CARMATE MFG CMDC3000 DRIVE ACTION RECORDER User Manual H1 H4
CARMATE MFG.CO.,LTD DRIVE ACTION RECORDER H1 H4
05 User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3992738 |
| Application ID | GCZ58yDQLrrcb8HCWK9MUA== |
| Document Description | 05 User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 148.87kB (1860826 bits) |
| Date Submitted | 2018-09-06 00:00:00 |
| Date Available | 2018-09-06 00:00:00 |
| Creation Date | 2017-10-04 10:35:13 |
| Producing Software | Adobe PDF library 9.00 |
| Document Lastmod | 2018-08-29 15:24:19 |
| Document Title | H1-H4 |
| Document Creator | Adobe Illustrator CS4 |
版 2017.02月 Mac Illustrator CS6 DC3000 H4 TOP H1 Warranty Document No.90-70047C This Product has been made available for purchase after having undergone strict quality control and inspection. In the event of a product failure arising from normal use, please contact the dealer at the point of purchase (see overleaf), or the Car Mate Service Center for product repair/replacement. Purchased Product Purchase Date Customer address d’Action 360 (DC3000) Year /Month/Day *Please retain proof of purchase indicating the Purchase Date alongside this Warranty Document. Warranty period for free repairs Within one year from the Purchase Date Using this Product Safely TEL. Preparation Customer name Dealer name/ address d’Action 360 Instruction Manual Installation TEL. Vehicle model: Product failure information Vehicle grade: Vehicle year: Capturing Images/Video Problem(s): Viewing/Deleting Media Car Mate Mfg. Co., Ltd. Nagasaki 5-33-11, Toshima-ku, Tokyo, Japan 171-0051 http://www.carmate.co.jp/ Changing Camera Settings Contact Car Mate service center for product information. TEL: +81-3-5926-1212 FAX: +81-3-5926-1218 Register with us and answer our questionnaire to win prizes! Visit our website for more details. For PC: http://www.carmate.co.jp/club/ For mobile or smartphone: http://mobile.carmate.co.jp/ Camera Product number: DC3000 Troubleshooting 初版 2017.01月 Mac Illustrator CS6 DC3000 P1 TOP P2 Introduction d’Action 360 features About this manual This Product is a smartphone-linked, car-mounted camera with a 360-degree panoramic view, allowing you to record any and all of the scenes encountered during your time on the road. Captured videos and still images can be downloaded straight to your smartphone on the spot, making playback and sharing possible both anytime, and anywhere. Using this Product Safely Preparation Thank you for purchasing d’Action 360. This instruction manual is your guide book to using d'Action 360 (hereinafter “Product”). To use this Product properly and safely, please read and understand the contents of this manual prior to use. After reading, please keep this manual nearby for future reference or troubleshooting. If you give this Product to somebody else, please include this manual as well. Action mode Battery Pack (DC1) (Sold separately) *Battery Kit Add-On (DC100) is required. (Sold separately) Action mode allows you to record your surroundings by taking the camera outside of your car. Just as if it were a handheld camcorder, enjoy shooting simple video and capturing stills using the camera’s recording capabilities. The camera automatically switches to Action mode upon attachment of the Battery Pack (DC1). Security mode Please note that Car Mate takes no responsibility for any loss arising from the use or failure of this Product, or from any damage to any recorded video and/or data. Security Add-On (DC200) (Sold separately) In Security mode, d’Action 360 keeps your parked car under surveillance. From keyings to hit-and-runs, d’Action 360 can record all the accidental or intentional moments that take place around your car. When the car engine is turned off with the Security Add-On (DC200) connected, the camera automatically switches to this mode. Troubleshooting Disclaimer *Security Add-On (DC200) is required. (Sold separately) Viewing/Deleting Changing Media Camera Settings The latest version of the d’Action 360 Instruction Manual is available at: http://daction.carmate.jp/ Capturing Images/Video Driving mode In Driving mode, the camera installed in your car captures both the inside of the car and the outside simultaneously. In addition to acting as a standard dashboard camera, d’Action 360 is able to simultaneously record both the road around you, and scenes from inside the vehicle. The camera automatically begins operation in Driving mode when power is supplied via your car’s cigarette lighter receptacle. Installation This Product also features three operational modes. By purchasing add-on products separately, you can utilize these modes for a wider range of purposes. 初版 2017.01月 Mac Illustrator DC3000 CS6 P3 TOP P4 Table of Contents Introduction ……………………………… 1 Useful features ……………………… 28 What kind of video can I record? ➡ p.18 *Checking the remaining storage space in the “Manual Recordings” folder *Checking the remaining battery Using this Product safely …… 5 *Pausing camera operation p.29 ⬅ I want to capture high-quality images and video. Preparation ……… 29 Changing the camera settings Product contents ………………………… 11 *Changing the recording resolution Optional add-ons ………………………… 13 *Changing the impact detection sensitivity Preparation………………………… 14 ➡ p.29 Installation *Changing the SSID and password My camera responds too quickly to impacts... *Changing other settings *Inserting the memory card *Resetting the device Others *Checking the mounting position …………………………… 31 p.31 ⬅ How many hours of footage can I record? *Approximate recording time and *Checking the view range number of images *Formatting the memory card *Upgrading the camera body Capturing images/videos ……………………………… 22 I want to check my recordings on my smartphone! ➡ p.25 *LED indicators Troubleshooting *Capturing images/videos in Driving mode ……………… 36 *Capturing images/videos in Action mode ……………………………… 38 Specifications 25 Viewing/deleting…………………… media Warranty …………………………… 42 p.14 ⬅ What type of memory card can I use? *Viewing/deleting media on a smartphone How do I update my d’Action 360 camera? *Viewing/deleting media on a PC ➡ p.32 Troubleshooting *Capturing images/videos in Security mode Viewing/Deleting Changing Media Camera Settings Installation ………………………… 19 Capturing Images/Video *Connecting to a smartphone Using this Product Safely Features of d’Action 360 …………… 2 初版 2017.01月 Mac Illustrator CS6 DC3000 P5 TOP P6 Using this Product safely In order to use this Product safely and prevent any damage caused to you and surrounding people/property, please ensure to read this manual carefully before use. This Product operates using the same frequency band (2.4GHz band) as the following instruments or radio stations: To prevent product failure or the loss of data, do not place the Product near magnetic objects. (1) Industrial, scientific, or medical devices/appliances such as microwave ovens. Cautionary symbols If the Product is handled improperly, possibility of death or serious injury is anticipated. Do not operate the Product while you are driving. Doing so may lead to accidents, and certain laws prohibit the handling of any such devices while operating a vehicle. Using this Product may cause radio-frequency interference (RFI) with the above-mentioned instruments and/or radio stations. This Product is only for use in Japan. This Product has been created to comply specifically with Japanese Radio Laws. As such, the use of this Product may be illegal in some countries outside of Japan. 1) Before use, ensure there are none of the above-mentioned instruments or radio stations in operation around the Product. 