Quick Reference 2–3
Protecting the computer from power surges
To protect the computer from the power surges that may be
caused by an uncertain power supply or an electrical storm,
observe these practices:
■Plug the computer power cord into an optional, high-quality
surge protector. Surge protectors are available from most
computer or electronics retailers.
■During an electrical storm, either run the computer on battery
power or shut down the computer and unplug the power cord.
■If applicable to your location, provide surge protection on the
modem cable that connects the modem to a telephone line.
Telephone line surge protectors are available from computer
or electronics retailers in some regions.
Using the computer safely
ÅWARNING: To reduce the risk of electric shock or damage to your
equipment:
■Plug the power cord into an AC outlet that is easily accessible at all
times.
■Disconnect power from the computer by unplugging the power cord
from the AC outlet (not by unplugging the power cord from the
computer).
■If provided with a 3-pin attachment plug on your power cord, plug
the cord into a grounded (earthed) 3-pin outlet. Do not disable the
power cord grounding pin, for example, by attaching a 2-pin
adapter. The grounding pin is an important safely feature.
ÅWARNING: To reduce the risk of serious injury, read the Safety and
Comfort Guide. It describes proper workstation setup and proper posture,
health, and work habits for computer users. The Safety and Comfort Guide
also provides important electrical and mechanical safety information. This
guide is available on the Web at http://www.hp.com/ergo and in the Help
and Support Center. To access the Help and Support Center, select
Start > Help and Support > User Guides, or refer to a User Guides
disc included with some models.
2–4 Quick Reference
Next steps
ÅWARNING: To avoid potential discomfort or burns, do not block the air
vents or place the computer on your lap for extended periods. Also, do not
allow the AC adapter to contact the skin for extended periods during
operation. The computer is designed to run demanding applications
at full power. As a result of increased power consumption, it is normal for
the computer and the AC adapter to feel warm or hot when used
continuously. The computer and the AC adapter comply with the
user-accessible surface temperature limits defined by the International
Standard for Safety of Information Technology Equipment (IEC 60950).
ÅWARNING: To reduce potential safety issues, use only the AC adapter or
battery provided with the computer, a replacement AC adapter or battery
provided by HP, or a compatible AC adapter or battery purchased as an
accessory from HP.
For more safety and regulatory information, and for battery
disposal information, refer to the Regulatory, Safety and
Environmental Notices located in the Help and Support Center.
To access the Help and Support Center, select Start > Help and
Support > User Guides.
Connecting to the Internet
Your computer includes hardware and software that allows you
to connect to the Internet. The following sections of this guide
give more information about these tasks:
■Choosing the type of Internet connection you want, such as
broadband, wireless, or dial-up, and connect the hardware.
■Choosing an Internet service provider (ISP).
✎Internet hardware and software features vary depending on
computer model and your location.
Next steps
Quick Reference 2–5
Choosing the type of Internet access
available
There are 3 basic types of Internet access:
■Broadband—High-speed Internet service providers include
the following types of connections:
❏Cable modem
❏Digital Subscriber Line (DSL)
❏Satellite
❏Other services
For broadband access, additional hardware and/or software
must be provided by your ISP.
■Wireless—For high-speed mobile Internet access, you can
use a wireless connection.
❏To learn about setting up wireless access, visit the HP
Network Assistant at http://www.hp.com/go/techcenter/wireless
(English only).
❏To access Wireless Home Network Setup and for
instructions on using this software, select Start > Help
and Support.
■Dial-up—You can access the Internet by dialing into a
service provider using a modem cable connected to the RJ-11
(modem) jack.
Choosing an ISP
You must set up Internet service before you can connect to the
Internet. The computer includes software features to help you set
up a new Internet account or configure the computer to use an
existing account:
■Easy Internet Sign-up (available in some locations)
2–6 Quick Reference
Next steps
■ISP-provided icons (available in some locations)
■Microsoft® Windows® New Connection Wizard (available
in all locations)
Using Easy Internet Sign-up
If the Easy Internet Sign-up utility is supported in the country in
which you purchased the computer, you can access the utility by
using either of the following methods:
■Double-click the Easy Internet Sign-up icon on the
Windows desktop.
– or –
■Select Start > All Programs > Online Services > Easy
Internet Sign-up.
The Easy Internet Sign-up provides these tasks:
■Signing up for a new Internet account
■Configuring the computer to use an existing account
Using ISP-provided icons
If ISP-provided icons are supported in the country in which you
purchased the computer, the icons may be displayed either
individually on the Windows desktop or grouped in a desktop
folder named Online Services.
To set up a new Internet account or configure the computer to use
an existing account:
»Double-click an icon, and then follow the instructions on
the screen.
Using the Windows New Connection Wizard
You can use the Windows New Connection Wizard to connect to
the Internet in any of these situations:
■If you already have an account with an ISP.
Next steps
Quick Reference 2–7
■If you have a disc from an ISP.
■If you do not have an Internet account and would like to
select an ISP from the list provided within the wizard. (The
list of ISP providers is not available in all regions.)
■If you have selected an unlisted ISP and the ISP has provided
you with such information as a specific IP address and POP3
and SMTP settings.
To access the Windows New Connection Wizard and instructions
for using the wizard, follow this step:
»Select Start > Help and Support.
