Brother 8VA652 Label Printer User Manual Short Term Confidential US
Brother Industries, Ltd. Label Printer Short Term Confidential US
Brother >
(Short-Term Confidential) User Manual_US
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2182435 |
| Application ID | gZXq36TMztiVjICH8VJXwQ== |
| Document Description | (Short-Term Confidential) User Manual_US |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 56.65kB (708086 bits) |
| Date Submitted | 2014-02-02 00:00:00 |
| Date Available | 2014-05-03 00:00:00 |
| Creation Date | 2014-01-14 16:15:55 |
| Producing Software | Acrobat Distiller 9.5.5 (Windows) |
| Document Lastmod | 2014-01-14 16:17:14 |
| Document Title | (Short-Term Confidential) User Manual_US |
| Document Creator | PScript5.dll Version 5.2.2 |
English User’s Guide Español LAE119001 Read this guide before you start using your P-touch labeler. Keep this guide in a handy place for future reference. ELECTRONIC LABELING SYSTEM PT-P750W Safety Precautions WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks, rupture, overheating, abnormal odors or smoke. • Always use the specified voltage and the included AC adapter (AD-E001) for the P-touch labeler to prevent any damage or failure. • Do not touch the P-touch labeler during a lightning storm. • Do not use the P-touch labeler/AC adapter in places of high humidity such as bathrooms. • Do not overload the power cord. • Do not place heavy objects on, or damage the P-touch labeler, power cord or plug. Do not forcibly bend or pull the power cord. Always hold the AC adapter when disconnecting from the power outlet. • Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose. • Do not allow the P-touch labeler/AC adapter/power plug/batteries to get wet, for example, by handling them with wet hands or spilling beverages on to them. • Do not disassemble or modify the P-touch labeler/AC adapter/batteries. • Do not allow a metal object to contact both the plus and minus ends of a battery. • Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries. • Do not throw the batteries into fire or expose to heat. • Disconnect the AC adapter, remove batteries immediately and stop using the P-touch labeler if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it. • Do not use a damaged or leaking battery as the fluid may get on your hands. • Do not use a deformed or leaking battery or one whose label is damaged. There is a possibility of damaging the P-touch labeler. • Since loss of eyesight may result if leaked fluid from batteries gets into your eyes, immediately rinse your eyes with a large amount of clean water, and then seek medical attention. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries. Follow these guidelines to avoid personal injury, liquid leakage, burns or heat. • When the P-touch labeler is not being used, store it out of the reach of children. In addition, do not allow children to put any P-touch labeler parts or labels in their mouths. If any object has been swallowed, seek medical attention. • Do not touch metal parts around the print head immediately after printing. • Do not touch the cutter blade. (See Unpacking the PT-P750W & Parts Description.) • If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with clean water. • Remove the batteries and disconnect the AC adapter if you do not intend to use the P-touch labeler. • Do not use any batteries other than those specified. Do not use combinations of old and new batteries or combinations of different types, different charging levels, different manufacturers or different models. Do not insert a battery with its plus and minus ends reversed. • Do not drop or hit the P-touch labeler/AC adapter. • Do not put your finger inside the P-touch labeler when you close the cassette cover. • Before using Ni-MH rechargeable batteries, carefully read the instructions for the batteries and battery charger, and be sure to use them correctly. • When using Ni-MH rechargeable batteries, charge the batteries with a specialized battery charger before using the batteries. • Do not put your finger inside the tape exit slot. You could be injured by the cutter blade. General Precautions • Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the color of the label may change or be transferred to other objects. Before applying the label, check the environmental conditions and the material. • Do not use the P-touch labeler in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to the P-touch labeler. • Use only Brother TZe tapes with the P-touch labeler. Do not use tapes that do not have the mark. • Only use a soft, dry cloth to clean the P-touch labeler; never use alcohol or other organic solvents. • Use a soft wipe to clean the print head; never touch the print head with your fingers. • Do not put any foreign objects into the tape exit slot, the AC adapter connector or battery compartment, etc. • Do not place the P-touch labeler/batteries/AC adapter in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (e.g., on the dashboard or in the back of your car), high humidity, or in dusty locations. • Do not try to