2) Stop using the Product immediately if it has ever caused any radio-frequency interference to any private, licensed radio station as described above in (2). To prevent electric shock, fire, or product failure, do not disassemble, attempt to repair, or alter this Product in any way. Improper handling of the Product may be regarded as violation of the law. Do not use the Product if condensation (water droplets) has formed on the inside. Condensation is more likely to form when the Product is moved from a low temperature environment to a high temperature environment , and may cause the Product to malfunction or heat up. Useful tips to know when handling the Product. Do not drop or apply excessive force to the Product. Keep the power cable and terminal portions clean, wiping away any dust or dirt that may have gathered. Dust and dirt can prevent secure electrical contact, which may lead to electric shock or fire. Check the Product is securely installed before driving your car. A Product that has detached or fallen down may result in injury or accidents occurring. If you are not planning on using the Product for a long period of time, unplug the power cable from the camera body. Electric discharge from the vehicle battery or fire may occur. Additionally, fire or product failure may occur if the Product has been left in a closed space, in the hot sun, or in high temperatures for an extended period of time. Do not mount the Product or distribute its cables around areas where operation of the vehicle’s airbags may be obstructed. In the event of car crash, the airbag may not work properly, or lead to an accident/injury upon inflating. This Product is not dustproof, rainproof, or waterproof. To prevent electric shock, fire or product failure, keep it away from water and other foreign matter, and do not handle with wet hands. Install the Product properly according to this manual. Keep the camera body attached to the mount while driving and during inspection. Car products mounted incorrectly may not only be regarded as a violation of your local traffic laws, but may also lead to road accidents. Radio-frequency interference may occur with other electrical devices such as the radio or vehicle GPS systems. If such interference has occurred, change the installation location. Troubleshooting Do not use the Product where it is prohibited, such as in hospitals or on an aircraft. The Product may cause pacemakers and other electronic medical devices to malfunction. Installing the Product Viewing/Deleting Changing Media Camera Settings Do not use this Product if it is broken, not working, or shows any other signs suggesting an abnormality. To prevent possible accidents or fire from occurring, stop using the Product immediately if it you notice any smoke, abnormal noises, or abnormal smells, etc. Do not suddenly accelerate or make any sharp turns for the sole purpose of checking the performance of the Product. Operating your vehicle in such a way may lead to injury or accidents. Capturing Images/Video For your safety, please follow the below instructions: Do not remove the compliance certificate label pasted on the Product. Use of an unlabeled Product is prohibited by law. Installation If the Product is handled improperly, possibility of injury or property damage is anticipated. (3) Specific low-power radio stations (stations permitted to operate without a license) Preparation Graphic symbols are used in this manual to indicate cautionary matters, based on both the level of seriousness and the subject matter. Please ensure a thorough understanding of what each symbol represents before reading. Using this Product Safely To prevent electric shock or product failure, do not insert metallic objects such as pins or wires into the apertures of the Product. (2) Private, licensed radio stations to identify and track electronic tags, used for example, on factory production lines. 初版 2017.01月 Mac Illustrator CS6 DC3000 P7 TOP P8 Powering the Product The GPS system Use the USB power socket alone. Overloading or splitting the connection may lead to the abnormal generation of heat or fire. Hold the connector portion of the power cable when unplugging. A damaged power cable may cause electric shock or fire. To prevent possible product failure, use this Product only on cars built with a DC12V negative earth electrical system. After the camera body is switched on, it may take up to approximately 30 seconds to begin recording. Depending on the ambient environment or geographical factors, the Product may not be able to adequately receive GPS signals or receive GPS signals at all. In order to receive clear GPS signals, do not place obstructive items around the Product. GPS satellites are controlled by the U.S. Department of Defense and their accuracy is subject to change without prior notice. When the Product is switched on, it may take time until it starts receiving GPS signals. Allow between 30 seconds to a few minutes, depending on the signal reception environment, weather, vehicle conditions, and position of the Product. Do not use this Product near other GPS products or VICS receiver units. Doing so may cause such products/units and this Product to malfunction. GPS signal reception may be hindered if the front windshield of your car has been surface-treated with a coating, etc. In some cars with a start-stop system, the supplied voltage may be reduced in order to restore the electric power for restarting the engine. Due to this, the power supply to this Product may be stopped. The camera body If the surface of the lens has attracted dirt, sand, fingerprints, etc., wipe clean using a dry, clean and lint-free cloth. If the camera body has become hot after using it for long amount of time, to avoid potential burns, do not allow it to come into direct contact with your skin. To prevent product failure, do not touch the terminals on the camera body. When cleaning the camera body, do not use solutions containing abrasive compounds, alcohols, or organic solvents. In some cases, your recorded images, video and/or data may constitute an infringement on the legal rights of a third party. Car Mate takes no responsibility for any matters with regard to, and arising from, the content of the images, videos and/or data recorded on this Product. Recording performance and time may vary depending on the object being recorded, or on the ambient environment. This Product is not guaranteed to produce validity as evidence for any accidents, or to identify the license plate, model or color of any vehicle. Keep the camera lens surface and all car windows clean. Irregular light reflection and refraction caused by dust and other foreign matter may affect recording quality. This Product is not guaranteed to record in any and all circumstances. Car Mate takes no responsibility for any loss arising from the use or failure of this Product, or from any damage to any recorded video and/or data. To record in highest possible quality in darkness, ensure you turn on the headlights or fog lights of your car. Recording quality may deteriorate at night, when backlit, or when the ambient lighting changes sharply. Troubleshooting Due to the characteristics of the electrical components of this Product, the surface/internal temperatures of the camera may increase depending on the conditions of use. When the ambient temperature exceeds the operating temperature range, Product operation will be stopped for protection. If Product operation is stopped, resume operation once the camera temperature has decreased. Blinking or discoloration may make it difficult to distinguish between recorded LED traffic lights. Viewing/Deleting Changing Media Camera Settings To prevent product failure, avoid exposing the camera lens to direct sunlight for long periods of time. To prevent possible deformation or fire from occurring, do not leave the camera body in areas where temperatures can rise quickly, such as on the dashboard. Do not use the recorded images, videos