✎If you are prompted within the wizard to choose between
enabling or disabling Windows Firewall, choose to enable the
firewall.
Installing additional software and
hardware
To install any additional software from a CD or DVD, follow
these steps:
1. Insert the disc into the optical drive.
2. When the installation wizard opens, follow the on-screen
instructions.
3. Restart the computer if prompted to do so.
✎For details about using the software, refer to the manufacturer’s
instructions, which may be provided on disc, as online Help
files, or on the manufacturer’s Web site.
To install additional hardware, such as an optional printer, follow
the instructions provided by the hardware manufacturer to install
the device and any required drivers.
2–8 Quick Reference
Next steps
Updating the software installed on the
computer
Most software, including the operating system, is updated
frequently by the manufacturer or provider. Important updates to
the software included with the computer may have been released
since the computer left the factory.
Some updates may affect the way the computer responds to
optional software or external devices. Many updates provide
security enhancements.
Update the operating system and other software provided on the
computer as soon as the computer is connected to the Internet.
To access update links for the operating system and other
software provided on the computer, follow this stepr:
»Select Start > Help and Support.
Turning off the computer correctly
Whenever possible, turn off the computer by using the standard
shutdown procedure:
1. Save your work and close all open applications.
2. Shut down the computer through the operating system:
a. Click Start.
b. Click the arrow next to the Lock button, and then click
Shut Down.
If you are unable to turn off the computer with these procedures,
try the following emergency procedures in the sequence
provided:
ÄCAUTION: Emergency shutdown procedures result in the loss of
unsaved information.
Next steps
Quick Reference 2–9
■Press ctrl+alt+delete. Then, in the lower-right corner of the
screen, click the Power button.
■Press and hold the power button for at least 5 seconds.
■Disconnect the computer from external power and remove the
battery.
Quick Reference 3–1
3
Troubleshooting
Troubleshooting resources
If you experience computer problems, follow the troubleshooting
steps below:
1. Refer to “Quick troubleshooting,” next in this chapter.
2. Access additional information about the computer and Web
site links through the Help and Support Center. Select Start >
Help and Support.
✎Although many checkup and repair tools require an Internet
connection, other tools can help you fix a problem when
the computer is offline.
3. Contact Customer Care for further assistance.
Quick troubleshooting
The computer is unable to start up
To turn on the computer, press the power button. When the
computer is turned on, the power lights are turned on.
If the computer and the power lights are not turned on when you
press the power button, adequate power may not be available to
the computer.
3–2 Quick Reference
Troubleshooting
The suggestions below may help you determine the reason the
computer will not start up:
■If the computer is plugged into an AC outlet, be sure that the
AC outlet is providing adequate power by plugging another
electrical device into the outlet.
■If the computer is running on battery power or is plugged
into an external power source other than an AC outlet, plug
the computer into an AC outlet using the AC adapter. Be sure
that the power cord and AC adapter connections are secure.
■If the computer is running on battery power, try these
suggestions:
❏Remove the primary battery and optional accessory
battery (if applicable) and plug the computer into an AC
outlet using the AC adapter. If the computer starts up, one
of the batteries may need to be replaced.
❏If the battery light on the front of the computer is blinking,
the battery has reached a low-battery condition, which
may not allow the computer to start up. Plug the computer
into an AC outlet using the AC adapter to start the
computer and allow the battery to charge.
The computer screen is blank
If you have not turned off the computer but the screen is blank,
one or more of the following may be the cause:
■The computer may be in the Sleep state or Hibernation.
■The computer may not be set to display the image on the
computer screen.
■The display switch may not be functioning properly.
Troubleshooting
Quick Reference 3–3
The suggestions below may help you determine the reason the
computer screen is blank.
■To exit Sleep or Hibernation, briefly press the power button.
Sleep and Hibernation are energy-saving features that can turn
off the display. Sleep and Hibernation can be initiated by the
system while the computer is in Windows but is not in use, or
when the computer has reached a low-battery condition. To
change these and other power settings, select
Start > Control
Panel > System and Maintenance > Power Options
.
■To transfer the image to the computer screen, press fn+f4.
On most models, when an optional external display device,
such as a monitor, is connected to the computer, the image
can be displayed on the computer screen or the external
display, or on both devices simultaneously. When you press
fn+f4 repeatedly, the image alternates among the computer
display, one or more external display devices, and
simultaneous display on all devices.
Software is functioning abnormally
If the software becomes unresponsive or responds abnormally,
follow these suggestions:
■Restart the computer:
a. Click Start.
b. Click the arrow next to the Lock button, and then click
Restart.
If you cannot restart the computer using this procedure, refer
to the next section, “The computer is turned on but not
responding.”
■Run a virus scan. For information about using the antivirus
resources on the computer, refer to “Protecting the computer
from viruses” in Chapter 2.
3–4 Quick Reference
Troubleshooting
The computer is turned on but not responding
If the computer is turned on but not responding to software or
keyboard commands, try turning off the computer by using the
standard shutdown procedure:
1. Save your work and close all open applications.
2. Shut down the computer through the operating system:
a. Click Start.
b. Click the arrow next to the Lock button, and then click
Shut Down.
✎If you have been registered to a network domain, the button
you click will be called Shut Down instead of Turn Off
Computer.
