CC and C Technologies BT0002M1 Bluetooth Module User Manual DataSheet BT 0002M 1

Download:
Mirror Download [FCC.gov]
Document ID	289119
Application ID	uUQnNnytYQKVfSNKpT3C/Q==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.89kB (373615 bits)
Date Submitted	2002-12-11 00:00:00
Date Available	2002-12-10 00:00:00
Creation Date	2002-12-02 05:32:01
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2002-12-02 17:16:06
Document Title	Microsoft Word - DataSheet_BT-0002M-1.doc
Document Creator	ADOBEPS4.DRV Version 4.50
Document Author:	demi

Technologies, Inc.
8F, No. 150, Jian Yi Road, Chung Ho City,
Taipei County, Taiwan 235, R.O.C.
Tel: 886-2-8226-5088
Fax: 886-2-8226-5077
http://www.ccandc.com.tw
E-mail: marketing@ccandc.com.tw
Bluetooth Module
BT-0002M-1
User’s Guide
Version 1.1
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Confidential
BT-0002M-1
Bluetooth Module
Technologies, Inc.
This device is intended only for OEM integrators under the following conditions:
1) The transmitter module may not be co-located with any other transmitter or antenna.
As long as condition above are met, further transmitter test will not be required. However,
the OEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed (for example, digital device
emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains TX
FCC ID: PANBT0002M1”.
Manual Information That Must be Included
The users manual for OEM integrators must include the following information in a
prominent location “ IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements, the antenna used not be co-located or operating in conjunction with any other
antenna or transmitter.
Confidential
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Description
CC&C Technologies, Inc. provides various Bluetooth products. They are suitable for
customers to exploit them to implement Bluetooth functionality into various electronic devices. The
features of Bluetooth module list as below:
Features
Model Name
Standard
Frequency Band
Spread Spectrum
RF Output Power
Antenna terminal
DC power
I/O Interface
USB
UART
PCM
PIO
Dimension
BT-0002M-1
Bluetooth v1.1
2.4~2.4835GHz unlicensed ISM band
FHSS (Frequency Hopping Spread Spectrum)
Class 2 (under 4 dBm)
50 Ohm
3.3V
Compliant USB V1.1
Baud rate up to 921K
Yes
12 PIO
15 x 23 mm
Photos
BT-0002M-
Confidential
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Electrical Characteristics
Absolute Maximum Ratings
Model Name
Supply Voltage
Storage Temperature
BT-0002M-1
3.5V
3.3V
2.8V
85
-40
Max.
Typ.
Min
Max.
Min.
Unit
Recommend Operation Conditions
Model Name
Supply Voltage
Operation Temperature
BT-0002M-1
3.5V
3.3V
2.8V
70
Max.
Typ.
Min
Max.
Min.
Unit
Input/Output Terminal Characteristics
Model Name
Digital (UART, PIO)
BT-0002M-1
Unit
VIL – Max
Min
VIH – Max
Min
+0.8
-0.4
3.7
2.31
VIL – Max
Min
VIH – Max
Min
VOL – Max
Min
VOH – Max
Min
0.99
2.31
0.2
3.3
2.8
USB
Confidential
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Electrical Characteristics - Continue
Current Consumption
Model Name
Mode -Active
BT-0002M-1
Unit
ACL data transfer 115.2 Kbps UART (Master)
ACL data transfer 720 Kbps USB (Master)
ACL data transfer 720 Kbps USB (Slave)
SCO connection HV3 (Master)
SCO connection HV3 (Slave)
SCO connection HV1 (Master)
SCO connection HV1 (Slave)
30mA
75mA
75mA
TBA
TBA
TBA
TBA
mA
mA
mA
mA
mA
mA
mA
UART interface
USB interface
2mA
6mA
mA
mA
Mode -Idle
Confidential
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Radio Characteristics -Transmission
Transmission
Item
Measure
2400.94
>2400MHz
2481.06
<2483.5MHz
2402 MHz
2441 MHz
2480 MHz
|M-N|=2
|M-N|≥3
800k
800k
800k
-25dBm
-45dBm
<1MHz
<1MHz
<1MHz
∆F1max
∆F1avg
∆F2max
167k
195k
140 ≤ ∆F1avg ≤ 175KHz
≥ 115KHz at least 99.9%
1.04
6.24k
6.4k
2.66k
-17K
-13K
-15K
≥ 0.8
± 75KHz
± 75KHz
± 75KHz
± 25KHz
± 40KHz
± 40KHz
-0.2K
-0.2K
-0.3K
KHz /us
KHz /us
KHz /us
Transmit Output
Spectrum
Frequency Range
Adjacent Channel
Power
Modulation Characteristics
00001111 payload
Modulation Test
01010101 payload
∆F2avg
∆F2avg /∆F1avg
Initial Carrier
Frequency
Tolerance
Carrier Frequency
Drift
2402 MHz
2441 MHz
2480 MHz
1 slot
3 slot
5 slot
Frequency Drift
Rate
1 slot
3 slot
5 slot
Confidential
Note
3dBm
Output Power
20 dB Bandwidth
Bluetooth Spec.
≤ -20dBm
≤ -40dBm
Measuring the –30dBm point
when use channel 0 and 79
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Radio Characteristics -Receiver
Receiver
Item
Sensitivity - Single slot packets (DH1)
Measure Bluetooth Specification
-83 dBm ≤ -70dBm
Sensitivity - Multi-slot packets (DH3)
-83 dBm ≤ -70dBm
Sensitivity - Multi-slot packets (DH5)
-83 dBm ≤ -70dBm
Note
Bit Error Rate ≤ 0.1%
C/I performance
Co channel interference, C/Ico-channel
TBA
11dB
Adjacent 1MHz interference, C/I1MHz
TBA
0dB
Adjacent 2MHz interference, C/I2MHz
TBA
-30dB
Adjacent ≥3MHz interference, C/I≥3MHz
TBA
-40dB
Image frequency Interference, C/IImage
TBA
-9dB
Adjacent 1MHz interference to in-band
mirror frequency, C/IImage±1MHz
TBA
-20dB
Blocking performance
30MHz – 2000MHz
2000 – 2400MHz
2500 – 3000MHz
3000MHz – 12.75GHz
Intermodulation Performance
TBA
TBA
TBA
TBA
TBA
TBA
-10dBm
-27dBm
-27dBm
-10dBm
Maximum Input Level
Confidential
PASS
≥ -20dBm
Interfering signal power level
Interfering signal power level
Interfering signal power level
Interfering signal power level
BT-0002M-1
Bluetooth Module
Technologies, Inc.
Pin Assignment and Mechanical Drawing
Confidential
BT-0002M-1
Bluetooth Module
Technologies, Inc.
CC&C Technologies, Inc. reserves the right to make technical changes to its product as part of its
development.
While every care has been take to ensure the accuracy of the contents of this document, CC&C can no
accept responsibility for any errors. All data and specifications are subject to change without notice.
All the trademarks of products and companies mentioned in this data sheet belong to their respective.
Life Support Policy and Use in safety-Critical Application.
These products are not designed for use in life support appliances, devices, or systems where malfunction of
these products can reasonably be expected toresult in personal injury.
Confidential
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:12:02 05:32:01Z
Modify Date                     : 2002:12:02 17:16:06+08:00
Page Count                      : 10
Creation Date                   : 2002:12:02 05:32:01Z
Mod Date                        : 2002:12:02 17:16:06+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : demi
Metadata Date                   : 2002:12:02 17:16:06+08:00
Creator                         : demi
Title                           : Microsoft Word - DataSheet_BT-0002M-1.doc

EXIF Metadata provided by EXIF.tools