CC and C Technologies BT0002M1 Bluetooth Module User Manual DataSheet BT 0002M 1

CC&C; Technologies, Inc. Bluetooth Module DataSheet BT 0002M 1

Manual

Bluetooth ModuleBT-0002M-1User’s GuideVersion 1.1 Technologies, Inc. 8F, No. 150, Jian Yi Road, Chung Ho City,Taipei County, Taiwan 235, R.O.C.Tel: 886-2-8226-5088 Fax: 886-2-8226-5077http://www.ccandc.com.twE-mail: marketing@ccandc.com.tw
Confidential2Technologies, Inc.BT-0002M-1Bluetooth ModuleFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. ● Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.
Confidential3Technologies, Inc.BT-0002M-1Bluetooth Module This device is intended only for OEM integrators under the following conditions:1) The transmitter module may not be co-located with any other transmitter or antenna.As long as condition above are met, further transmitter test will not be required. However,the OEM integrator is still responsible for testing their end-product for any additionalcompliance requirements required with this module installed (for example, digital deviceemissions, PC peripheral requirements, etc.).IMPORTANT NOTE: In the event that these conditions can not be met (for examplecertain laptop configurations or co-location with another transmitter), then the FCCauthorization is no longer considered valid and the FCC ID can not be used on the finalproduct. In these circumstances, the OEM integrator will be responsible for re-evaluatingthe end product (including the transmitter) and obtaining a separate FCC authorization.End Product LabelingThe final end product must be labeled in a visible area with the following: “Contains TXFCC ID: PANBT0002M1”. Manual Information That Must be Included The users manual for OEM integrators must include the following information in aprominent location “ IMPORTANT NOTE: To comply with FCC RF exposure compliancerequirements, the antenna used not be co-located or operating in conjunction with any otherantenna or transmitter.
Confidential4Technologies, Inc.BT-0002M-1Bluetooth ModuleDescriptionCC&C Technologies, Inc. provides various Bluetooth products. They are suitable forcustomers to exploit them to implement Bluetooth functionality into various electronic devices. Thefeatures of Bluetooth module list as below:FeaturesModel Name BT-0002M-1Standard Bluetooth v1.1Frequency Band 2.4~2.4835GHz unlicensed ISM bandSpread Spectrum FHSS (Frequency Hopping Spread Spectrum)RF Output Power Class 2 (under 4 dBm)Antenna terminal 50 OhmDC power 3.3VI/O InterfaceUSB Compliant USB V1.1UART Baud rate up to 921KPCM YesPIO 12 PIODimension 15 x 23 mmPhotosBT-0002M-1
Confidential5Technologies, Inc.BT-0002M-1Bluetooth ModuleElectrical CharacteristicsAbsolute Maximum RatingsModel Name BT-0002M-1 UnitSupply Voltage Max. 3.5V VTyp. 3.3V VMin 2.8V VStorage Temperature Max. 85 ocMin. -40 ocRecommend Operation ConditionsModel Name BT-0002M-1 UnitSupply Voltage Max. 3.5V VTyp. 3.3V VMin 2.8V VOperation Temperature Max. 70 ocMin. 0 ocInput/Output Terminal CharacteristicsModel Name BT-0002M-1 UnitDigital (UART, PIO)VIL – Max +0.8 VMin -0.4 VVIH – Max 3.7 VMin 2.31 VUSBVIL – Max 0.99 VMin - VVIH – Max - VMin 2.31 VVOL – Max 0.2 VMin 0 VVOH – Max 3.3 VMin 2.8 V
Confidential6Technologies, Inc.BT-0002M-1Bluetooth ModuleElectrical Characteristics - ContinueCurrent ConsumptionModel Name BT-0002M-1 UnitMode -ActiveACL data transfer 115.2 Kbps UART (Master) 30mA mAACL data transfer 720 Kbps USB (Master) 75mA mAACL data transfer 720 Kbps USB (Slave) 75mA mASCO connection HV3 (Master) TBA mASCO connection HV3 (Slave) TBA mASCO connection HV1 (Master) TBA mASCO connection HV1 (Slave) TBA mAMode -IdleUART interface 2mA mAUSB interface 6mA mA
Confidential7Technologies, Inc.BT-0002M-1Bluetooth ModuleRadio Characteristics -TransmissionTransmissionItem Measure Bluetooth Spec. NoteOutput Power 3dBm2400.94 >2400MHzFrequency Range2481.06 <2483.5MHzMeasuring the –30dBm pointwhen use channel 0 and 792402 MHz 800k <1MHz2441 MHz 800k <1MHz20 dB Bandwidth2480 MHz 800k <1MHz|M-N|=2 -25dBm≤ -20dBmTransmit OutputSpectrumAdjacent ChannelPower |M-N|≥3-45dBm ≤ -40dBm .Modulation Characteristics∆F1max00001111 payload∆F1avg 167k 140 ≤ ∆F1avg≤ 175KHz∆F2max 195k ≥ 115KHz at least 99.9%01010101 payload ∆F2avg∆F2avg/∆F1avg1.04 ≥ 0.82402 MHz 6.24k ± 75KHz2441 MHz 6.4k ± 75KHzInitial CarrierFrequencyTolerance 2480 MHz 2.66k ± 75KHz1 slot -17K ± 25KHz3 slot -13K ± 40KHzCarrier Frequency Drift5 slot -15K ± 40KHz1 slot -0.2K KHz /us3 slot -0.2K KHz /usModulation TestFrequency DriftRate5 slot -0.3K KHz /us
Confidential8Technologies, Inc.BT-0002M-1Bluetooth ModuleRadio Characteristics -ReceiverReceiverItem Measure Bluetooth Specification NoteSensitivity - Single slot packets (DH1) -83 dBm ≤ -70dBmSensitivity - Multi-slot packets (DH3) -83 dBm ≤ -70dBmSensitivity - Multi-slot packets (DH5) -83 dBm ≤ -70dBmC/I performanceCo channel interference, C/Ico-channel TBA 11dBAdjacent 1MHz interference, C/I1MHz TBA 0dBAdjacent 2MHz interference, C/I2MHzTBA -30dBAdjacent ≥3MHz interference, C/I≥3MHzTBA -40dBImage frequency Interference, C/IImageTBA -9dBAdjacent 1MHz interference to in-bandmirror frequency, C/IImage±1MHzTBA -20dBBlocking performance TBA30MHz – 2000MHz TBA -10dBm Interfering signal power level2000 – 2400MHz TBA -27dBm Interfering signal power level2500 – 3000MHz TBA -27dBm Interfering signal power level3000MHz – 12.75GHz TBA -10dBm Interfering signal power levelIntermodulation Performance TBABit Error Rate ≤ 0.1%Maximum Input Level PASS ≥ -20dBm
Confidential9Technologies, Inc.BT-0002M-1Bluetooth ModulePin Assignment and Mechanical Drawing
Confidential10Technologies, Inc.BT-0002M-1Bluetooth ModuleCC&C Technologies, Inc. reserves the right to make technical changes to its product as part of itsdevelopment.While every care has been take to ensure the accuracy of the contents of this document, CC&C can noaccept responsibility for any errors. All data and specifications are subject to change without notice.All the trademarks of products and companies mentioned in this data sheet belong to their respective.Life Support Policy and Use in safety-Critical Application.These products are not designed for use in life support appliances, devices, or systems where malfunction ofthese products can reasonably be expected toresult in personal injury.

Navigation menu