and/or data for illegal purposes. Capturing Images/Video Recording images, video and data Installation This Product automatically switches between its three operational modes by recognizing its electric power supply source. Ensure you use only the add-on accessory products included in this Product, or those sold separately. Some third-party USB cables and USB power sockets may not be compatible with this Product. Using this Product near a TV antenna may cause a deterioration in the reception sensitivity, flickering and/or noise from the TV set. Preparation Some cars (such as those imported from overseas) are designed to keep supplying electrical power to their cigarette lighter receptacle, even with the engine turned off. If your car falls into this category, unplug the Product when the engine is turned off. The actual position of your car is determined by microwave signals broadcast from GPS satellites. Without receiving such signals, the precise position of your car cannot be determined. Using this Product Safely The total outlet amperage of the attached USB power socket is a maximum 3.0A (amps). If the USB power socket is used in combination with other products and the total outlet amperage exceeds 3.0A, no electric power will be supplied to the camera body. The maximum electrical power consumption of this Product is approximately 800mA (at DC12V). 初版 2017.01月 Mac Illustrator CS6 TOP DC3000 P9 P10 The memory card Copyright If the memory card has become hot after using it for long amount of time, to avoid potential burns, do not allow it to come into direct contact with your skin. To prevent product failure, do not touch the memory card with oily or wet hands. Preparation To prevent the possible corruption of data or damaging the memory card, do not remove the memory card during data backup, formatting, while resetting your PC system or during operation. According to copyright law, you cannot use recorded images, videos and/or data without permission of their right holder for any purposes other than your own personal use. If you plan to use this Product at live demonstrations, shows or exhibitions, follow the rules of the organizers. Using this Product Safely Initialize (format) your memory card when: *Using a brand-new card for the first time. *Using a memory card that has been formatted on another camera or computer. *It appears that reading and writing speeds have slowed down. *You wish to delete all the data on the memory card. Memory cards are expendable supplies. After using it a certain number of times, normal recording may be impeded due to breakage in part of its memory sector. To prevent possible memory card failure and loss of data, do not drop or apply excessive force to the memory card. Installation Ensure to back up important data on other devices. Data stored on a memory card may be overwritten or deleted. To prevent possible breakage, failure and malfunction of the memory card, do not insert any foreign objects into the slots, and do not touch the terminal portion of the Product. Insert the memory card in the correct orientation until it clicks in place. To avoid damaging the memory card, do not insert it forcibly. Capturing Images/Video Before purchasing a brand-new memory card for this Product, check the specifications on page 14. Using an incompatible memory card may lead to loss of data or failed recording. Viewing/Deleting Changing Media Camera Settings Store your memory cards in a dry, cool place. To prevent possible product failure, do not switch off the camera, unplug the power cable nor detach the add-on battery pack (sold separately) while updating the camera body. 変 更 す る Security mode Car Mate takes no responsibility for any damage or loss arising from the drainage of your car battery while using the Product in security mode. Troubleshooting When using this Product in security mode, always use the Security Add-On (DC200). Never use other third-party cables to directly connect the Product to the power source, as doing so may lead to problems such as a flat car battery. 10 C 版 2017.02月 Mac Illustrator DC3000 CS6 P11 TOP P12 201702-C Product contents Before use, check the Product for the following contents. ● USB power socket x 1 ● Communication cable x 1 2 ports, total 3.0A USB connectorSwitch button/LED Cover Terminal Cable length: approx. 0.3 meter ● Cable clip x 3 ●Memory card x 1 microSDHC 16GB (UHS-I, Speed class 3) Memory card slot ● Instruction manual (this book) Installation microUSB slot Microphone (left) Microphone (right) Memory LED Slide rail portion (convex) ● d’Action app for smartphone (iOS/Android) d’Action 360 (iOS) Viewing/Deleting Changing Media Camera Settings ● Mount x 1 d’Action 360 (Android) ● Power cable x 1 Cable hook Knob I Sticky portion (adhesive tape attached) microUSB connector USB connector Cable length: approx. 4 meters Knob II ● d’Action software for PC (Windows) Slide rail portion (concave bottom) 11 12 Troubleshooting Please visit our website below for the most up-to-date list of supported devices/OS, and downloading procedures. http://daction.carmate.jp/ Release lever Capturing Images/Video Lens Preparation Record button/LED Communication button/LED Built-in GPS antenna portion Using this Product Safely microUSB connector ● Camera body x 1 初版 2017.01月 Mac Illustrator CS6 DC3000 P13 TOP Optional add-ons P14 Please purchase the following optional add-ons according to your needs. (Available as of January 2017) ● Battery Kit Add-On (DC100) ● Security Add-On (DC200) Battery pack Preparation Inserting the memory card Ensure the power is switched off. Ensure the power of the camera body is switched off, and that all the LEDs are off. This is a cable set that allows the camera to receive electric power from the battery in your car while it is parked, and keep it under surveillance. Inserting the memory card Open the cover on the camera body. Firmly insert the memory card in the correct orientation until it clicks into place. Removing the memory card Terminal portion Before using a third-party memory card, please check the compatibility below. microSDHC or microSDXC UHS-I - Speed class 3 or higher Capacity 16GB – 128GB (As of January 2017) 13 14 Troubleshooting Card type Speed class *Using incompatible memory cards may cause loss of data and/or recording failure. *Some third-party memory cards may be recognized more slowly, or be difficult to insert/remove. *Depending on the memory card capacity, start-up of the Product may take longer. Viewing/Deleting Changing Media Camera Settings MEMO Capturing Images/Video *To prevent possible damage to the memory card, do not remove the memory card during data backup, formatting, while resetting your PC system or during operation. *Ensure to back up important data on other devices. Some data on the memory card may be overwritten during use. *To prevent possible malfunction, do not store data that has been saved on a device other than this Product. *Always check the orientation of the memory card; inserting it in the wrong orientation may lead to breakage or malfunction. *Before removing the memory card, ensure the power is switched off. Removing it while the power is on may cause breakage of the card and/or corruption of data. *If the memory card has become hot after using it for long amount of time, to avoid potential burns, do not allow it to come into direct contact with your skin. Installation When removing the memory card, push it in until you hear a click, and release to allow a portion of the memory card to emerge from the camera body. Slowly pull out the pushed-out portion to remove the memory card. Visit our website below for more details. http://daction.carmate.jp/ Preparation This is a portable battery unit with built-in lithium-ion batteries. By attaching this unit to the