If you are unable to shut down the computer with this procedure,
try the following emergency shutdown procedures:
ÄCAUTION: Emergency shutdown procedures result in the lost of unsaved
information.
1. Press ctrl+alt+delete. Then, in the lower-right corner of the
screen, click the Power button.
– or –
Press and hold the power button for at least 5 seconds.
2. Disconnect the computer from external power and remove the
battery.
The computer is unusually warm
■It is normal for the computer to feel warm to the touch while
it is in use. But if the computer feels unusually warm, it may
be overheating because a vent is blocked.
ÄTo prevent overheating, do not obstruct vents. Use the
computer only on a hard, flat surface. Do no allow another
hard surface, such as an adjoining printer, or a soft surface,
such as pillows or thick rugs or clothing, to block airflow.
Troubleshooting
Quick Reference 3–5
■If you suspect that the computer is overheating, allow the
computer to cool to room temperature. Then be sure to keep
all vents free from obstructions while you are using the
computer.
✎The fan in the computer starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
An external device is not working
If an external device does not function as expected, follow these
suggestions:
■Turn on the device as instructed in the device user guide.
Some devices may not be powered by the computer, and must
be turned on before the computer is turned on.
■Check the following conditions:
❏All device connections are secure.
❏The device is receiving electrical power.
❏
The device, especially if it is an older one, is compatible
with the operating system. For compatibility information,
refer to the device manufacturer’s Web site.
❏The correct drivers are installed and updated. Drivers may
be available on a CD included with the device or on the
device manufacturer’s Web site. For more information
about updating drivers, select Start > Help and Support.
The home wireless network connection is
not working
If a home wireless network connection is not working as expected,
follow these suggestions:
■Be sure that the wireless device is turned on and the wireless
light on the computer is blue. If the light is amber, press the
wireless button to turn on the wireless device.
3–6 Quick Reference
Troubleshooting
■Be sure that the computer wireless antennae are free from
obstructions.
■Be sure that the cable or DSL modem and its power cord are
properly connected, and that the lights are on.
■Be sure that the wireless router (access point) is properly
connected to its power adapter and the cable modem, and that
the lights are on.
■Disconnect and then reconnect all cables, and turn the power
off and then back on.
✎
For information on setting up a home wireless network connection,
visit
http://www.hp.com/go/techcenter/wireless
(English only).
Contacting Customer Care
If you are unable to find the help you need by using the Help and
Support Center, you may need to contact Customer Care.
For the fastest possible resolution of your problem, have the
computer and the following information available when you call
or e-mail:
■Product name located on the display or keyboard.
■Serial number (s/n) listed on the service tag.
❏The service tag label is on the bottom of the computer.
❏To display the service tag information on the computer
screen, select Start > Help and Support > My HP
Computer.
■Date the computer was purchased.
■Conditions under which the problem occurred.
■Error messages that have been displayed.
■The manufacturer and model of a printer or other accessories
connected to the computer.
Troubleshooting
Quick Reference 3–7
■Operating system version number and registration number.
To display the operating system version number and
registration number, select Start > Help and Support > My
HP Computer. (On some models, the registration number
may be identified in the Operating System table as the
Product Id).
If the computer is connected to the Internet, select Start > Help
and Support to get help by e-mail or to access Customer Care
telephone numbers.
3–8 Quick Reference
Troubleshooting
Quick Reference 4–1
4
Software backup and recovery
Tools provided by the operating system and PC Recovery
software are designed to help you with the following tasks for
safeguarding your information and restoring it in case of a system
failure:
■Back up your information regularly to protect your important
system files.
■Make a set of recovery discs (PC Recovery software feature).
Recovery discs are used to start up (boot) your computer and
restore the operating system and software programs to factory
settings in case of system failure or instability.
■Create system restore points (operating system feature).
System restore points allow you to reverse undesirable
changes to your computer by restoring the computer to an
earlier state.
■Recover a program or driver (PC Recovery software feature).
This feature helps you reinstall a program or driver without
performing a full system recovery.
■Perform a full system recovery (PC Recovery software
feature). With PC Recovery, you can recover your full factory
image if you experience system failure or instability. PC
Recovery works from a dedicated recovery partition on the
hard drive or from recovery discs you create.
4–2 Quick Reference
Software backup and recovery
Backing up your information
When to back up
■On a regularly scheduled basis.
✎Set reminders to back up your information regularly.
■Before the computer is repaired or restored.
■Before you add or modify hardware or software.
Back up suggestions
■Create system restore points using the Windows XP
Professional System Restore feature.
■Store personal files in the My Documents folder and back up
these folders periodically.
■Back up templates stored in their associated programs.
■Save customized settings in a window, toolbar, or menu bar
by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your
preferences.
To copy the screen and paste it into a word-processing
document:
a. Display the screen.
Software backup and recovery
Quick Reference 4–3
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c. To paste the copied images into a document, open a
word-processing document, and then select Edit > Paste.
Using system restore points
When you back up your system, you are creating a system restore
point. A system restore point allows you to save and name a
snapshot of your hard drive at a specific point in time. You can
then recover back to that point if you want to reverse subsequent
changes made to your system
✎Recovering to an earlier restore point does not affect data files
saved or e-mails created since the last restore point.
When to create restore points
■Before you add or extensively modify software or hardware.
