CARMATE MFG CMDC3000 DRIVE ACTION RECORDER User Manual H1 H4

CARMATE MFG.CO.,LTD DRIVE ACTION RECORDER H1 H4

05 User Manual

TEL.TEL. No.90-70047CTOPK2017.02月C版MacIllustratorCS6DC3000H1H4Warranty Documentd’Action 360 Instruction ManualThis Product has been made available for purchase after having undergone strict quality control and inspection. In the event of a product failure arising from normal use, please contact the dealer at the point of purchase (see overleaf), or the Car Mate Service Center for product repair/replacement.PurchasedProductPurchaseDate Within one year from the Purchase DateWarranty period for free repairsYear /Month/Day*Please retain proof of purchase indicating the Purchase Date alongside this Warranty Document.CustomeraddressCustomernameDealer name/addressVehicle model:Problem(s):Car Mate Mfg. Co., Ltd. Nagasaki 5-33-11, Toshima-ku, Tokyo, Japan 171-0051http://www.carmate.co.jp/Using this Product SafelyPreparationInstallationCapturing Images/VideoViewing/Deleting MediaChanging Camera SettingsTroubleshootingVisit our website for more details.For PC: http://www.carmate.co.jp/club/For mobile or smartphone: http://mobile.carmate.co.jp/CameraProduct number:DC3000Contact Car Mate service center for product information.TEL: +81-3-5926-1212 FAX: +81-3-5926-1218Register with us and answer our questionnaire to win prizes!Vehicle grade: Vehicle year:Productfailure informationd’Action 360 (DC3000)
21TOPKP2P12017.01月初版MacIllustratorCS6DC3000Introduction d’Action 360 featuresAbout this manualDisclaimerPlease note that Car Mate takes no responsibility for any loss arising from the use or failure of this Product, or from any damage to any recorded video and/or data. The latest version of the d’Action 360 Instruction Manual is available at:http://daction.carmate.jp/Thank you for purchasing d’Action 360. This instruction manual is your guide book to using d'Action 360 (hereinafter “Product”). To use this Product properly and safely, please read and understand the contents of this manual prior to use. After reading, please keep this manual nearby for future reference or troubleshooting. If you give this Product to somebody else, please include this manual as well.This Product is a smartphone-linked, car-mounted camera with a 360-degree panoramic view, allowing you to record any and all of the scenes encountered during your time on the road. Captured videos and still images can be downloaded straight to your smartphone on the spot, making playback and sharing possible both anytime, and anywhere.This Product also features three operational modes. By purchasing add-on products separately, you can utilize these modes for a wider range of purposes.In Driving mode, the camera installed in your car captures both the inside of the car and the outside simultaneously. In addition to acting as a standard dashboard camera, d’Action 360 is able to simultaneously record both the road around you, and scenes from inside the vehicle. The camera automatically begins operation in Driving mode when power is supplied via your car’s cigarette lighter receptacle.*Security Add-On (DC200) is required. (Sold separately)Battery Pack (DC1)(Sold separately)Security Add-On (DC200)(Sold separately)*Battery Kit Add-On (DC100) is required. (Sold separately)Action mode allows you to record your surroundings by taking the camera outside of your car. Just as if it were a handheld camcorder, enjoy shooting simple video and capturing stills using the camera’s recording capabilities. The camera automatically switches to Action mode upon attachment of the Battery Pack (DC1).In Security mode, d’Action 360 keeps your parked car under surveillance. From keyings to hit-and-runs, d’Action 360 can record all the accidental or intentional moments that take place around your car. When the car engine is turned off with the Security Add-On (DC200) connected, the camera automatically switches to this mode.Driving modeAction modeSecurity mode Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings Troubleshooting
3 4……………………………… 1…………… 2…… 5………………………… 11………………………… 13………………………… 14………………………… 19……………………………… 22…………………… 25……………………… 28……… 29…………………………… 31……………… 36……………………………… 38…………………………… 42➡p.18p.29 ⬅p.31 ⬅p.14 ⬅➡p.29➡p.25➡p.32TOPKP4P32017.01月初版MacIllustratorCS6DC3000Useful features What kind of video can I record?I want to capture high-quality images and video.My camera responds too quickly to impacts...How many hours of footage can I record?I want to check my recordings on my smartphone!What type of memory card can I use?How do I update my d’Action 360 camera?*Checking the remaining storage space in the “Manual Recordings” folderChanging the camera settingsOthersTroubleshootingSpecificationsWarranty*Changing the recording resolution*Changing the impact detection sensitivity*Changing the SSID and password*Changing other settings*Approximate recording time and number of images*Formatting the memory card*Upgrading the camera body*LED indicators*Resetting the device*Checking the remaining battery*Pausing camera operationIntroductionFeatures of d’Action 360Using this Product safelyProduct contentsOptional add-onsPreparationInstallationCapturing images/videos*Inserting the memory card*Connecting to a smartphone*Checking the mounting position*Checking the view range*Capturing images/videos in Driving mode*Capturing images/videos in Action modeViewing/deleting media*Viewing/deleting media on a smartphone*Viewing/deleting media on a PC*Capturing images/videos in Security modeTable of ContentsUsing this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings Troubleshooting
5 6TOPKP6P52017.01月初版MacIllustratorCS6DC3000Cautionary symbolsIn order to use this Product safely and prevent any damage caused to you and surrounding people/property, please ensure to read this manual carefully before use.Graphic symbols are used in this manual to indicate cautionary matters, based on both the level of seriousness and the subject matter.Please ensure a thorough understanding of what each symbol represents before reading.If the Product is handled improperly, possibility of death or serious injury is anticipated. If the Product is handled improperly, possibility of injury or property damage is anticipated.Improper handling of the Product may be regarded as violation of the law.Useful tips to know when handling the Product.For your safety, please follow the below instructions:Installing the ProductUsing this Product safelyUsing this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingDo not use this Product if it is broken, not working, or shows any other signs suggesting an abnormality. To prevent possible accidents or fire from occurring, stop using the Product immediately if it you notice any smoke, abnormal noises, or abnormal smells, etc. This Product operates using the same frequency band (2.4GHz band) as the following instruments or radio stations:(1) Industrial, scientific, or medical devices/appliances such as microwave ovens.(2) Private, licensed radio stations to identify and track electronic tags, used for example, on factory production lines.