camera body, you can use the camera outside of your car. Using this Product Safely Battery charger C 版 2017.02月 Mac Illustrator CS6 DC3000 P15 TOP 201702-C P16 Connecting to a smartphone Turning on the engine Turn on your car engine (turn on the ignition) and ensure all LEDs light up after a few seconds. Install the d’Action app on your smartphone d'Action 360 (Android) d'Action 360 (iOS) *The memory LED will also light up. Turning on Wireless LAN (Wi-Fi) on your smartphone Preparation Turn on “Wi-Fi” under settings on your smartphone. Attaching the camera body to the mount Match the convex portion of the camera body with the concave portion of the slide rail portion on the mount. Slide them into each other until they click. Slide rail portion (convex) Selecting the SSID and entering the password Capturing Images/Video By turning on “Wi-Fi” as in procedure 5, a list of connectable wireless devices will be displayed. Select the SSID that starts with “dAction360”, and enter the password. Detaching the camera body While lifting the release lever on the mount, slide the camera body out. SSID: dAction360_xxxxxxxx Password: 12345678 Connecting the power cable *Create your own SSID and password later. (See page 29.) Power cable Power cable Opening the app/confirming connection Open the d’Action 360 app, and check that a connection has been established. If you are unable to establish a connection, turn off your car engine (turn off the ignition), and start again from the procedure 4. 15 16 Troubleshooting Insert the microUSB connector on the power cable into the camera body, and the other USB connector into the USB power socket. Insert the USB power socket into your car’s cigarette lighter receptacle. *Ensure each connector is correctly oriented. Cigarette lighter USB power socket receptacle Viewing/Deleting Changing Media Camera Settings Slide rail portion (concave) Installation Using this Product Safely To play videos recorded by this Product on your smartphone, you must first download the d’Action app. Download it on App Store or Google Play. 初版 2017.01月 Mac Illustrator CS6 DC3000 P17 TOP P18 Checking the field of vision After checking the video using your smartphone, determine where the camera is mounted inside your car and how the power cable is arranged. In doing this, follow the instructions below. *Install the Product properly according to this manual. Car products mounted incorrectly may be regarded as a violation of your local traffic laws. Keep the camera body attached to the mount while driving and during inspection. While checking the video on your smartphone app, confirm an approximate position for the camera and approximate angle of the lens. *Do not start mounting yet. MEMO Figure 1 Recommended mounting position Preparation 360° Installation This Product is a whole-sky, 360-degree camera. Its recording range is hemispherical, with viewing angles 360° horizontally, and 194° vertically. (Figure 1) If the camera is mounted with the lens facing directly below, you can simultaneously record video of inside and outside of your car. (Figure 2) 20% Figure 2 View angle of recorded video Using this Product Safely Checking the mounting position 194° When mounting the camera, ensure to meet all the below requirements. Front windshield GPS antenna Troubleshooting 17 Viewing/Deleting Changing Media Camera Settings *The mounted camera does not interfere with the driver’s vision and operation of the vehicle. *The mounted camera does not block the rearview mirror, or obstruct the vehicle’s airbags. *The camera is mounted within the upper 20% portion of the windshield. (See illustration above) *The camera is mounted so that its lens is within the wiping range of the windshield wipers. *The taped part of the camera does not overlap any heated wire printed on the windshield or antennae. *If additional security or safety cameras are already in place, the camera to be mounted should not be within the view of such camera. *No cable or metallic objects should be between the front windshield and the GPS antenna. (see illustration on the right) Capturing Images/Video After determining an appropriate mounting position, remove the power cable from the camera body and detach the camera body from the mount. 18 初版 2017.01月 Mac Illustrator CS6 DC3000 P19 TOP P20 Installation Install the Product outdoors where GPS signals can be easily received. Cleaning the mounting area Turning on the engine Turn on your car engine (turn on the ignition) and ensure all LEDs light up after a few seconds. In order to set the date and time, the camera must receive GPS signals. Keep the engine running for at least 40 seconds. 19 Connecting to a smartphone After ensuring the communication LED is on, connect the camera and your smartphone wirelessly. Open the d’Action app. Troubleshooting For a neater arrangement, keep the power cable running through the cable hook located on the upper portion of the mount. Ensure to have some extra length of the power cable available in advance. Viewing/Deleting Changing Media Camera Settings Cable hook Arrange the power cable neatly using the cable clips included in the Product. *The memory LED will also light up. Capturing Images/Video Arranging the power cable Installation Attaching the camera body to the mount Match the convex portion of the camera body with the concave portion of the slide rail portion of the mount. Slide them together until they click. Cigarette lighter receptacle After inserting the microUSB connector of the power cable into the USB power socket, insert the USB power socket into your car’s cigarette lighter receptacle. Release lever *To stabilize the tape adhesion, leave the mount for at least 24 hours without the camera attached. Do not peel off and re-tape the mount, as doing so will lower the adhesiveness of the tape. *Do not drive your car until the camera body is attached to the mount. Inserting the power cable into the cigarette lighter receptacle Preparation Attaching the mount Peel the release paper off the mount. Orient the mount so the release lever faces to the right. Tape the mount firmly onto the front windshield. Using this Product Safely Open the cover to ensure the memory card is inserted. Insert the microUSB connector of the power cable into the USB power socket. Wipe the mounting surface clean with mild detergent. Wipe again with a water-soaked cloth, and then again using a dry cloth. Checking the memory card is inserted and connecting the power cable 20 初版 2017.01月 Mac Illustrator CS6 DC3000 P21 TOP P22 Capturing images/videos Adjusting the lens angle Knob II 1 Turning on the engine to switch on the camera By turning on your car engine (turning on the ignition), the camera is *The memory LED will automatically switched on to begin continuous recording. also light up. Ensure all LEDs are on within a few seconds of starting the engine. *It may take up to 30 seconds for the camera to begin recording after being switched on. Knob I MEMO Lens angle and recorded footage Back of the car interior Driving direction In Driving mode, the four types of recording modes can be used as follows. On the memory card, one folder will be created for each recording mode. Captured/recorded files are recorded in their respective folder together with geotagging (geographical identification metadata). ■Manual Recording The camera starts and stops recording either by pushing the record button on the camera body, or by switching it on using ●Capturing the inside your smartphone. One file is saved every minute. When the folder of your car becomes full, the camera stops recording automatically. ●Capturing scenery ■Impact Recording 10 seconds When the camera detects an impact, it stores the footage from 10 seconds before and 10 seconds after (20 seconds total). When the folder becomes full, the most recently saved file overwrites the oldest file. *The manual recording mode supersedes the impact recoding; in the manual mode, the camera will not record any footage even if an impact is detected. *You cannot take any still images by pushing the button on the camera body. *You cannot take any still images while the camera is in manual recording mode. *You cannot take any 4K equivalent still images while the camera is in driving mode. ●Recording continuous footage ■Continuous recording The camera records video continuously from the moment the car engine is turned on until it is turned off. One file is saved every minute. When the folder becomes full, the most recently saved file overwrites the oldest file. 1 minute 10 3 Turning off the engine to switch off the camera After fixing the lens angle, turn off your car engine (turn off the ignition). This completes the camera installation. 