■Periodically, whenever the system is performing optimally.
✎If you revert to a restore point and then change your mind,
you can reverse the restoration.
Create a system restore point
1. Select Start > Help and Support, and then click System
Restore.
The System Restore window opens.
2. Click Create a restore point, and then click Next.
3. Follow the on-screen instructions.
4–4 Quick Reference
Software backup and recovery
Restore to a previous date and time
To revert to a restore point (created at a previous date and time),
when the computer was functioning optimally:
1. Select Start > Help and Support, and then click System
Restore.
The System Restore window opens.
2. Click Restore my computer to an earlier time, and then
click Next.
3. Follow the on-screen instructions.
Creating recovery discs
PC Recovery Disc Creator creates a set of recovery CDs or DVDs
for the computer. Use recovery discs to restore the operating
system and software programs to factory settings, in case of
system failure or instability.
✎Handle these discs carefully and keep them in a safe place. The
software allows the creation of only one set of recovery discs.
Note the following guidelines before creating recovery discs:
■You will need high-quality CD-R, DVD-R, or DVD+R media
(purchased separately).
✎Formatted DVD±RW and DVD±RW double-layer discs
are not compatible with the PC Recovery Disc Creator
software.
■The computer must be connected to AC power during this
process.
■Only one set of recovery discs can be created per computer.
■Number each disc before inserting it into the computer
optical drive.
Software backup and recovery
Quick Reference 4–5
■If necessary, you can exit the program before you have
finished creating the recovery discs. The next time you open
PC Recovery Disc Creator, you will be prompted to continue
the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > System Recovery > PC
Recovery Disc Creator.
The PC Recovery Disc Creator tool opens.
2. Click Next.
✎If you are operating the computer on battery power, you will
be prompted to connect to AC power before you can go to
the next step.
3. Select the type of disc you want to use, and then click Next.
✎The software examines the image and displays the number
of blank discs needed to create your recovery discs.
4. Insert the first disc and follow the on-screen instructions to
complete the creation of the recovery discs.
Reinstalling software programs and
drivers
If a program or driver preinstalled at the factory is accidentally
erased or is damaged, the Application and Driver Recovery tool
allows you to reinstall it.
✎Software not provided with this computer must be reinstalled
from the disc provided by the manufacturer or downloaded from
the manufacturer’s Web site.
✎Before reinstalling the program, be sure it is fully uninstalled.
The Application and Driver Recovery tool replaces corrupted
system files and reinstalls deleted system files within the
program.
4–6 Quick Reference
Software backup and recovery
■In most cases, if the program you are reinstalling is still on
your computer, the reinstallation process does not affect your
personal settings.
■In all cases, if a program has been deleted from your
computer, the reinstallation process reinstalls the program or
utility to the factory image but cannot restore your personal
settings.
Reinstalling preinstalled programs or
drivers
1. Remove the program or driver:
✎In some cases, drivers are not listed in the Add or Remove
Programs list. If the driver is not listed, it does not need to
be removed.
a. Select Start > Control Panel > Add or Remove
Programs.
b. Click the program or driver you want to remove, and then
click Change/Remove.
2. Select Start > All Programs > System Recovery >
Application and Driver Recovery.
The Application and Driver Recovery tool opens.
3. Select Application Installation or Driver Installation, and
then click Next.
4. Follow the on-screen instructions to complete the program or
driver recovery.
5. Restart the computer if prompted.
Reinstalling programs from discs
1. Insert the disc into the optical drive.
Software backup and recovery
Quick Reference 4–7
2. When the installation wizard opens, follow the installation
instructions on the screen.
3. Restart the computer if prompted.
Performing a recovery
PC Recovery software allows you to repair or restore the system
if you experience system failure or instability. PC Recovery
works from recovery discs that you create or from a dedicated
recovery partition on the hard drive.
✎Windows XP has its own built-in repair features, such as System
Restore and driver roll-back capabilities. If you have not already
tried these features, try them before using PC Recovery.
✎PC Recovery only recovers software that was preinstalled at the
factory. Software not provided with this computer must be
reinstalled from the disc provided by the manufacturer or
downloaded from the manufacturer’s Web site.
Recovering from the recovery discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart
the computer.
3. Follow the on-screen instructions.
Recovering from the partition on the hard
drive
You can perform a recovery from the partition on the hard drive
from either the Start button or f11.
To restore the system from the partition:
4–8 Quick Reference
Software backup and recovery
1. Access the PC Recovery tool:
❏To access PC Recovery from the Start button, select
Start > All Programs > System Recovery > PC
Recovery.
❏To access PC Recovery from f11, restart the computer and
press f11 while the “Press <F11> for recovery” message is
displayed on the screen.
The PC Recovery tool opens.
2. Select PC Recovery, and then click Next.
The computer restarts and the PC Recovery tool opens.
3. Click OK.
4. Follow the on-screen instructions to complete the system
recovery.
If you want to perform a destructive recovery:
✎A destructive recovery formats the hard drive and restores
the computer to its factory state. Select this option only as a
last restort.
a. Click Advanced Options in the System Recovery screen.
b. Select Destructive Recovery and follow the on-screen
instructions.
Deleting the recovery partition on the
hard drive
The PC Recovery Advanced Options menu provides the option of
deleting the recovery partition, which will increase space on the
hard drive. Delete the recovery partition only if you have already
created recovery discs.