(3) Specific low-power radio stations (stations permitted to operate without a license)Using this Product may cause radio-frequency interference (RFI) with the above-mentioned instruments and/or radio stations.1) Before use, ensure there are none of the above-mentioned instruments or radio stations in operation around the Product.2) Stop using the Product immediately if it has ever caused any radio-frequency interference to any private, licensed radio station as described above in (2).Do not use the Product if condensation (water droplets) has formed on the inside. Condensation is more likely to form when the Product is moved from a low temperature environment to a high temperature environment , and may cause the Product to malfunction or heat up.Do not drop or apply excessive force to the Product.To prevent product failure or the loss of data, do not place the Product near magnetic objects.To prevent electric shock or product failure, do not insert metallic objects such as pins or wires into the apertures of the Product.Do not operate the Product while you are driving. Doing so may lead to accidents, and certain laws prohibit the handling of any such devices while operating a vehicle.This Product is only for use in Japan. This Product has been created to comply specifically with Japanese Radio Laws. As such, the use of this Product may be illegal in some countries outside of Japan. To prevent electric shock, fire, or product failure, do not disassemble, attempt to repair, or alter this Product in any way.Do not remove the compliance certificate label pasted on the Product. Use of an unlabeled Product is prohibited by law.Do not mount the Product or distribute its cables around areas where operation of the vehicle’s airbags may be obstructed. In the event of car crash, the airbag may not work properly, or lead to an accident/injury upon inflating. Install the Product properly according to this manual. Keep the camera body attached to the mount while driving and during inspection. Car products mounted incorrectly may not only be regarded as a violation of your local traffic laws, but may also lead to road accidents.Radio-frequency interference may occur with other electrical devices such as the radio or vehicle GPS systems. If such interference has occurred, change the installation location.Keep the power cable and terminal portions clean, wiping away any dust or dirt that may have gathered. Dust and dirt can prevent secure electrical contact, which may lead to electric shock or fire.If you are not planning on using the Product for a long period of time, unplug the power cable from the camera body. Electric discharge from the vehicle battery or fire may occur.Additionally, fire or product failure may occur if the Product has been left in a closed space, in the hot sun, or in high temperatures for an extended period of time.This Product is not dustproof, rainproof, or waterproof. To prevent electric shock, fire or product failure, keep it away from water and other foreign matter, and do not handle with wet hands.Check the Product is securely installed before driving your car. A Product that has detached or fallen down may result in injury or accidents occurring.Do not suddenly accelerate or make any sharp turns for the sole purpose of checking the performance of the Product. Operating your vehicle in such a way may lead to injury or accidents.Do not use the Product where it is prohibited, such as in hospitals or on an aircraft. The Product may cause pacemakers and other electronic medical devices to malfunction.
7 8TOPKP8P72017.01月初版MacIllustratorCS6DC3000Use the USB power socket alone. Overloading or splitting the connection may lead to the abnormal generation of heat or fire.The total outlet amperage of the attached USB power socket is a maximum 3.0A (amps). If the USB power socket is used in combination with other products and the total outlet amperage exceeds 3.0A, no electric power will be supplied to the camera body. The maximum electrical power consumption of this Product is approximately 800mA (at DC12V).The actual position of your car is determined by microwave signals broadcast from GPS satellites. Without receiving such signals, the precise position of your car cannot be determined.Using this Product near a TV antenna may cause a deterioration in the reception sensitivity, flickering and/or noise from the TV set.Do not use the recorded images, videos and/or data for illegal purposes.In some cases, your recorded images, video and/or data may constitute an infringement on the legal rights of a third party. Car Mate takes no responsibility for any matters with regard to, and arising from, the content of the images, videos and/or data recorded on this Product.This Product is not guaranteed to produce validity as evidence for any accidents, or to identify the license plate, model or color of any vehicle.This Product is not guaranteed to record in any and all circumstances. Car Mate takes no responsibility for any loss arising from the use or failure of this Product, or from any damage to any recorded video and/or data.Blinking or discoloration may make it difficult to distinguish between recorded LED traffic lights.Recording performance and time may vary depending on the object being recorded, or on the ambient environment.Recording quality may deteriorate at night, when backlit, or when the ambient lighting changes sharply.Keep the camera lens surface and all car windows clean. Irregular light reflection and refraction caused by dust and other foreign matter may affect recording quality.To record in highest possible quality in darkness, ensure you turn on the headlights or fog lights of your car.In order to receive clear GPS signals, do not place obstructive items around the Product. When the Product is switched on, it may take time until it starts receiving GPS signals. Allow between 30 seconds to a few minutes, depending on the signal reception environment, weather, vehicle conditions, and position of the Product.GPS signal reception may be hindered if the front windshield of your car has been surface-treated with a coating, etc.Depending on the ambient environment or geographical factors, the Product may not be able to adequately receive GPS signals or receive GPS signals at all.GPS satellites are controlled by the U.S. Department of Defense and their accuracy is subject to change without prior notice.Do not use this Product near other GPS products or VICS receiver units. Doing so may cause such products/units and this Product to malfunction.Some cars (such as those imported from overseas) are designed to keep supplying electrical power to their cigarette lighter receptacle, even with the engine turned off. If your car falls into this category, unplug the Product when the engine is turned off.After the camera body is switched on, it may take up to approximately 30 seconds to begin recording.In some cars with a start-stop system, the supplied voltage may be reduced in order to restore the electric power for restarting the