21 By turning off your car engine (turning off the ignition), the camera is automatically switched off. Ensure all LEDs have turned off within a few seconds of stopping the engine. 22 Troubleshooting *The camera will not record continuously in manual recording mode. Turning off the engine Viewing/Deleting Changing Media Camera Settings ●Capturing still images ■Still image capture The camera takes one still image by switching it on using your smartphone. While the folder is full, you cannot take any more still images. Capturing Images/Video ●Capturing any potential road incidents 1 minute Installation 2 Recording Preparation Adjust the lens angle depending on your preferred recording field of view. (See images below) When the lens faces the driving direction, the camera will record most of the road traffic ahead. Adjusting the lens angle to face inside the car will allow the camera to record the inside of the car, and the traffic behind it. Please set according to preference. Capturing images/videos in Driving mode Using this Product Safely While checking the app display on your connected smartphone, adjust the lens angle. Once you have determined your ideal lens angle, hold knob I firmly by hand so as not to let it turn, and turn knob II to fix the lens in place. C 版 2017.02月 Mac Illustrator CS6 DC3000 P23 TOP Capturing images/videos in Action mode P24 *Battery Kit Add-On (DC100) is required. (Sold separately) 1 Attaching the battery pack Capturing images/videos in Security mode Preparation By pressing and holding the switch button for more than two seconds, the camera is switched on. Ensure the switch button LED on the camera body is on. Press and hold *You will be able to power on the camera body for more than two seconds approximately two seconds after attaching the battery pack. Pressing and holding the switch button before this time has elapsed will have no effect. Turning off your car engine (turning off the ignition) with the security add-on (sold separately) connected will automatically stop Driving mode and momentarily switch off the camera. From here, the camera will automatically switch on and change to Security mode. Ensure the switch button LED is blinking green intermittently. 2 Recording In Action mode, two types of recording modes can be used as follows. On the memory card, one folder will be created for each recording mode; and captured/recorded files are recorded in their respective folder together with geotagging (geographical identification metadata). 1 minute *You cannot take any still image while the camera is in manual recording mode. *You cannot take any still images by pushing the button on the camera body. 4 Press and hold the switch button to switch off Do not detach the battery pack during recording. Before detaching the battery pack, stop recording and switch the power off. 23 About energy saving mode This Product is equipped with an energy saving mode, allowing for longer operation of the Product without putting strain on your car’s battery. The camera will switch automatically to this energy saving mode when either Security mode has been running for sixteen hours, or the camera body has reached a high temperature. When the camera switches to energy saving mode, the switch button LED will turn off. In addition, if the ambient temperature exceeds the operating temperature range, camera operation will be stopped for protection. 3 Turning on the engine Turning on your car engine (turning on the ignition) with the security add-on connected will automatically stop Security mode and momentarily switch off the camera. From here, the camera will automatically switch on and change to Driving mode. Ensure all LEDs have turned on within a few seconds of starting the engine. 24 Troubleshooting By pressing and holding the switch button for more than two seconds, the camera will switch off. Ensure the switch button LED on the camera body is off. *If you turn on the car engine while recording in security mode, that portion of data will not be saved. Viewing/Deleting Changing Media Camera Settings ■Still image capture The camera takes one still image by switching it on using your smartphone. While the folder is full, you cannot take any more still images. ●Recording hit-and-runs, etc. Capturing Images/Video ■Manual recording The camera starts and stops recording either by pushing the record button on the camera body, or by switching it on using your smartphone. One file is saved every minute. When the folder becomes full, the camera stops recording automatically. ■Security recording *Normal mode: Normal mode Energy saving mode When the camera detects an impact, it records 10 seconds of footage (Full HD) or 7 seconds (4K) 10 seconds 3 seconds 30 seconds (7 seconds) 30 seconds from before, and 30 seconds from after the impact (total 40 seconds in Full HD, or 37 seconds in 4K). *Energy saving mode: When the camera detects an impact, it records footage approximately 3 seconds after the impact for 30 seconds. When the folder becomes full, the most recently saved file overwrites the oldest file. Installation In Security mode, the following security recording modes can be used. Recorded files are stored in a folder on the memory card. *GPS geotagging is not recorded. 3 Recording Using this Product Safely 2 Press and hold the switch button to switch on ●Capturing still images *Security Add-On (DC200) is required. (Sold separately) 1 Turning off the engine Attach the fully charged battery pack (sold separately) to the camera body. ●Capturing scenery 201702-C 初版 2017.01月 Mac Illustrator CS6 DC3000 P25 TOP P26 Viewing/deleting media 4 Opening the app/confirming connection Viewing/deleting media on your smartphone *If you are connecting to your smartphone for the first time, refer to the procedures on pages 15 and 16. *You cannot connect to your smartphone in Security mode. 5 Viewing/deleting media When the camera is connected to the car cigarette lighter receptacle or to the Security Add-On (DC200: sold separately) Preparation Turn on your car engine (turn on the ignition) to automatically turn on Wireless LAN. Open the d’Action 360 app, and check that a connection has been established. Play and delete your images/videos by following the app display. Using this Product Safely 1 Turning on Wireless LAN on the camera body Open the d’Action 360 app, and check that a connection has been established. If no connection has been established, switch off the camera. Repeat the steps from 1 procedure 1 on page 25. Car engine is on MEMO Data download time Press and hold the switch button for more than two seconds with the battery pack attached. After that, press the communication button Approximate times to transfer images and videos to your smartphone are as follows: Press 2 Turning on Wireless LAN on your smartphone On your smartphone, turn on “Wi-Fi” under “Settings.” One-minute video (Full HD equivalent) 180 seconds One image (4K equivalent) 2.5 seconds One image (Full HD equivalent) 0.9 seconds *The above downloading times are provided for guidance only, and may differ greatly depending on the ambient environment and data content. Troubleshooting 3 Selecting the SSID *A password is required only when connecting for the first time. (See page 16) *A password may be required if you have changed the SSID or password, or when the OS of your smartphone has been updated. 