ÄCAUTION: After you create the recovery discs, you can increase space
on the hard drive by deleting the recovery partition. However, doing this is
not recommended. If you delete this partition, you will lose any information
that is on the partition, including the PC Recovery software. Thereafter, you
must use the recovery discs to access PC Recovery software.
Software backup and recovery
Quick Reference 4–9
To delete the recovery partition:
1. If you have not already created recovery discs, create
them now.
2. Select Start > All Programs > System Recovery > PC
Recovery.
The PC Recovery tool opens.
3. Select PC Recovery, and then click Next.
The computer restarts and the PC Recovery tool opens.
4. Click OK.
5. At the System Recovery screen, click Advanced Options.
6. Select Delete Recovery Partition (not recommended) and
follow the on-screen instructions.
Updating reinstalled software
After you perform a system recovery, connect to the Internet to
update all reinstalled software.
To access update links for the operating system and other
software provided on your computer:
»Select Start > Help and Support.
To update optional software, follow the instructions provided by
the software manufacturer. Some programs include an update
feature you can access from a Help button or menu within the
program.
4–10 Quick Reference
Software backup and recovery
Quick Reference A–1
A
Using the optical drive
Inserting an optical disc
To insert an optical disc:
1. Turn on the computer.
2. Press the optical drive release button on the drive bezel to
release the media tray, and then pull out the tray.
3. Hold the CD or DVD by the edges to avoid touching the flat
surfaces, and position the disc over the tray spindle, which is
located in the center of the tray, with the label side up.
✎If the tray is not fully accessible, tilt the disc carefully to
position it over the spindle.
4. Gently press the disc down onto the tray spindle until the disc
snaps into place.
5. Close the media tray.
✎After you insert a disc, a short pause is normal. If you have not
selected a default media player, an AutoPlay dialog box opens. It
prompts you to select how you want to use the media content.
A–2 Quick Reference
Using the optical drive
Removing an optical disc (with power)
To remove an optical disc if the computer is running on external
or battery power, follow these steps:
1. Turn on the computer.
2. Press the optical drive release button on the drive bezel to
release the media tray, and then pull out the tray.
3. Remove the disc from the tray by gently pressing down on the
spindle while lifting the outer edges of the disc. Hold the disc
by the edges and avoid touching the flat surfaces.
✎If the tray is not fully accessible, tilt the disc carefully as you
remove it.
4. Close the media tray and place the disc in a protective case.
Removing an optical disc
(without power)
To remove an optical disc if external or battery power is
unavailable, follow these steps:
1. Insert the end of a paper clip into the optical drive release
access in the front bezel of the optical drive.
2. Press in gently until the media tray is released, and then pull
out the tray.
3. Remove the disc from the tray by gently pressing down on the
spindle while lifting the outer edges of the disc. Hold the disc
by the edges and avoid touching the flat surfaces.
✎If the tray is not fully accessible, tilt the disc carefully as you
remove it.
4. Close the media tray and place the disc in a protective case.
Quick Reference B–1
B
Specifications
Operating environment
The operating environment information in the following table
may be helpful if you plan to use or transport the computer in
extreme environments.
Factor Metric U.S.
Temperature
Operating 5°C to 35°C 41°F to 95°F
Nonoperating -20°C to 60°C -4°F to 140°F
Relative humidity (noncondensing)
Operating 10% to 90% 10% to 90%
Nonoperating 5% to 95% 5% to 95%
Maximum altitude (unpressurized)
Operating -15 m to 3,048 m -50 ft to 10,000 ft
Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft
B–2 Quick Reference
Specifications
Rated input power
The power information in this section may be helpful if you plan
to travel internationally with your computer.
The computer operates on DC power, which can be supplied by
an AC or a DC power source. Although the computer can be
powered from a standalone DC power source, it should be
powered only with an AC adapter or a DC power source supplied
and approved by HP for use with the computer.
The computer is capable of accepting DC power within the
following specifications:
This product is designed for IT power systems in Norway with
phase-to-phase voltage not exceeding 240 V rms.
Input Power Rating
Operating voltage 18.5 V dc - 19.0 V dc
Operating current 3.5 A or 4.74 A
Specifications
Quick Reference B–3
Expansion port 3 input/output signals
(select models only)
The signal information in this section may be helpful if you
plan to use an optional docking device or expansion product that
connects to the expansion port 3 on the computer. (The computer
has only one expansion port. The term expansion port 3 describes
the type of expansion port.)
The following table identifies the input and output signals
supported by the expansion port 3 on the computer.
Feature Support
USB 2.0 Yes
10/100/1000 Ethernet Yes
IEEE 1394 (4-pin port) No
Consumer infrared lens (for optional
remote control only)
Ye s
Power inputs 65-W to 90-W maximum
Composite TV Yes
S-Video TV Yes
Component TV Yes
S/PDIF audio (select models only) Yes
DVI No
Headphone/speaker audio-out Yes
Microphone audio-in Yes
VGA Yes
Power button Yes
Volume control (up/down) Yes
Mute/unmute status Yes
Quick Reference C–1
C
Routine Care
Cleaning the display
To remove smudges and lint, frequently clean the display with a
soft, damp, lint-free cloth. If the screen requires additional
cleaning, use premoistened antistatic wipes or an antistatic screen
cleaner.