engine. Due to this, the power supply to this Product may be stopped.To prevent product failure, avoid exposing the camera lens to direct sunlight for long periods of time.If the surface of the lens has attracted dirt, sand, fingerprints, etc., wipe clean using a dry, clean and lint-free cloth.Due to the characteristics of the electrical components of this Product, the surface/internal temperatures of the camera may increase depending on the conditions of use. When the ambient temperature exceeds the operating temperature range, Product operation will be stopped for protection. If Product operation is stopped, resume operation once the camera temperature has decreased.Hold the connector portion of the power cable when unplugging. A damaged power cable may cause electric shock or fire.To prevent possible product failure, use this Product only on cars built with a DC12V negative earth electrical system.This Product automatically switches between its three operational modes by recognizing its electric power supply source. Ensure you use only the add-on accessory products included in this Product, or those sold separately. Some third-party USB cables and USB power sockets may not be compatible with this Product.To prevent possible deformation or fire from occurring, do not leave the camera body in areas where temperatures can rise quickly, such as on the dashboard.If the camera body has become hot after using it for long amount of time, to avoid potential burns, do not allow it to come into direct contact with your skin.To prevent product failure, do not touch the terminals on the camera body.When cleaning the camera body, do not use solutions containing abrasive compounds, alcohols, or organic solvents.Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingPowering the Product The GPS systemThe camera bodyRecording images, video and data
109るす更変TOPKP10P92017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingThe memory card CopyrightSecurity modeIf the memory card has become hot after using it for long amount of time, to avoid potential burns, do not allow it to come into direct contact with your skin.Initialize (format) your memory card when:*Using a brand-new card for the first time.*Using a memory card that has been formatted on another camera or computer.*It appears that reading and writing speeds have slowed down.*You wish to delete all the data on the memory card.According to copyright law, you cannot use recorded images, videos and/or data without permission of their right holder for any purposes other than your own personal use. If you plan to use this Product at live demonstrations, shows or exhibitions, follow the rules of the organizers.Memory cards are expendable supplies. After using it a certain number of times, normal recording may be impeded due to breakage in part of its memory sector.Ensure to back up important data on other devices. Data stored on a memory card may be overwritten or deleted.Before purchasing a brand-new memory card for this Product, check the specifications on page 14.Using an incompatible memory card may lead to loss of data or failed recording.Store your memory cards in a dry, cool place.To prevent product failure, do not touch the memory card with oily or wet hands.To prevent the possible corruption of data or damaging the memory card, do not remove the memory card during data backup, formatting, while resetting your PC system or during operation.To prevent possible memory card failure and loss of data, do not drop or apply excessive force to the memory card.To prevent possible breakage, failure and malfunction of the memory card, do not insert any foreign objects into the slots, and do not touch the terminal portion of the Product.Insert the memory card in the correct orientation until it clicks in place.To avoid damaging the memory card, do not insert it forcibly. To prevent possible product failure, do not switch off the camera, unplug the power cable nor detach the add-on battery pack (sold separately) while updating the camera body.Car Mate takes no responsibility for any damage or loss arising from the drainage of your car battery while using the Product in security mode.When using this Product in security mode, always use the Security Add-On (DC200). Never use other third-party cables to directly connect the Product to the power source, as doing so may lead to problems such as a flat car battery.
11 12●● ●● ●●●●　　● ●TOPKP12P11201702-C2017.02月C版MacIllustratorCS6DC3000Product contentsBefore use, check the Product for the following contents.Camera body x 1USB power socket x 1Cable clip x 3d’Action app for smartphone (iOS/Android)d’Action 360 (iOS) d’Action 360 (Android)d’Action software for PC (Windows)Please visit our website below for the most up-to-date list of supported devices/OS, and downloading procedures. http://daction.carmate.jp/Memory card x 1 Instruction manual (this book)Communication cable x 1<Front side>Record button/LEDCommunication button/LEDSlide rail portion (convex)microSDHC 16GB (UHS-I, Speed class 3)Cable length: approx. 0.3 meter2 ports, total 3.0ABuilt-in GPS antenna portionTerminalSwitch button/LEDMicrophone (left)Memory card slotSlide rail portion (concave bottom)Release levermicroUSB connectormicroUSB connectorUSB connectorUSB connectorCable length: approx. 4 metersCable hookKnob IKnob IISticky portion (adhesive tape attached)microUSB slotMicrophone (right) Memory LEDLensCover<Bottom side>Mount x 1 Power cable x 1Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings Troubleshooting
1413● ●12MEMOTOPKP14P132017.01月初版MacIllustratorCS6DC3000Optional add-onsUsing this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingVisit our website below for more details.http://daction.carmate.jp/PreparationBattery Kit Add-On (DC100) Security Add-On (DC200)Please purchase the following optional add-ons according to your needs. (Available as of January 2017)Battery packTerminal portionBattery chargerThis is a cable set that allows the camera to receive electric power from the battery in your car while it is parked, and keep it under surveillance.*To prevent possible damage to the memory card, do not remove the memory card during data backup, formatting, while resetting your PC system or during operation.*Ensure to back up important data on other devices. Some data on the memory card may be overwritten during use.*To prevent possible malfunction, do not store data that has been saved on a device other than this Product.*Always check the orientation of the memory card; inserting it in the wrong orientation may lead to breakage or malfunction.*Before removing the memory card, ensure the power is switched off. Removing it while the power is on may cause breakage of the card and/or corruption of data.*If the memory card has become hot after using it for long amount of time, to avoid potential burns, do not allow it to come into direct contact with your skin.*Using incompatible memory cards may cause loss of data and/or recording failure.*Some third-party memory cards may be recognized more slowly, or be difficult to insert/remove.*Depending on the memory card capacity, start-up of the Product may take longer.This is a portable battery unit with built-in lithium-ion batteries. By attaching this unit to the camera body, you can use the camera outside of your car.Ensure the power is switched off.Inserting the memory cardEnsure the power of the camera body is switched off, and that all the LEDs are off.Open the cover on the camera body. Firmly insert the memory card in the correct orientation until it clicks into place.When removing the memory card, push it in until you hear a click, and release to allow a portion of the memory card to emerge from the camera body. Slowly pull out the pushed-out portion to remove the memory card.Inserting the memory cardRemoving the memory cardBefore using a third-party memory card, please check the compatibility below.Card typeSpeed classCapacitymicroSDHC or microSDXCUHS-I - Speed class 3 or higher16GB – 128GB(As of January 2017)
