C H Systems RF-MDWS Door/window Sensors used by Security System User Manual IV

Cinch Systems, Inc Door/window Sensors used by Security System IV

User Manual IV

RF-MDWSX-Water Micro Wireless Sensor Installaon Instrucon Micro Wireless Water Sensor and Accessories 1 - RF-MDWS-Water Sensor 1- Mounng Tape 1 - Water Detector 2 - Baeries ( 2- 3VDC CR 2032) Instrucons Tamper switch Doc # I-RF-MDWSX-Water Rev. A Features:  Water detecon when liquid rises above contacts  Contacts above oor level to prevent false oor condensa-on detecon  Checks for water every 5 minutes, requires two posive checks for a valid alarm Programming: 1. Enter system programming and select Auto Learn Sensors 2. Remover cover from sensor to trip tamper 3. Qolsys panel displays Auto Learn Sensor 4. Press OK 5. Set senor type to Water 6. Select a sensor name 7. Press Add New 8. Exit program or trip next sensor to program Cover Latch Note: Baery Safety Observe polarity when inserng re-placement baeries to avoid damag-ing the sensor. Risk of re, burns and explosion. Do not recharge, disassemble, burn or expose baeries to temperatures above 100C (212F) Dispose of used baeries properly and in accordance with all local laws Keep baeries away from children Baeries Water Detector RF-MDWSX-Water Micro Wireless Sensor Installaon Instrucon Micro Wireless Water Sensor and Accessories 1 - RF-MDWS-Water Sensor 1- Mounng Tape 1 - Water Detector 2 - Baeries ( 2- 3VDC CR 2032) Instrucons Tamper switch Doc # I-RF-MDWSX-Water Rev. A Features:  Water detecon when liquid rises above contacts  Contacts above oor level to prevent false oor condensa-on detecon  Checks for water every 5 minutes, requires two posive checks for a valid alarm Programming: 1. Enter system programming and select Auto Learn Sensors 2. Remover cover from sensor to trip tamper 3. Qolsys panel displays Auto Learn Sensor 4. Press OK 5. Set senor type to Water 6. Select a sensor name 7. Press Add New 8. Exit program or trip next sensor to program Cover Latch Note: Baery Safety Observe polarity when inserng re-placement baeries to avoid damag-ing the sensor. Risk of re, burns and explosion. Do not recharge, disassemble, burn or expose baeries to temperatures above 100C (212F) Dispose of used baeries properly and in accordance with all local laws Keep baeries away from children Baeries Water Detector
FCC label statement: “This device complies with part 15 of the FCC Rules. Opera-on is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.” “Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interfer-ence to radio communicaons. However, there is no guaran-tee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separaon between the equipment and receiver. —Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.” “Changes or modicaons not expressly approved by the party responsible for compliance could void the user's author-ity to operate the equipment” “RF Exposure Guidance: This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled envi-ronment. This equipment should be installed and operated with a minimum distance of 1.5cm between the radiator and persons. This transmier must not be co-located or operang in conjuncon with any other antenna or transmier, except in accordance with FCC mul-transmier product proce-dures.” Installaon Doc # I-RF-MDWSX-Water Rev. A Specicaons: Features: Detector:  Dual water sensor probes  Above oor detecon  72” cable length Sensor:  Cover tamper  Unique ID for each funcon  Temperature check every 5 minutes  Baery checked every hour Baeries: (2) - Panasonic CR2032 Energizer CR2032 Duracell DL2032 When mounng the wireless device make sure it is not mounted on metal or there are any large metal objects between the device and the control panel, this can be tested prior to or aer installaon Water Detector Mounng: Mount the sensor as high as possible, the water de-tector has a 72” cable aaching it to the sensor The water detector can be mounted to the wall or oor using mounng screws Mount sensor using supplied hardware Detector mounts directly to the oor or can be aached to a wall FCC label statement: “This device complies with part 15 of the FCC Rules. Opera-on is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.” “Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interfer-ence to radio communicaons. However, there is no guaran-tee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separaon between the equipment and receiver. —Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.” “Changes or modicaons not expressly approved by the party responsible for compliance could void the user's author-ity to operate the equipment” “RF Exposure Guidance: This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled envi-ronment. This equipment should be installed and operated with a minimum distance of 1.5cm between the radiator and persons. This transmier must not be co-located or operang in conjuncon with any other antenna or transmier, except in accordance with FCC mul-transmier product proce-dures.” Installaon Doc # I-RF-MDWSX-Water Rev. A Specicaons: Features: Detector:  Dual water sensor probes  Above oor detecon  72” cable length Sensor:  Cover tamper  Unique ID for each funcon  Temperature check every 5 minutes  Baery checked every hour Baeries: (2) - Panasonic CR2032 Energizer CR2032 Duracell DL2032 When mounng the wireless device make sure it is not mounted on metal or there are any large metal objects between the device and the control panel, this can be tested prior to or aer installaon Water Detector Mounng: Mount the sensor as high as possible, the water de-tector has a 72” cable aaching it to the sensor The water detector can be mounted to the wall or oor using mounng screws Mount sensor using supplied hardware Detector mounts directly to the oor or can be aached to a wall

Navigation menu