ÄCAUTION: To prevent permanent damage to the computer, never
spray water, cleaning fluids, or chemicals on the display.
Cleaning the TouchPad and keyboard
Dirt and grease on the TouchPad can cause the pointer to jump
around on the screen. To avoid this, clean the TouchPad with a
damp cloth, and wash your hands frequently when using the
computer.
ÅWARNING: To reduce the risk of electric shock or damage to internal
components, do not use a vacuum cleaner attachment to clean the
keyboard. A vacuum cleaner could deposit household debris on the
keyboard surface.
Clean the keyboard regularly to prevent keys from sticking and to
remove dust, lint, and particles that can become trapped beneath
the keys. A can of compressed air with a straw extension can be
used to blow air around and under the keys to loosen and remove
debris.
C–2 Quick Reference
Routine Care
Traveling and shipping
The computer is built to go with you for work and play. For best
results, follow the traveling and shipping tips described here.
■To prepare the computer for traveling and shipping, follow
these steps:
a. Back up your information.
b. Remove all optical discs and all external media cards,
such as digital cards and ExpressCards.
ÄTo reduce the risk of damage to the computer, damage to
a drive, or loss of information, remove the medium from a
drive before removing the drive from a drive bay, and
before shipping, storing, or traveling with a drive.
c. Turn off and then disconnect all external devices.
d. Shut down the computer.
■Take along a backup of your information. Keep the backup
separate from the computer.
■When traveling by air, carry the computer as hand luggage,
and do not check it in with the rest of your bags.
ÄAvoid exposing a drive to magnetic fields. Security devices
with magnetic fields include airport walk-through devices
and security wands. The airport security devices that check
carry-on luggage, such as conveyor belts, use x-rays instead
of magnetism and will not damage a drive.
■If you plan to use the computer during a flight, check with the
airline in advance. In-flight computer use is at the discretion
of the airline.
■If the computer will be unused and disconnected from
external power for more than 2 weeks, remove the battery and
store it separately.
■If you are shipping the computer or a drive, place it in a
bubble-pack mailer or other suitable protective packaging and
label the package “FRAGILE.”
Routine Care
Quick Reference C–3
■If the computer has a wireless device or a cell phone device
installed, such as an 802.11b/g, a Global System for Mobile
Communications (GSM), or a General Packet Radio Service
(GPRS) device, the use of these devices may be restricted in
some environments. Such restrictions may apply onboard
aircraft, in hospitals, near explosives, in hazardous locations,
and so on. If you are uncertain of the policy that applies to the
use of a particular device, ask for authorization to use it
before you turn it on.
■If you are traveling internationally, follow these suggestions:
❏Check the computer-related customs regulations for each
country on your itinerary.
❏Consult with Customer Care about power cord and
adapter requirements for each location in which you plan
to use the computer. Voltage, frequency, and plug
configurations vary.
ÅTo reduce the risk of electric shock, fire, or damage to the
equipment, do not attempt to power the computer with a
voltage converter kit sold for appliances.
C–4 Quick Reference
Routine Care
Quick Reference Index–1
Index
A
AC adapter, troubleshooting
3–2
antivirus software 2–1, 3–3
B
backing up computer 4–2
C
cables and cords
modem 2–3
power 2–3, 3–1
CD
inserting A–1
removing, with power A–2
removing, without power
A–2
cleaning the display C–1
cleaning the keyboard C–1
cleaning the TouchPad C–1
computer
backing up 4–2
turning off correctly 2–8
using safely 2–3
computer viruses 2–1, 3–3
cord, power 2–3, 3–2
customer support
Customer Care 3–6
Help and Support Center
1–1, 3–1
user guides 1–1
D
Device Manager 1–2
devices, external
drivers 3–5
troubleshooting 3–5
display
cleaning C–1
switching image 3–3
documentation 1–1
drivers
obtaining 3–5
reinstalling 4–5
drives, optical A–1
DVD
inserting A–1
removing, with power A–2
removing, without power
A–2
E
electrical storm, precautions
and procedures 2–3
external devices
drivers 3–5
troubleshooting 3–5
Index–2 Quick Reference
Index
F
finding
Help and Support Center
1–1
user guides 1–1
firewalls 2–2
H
hardware
identifying 1–2
installing 2–7
Help and Support Center (Start
> Help and Support) 1–1,
3–1
Hibernation 3–3
I
IEC 60950 compliance 2–4
image, switching, among
display devices 3–3
Internet
choosing an ISP 2–5
choosing type of access
2–5
connecting to 2–4
K
keyboard, cleaning C–1
L
labels, service tag 3–6
M
model number, computer 1–1
modem
connecting 2–4
surge protection 2–3
virus protection 2–1
modem cable 2–3
monitor, external 3–3, 3–5
N
Norton Internet Security 2–1,
3–3
O
operating environment
specifications B–1
operating system, displaying
version number 3–7
optical disc, inserting A–1
optical drive A–1
overheating, computer 2–4,
3–4
P
power
surge protection 2–3
turning off computer 3–4
turning on computer 3–1
power cord
2-pin adapter 2–3
surge protection 2–3
power lights, on, off 3–1
printer 3–5
privacy, protecting 2–2
Product Id 3–7
product number, computer 3–6
protecting privacy 2–2
protecting system files 2–2
R
rated input power
specifications B–2
recovery discs, creating 2–1,
4–4
Index
Quick Reference Index–3
recovery partition, deleting
4–8
recovery, system 4–7
registration number, operating
system 3–7
regulatory information 2–3
restore points 4–3
S
Safety and Comfort Guide 2–3
serial number, computer 1–1,
3–6
service tag 3–6
shipping the computer C–2
shutting down computer 3–4
Sleep 3–3
software
identifying 1–2
installing 2–7
Norton Internet Security
2–2
updating 2–8, 4–9
specifications
operating environment B–1
rated input power B–2
specifications, computer 1–1
surge protection 2–3
switching image among
display devices 3–3
system files, protecting 2–2