15 1632415657d'Action 360 (iOS) d'Action 360 (Android)201702-CTOPKP16P152017.02月C版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingInstall the d’Action app on your smartphoneTurning on the engineTurning on Wireless LAN (Wi-Fi) on your smartphoneSelecting the SSID and entering the passwordOpening the app/confirming connectionAttaching the camera body to the mountConnecting the power cableTo play videos recorded by this Product on your smartphone, you must first download the d’Action app.Download it on App Store or Google Play. *The memory LED will also light up.<Display example><Display example><Initial values>*Create your own SSID and password later. (See page 29.)SSID: dAction360_xxxxxxxxPassword: 12345678Turn on your car engine (turn on the ignition) and ensure all LEDs light up after a few seconds.Turn on “Wi-Fi” under settings on your smartphone.By turning on “Wi-Fi” as in procedure 5, a list of connectable wireless devices will be displayed.Select the SSID that starts with “dAction360”, and enter the password.Open the d’Action 360 app, and check that a connection has been established.If you are unable to establish a connection, turn off your car engine (turn off the ignition), and start again from the procedure 4.Match the convex portion of the camera body with the concave portion of the slide rail portion on the mount. Slide them into each other until they click.Insert the microUSB connector on the power cable into the camera body, and the other USB connector into the USB power socket. Insert the USB power socket into your car’s cigarette lighter receptacle. *Ensure each connector is correctly oriented.While lifting the release lever on the mount, slide the camera body out.Connecting to a smartphoneDetaching the camera bodyPower cable Power cableCigarette lighter receptacle USB power socketSlide rail portion (concave)Slide rail portion (convex)
17 18194°360°MEMO20%TOPKP18P172017.01月初版MacIllustratorCS6DC3000Checking the mounting position Checking the field of visionWhen mounting the camera, ensure to meet all the below requirements.After checking the video using your smartphone, determine where the camera is mounted inside your car and how the power cable is arranged. In doing this, follow the instructions below.*Install the Product properly according to this manual. Car products mounted incorrectly may be regarded as a violation of your local traffic laws. Keep the camera body attached to the mount while driving and during inspection.While checking the video on your smartphone app, confirm an approximate position for the camera and approximate angle of the lens.*Do not start mounting yet.After determining an appropriate mounting position, remove the power cable from the camera body and detach the camera body from the mount.Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingRecommended mounting positionFront windshieldGPS antenna<Example of a mounted camera>*The mounted camera does not interfere with the driver’s vision and operation of the vehicle.*The mounted camera does not block the rearview mirror, or obstruct the vehicle’s airbags.*The camera is mounted within the upper 20% portion of the windshield. (See illustration above)*The camera is mounted so that its lens is within the wiping range of the windshield wipers.*The taped part of the camera does not overlap any heated wire printed on the windshield or antennae.*If additional security or safety cameras are already in place, the camera to be mounted should not be within the view of such camera.*No cable or metallic objects should be between the front windshield and the GPS antenna. (see illustration on the right)View angle of recorded videoThis Product is a whole-sky, 360-degree camera. Its recording range is hemispherical, with viewing angles 360° horizontally, and 194° vertically. (Figure 1)If the camera is mounted with the lens facing directly below, you can simultane-ously record video of inside and outside of your car. (Figure 2)Figure 1 Figure 2
19 2012347568　TOPKP20P192017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings Troubleshooting*The memory LED will also light up.Install the Product outdoors where GPS signals can be easily received.For a neater arrangement, keep the power cable running through the cable hook located on the upper portion of the mount. Ensure to have some extra length of the power cable available in advance.Wipe the mounting surface clean with mild detergent. Wipe again with a water-soaked cloth, and then again using a dry cloth.Peel the release paper off the mount. Orient the mount so the release lever faces to the right. Tape the mount firmly onto the front windshield.Match the convex portion of the camera body with the concave portion of the slide rail portion of the mount. Slide them together until they click.Arrange the power cable neatly using the cable clips included in the Product.*To stabilize the tape adhesion, leave the mount for at least 24 hours without the camera attached. Do not peel off and re-tape the mount, as doing so will lower the adhesiveness of the tape.*Do not drive your car until the camera body is attached to the mount. Release leverCigarette lighter receptacleCable hookCleaning the mounting area Open the cover to ensure the memory card is inserted. Insert the microUSB connector of the power cable into the USB power socket.Checking the memory card is inserted and connecting the power cableConnecting to a smartphoneTurn on your car engine (turn on the ignition) and ensure all LEDs light up after a few seconds.In order to set the date and time, the camera must receive GPS signals. Keep the engine running for at least 40 seconds.Turning on the engineAfter inserting the microUSB connector of the power cable into the USB power socket, insert the USB power socket into your car’s cigarette lighter receptacle.Inserting the power cable into the cigarette lighter receptacleAttaching the mountAttaching the camera body to the mountArranging the power cableInstallationAfter ensuring the communication LED is on, connect the camera and your smartphone wirelessly. Open the d’Action app.