print if the cassette is empty; it will damage the print head. • Do not pull the tape while printing or feeding; it will damage the tape and the P-touch labeler. • Any data stored in memory will be lost due to failure or repair of the P-touch labeler, or if the batteries expire. • The P-touch labeler is not equipped with a charging feature for rechargeable batteries. • The length of the printed label may differ from the displayed label length on the computer. English • A protective clear plastic sticker is placed over the top panel during manufacturing and shipping. This sticker should be removed prior to use. • When printing multiple copies of a label or using the numbering function printing, the P-touch labeler will not detect the end of the tape cassette and will continue operating. • When using Heat Shrink Tube, the printing area will be smaller than when using normal tape. • If you connect a mobile device to the P-touch labeler using the NFC function without installing a specialized application, the Apps section of Google Play may be displayed on your mobile device automatically. You may be charged a communication fee for this service. Open Source Licensing Remarks This product includes open-source software. To see the open source licensing remarks, please go to the manual download selection on your model's home page of Brother Solutions Center at http://solutions.brother.com/. Federal Communications Commission (FCC) Declaration of Conformity (For USA Only) Responsible Party: Brother Mobile Solutions, Inc. 100 Technology Drive Suite 250A Broomfield, CO 80021 U.S.A. Tel: (303) 460-1600 Product Name : Brother P-touch Electronic Labeling System Model Number : PT-P750W This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. PT-P750W is equipped with FCC ID:B3Q8VA652. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Important • The enclosed interface cable should be used in order to ensure compliance with the limits for a Class B digital device. • Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment. * In case WLAN Interface is in use. CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorize antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. PT-P750W has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. Trademarks and Copyrights BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd. P-TOUCH is a trademark or registered trademark of Brother Industries, Ltd. © 2014 Brother Industries, Ltd. All rights reserved. Microsoft, Windows Vista, Windows Server and Windows are either registered trademarks or trademarks of Microsoft Corp. in the United States and/or other countries. Apple, Macintosh, Mac OS, iPhone, iPad and iPod are trademarks of Apple Inc., registered in the United States and other countries. The names of other software or products used in this document are trademarks or registered trademarks of the respective companies that developed them. Wi-Fi and Wi-Fi Alliance are registered trademarks of the Wi-Fi Alliance. Each company whose software title is mentioned in this manual has a Software LicenseLicence Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies. User’s Guide Español Printed in China LAE119001 International ENERGY STAR Compliance Statement Read this guide before you start using your P-touch labeler. Keep this guide in a handy place for future reference. ELECTRONIC LABELING SYSTEM PT-P750W Rechargeable Li-ion Battery Characteristics The purpose of the International ENERGY STAR® Program is to promote the development and popularization of energy-efficient office equipment. As an ENERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Understanding the properties of the rechargeable Li-ion battery will allow you to optimize its usage. • Using or storing the rechargeable Li-ion battery in a location exposed to high or low temperatures may accelerate its deterioration. In particular, using a rechargeable Li-ion battery with a high charge (charged 90% or more) in a location exposed to high temperatures will considerably accelerate battery deterioration. • Using the P-touch labeler while the rechargeable Li-ion battery is installed and charging may accelerate the battery’s deterioration. If using the P-touch labeler when the rechargeable Li-ion battery is installed, disconnect the AC adapter. • If the P-touch labeler will not be used for longer than one month, remove the rechargeable Li-ion battery from the P-touch labeler, and then store the battery in a cool place away from direct sunlight. • If the rechargeable Li-ion battery will not be used for a long period of time, we recommend charging it every 6 months. • If you touch a part of the device while a Li-ion battery is charging, the device may feel warm. This is normal, and the device may be used safely. If the P-touch labeler becomes extremely hot, discontinue use. Rechargeable Li-ion Battery (Li-ion battery optional with the PT-P750W) DANGER CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • If the P-touch labeler is used when both the rechargeable Li-ion battery is installed and the AC adapter is connected, the battery indicator may turn off and charging may stop even if the rechargeable Li-ion battery has not been fully charged. ® Indicates an imminently hazardous situation which, if the product is handled without following the warnings and instructions, will result in death or serious injuries. Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter referred to as "rechargeable battery"), If these precautions are not followed, overheating, leaking, or cracks in the battery may result in an electrical short, explosion, smoke, fire, electric shock, injury to yourself or others, or damage to the product or other property. Rechargeable Li-ion Battery Tips on Using the Rechargeable Li-ion Battery Stopping the Rechargeable Li-ion Battery Charging • Charge the rechargeable Li-ion battery before use. Do not use it before it is charged. • The rechargeable Li-ion battery charging can take place in 41°F-95°F (5°C-35°C) environments. Charge the rechargeable Li-ion battery in an environment in this temperature range. If the surrounding temperature is out of this range, the rechargeable Li-ion battery will not be charged, and the battery indicator will remain lit. To stop the rechargeable Li-ion battery from charging, disconnect the AC adapter cord. If you are connecting the P-touch labeler via a USB hub, it may not be detected correctly. 2. For Windows Vista® 104°F/40°C Standard discharge current 1.9 A 140°F/60°C Maximum discharge current 2.5 A 140°F/60°C Maximum charging voltage 8.2 Vdc Maximum charging current 1330 mA • Charging current: 800 mA • Charging voltage: up to 8.2 V (Maximum) Installing the Rechargeable Li-ion Battery BA-E001 To remove the rechargeable Li-ion battery, reverse the installation procedure. Charging the Rechargeable Li-ion Battery The rechargeable Li-ion battery can be charged while it is installed in the P-touch labeler. Perform the following procedure to charge the rechargeable Li-ion battery. Charging NOTE Up to 6 hours is needed to fully charge the rechargeable Li-ion battery. ATTENTION: (For USA and Canada) The Lithium Ion battery you have purchased is recyclable. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY Wireless Setup, Downloading P-touch Editor, and Printer Driver www.brother.com/inst/ The Status lamp on the P-touch labeler indicates the current operating condition. Wi-Fi For Windows® 8/ Windows® 8.1 Connecting the Power Supply On the [Start] screen, click [PT-P750W], [Open folder to view files], and then double-click [PTLITE10]. Green lamp is flashing Not lit Green lamp is lit Using the AC adapter NFC AD-E001 Green lamp is litĺGoes off briefly Green lamp is flashing • Starter tape cassette Green lamp is lit Using the batteries LR6 or HR6 Top panel Editor Lite lamp Editor Lite button Wireless mode button Tape exit slot Wi-Fi lamp NFC lamp 10 11 12 13 14 NOTE • If you do not see the dialog box, it may be hidden behind an open software program window. Minimize all windows to show the dialog box. • For details on using P-touch Editor Lite, visit the Brother Solutions Center. 16 Feed & Cut button Status lamp Battery lamp Power button Battery cover Mini-USB port AC adapter connector 15 16 17 18 19 20 Cassette cover NFC tag Release lever Print head Tape cutter Cutter blade Setting the Tape Cassette To remove the batteries, reverse the installation procedure. • Remove the batteries if you do not intend to use the P-touch labeling system for an extended period of time. • Dispose of the battery at an appropriate collection point, not in the general waste stream. In addition, be sure to observe all applicable federal, state, and local regulations. • When storing or discarding the battery, wrap it (for example with cellophane tape), to prevent it from short-circuiting. (Battery insulation example) 1. Cellophane tape 2. Alkaline or Ni-MH battery Turning the P-touch labeler On or Off 1. b To disconnect the P-touch labeler, click the icon in the computer’s task bar ( , or Red lamp is lit ). c Click [Safely remove USB Mass Storage Device]. d When the message indicating that the device can be safely removed is Red lamp is flashing displayed, turn off the P-touch labeler and disconnect the USB cable. For Macintosh a Exit P-touch Editor Lite by clicking on the red button in the top left corner of the window, if using the P-touch Editor Lite. Not lit • Select [Eject] from the Context menu. • Drag and drop it in the Trash. Brother iPrint&Label Brother iPrint&Label allows you to use features of your Brother machine directly from your mobile device, without using a computer. Simply search for "Brother iPrint&Label" in the App Store or Google Play. Turn on the P-touch labeler (1), then press and hold down the Editor Lite button until the green Editor Lite lamp lights up (2). Connect the USB cable to the computer and PT-P750W. NOTE Not connected wirelessly. The Wireless Direct mode is disabled (connections cannot be made). The Wireless Direct mode is enabled (connections can be made). An NFC-compatible device was placed near the P-touch labeler (NFC tag data was sent). The Wireless Direct settings