system recovery 4–7
system restore points 4–3
T
technical support, user guides
1–1
temperature
safety considerations 2–4
troubleshooting 3–4
TouchPad, cleaning C–1
traveling with the computer
C–2
troubleshooting procedures
display problems 3–3
external device problems
3–5
Hibernation or Sleep
problems 3–3
overheating problems 3–4
software problems 3–3
virus problems 3–3
troubleshooting resources
user guides 1–1
See also troubleshooting
procedures
turning off computer 3–4
turning on computer 3–1
U
user guides (Start > Help and
Support > User Guides) 1–1
V
vents 3–4
viruses, computer 2–1, 3–3
W
Windows Device Manager
1–2
Index–4 Quick Reference
Index
431182-001
Setup Instructions Thank you for purchasing
an HP computer!
Go to Help and Support today!
Select Start > Help and Support to become familiar with all of the tools available to
help keep your computer running smoothly, from enhanced driver updates to online
diagnostics. Help and Support is your personal technician!
Help and Support also provides the following resources:
Product information and user guides
Learn more about using your computer. Select Start > Help and Support >
User Guides.
Security support for your computer
Learn how to protect your computer from threats and viruses.
HP Network Assistant
Learn about setting up wireless access. Visit the HP Network Assistant at
http://www.hp.com/go/techcenter/wireless (English only).
Diagnostic tools
Learn how to scan your computer and troubleshoot problems.
Quick setup
Quick tour
1 Unpack the box 2 Insert the battery 3 Connect to external power
The instructions will guide you through setting up and
registering your computer.
Be sure to pick your language carefully.
5 Follow the on-screen instructions
You are ready to use the computer to
Watch movies.
Play games.
Connect to the Internet.
Install additional software and hardware.
Create recovery discs.
Protect the computer from viruses.
For more information on these topics, refer to the Quick Reference guide.
•
•
•
•
•
•
6 Next steps
1
2
1
2
3
1
2
4 Turn on the computer 7 Rotate the display
WARNING: To reduce the risk of electric shock or damage to your equipment:
• Plug the power cord into an AC outlet that is easily accessible at all times.
• Disconnect power from the computer by unplugging the power cord from the AC outlet (not by
unplugging the power cord from the computer).
• If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not
disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety
feature.
For more safety and regulatory information, and for battery disposal information, refer to the Regulatory, Safety and
Environmental Notices located in the Help and Support Center. Select Start > Help and Support > User Guides.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services
are set forth in the express warranty statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
First Edition: January 2007
!
433757-001
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Top Left Right
* Select models only
Front
Internal microphones
Rotate button
Mobility Center
button
DVD button
Media button
Pointing stick
Touchpad
ExpressCard slot
Power connector
Digital Media Slot
Optical drive
Consumer infrared lens
Display release latch
Power button
Audio-out (headphone) jack
Wireless light
S/PDIF headphone jack
Optical drive release button
Camera*
Audio-in (microphone) jack
Digital Media Slot light
Pen tether
Expansion port 3
Pen holder
External monitor port
USB port
S-Video-out jack
RJ-45 (network) jack
Previous/rewind button
Next/fast forward button
Stop button
Vent
Play/pause button
© Copyright 2007 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: January 2007
Document Part Number: 431886-001
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Table of contents
1 Setup Utility access
2 Using the Setup Utility
Changing the language of the Setup Utility .......................................................................................... 2
Navigating and selecting in the Setup Utility ........................................................................................ 2
Displaying system information .............................................................................................................. 3
Restoring default settings in the Setup Utility ....................................................................................... 3
Using advanced Setup Utility features ................................................................................................. 4
Closing the Setup Utility ....................................................................................................................... 4
3 Setup Utility menus
Main menu ............................................................................................................................................ 5
Security menu ...................................................................................................................................... 5
System Configuration menu ................................................................................................................. 6
Diagnostics menu ................................................................................................................................. 6
Index ..................................................................................................................................................................... 7
ENWW iii
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
1 Setup Utility access
The Setup Utility is a ROM-based information and customization utility that can be used even when your
Microsoft® Windows® operating system is not working or will not load.
The utility reports information about the computer and provides settings for startup, security, and other
preferences.
1. Turn on or restart the computer in Windows.
2. Before Windows opens and while the “Press <F10> to enter setup” prompt is displayed in the lower-
left corner of the screen, press f10.