22211321 minute10 seconds1 minuteMEMO910TOPKP22P212017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingWhile checking the app display on your connected smartphone, adjust the lens angle.Once you have determined your ideal lens angle, hold knob I firmly by hand so as not to let it turn, and turn knob II to fix the lens in place.Adjusting the lens angleAfter fixing the lens angle, turn off your car engine (turn off the ignition). This completes the camera installation.Turning off the engine*The memory LED will also light up.Knob IKnob IILens angle and recorded footageAdjust the lens angle depending on your preferred recording field of view. (See images below) When the lens faces the driving direction, the camera will record most of the road traffic ahead. Adjusting the lens angle to face inside the car will allow the camera to record the inside of the car, and the traffic behind it.Please set according to preference.<Lens facing the driving direction>Driving direction Back of the car interior<Lens facing directly below> <Lens facing the inside of the car>Capturing images/videos in Driving modeCapturing images/videosBy turning on your car engine (turning on the ignition), the camera is automatically switched on to begin continuous recording. Ensure all LEDs are on within a few seconds of starting the engine.*It may take up to 30 seconds for the camera to begin recording after being switched on.Turning on the engine to switch on the cameraIn Driving mode, the four types of recording modes can be used as follows.On the memory card, one folder will be created for each recording mode. Captured/recorded files are recorded in their respective folder together with geotagging (geographical identification metadata).●Capturing scenery●Capturing the inside of your car■Manual RecordingThe camera starts and stops recording either by pushing the record button on the camera body, or by switching it on using your smartphone. One file is saved every minute. When the folder becomes full, the camera stops recording automatically.■Impact RecordingWhen the camera detects an impact, it stores the footage from 10 seconds before and 10 seconds after (20 seconds total). When the folder becomes full, the most recently saved file overwrites the oldest file. *The manual recording mode supersedes the impact recoding; in the manual mode, the camera will not record any footage even if an impact is detected.■Still image captureThe camera takes one still image by switching it on using your smartphone. While the folder is full, you cannot take any more still images.*You cannot take any still images by pushing the button on the camera body.*You cannot take any still images while the camera is in manual recording mode.*You cannot take any 4K equivalent still images while the camera is in driving mode.■Continuous recordingThe camera records video continuously from the moment the car engine is turned on until it is turned off. One file is saved every minute. When the folder becomes full, the most recently saved file overwrites the oldest file.*The camera will not record continuously in manual recording mode.●Capturing any potential road incidents●Capturing still images●Recording continuous footageRecordingBy turning off your car engine (turning off the ignition), the camera is automatically switched off.Ensure all LEDs have turned off within a few seconds of stopping the engine.Turning off the engine to switch off the camera
23 241313　1 minute2 Normal mode Energy saving mode10 seconds(7 seconds) 30 seconds 30 seconds3 seconds42TOPKP24P232017.02月C版MacIllustratorCS6DC3000201702-CUsing this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingCapturing images/videos in Action mode *Battery Kit Add-On (DC100) is required. (Sold separately)Press and hold for more than two secondsDo not detach the battery pack during recording. Before detaching the battery pack, stop recording and switch the power off. Attach the fully charged battery pack (sold separately) to the camera body.Attaching the battery packTurning off your car engine (turning off the ignition) with the security add-on (sold separately) connected will automatically stop Driving mode and momentarily switch off the camera. From here, the camera will automatically switch on and change to Security mode.Ensure the switch button LED is blinking green intermittently.Turning off the engineIn Security mode, the following security recording modes can be used.Recorded files are stored in a folder on the memory card.*GPS geotagging is not recorded.About energy saving modeThis Product is equipped with an energy saving mode, allowing for longer operation of the Product without putting strain on your car’s battery. The camera will switch automatically to this energy saving mode when either Security mode has been running for sixteen hours, or the camera body has reached a high temperature. When the camera switches to energy saving mode, the switch button LED will turn off. In addition, if the ambient temperature exceeds the operating temperature range, camera operation will be stopped for protection.RecordingTurning on your car engine (turning on the ignition) with the security add-on connected will automatically stop Security mode and momentarily switch off the camera. From here, the camera will automatically switch on and change to Driving mode.Ensure all LEDs have turned on within a few seconds of starting the engine.Turning on the engineIn Action mode, two types of recording modes can be used as follows.On the memory card, one folder will be created for each recording mode; and captured/recorded files are recorded in their respective folder together with geotagging (geographical identification metadata).Press and hold the switch button to switch onRecordingPress and hold the switch button to switch offBy pressing and holding the switch button for more than two seconds, the camera will switch off.Ensure the switch button LED on the camera body is off. By pressing and holding the switch buttonfor more than two seconds, the camera is switched on.Ensure the switch button LED on the camera body is on. *You will be able to power on the camera body approximately two seconds after attaching the battery pack. Pressing and holding the switch button before this time has elapsed will have no effect.■Manual recordingThe camera starts and stops recording either by pushing the record button on the camera body, or by switching it on using your smartphone. One file is saved every minute. When the folder becomes full, the camera stops recording automatically.●Capturing scenery■Still image captureThe camera takes one still image by switching it on using your smartphone.While the folder is full, you cannot take any more still images.*You cannot take any still image while the camera is in manual recording mode.*You cannot take any still images by pushing the button on the camera body.●Capturing still imagesCapturing images/videos in Security mode *Security Add-On (DC200) is required. (Sold separately)■Security recording*Normal mode:When the camera detects an impact, it records 10 seconds of footage (Full HD) or 7 seconds (4K) from before, and 30 seconds from after the impact (total 40 seconds in Full HD, or 37 seconds in 4K). *Energy saving mode:When the camera detects an impact, it records footage approximately 3 seconds after the impact for 30 seconds.When the folder becomes full, the most recently saved file overwrites the oldest file.*If you turn on the car engine while recording in security mode, that portion of data will not be saved.●Recording hit-and-runs,etc.