25 Viewing/Deleting Changing Media Camera Settings Press and hold for more than two seconds 640 seconds Capturing Images/Video Battery pack is attached One-minute video (4K equivalent) Installation When the battery pack is attached to the camera 26 初版 2017.01月 Mac Illustrator CS6 DC3000 P27 TOP P28 Useful features Viewing/deleting media on a PC Checking remaining storage space in the “Manual Recordings” folder The memory LED on the camera body indicates the remaining recordable memory in the “Manual Recordings” folder. Visit our website below to download and install the d’Action software onto your computer. *The folders “Continuous Recordings”, “Impact Recordings”, and “Security Recordings” can be overwritten. As such, the remaining memory is not indicated. Memory LED http://daction.carmate.jp/ Green light is on Orange light is on Checking the remaining battery *Only when the Battery Kit Add-On (DC100) is attached Orange light blinking Pausing camera operation Start the d’Action software and load the files from the memory card. *Do not remove the memory card while data is being read. In order to prevent the security recording from starting to record upon detecting any normal impacts that occur when the driver or passengers gets out of the car, the camera can be deactivated so as not to detect any impacts between one minute or ten minutes after the car engine is turned off. Deactivation can be set up using the smartphone app. Viewing/deleting media Troubleshooting View your images/videos by following the software display screen. When deleting files, either delete them directly from the memory card, or format the memory card using the smartphone app. (See page 31) *Formatting a memory card will delete all of the stored files, and optimize its folder structure. 27 Viewing/Deleting Changing Media Camera Settings Starting the d’Action software to load the files 50% to 100% battery remaining 20% to 49% battery remaining 6% to 19% battery remaining Below 5% battery remaining Capturing Images/Video Green light is on Orange light is on Red light is on Installation The switch button LED indicates the remaining battery of the attached battery pack. Switch button LED Preparation Connecting the memory card to your computer Connect the memory card to your computer by following either of the steps below. *Detach the camera body from the mount. Connect the camera body directly to your computer by using the communication cable (included in the Product). *Remove the memory card from the camera body. Connect the memory card to your computer by using a third-party card reader. 20% to 49% storage space remaining Below 19% storage space remaining, or no memory card inserted Red light is on 50% to 100% storage space remaining Using this Product Safely Installing the d’Action software on your computer 28 DC3000 CS6 29 TOP P30 Changing the camera settings *All recording modes will be stopped while you are changing the camera settings on the smartphone app. Changing other settings Changing the recording resolution You can also change the settings below. Change settings using the smartphone app. Diagram of recorded portions WDR * ★ Default setting Manual recording Driving mode Impact recording Still image capture Continuous recording Security mode Manual recording Still image capture Security recording ○（※） × × × ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Brightness (exposure) 4K equivalent ★ON ：Record sound OFF ：No sound recording Camera sound volume Loud: Sound volume maximized ★Quiet: Sound volume is normal Quiet: Sound volume is normal 1440 ★One minute: No impacts are detected for 2880 (Unit: Pixels) Changing the impact detection sensitivity High sensitivity:Impacts are easily detected in Security mode Detection sensitivity ★Medium sensitivity (Security recording) Low sensitivity:Impacts are not easily detected in Security mode one minute after the car engine is turned off. Deactivation time *WDR (Wide Dynamic Range) WDR (wide dynamic range) technology adjusts the brightness of video recorded in light or dark places, reducing overexposure by headlights, etc. On this camera, WDR is initially set at “off”. Please turn WDR on or change the brightness to suppress overexposure. Ten minutes: No impacts are detected for ten minutes after the car engine is turned off. ★ Default setting Resetting the device All set values are reset.When the Product is in either of the following states, push the record button 5 times while holding down the communication button *This resetting process does not format or initialize the data on the memory card or the version of the camera body. *Driving mode/Power is ON (operating only during continuous recording) *Action mode/Power is ON (not recording) *Check the detection sensitivity by knocking on the body of the vehicle. ★ Default setting *During this system reset, all LEDs will blink orange. Do not turn off the power, push any buttons, or insert/remove the memory card until the orange blinking turns off. ① You can change the SSID and password. Change settings using the smartphone app. (2) Push the record button 5 times 29 (1) While pressing down the communication button 30 Troubleshooting ② Changing the SSID and password Viewing/Deleting Changing Media Camera Settings You can change the impact detection Highest sensitivity:Impacts are easily detected in Driving mode sensitivity levels for Impact recording Detection sensitivity ★High sensitivity in Driving mode, and for Security Medium sensitivity (Impact recording) recording in Security mode. Low sensitivity Change settings using Lowest sensitivity:Impacts are not easily detected in Driving mode the smartphone app. The detection sensitivity is maximized when the lens faces directly below.The detection sensitivity decreases as the lens angle gets wider. Audio recording MEMO Capturing Images/Video *When manually recording 4K equivalent video in Driving mode, a time lag of a few seconds occurs between pressing the recording button, and the recording starting. Full HD equivalent -2 ：Brightness (exposure) is adjusted to be darker -1 ★0 +1 +2 ：Brightness (exposure) is adjusted to be lighter Installation Action mode ★Full HD equivalent (1440×1440) Preparation 4K equivalent (2880×2880) ON ：Auto-adjust the contrast ★OFF ：Do not auto-adjust the contrast Using this Product Safely In some recording modes, the recording resolution can be changed to 4K equivalent. Changing settings using the smartphone app. You can change the recording mode settings as follows: 2880 Mac Illustrator 2017.01月 1440 初版 初版 Mac Illustrator 2017.01月 CS6 DC3000 P31 TOP P32 Others Guides for approximate recording times and number of images Recording modes Continuous recording 32GB 64GB 128GB Full HD equivalent 55 mins 119 mins 247 mins 504 mins 4K equivalent 14 mins 31 mins 65 mins 132 mins Full HD equivalent 264 images 569 images 1180 images 2400 images 4K equivalent 63 images 136 images 281 images 572 images Full HD equivalent 22 mins 49 mins 102 mins 208 mins 8 mins 19 mins 39 mins 80 mins 2 mins 5 mins 10 mins 21 mins Impact/Security recording: Impact recording Full HD equivalent Security recording Impact recording: Full HD equivalent Security recording: 4K equivalent MEMO You can check your camera version using your smartphone app while it is wirelessly connected to the camera body. Check for the latest version on our website on the right. http://daction.carmate.jp/ 1 Downloading the latest firmware file onto your PC Visit the above website and download the latest firmware files onto your computer’s desktop. *The above recording times and number of images are provided for guidance only, and are not absolutely guaranteed values. These will vary depending on the condition of use, subject, and ambient environment. Viewing/Deleting Changing Media Camera Settings 2 Extracting files Extract the zip file you downloaded in procedure 1. Formatting the memory card Delete all files on the memory card to optimize its folder structure. Formatting can be done using the smartphone app. *Formatting a memory card erases all of the files stored on it. Back up any important data onto a storage device (such as a PC) prior to formatting. Continued on the next page 32 Troubleshooting *Ensure to format your memory card with this Product if; you are using the card for the first time, the card has been used with other devices, or the card has been formatted on a computer. *We recommend you format your memory cards every six months. 