ENWW 1
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
2 Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the computer is not
in the Setup Utility, begin at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in Windows, and then press f10 while the
prompt, “Press <F10> to enter setup,” is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Press f5 or f6 (or use the arrow keys) to select a language, and then press enter to select a
language.
4. When a confirmation prompt with your preference selected is displayed, press enter to save your
preference.
5. To set your preferences and exit the Setup Utility, press f10 and then follow the instructions on the
screen.
Your preferences go into effect when the computer restarts in Windows.
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●To choose a menu or a menu item, use the arrow keys.
●To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use
either the arrow keys or f5 or f6.
●To select an item, press enter.
●To close a text box or return to the menu display, press esc.
●To display additional navigation and selection information while the Setup Utility is open, press
f1.
2 Chapter 2 Using the Setup Utility ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in Windows, and then press f10 while the
prompt, “Press <F10> to enter setup,” is displayed in the lower-left corner of the screen.
2. Access the system information by using the Main menu.
3. To close the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter. (The computer restarts in Windows.)
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the computer is not
in the Setup Utility, begin at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in Windows, and then press f10 while the
prompt, “Press <F10> to enter setup,” is displayed in the lower-left corner of the screen.
2. Select Exit > Load Setup Defaults, and then press f10.
3. When the Setup Confirmation is displayed, press enter to save your preferences.
4. To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on
the screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the
computer restarts.
NOTE Your password, security, and language settings are not changed when you restore the
factory default settings.
ENWW Displaying system information 3
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Using advanced Setup Utility features
This guide describes the Setup Utility features recommended for all users. For more information about
the Setup Utility features recommended for advanced users only, refer to the Help and Support Center,
which is accessible only when the computer is in Windows.
The Setup Utility features available for advanced users include a hard drive self-test, a Network Service
Boot, and settings for boot order preferences.
The “<F12> to boot from LAN” message that is displayed in the lower-left corner of the screen each time
the computer is started or restarted in Windows is the prompt for a Network Service Boot.
The “Press <ESC> to change boot order” message that is displayed in the lower-left corner of the screen
each time the computer is started or restarted in Windows is the prompt to change the boot order.
Closing the Setup Utility
You can close the Setup Utility with or without saving changes.
●To close the Setup Utility and save your changes from the current session, use either of the
following procedures:
●Press f10, and then follow the instructions on the screen.
– or –
●If the Setup Utility menus are not visible, press esc to return to the menu display. Then use
the arrow keys to select Exit > Exit Saving Changes, and then press enter.
When you use the f10 procedure, you are offered an option to return to the Setup Utility. When
you use the Exit Saving Changes procedure, the Setup Utility closes when you press enter.
●To close the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
After the Setup Utility closes, the computer restarts in Windows.
4 Chapter 2 Using the Setup Utility ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
3 Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE Some of the Setup Utility menu items listed in this chapter may not be supported by your
computer.
Main menu
Select To Do This
System information ●View and change the system time and date.
●View identification information about the computer.
●View specification information about the processor, memory size,
system BIOS, and keyboard controller version (select models only).
Security menu
Select To Do This
Administrator password Enter, change, or delete an administrator password.
Power-On Password Enter, change, or delete a power-on password.
ENWW Main menu 5
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
System Configuration menu
Select To Do This
Language Support Change the Setup Utility language.
Embedded WLAN Device Radio Enable/disable an embedded wireless LAN device.
Embedded Bluetooth Device (select models only) Enable/disable an embedded Bluetooth® device (select models only).
Enhanced SATA support (select models only) Enable/disable enhanced SATA mode.
Boot Options Set the following boot options:
●f10 and f12 Delay (sec.)―Set the delay for the f10 and f12 functions
of the Setup Utility in intervals of 5 seconds each (0. 5, 10, 15, 20).
●CD-ROM boot―Enable/disable boot from CD-ROM.
●Floppy boot―Enable/disable boot from Floppy.
●Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●Boot Order―Set the boot order for:
●USB Floppy
●ATAPI CD/DVD ROM Drive
●Hard drive
●USB Diskette on Key
●USB Hard drive
●Network adapter
Diagnostics menu
Select To Do This
Hard Disk Self Test Run a comprehensive self-test on the hard drive.
NOTE On models with two hard drives, this menu option is
called the Primary Hard Disk Self Test.
Secondary Hard Disk Self Test (select models
only)
Run a comprehensive self-test on a secondary hard drive.
6 Chapter 3 Setup Utility menus ENWW
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Index
A
advanced Setup Utility features 4
B
boot options 6
boot order 6
C
changing the Setup Utility
language 2
closing the Setup Utility 4
D
Diagnostics menu 6
displaying system information 3
drives, boot order 6
E
embedded Bluetooth device 6
embedded WLAN Device
Radio 6
enhanced SATA support 6
H
hard drive self test 6
L
language support 6
M
Main menu 5
N
navigating in the Setup Utility 2
P
passwords 5
R
restoring default settings 3
S
secondary hard drive self test 6
Security menu 5
selecting in the Setup Utility 2
Setup Utility
accessing 1
changing the language 2
closing 4
Diagnostics menu 6
displaying system
information 3
Main menu 5
navigating and selecting 2
restoring default settings 3
Security menu 5
System Configuration menu 6
using 2
using advanced features 4
System Configuration menu 6
system information 5
ENWW Index 7
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