2625154 13MEMO2TOPKP26P252017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingViewing/deleting media on your smartphone Viewing/deleting media*If you are connecting to your smartphone for the first time, refer to the procedures on pages 15 and 16.*You cannot connect to your smartphone in Security mode.Turning on Wireless LAN on the camera bodyWhen the camera is connected to the car cigarette lighter receptacle or to the Security Add-On (DC200: sold separately)Opening the app/confirming connection Open the d’Action 360 app, and check that a connection has been established.If no connection has been established, switch off the camera. Repeat the steps from procedure 1 on page 25.Viewing/deleting mediaOpen the d’Action 360 app, and check that a connection has been established.Play and delete your images/videos by following the app display.Turning on Wireless LAN on your smartphoneOn your smartphone, turn on “Wi-Fi” under “Settings.”Selecting the SSID*A password is required only when connecting for the first time. (See page 16)*A password may be required if you have changed the SSID or password, or when the OS of your smartphone has been updated.Turn on your car engine (turn on the ignition) to automatically turn on Wireless LAN.When the battery pack is attached to the cameraPress and hold the switch button for more than two seconds with the battery pack attached.After that, press the communication button .<Display example>PressCar engine is onPress and hold for more than two secondsData download timeApproximate times to transfer images and videos to your smartphone are as follows:*The above downloading times are provided for guidance only, and may differ greatly depending on the ambient environment and data content.One-minute video (4K equivalent) 640 seconds180 seconds2.5 seconds0.9 secondsOne-minute video (Full HD equivalent)One image (4K equivalent)One image(Full HD equivalent)Battery pack is attached
27 281243http://daction.carmate.jp/TOPKP28P272017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingInstalling the d’Action software on your computerViewing/deleting media on a PC Visit our website below to download and install the d’Action software onto your computer.Checking remaining storage space in the “Manual Recordings” folderThe memory LED on the camera body indicates the remaining recordable memory in the “Manual Recordings” folder.Connecting the memory card to your computerConnect the memory card to your computer by following either of the steps below.*Detach the camera body from the mount. Connect the camera body directly to your computer by using the communication cable (included in the Product).*Remove the memory card from the camera body. Connect the memory card to your computer by using a third-party card reader.Starting the d’Action software to load the filesStart the d’Action software and load the files from the memory card.Viewing/deleting mediaView your images/videos by following the software display screen.When deleting files, either delete them directly from the memory card, or format the memory card using the smartphone app. (See page 31)*Do not remove the memory card while data is being read.*Formatting a memory card will delete all of the stored files, and optimize its folder structure.*The folders “Continuous Recordings”, “Impact Recordings”, and “Security Recordings” can be overwritten. As such, the remaining memory is not indicated.Checking the remaining batteryThe switch button LED indicates the remaining battery of the attached battery pack.Pausing camera operationIn order to prevent the security recording from starting to record upon detecting any normal impacts that occur when the driver or passengers gets out of the car, the camera can be deactivated so as not to detect any impacts between one minute or ten minutes after the car engine is turned off. Deactivation can be set up using the smartphone app.*Only when the Battery Kit Add-On (DC100) is attachedUseful featuresGreen light is on 50% to 100% storage space remainingOrange light is on 20% to 49% storage space remaining Red light is on Below 19% storage space remaining, or no memory card insertedGreen light is on 50% to 100% battery remainingOrange light is on 20% to 49% battery remainingRed light is on 6% to 19% battery remainingOrange light blinking Below 5% battery remainingMemory LEDSwitch button LED
3029MEMO28801440(Unit: Pixels)4K equivalent28801440★Medium sensitivityHighest sensitivity:Impacts are easily detected in Driving modeHigh sensitivity:Impacts are easily detected in Security mode　Low sensitivity:Impacts are not easily detected in Security modeLowest sensitivity:Impacts are not easily detected in Driving mode★High sensitivityMedium sensitivityLow sensitivity*Check the detection sensitivity by knocking on the body of the vehicle.WDR *Brightness (exposure)Audio recordingCamera sound volumeDeactivation timeON ：Auto-adjust the contrast★OFF ：Do not auto-adjust the contrast★ON ：Record soundOFF ：No sound recordingLoud: Sound volume maximized★Quiet: Sound volume is normalQuiet: Sound volume is normal-2 ：Brightness (exposure) is adjusted to be darker-1★0+1+2 ：Brightness (exposure) is adjusted to be lighter★One minute: No impacts are detected forone minute after the car engine is turned off. Ten minutes: No impacts are detected for ten minutes after the car engine is turned off.①②Manual recordingImpact recordingStill image captureContinuous recordingManual recordingStill image captureSecurity recordingDriving modeAction modeDetection sensitivity(Impact recording)Detection sensitivity(Security recording)Security mode○（※）×××○○○○○○○○○○★Full HD equivalent (1440×1440)4K equivalent (2880×2880)TOPKP30292017.01月初版MacIllustratorCS6DC3000Full HD equivalentChanging the camera settingsChanging the recording resolution Changing other settingsIn some recording modes, the recording resolution can be changed to 4K equivalent.Changing settings using the smartphone app.You can change the recording mode settings as follows: The detection sensitivity is maximized when the lens faces directly below.The detection sensitivity decreases as the lens angle gets wider.★ Default settingDiagram of recorded portions★ Default setting★ Default setting*Driving mode/Power is ON (operating only during continuous recording)*Action mode/Power is ON (not recording)*During this system reset, all LEDs will blink orange. Do not turn off the power, push any buttons, or insert/remove the memory card until the orange blinking turns off.(1) While pressing down the communication button(2) Push the record button5 timesChanging the impact detection sensitivityYou can change the impact detection sensitivity levels for Impact recording in Driving mode, and for Security recording in Security mode.Change settings using the smartphone app.Changing the SSID and passwordYou can change the SSID and password.Change settings using the smartphone app.*When manually recording 4K equivalent video in Driving mode, a time lag of a few seconds occurs between pressing the recording button, and the recording starting.*All recording modes will be stopped while you are changing the camera settings on the smartphone app.Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingYou can also change the settings below.Change settings using the smartphone app.*WDR (Wide Dynamic Range)WDR (wide dynamic range) technology adjusts the brightness of video recorded in light or dark places, reducing overexposure by headlights, etc. On this camera, WDR is initially set at “off”. Please turn WDR on or change the brightness to suppress overexposure.Resetting the deviceAll set values are reset.When the Product is in either of the following states, push the record button 5 times while holding down the communication button .*This resetting process does not format or initialize the data on the memory card or the version of the camera body.
31 3212MEMOhttp://daction.carmate.jp/Recording modesManual recordingImpact recording+Security recordingContinuous recordingStill image capture16GB 32GB 64GB 128GBNumber of recorded pixelsFull HD equivalent4K equivalentFull HD equivalent4K equivalentFull HD equivalentImpact/Security recording:Full HD equivalentImpact recording: Full HD equivalentSecurity recording: 4K equivalent55 mins14 mins264 images63 images 22 mins8 mins2 mins119 mins31 mins569 images136 images49 mins19 mins5 mins247 mins65 mins1180 images281 images102 mins39 mins10 mins504 mins132 mins2400 images572 images208 mins80 mins21 minsTOPKP32P312017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingContinued on the next pageOthersGuides for approximate recording times and number of imagesFormatting the memory cardDelete all files on the memory card to optimize its folder structure.Formatting can be done using the smartphone app.*Formatting a memory card erases all of the files stored on it. Back up any important data onto a storage device (such as a PC) prior to formatting.*Ensure to format your memory card with this Product if; you are using the card for the first time, the card has been used with other devices, or the card has been formatted on a computer.*We recommend you format your memory cards every six months.*The above recording times and number of images are provided for guidance only, and are not absolutely guaranteed values. These will vary depending on the condition of use, subject, and ambient environment.Full HD equivalent: 1440×1440/4K equivalent: 2880×2880Upgrading the camera bodyThe firmware of the camera body is subject to updates due to specification changes or additional functions being added. Check the version of your camera. If a newer version has been released, please proceed to update the firmware.You can check your camera version using your smartphone app while it is wirelessly connected to the camera body.Check for the latest version on our website on the right.Downloading the latest firmware file onto your PCVisit the above website and download the latest firmware files onto your computer’s desktop.Extracting filesExtract the zip file you downloaded in procedure 1.