31 Capturing Images/Video Full HD equivalent: 1440×1440/4K equivalent: 2880×2880 The firmware of the camera body is subject to updates due to specification changes or additional functions being added. Check the version of your camera. If a newer version has been released, please proceed to update the firmware. Installation 16GB Preparation Still image capture Number of recorded pixels Using this Product Safely Manual recording Upgrading the camera body 初版 2017.01月 TOP Mac Illustrator CS6 DC3000 P33 P34 3 Connecting the memory card to your computer Connect the memory card to your computer either by directly connecting the communication cable (included with the Product) to the camera body, or by using a third-party card reader. Switching on the camera Connect the power cable OR Using this Product Safely Switch on the camera by doing either of the following: *Attach the camera body to the mount. Insert the microUSB connector of the power cable into the camera body, and turn on your car engine (turn on the ignition). *Attach the fully charged battery pack to the camera body. Press and hold the switch button for more than two seconds. Preparation On your PC, open the “FIRMWARE” folder saved on the memory card. Copy and paste into this folder the “firmware.bin” file you extracted in procedure 2. OR Press and hold the switch button for more than two seconds Attach the battery pack When the file has finished copying, remove the communication cable. If the connection has been made via a card reader, remove the memory card from the reader and insert it back to the camera body. *The camera body will begin updating automatically a few seconds after the camera body is switched on. During this update, all LEDs except the memory LED will start blinking in red. *Do not turn off the power, press any buttons, or insert/remove the memory card until the red blinking turns off. If updating has not started If updating has failed *Repeat all the procedures on page 32. 33 34 Troubleshooting *The switch button LED is blinking orange (indicating an error) > Remaining battery level is insufficient for the update to take place. Fully charge the battery and repeat procedure 6. *All LEDs are off > Check the power connection and remaining battery level. Viewing/Deleting Changing Media Camera Settings 5 Reinserting the memory card into the camera body *Wait for at least three seconds after attaching the battery pack before pressing and holding the switch button. Capturing Images/Video *Do not change the file name “firmware.bin”. *Do not remove the memory card during data transfer. Installation Turn on the car engine 4 Copying the extracted firmware file onto the memory card 初版 2017.01月 Mac Illustrator CS6 DC3000 P35 TOP P36 Troubleshooting Solution Problem LED indicators Memory LED Page Green on 50% to 100% memory remaining (“Manual Recordings” folder) Orange on 20% to 49% memory remaining (“Manual Recordings” folder) Red on Below 19% memory remaining (“Manual Recordings” folder), or no memory card inserted *Check the power cable and USB power socket are properly connected. *Check the camera body is not too hot. If the ambient temperature has exceeded the operating temperature range, cool it down and try switching it on again. *The switch button will not be active for approximately two seconds after the battery pack is attached. I cannot switch on the camera. (Action mode) p.28 Indication Green on Green blinking Red on No light is on Power is ON (20% to 49% battery remaining)* Power is ON (6% to 19% battery remaining)* Power is OFF, or ON (during Security/energy saving mode) Error (below 5% battery remaining)* Green on Red on Red blinks once No light is on Orange blinking Green on Green blinking No light is on Orange blinking Orange blinking Orange blinking Red blinking Red blinking Red blinking p.28 p.22-24 p.36 Recorded data has been deleted. Data seems incorrect somehow. Continuous recording in progress Impact/Manual/Security recordings in progress Still image capture p.22-24 Date/time are set incorrectly. Recording has stopped Error p.37 Wireless LAN is ON Communicating with smartphone p.25-26 Wireless LAN is OFF Camera body is resetting Camera body is being updated p.30 p.32-34 Data transfer time to my smartphone is slow. An error (orange light is blinking) occurs when pressing and holding the switch button. *Check the remaining memory on the memory card. The “Manual Recordings” folder may be almost full. *Check the memory card for its speed class and capacity. p.14 *Check the memory card for its speed class and capacity. p.14 *This Product records the date and time based on world standard time. When accessing the memory card with a computer, while the times may differ, this is not considered product failure. ー *The initial setting of the date and time may not have been completed. Keep the camera switched on for at least 40 seconds outdoors where GPS signals can be easily received. p.20 *As data is transferred wirelessly, transfer times can vary greatly depending on the environment. *Large files, especially videos recorded in 4K-equivalent, will take more time to transfer. *During Driving mode and Security mode, the switch button cannot be operated. *If this error occurs during action mode, the blinking orange light indicates the battery is low. Please charge the battery pack. *Action mode only 35 p.28 *For Impact recordings, Security recordings, and Continuous recordings, the most recently saved file overwrites the oldest file when their respective folder p.22-24 becomes full. Ensure to back up any data you want to keep to an external storage device. Continued on the next page 36 p.26 ー p.28 Troubleshooting Power is ON (Security/normal mode) p.22-24 I cannot record video. Viewing/Deleting Changing Media Camera Settings Orange blinking Power is ON p.7 Capturing Images/Video Orange on Page Installation *Check the camera body is not too hot. If the ambient temperature has exceeded the operating temperature range, cool it down and try switching it on again. Communication button LED p.23 *Press and hold the switch button for more than two seconds with the battery pack attached. Preparation Recording button LED p.7 *Check the battery pack is securely attached to the camera body. p.28 *Check the remaining battery. Charge if insufficient. Switch button LED p.20 Using this Product Safely Indication I cannot switch on the camera. (Driving mode/ Security mode) Page 初版 2017.01月 Mac Illustrator CS6 DC3000 P37 TOP P38 Specifications Problem *The folders for saving Manual recording data and Still image capture data may be almost full. Check the remaining memory on the memory card using the smartphone