are being configured (the user is connecting a device). Power is ON. Receiving data from the computer. Transferring data. The cassette cover is open. Close the cassette cover correctly. Starting the reset procedure, or the Feed & Cut button was pressed during the reset procedure. For details on resetting the P-touch labeler, see "How to Reset the P-touch Labeler". Cooling (Wait for the temperature to cool down) Reset in progress. For details on resetting the P-touch labeler, see "How to Reset the P-touch Labeler". The P-touch labeler is booting. Orange lamp is lit Indicates one of the following errors. Red lamp flashes for 0.9 second intervals: • No tape cassette • Incorrect tape cassette installed • Incompatible tape cassette installed • The cassette cover was opened during printing • Transmission error • Overheating error • Cutter error Red lamp flashes for 0.3 second intervals: • System error Charging is complete. The battery is fully charged. Charging. Battery Orange lamp is flashing Orange lamp flashes slowly: The remaining battery level is half or low (the lamp flashes faster as the remaining battery level decreases). Orange lamp flashes for 0.5 second intervals: Charge the battery. With the P-touch labeler off, press and hold the Feed & Cut button while holding down the Power button. When the Editor Lite lamp starts flashing and the Status lamp lights orange, press the Feed & Cut button six times while continuing to hold down the Power button. The P-touch labeler will be reset to the factory settings. Accessories Tape cassette Brother TZe tape (width) 0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm), 0.70" (18 mm), 0.94" (24 mm) AC Adapter AD-E001 Rechargeable Li-ion Battery BA-E001 Please see the Brother Solutions Center (support.brother.com/) for the latest OS compatibility information. • Make sure that there is no slack in the tape. • When setting or removing the tape cassette, make sure that the tape does not catch on the protrusion (1) or the print head. Connected wirelessly. How to Reset the P-touch Labeler Accessories Creating a Label using P-touch Editor Lite Condition turn off the P-touch labeler and disconnect the USB cable. When turning the P-touch off, keep the AC adapter connected or the batteries installed until the Status lamp goes off. If you cannot close the cassette cover, check to ensure the white lever is in the up position. If not, lift the lever, and then attach the cover. in the top right corner of the window c When a message indicating that the device can be safely removed is displayed, NOTE STATUS a Exit P-touch Editor Lite by clicking on the b Select [PT-P750W] on the desktop, and then perform one of the following: On: Press the Power button. Off: Press and hold the Power button until the Status lamp is lit in orange. Orange lamp is flashing For Windows® if using P-touch Editor Lite. CAUTION CAUTION Orange lamp is lit How to Disconnect the P-touch Labeler 19 18 Green lamp is flashing 20 17 Full charge AD-E001 Green lamp is lit • USB cable 15 -4°F - 68°F/-20°C - 20°C P-touch labeler Double-click [PT-P750W] on the desktop and the [P-touch Editor Lite] application icon. 13 14 Less than 1 year Charging Parameters For Mac OS X v10.7.5/10.8.x./10.9.x 12 -4°F - 104°F/-20°C - 40°C Lamp Check that the package contains the following before using the P-touch labeler. If any item is missing or damaged, contact your Brother reseller. Less than 3 month Features of P-touch Editor: Makes it easy for anyone to create a wide variety of custom labels in complex layouts by using fonts, templates, and clip art. The contents of this website are subject to change without notice. Unpacking the PT-P750W and Parts Description 10 11 -4°F - 122°F/-20°C - 50°C Definition of the LED Lamp Please visit our Support website. You can find following information: • Software download • Manuals/Documents • Frequently Asked Questions (Troubleshooting, Useful tips on using printer) • Consumable information and the latest OS compatibility information. You can also see setup steps on the website. Click the Getting ready to use your printer. link in the "information" section. Less than 1 month More advanced editing functions are available by downloading the printer driver and P-touch Editor from our support site, and installing them. For Windows® 7 • AC adapter (AD-E001) Charge Shipped battery After the USB cable is connected, a dialog box appears on the computer display. (The following screens may differ depending on the operating system on your computer.) support.brother.com/g/d/d5p2/ • PT-P750W Surroundings temperature range NOTE Click [Open folder to view files], and then double-click [PTLITE10]. • Charging time: Approximately 6 hours when charged by a AC adapter (AD-E001). • Nominal Voltage: DC 7.2 V • Nominal Capacity: 1850 mAh • Use the rechargeable battery only for its intended purpose. The P-touch labeler and rechargeable battery are designed to function exclusively with each other. Do not insert a different rechargeable battery into the P-touch labeler or insert the rechargeable battery into a different