34333546ORIf updating has not startedIf updating has failedOR*Wait for at least three seconds after attaching the battery packbefore pressing and holding the switch button.Connect the power cableTurn on the car engineAttach the battery packPress and hold the switch button for more than two secondsTOPKP34P332017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingConnecting the memory card to your computerConnect the memory card to your computer either by directly connecting the communication cable (included with the Product) to the camera body, or by using a third-party card reader.Switching on the cameraSwitch on the camera by doing either of the following:*Attach the camera body to the mount. Insert the microUSB connector of the power cable into the camera body, and turn on your car engine (turn on the ignition).*Attach the fully charged battery pack to the camera body. Press and hold the switch button for more than two seconds.*The camera body will begin updating automatically a few seconds after the camera body is switched on. During this update, all LEDs except the memory LED will start blinking in red.*Do not turn off the power, press any buttons, or insert/remove the memory card until the red blinking turns off.*The switch button LED is blinking orange (indicating an error)> Remaining battery level is insufficient for the update to take place. Fully charge the battery and repeat procedure 6.*All LEDs are off> Check the power connection and remaining battery level.*Repeat all the procedures on page 32.Copying the extracted firmware file onto the memory cardOn your PC, open the “FIRMWARE” folder saved on the memory card.Copy and paste into this folder the “firmware.bin” file you extracted in procedure 2.*Do not change the file name “firmware.bin”.*Do not remove the memory card during data transfer.Reinserting the memory card into the camera bodyWhen the file has finished copying, remove the communication cable.If the connection has been made via a card reader, remove the memory card from the reader and insert it back to the camera body.
35 36p.28 ------------p.22-24p.28p.36p.22-24----------p.22-24p.37------p.25-26p.30p.32-34p.23p.28p.28p.22-24p.14p.26ーp.28p.14ーp.20p.7p.20p.7TOPKP36P352017.01月初版MacIllustratorCS6DC3000Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingTroubleshootingContinued on the next pageProblemI cannot switch on the camera.(Driving mode/Security mode)*Check the power cable and USB power socket are properly connected.*Check the camera body is not too hot. If the ambient temperature has exceeded the operating temperature range, cool it down and try switching it on again.*Check the battery pack is securely attached to the camera body.*The switch button will not be active for approximately two seconds after the battery pack is attached.*Press and hold the switch button for more than two seconds with the battery pack attached.*Check the remaining battery. Charge if insufficient.*Check the camera body is not too hot. If the ambient temperature has exceeded the operating temperature range, cool it down and try switching it on again.*Check the remaining memory on the memory card. The “Manual Recordings” folder may be almost full.*For Impact recordings, Security recordings, and Continuous recordings, the most recently saved file overwrites the oldest file when their respective folder becomes full. Ensure to back up any data you want to keep to an external storage device.*Check the memory card for its speed class and capacity.*Check the memory card for its speed class and capacity.*This Product records the date and time based on world standard time. When accessing the memory card with a computer, while the times may differ, this is not considered product failure.*The initial setting of the date and time may not have been completed. Keep the camera switched on for at least 40 seconds outdoors where GPS signals can be easily received. *As data is transferred wirelessly, transfer times can vary greatly depending on the environment.*Large files, especially videos recorded in 4K-equivalent, will take more time to transfer.*During Driving mode and Security mode, the switch button cannot be operated.*If this error occurs during action mode, the blinking orange light indicates the battery is low. Please charge the battery pack.I cannot switch on the camera.(Action mode)I cannot record video.Recorded data has been deleted.Data seems incorrect somehow.Date/time are set incorrectly.Data transfer time to my smartphone is slow.An error (orange light is blinking) occurs when pressing and holding the switch button.Solution PageRed on Below 19% memory remaining (“Manual Recordings” folder), or no memory card insertedOrange on 20% to 49% memory remaining (“Manual Recordings” folder)Green on 50% to 100% memory remaining (“Manual Recordings” folder)IndicationMemory LEDSwitch button LED Recording button LED Communicationbutton LEDPageIndication PageLED indicatorsGreen on Continuous recording in progressOrange blinking ErrorRed on Impact/Manual/Security recordings in progressRed blinks once Still image captureOrange on Power is ON (20% to 49% battery remaining)*Red on*Action mode onlyPower is ON (6% to 19% battery remaining)*No light is on Power is OFF, or ON (during Security/energy saving mode)No light is onOrange blinkingRed blinkingOrange blinkingRed blinkingOrange blinkingRed blinkingRecording has stoppedCamera body is resettingCamera body is being updatedGreen onGreen blinkingWireless LAN is ONCommunicating with smartphoneNo light is on Wireless LAN is OFFGreen blinking Power is ON (Security/normal mode)Orange blinking Error (below 5% battery remaining)*Green on Power is ON