app. *The record button cannot be operated during Security mode or while connected to your PC. An error (orange light is *The communication button cannot be operated as Wireless LAN cannot be switched on blinking) occurs when pressing the communication button. during Security mode. I cannot connect to my smartphone. *To play video, any files having “.MOV” and “.LOG” extensions must be loaded together. Check that these two kinds of data are saved in the same folder. *Adjust WDR or brightness (exposure). ー ー p.25-26 DC3000 Number of recorded pixels 2880×2880 (4K equivalent/approximately 8 megapixels) Approximately 1.3 megapixels CCD Backside illumination CMOS image sensor 1/2.3 Frame rate Maximum 27.5 fps *Automatically adjusted in high temperatures F-number F2.0 Angle of view Horizontal 360°/Vertical 194° Power supply voltage DC12V (Camera body: DC5V) Electrical power consumption Satellites ー p.30 Recording modes ー *If your car power accessory power outlet is designed to not turn off for a while after the car engine is turned off, the camera will not immediately switch to Security mode. Security mode is started when the accessory power outlet is completely switched off. 37 Security recording: Security Add-On (DC200; sold separately) is required. Recording media microSDHC／microSDXC (16GB to 128GB/UHS-I, Speed class 3 or higher) Video playing d’Action app for smartphone (iOS/Android) d’Action software for PC (Windows) Wi-Fi Complies to IEEE802.11 b/g/n (2.4 GHz band) H42mm×W62mm×D64mm (camera body) H104mm×W62mm×D64mm (with mount attached) Camera body: approximately 100 grams/Mount: approximately 47 grams p.7 Built-in triaxial G sensor Others *Check the camera is connected by the power cable (included in the Product) and the cord of the Security Add-On (DC200). You cannot use third-party microUSB cables or similar cords. Contact our service center if you need additional socket/cable. Continuous recording, impact recording, manual recording, still image capture Built-in stereo microphone WDR function installed p.7 ー Operating temperature range -10 to 60 degrees Celsius (Security mode) Product warranty One year -10 to 40 degrees Celsius (Driving mode/Action mode) *“Android”, “Google Play”, and the “Google Play Logo” are trademarks or registered trademarks of Google Inc. *The “iOS” trademark is used under license from Cisco Systems, Inc. in the United States. *Windows® is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. *microSD, microSDHC, and microSDXC are trademarks or registered trademarks of SDCard Association. 38 Troubleshooting I cannot switch the camera to Security mode. *Check the camera is connected by the USB power socket and the power cable (both included in the Product). You cannot use third-party USB power sockets or microUSB cables. Contact our service center if you need additional sockets/cables. GPS, GLONASS, Michibiki Quasi-Zenith Satellite System Video: MOV (Video: MPEG4-AVC/H.264, Audio: PCM stereo) Still image: JPEG External dimensions and Weight *After the camera is switched on, it takes at least 40 seconds to obtain geotagging. I cannot switch the camera to Driving mode. DC5V : approximately 800mA (4K equivalent) approximately 500mA (Full HD equivalent) Viewing/Deleting Changing Media Camera Settings *Geotagging is identified based on signals received from GPS satellites. Signal reception will be difficult in areas such as tunnels and areas shielded by densely-arranged buildings, or when items that emit radio waves or magnetic forces are placed around the camera body. DC12V : approximately 370mA (4K equivalent) approximately 240mA (Full HD equivalent) File formats *During Security mode, geotagging cannot be obtained. Geotagging cannot be obtained. 1440×1440 (Full HD equivalent/approximately 2 megapixels) No. of effective pixels Capturing Images/Video Images and videos are too light or too dark. *Your computer device may not be supported. Check the most up-to-date list of supported devices/OS on our website. ー d’Action 360 Product number Installation I cannot view images and video using he PC software. *Close the smartphone app, and turn off wireless LAN. Open the app again and restart wireless LAN to see if a connection has been established. If the problem persists, turn off the smartphone app, and switch off the camera. Repeat the procedures on page 25. p.28 Product name Preparation *During Security mode, the Product cannot be connected to your smartphone. Page Using this Product Safely An error (orange light is blinking) occurs when pressing the record button. Solution FCC STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Installation Capturing Images/Video Viewing/Deleting Changing Media Camera Settings This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Product Name : d'Action360 Model Number : DC3000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible party : Car Mate USA,Inc Address : 383 Van Ness Ave Suite 1603, Torrance, CA 90501 Phone : 310-533-1647 Preparation Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Using this Product Safely - The provided shielded USB cables must be used for connection to computer or peripherals in order to meet FCC emission limits and RF interference suppression. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. d’Action 360 (DC3000) has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. Troubleshooting 39 40 MEMO Warranty Warranty terms 1. In the event your Product is damaged under normal use during the warranty period (one year from purchase date), Car Mate will repair or replace it at no extra charge. 2. Even during the warranty period, the free repair and replacement shall not apply if; (i) This warranty document is not presented. (ii) The product failure/damage results from user negligence, or product failure due to unauthorized product repair and/or alteration. (iii) The Product has failed or has been damaged after purchase by transporting it, or dropping it while handling. (iv) Water or other substances from outside are detected in the Product (v) The Product failure/damage results from fire, earthquake, flood, abnormal electric voltage, pollution, use of undesignated electric voltage/radio frequencies, and/or other natural disasters. (vi) Any of the required information on this warranty document is unfilled, or altered. The purchase receipt can be attached for establishing the purchase date and the dealer. (vii) Any of the external portions of the Product are damaged. 3. This warranty shall not apply to the Product mounted on illegally altered vehicles. 4. This warranty shall not apply if you have lost the Product, part of the Product, and/or accessory part(s). 5. This warranty shall not apply if the Product has been pre-owned or re-sold. 6. For product repair/replacement, ensure to contact Car Mate service center or the dealer at which you purchased the Product, presenting this warranty document. 7. Keep this warranty document in a safe place; this will not be reissued. 8. This warranty is valid only for service in Japan. Car Mate Mfg. Co., Ltd. Head Office/Nagasaki 5-33-11, Toshima-ku, Tokyo, Japan 171-0051 TEL: +81-3-5926-1212 WARNING: This product can expose you to chemicals including [Antimony trioxide,Diisononyl phthalate (DINP)] ,which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov. 41 42
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2017:10:04 10:35:13+09:00 Creator : Adobe Illustrator CS4 Modify Date : 2018:08:29 15:24:19+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2018:08:29 15:24:19+09:00 Creator Tool : Adobe Illustrator CS4 Format : application/pdf Title : H1-H4 Document ID : uuid:2aa245df-c32a-4a54-a322-709c3aa6d238 Instance ID : uuid:8d898295-1b3d-4651-855c-59a90b21c0e2 Producer : Adobe PDF library 9.00 Page Count : 22EXIF Metadata provided by EXIF.tools