P-touch labeler, otherwise fire or damage may result. • To charge the rechargeable battery, insert the rechargeable battery into the P-touch labeler, and then use the AC adapter designed specifically for this P-touch labeler. • DO NOT charge the rechargeable battery near a fire or in direct sunlight. This could activate the protection circuitry, which is designed to prevent danger from high heat. Activation of the protection circuitry could cause charging to stop, charging to occur with excessive current or voltage if the protection circuitry fails, or an abnormal chemical reaction within the battery. • When charging the rechargeable battery, use only a battery charger designed specifically for the rechargeable battery. • DO NOT allow wires or other metal objects to come into contact with the terminals of the rechargeable battery. Do not carry or store the rechargeable battery with metal objects such as necklaces or hairpins. This could cause an electrical short, and cause metal objects to overheat. • DO NOT use or leave the rechargeable battery near fire, heaters, or other high temperature (above 176°F/80°C) locations. • DO NOT allow the rechargeable battery to come into contact with or to be immersed in water. • DO NOT use the rechargeable battery in corrosive environments, such as areas where salty air, salt water, acids, alkalis, corrosive gases, chemicals, or any corrosive liquid are present. • DO NOT use the rechargeable battery if it is damaged or leaking. • DO NOT directly solder any connections to the rechargeable battery. This could cause internal insulation to melt, gas to be emitted, or safety mechanisms to fail. • DO NOT use the rechargeable battery with the polarity (+) (-) reversed. Check the orientation of the rechargeable battery before inserting it, and do not try to force the rechargeable battery into the P-touch labeler. Charging the rechargeable battery with the polarity reversed could cause an abnormal chemical reaction within the rechargeable battery or abnormal current flow during discharge. • DO NOT directly connect the rechargeable battery to a household electrical supply. • Liquid (electrolyte) leaking from the P-touch labeler or rechargeable battery may indicate that the rechargeable battery is damaged. If the rechargeable battery leaks, immediately stop using the P-touch labeler, unplug the AC adapter, and isolate the P-touch labeler by putting it in a bag. Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes. Immediately rinse liberally with tap water or other clean water and seek the advice of a medical professional. If left alone, the electrolyte could cause eye damage. If electrolyte contacts your skin or clothing, immediately rinse them with water. • DO NOT put the rechargeable battery, or a P-touch labeler with the rechargeable battery installed, into a microwave oven or a high pressure container. • DO NOT leave the rechargeable battery without power in the main unit for a long period of time. This could shorten the life of the rechargeable battery or lead to an electrical short. • If the P-touch labeler can only be used for a short period of time, even though the rechargeable battery is fully charged, the rechargeable battery may have reached the end of its service life. Replace the rechargeable battery with a new one. When removing and replacing the rechargeable battery, cover the terminals of the old rechargeable battery with tape to avoid creating a short in the battery. • DO NOT disassemble, modify, or attempt to repair the rechargeable battery. • DO NOT dispose of the rechargeable battery in fire or cause it to overheat. This could cause the internal insulation to melt, gas to be emitted, or safety mechanisms to fail. Additionally, the electrolyte solution could catch fire. • DO NOT puncture the rechargeable battery with any objects, subject it to severe shocks or throw it. Damage to the rechargeable battery's protection circuit could cause the rechargeable battery to be recharged at an abnormal current/voltage or cause an abnormal chemical reaction within the rechargeable battery. • DO NOT incinerate the rechargeable battery or dispose of it with household waste. Click [P-touch Editor Lite]. Brother Support website Rechargeable Li-ion Battery Specifications Important Information Should you have questions, or need information about your Brother product, we have a variety of support options for you to choose from: USA-Customer Service Telephone: 1-877-BROTHER (1-877-276-8437) Fax: 1-901-379-1210 Website: www.brother-usa.com Supplies/Accessories: www.brothermall.com or 1-877-552-6255
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2014:01:14 16:15:55+09:00 Modify Date : 2014:01:14 16:17:14+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Creator : Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2014:01:14 16:17:14+09:00 Producer : Acrobat Distiller 9.5.5 (Windows) Document ID : uuid:11e12697-6410-40c1-8431-999a77eb7a3a Instance ID : uuid:891a5801-045c-4fa4-9fec-006c74f3991f Page Layout : SinglePage Page Count : 1EXIF Metadata provided by EXIF.tools