37 38ーーp.7p.7ーーーp.25-26p.30p.28ーTOPK2017.01月初版MacIllustratorCS6DC3000P38P37Using this Product Safely Preparation Installation Capturing Images/Video Viewing/Deleting Media Changing Camera Settings TroubleshootingProduct name d’Action 360Product number DC3000No. of effective pixels Approximately 1.3 megapixelsCCD Backside illumination CMOS image sensor 1/2.3Frame rate Maximum 27.5 fps *Automatically adjusted in high temperaturesF-number F2.0Angle of viewDC12V (Camera body: DC5V)Horizontal 360°/Vertical 194°Power supply voltageGPS, GLONASS, Michibiki Quasi-Zenith Satellite SystemSatellitesVideo: MOV (Video: MPEG4-AVC/H.264, Audio: PCM stereo) Still image: JPEGFile formatsOne yearProduct warrantyComplies to IEEE802.11 b/g/n (2.4 GHz band)H42mm×W62mm×D64mm (camera body)H104mm×W62mm×D64mm (with mount attached)Camera body: approximately 100 grams/Mount: approximately 47 gramsWi-FiExternal dimensionsand WeightBuilt-in triaxial G sensorBuilt-in stereo microphoneWDR function installedOthers-10 to 60 degrees Celsius (Security mode)-10 to 40 degrees Celsius (Driving mode/Action mode)Operating temperature rangemicroSDHC／microSDXC (16GB to 128GB/UHS-I, Speed class 3 or higher)Recording mediad’Action app for smartphone (iOS/Android)d’Action software for PC (Windows)Video playingContinuous recording, impact recording, manual recording, still image captureSecurity recording: Security Add-On (DC200; sold separately) is required. Recording modesElectrical power consumptionNumber of recorded pixels2880×2880 (4K equivalent/approximately 8 megapixels)1440×1440 (Full HD equivalent/approximately 2 megapixels)DC12V : approximately 370mA (4K equivalent) approximately 240mA (Full HD equivalent) DC5V : approximately 800mA (4K equivalent) approximately 500mA (Full HD equivalent)Specifications*“Android”, “Google Play”, and the “Google Play Logo” are trademarks or registered trademarks of Google Inc.*The “iOS” trademark is used under license from Cisco Systems, Inc. in the United States.*Windows® is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.*microSD, microSDHC, and microSDXC are trademarks or registered trademarks of SDCard Association.Problem Solution PageAn error (orange light is blinking) occurs when pressing the record button.An error (orange light is blinking) occurs when pressing the communication button.I cannot connect to my smartphone.I cannot view images and video using he PC software.Images and videos are too light or too dark.Geotagging cannot be obtained.I cannot switch the camera to Driving mode.I cannot switch the camera to Security mode.*The folders for saving Manual recording data and Still image capture data may be almost full. Check the remaining memory on the memory card using the smartphone app.*The record button cannot be operated during Security mode or while connected to your PC.*The communication button cannot be operated as Wireless LAN cannot be switched on during Security mode.*During Security mode, the Product cannot be connected to your smartphone.*Close the smartphone app, and turn off wireless LAN. Open the app again and restart wireless LAN to see if a connection has been established. If the problem persists, turn off the smartphone app, and switch off the camera. Repeat the procedures on page 25.*Your computer device may not be supported. Check the most up-to-date list of supported devices/OS on our website.*To play video, any files having “.MOV” and “.LOG” extensions must be loaded together. Check that these two kinds of data are saved in the same folder.*Adjust WDR or brightness (exposure).*During Security mode, geotagging cannot be obtained.*Geotagging is identified based on signals received from GPS satellites. Signal reception will be difficult in areas such as tunnels and areas shielded by densely-arranged buildings, or when items that emit radio waves or magnetic forces are placed around the camera body. *After the camera is switched on, it takes at least 40 seconds to obtain geotagging.*Check the camera is connected by the USB power socket and the power cable (both included in the Product). You cannot use third-party USB power sockets or microUSB cables. Contact our service center if you need additional sockets/cables.*Check the camera is connected by the power cable (included in the Product) and the cord of the Security Add-On (DC200). You cannot use third-party microUSB cables or similar cords. Contact our service center if you need additional socket/cable.*If your car power accessory power outlet is designed to not turn off for a while after the car engine is turned off, the camera will not immediately switch to Security mode. Security mode is started when the accessory power outlet is completely switched off.
39 40Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.- The provided shielded USB cables must be used for connection to computer or peripherals in order to meet FCC emission limits and RF interference suppression.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects.Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. d’Action 360 (DC3000) has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.Product Name : d'Action360Model Number : DC3000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Responsible party : Car Mate USA,Inc Address : 383 Van Ness Ave Suite 1603, Torrance, CA 90501Phone : 310-533-1647Using this Product Safely Preparation InstallationCapturing Images/VideoViewing/Deleting MediaChanging Camera Settings TroubleshootingFCC STATEMENT
41 42MEMO WarrantyWarranty terms1. In the event your Product is damaged under normal use during the warranty period (one year from purchase date), Car Mate will repair or replace it at no extra charge.2. Even during the warranty period, the free repair and replacement shall not apply if; (i) This warranty document is not presented. (ii) The product failure/damage results from user negligence, or product failure due to unauthorized product repair and/or alteration. (iii) The Product has failed or has been damaged after purchase by transporting it, or dropping it while handling. (iv) Water or other substances from outside are detected in the Product (v) The Product failure/damage results from fire, earthquake, flood, abnormal electric voltage, pollution, use of undesignated electric voltage/radio frequencies, and/or other natural disasters. (vi) Any of the required information on this warranty document is unfilled, or altered. The purchase receipt can be attached for establishing the purchase date and the dealer. (vii) Any of the external portions of the Product are damaged.3. This warranty shall not apply to the Product mounted on illegally altered vehicles.4. This warranty shall not apply if you have lost the Product, part of the Product, and/or accessory part(s).5. This warranty shall not apply if the Product has been pre-owned or re-sold. 6. For product repair/replacement, ensure to contact Car Mate service center or the dealer at which you purchased the Product, presenting this warranty document.7. Keep this warranty document in a safe place; this will not be reissued.8. This warranty is valid only for service in Japan.Car Mate Mfg. Co., Ltd. Head Office/Nagasaki 5-33-11, Toshima-ku, Tokyo, Japan 171-0051 TEL: +81-3-5926-1212WARNING: This product can expose you to chemicals including [Antimony trioxide,Diisononyl phthalate (DINP)] ,which is known to the State of California to cause cancer.For more information, visit www.P65Warnings.ca.gov.

Navigation menu