CDVI WIRELESS S P A 024A TRANSMITTER MODEL ERONE 024A User Manual Instructions

CDVI WIRELESS S.P.A. TRANSMITTER MODEL ERONE 024A Instructions

Users Manual

RCS - 433LS1A - General informationThe radiocontrol RCS-433LS has been designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system. (KeeLoq ® Hopping code). The code sent by the transmitter changes at each activation, avoiding any scanning and copying risk. A special algorithm allows to keep synchronysed transmitter and receiver. The operating frequency is 433,92 MHz.The receiver which makes the activation, once received the transmitter code, has to be connected during the installation to the device to control CONTENTS1A - General information1B - Technical specifications1C - Main features1 - TRANSMITTER INTRODUCTION2 - CODING3 - MEMORIZATION4 - BATTERY ACCESS5 - TROUBLESHOOTINGGETTINGSTARTED1B - Technical specificationsNumber of keys: 2 / 4Supply : 1 Alkaline Battery 12V type 23ABattery life: 12 - 18 monthsCurrent consumption : 25 mAOperating frequency : 433.92 MHz64Code combinations : 2Modulation : AM / ASKRated e.r.p. : 50 - 100 µWRange in free space: 60 - 120 ydOperating temperature: -20 ÷ +55 °COverall dimensions: 3.26 x 1.88 x 0.62 inWeight: 20 gr.( gate, garage door, rolling shutters, sun-blinds, anti-burglar appliances, lighting ). All the receivers of the range RCS-433S can store into the EEPROM a serial number, a manufacturer key and a synchronism algorithm of more transmitters. Each transmitter ( or its different keys ) can be stored into different receivers and hence can do more functions. In order to use the unused keys of the transmitter it is enough to connect the dedicated receiver to the mechanism to drive ( i.e. electrolock of a pedestrian gate, a buzzer, etc. ).The product fully complies with the European Directives 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations.1C - Main featuresPush-button CRed LEDThank you for choosing a RCS product. You are recommended to read this manual carefully before installing the product.RCSPush-button APush-button BPush-button DBattery doorKey holder ringStand aloneRCS-433LS2RCS-433LS4
3 - MEMORIZATION2 - CODING4 - BATTERY ACCESS5 - TROUBLESHOOTINGFAULT SOLUTIONThe transmitter led blinksCheck the receiver supply.Replace the transmitter batteryIS-TLSGXUK Rev. 1 on 20.12.2002To access the battery slide out the battery doorPlace the 23A alkaline battery between the 2 contacts.Respect the right polarity as indicated on the bottom of the box.NOTE: Please dispose of the batteries correctly, they are hazardous waste.Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number.The transmitter security code has to be stored onto the receiver or the receivers memory available. Your own installer or reseller will perform this operation during the installation or will give you the necessaries instructions during the selling. Don't forget that the still free buttons of your transmitter can be used for further wireless functions. Ask your installer the best suitable receiver. The radio emission isn’t verifiableThe transmitter led is OFF.The radio emission isn’t verifiableThe transmitter led is ON.Replace the transmitter batteryGUARANTEERCS-433LS - Type : S2TR2641E2 FCC ID : PWJ024AThis device complies with FCC Rules Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation.Part. 15 of the NoticeAny changes or modification to RCS equipment not expressly approved by RCS could void the user's authority to operate the equipment.REMOTE CONTROL SOLUTIONSCollege Park Commerce Center2042 N. Rio Grande Ave. Suite AOrlando - FL 32804U.S.A.Office: (407)-426-8687Fax: (407)-428-9309e-mail: bettertx@msn.comThe guarantee period of all RCS transmitter batteries is 6 months, beginning from the manufacturer date. During this period, if the product does not work correctly, due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity.+_23ABatteryPolarity
1A - General informationThe radiocontrol RCS-433LT has been designed for the programmable telephone entry systems, anti-burglar systems and access control systems. It has a very high security coding system. (KeeLoq ® Hopping code).The code sent by the transmitter changes at each activation, avoiding any scanning and copying risk. A special algorithm 1A - General information1B - Technical specifications1C - Main features1 - TRANSMITTER INTRODUCTION2 - CODING3 - MEMORIZATION4 - BATTERY ACCESS5 - TROUBLESHOOTINGGETTINGSTARTED1B - Technical specificationsNumber of keys: 2 / 4Supply : 1 Alkaline Battery 12V type 23ABattery life: 12 - 18 monthsCurrent consumption : 25 mAOperating frequency : 433.92 MHz64Code combinations : 2Modulation : AM / ASKRated e.r.p. : 50 - 100 mWRange in free space: 60 - 120 ydOperating temperature: -20 ÷ +55 °COverall dimensions: 3.26 x 1.88 x 0.62 inWeight: 20 gr.allows to keep synchronyzed transmitter and receiver. The operating frequency is 433,92 MHz.The receiver RCS-433R type SELWR433, which operates with this transmitter, has a Wiegand 26 bit format output, suitable with any type of access control system, equipped with this type of protocol. The 23A Alkaline battery has a life of about 18 months. The product fully complies with the European Directives 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC1C - Main featuresPush-button CRed LEDCONTENTSThank you for choosing a RCS product. You are recommended to read this manual carefully before installing the product.RCSPush-button APush-button BPush-button DBattery doorKey holder ring RCS - 433LTRCS-433LT2RCS-433LT4
3 - MEMORIZATION2 - CODING4 - BATTERY ACCESS5 - TROUBLESHOOTINGFAULT SOLUTIONThe transmitter led blinksCheck the receiver supply.Replace the transmitter batteryIS-TLTGXUK Rev. 0 on 17.07.2002To access the battery slide out the battery doorPlace the 23A alkaline battery between the 2 contacts.Respect the right polarity as indicated on the bottom of the box.NOTE: Please dispose of the batteries correctly, they are hazardous waste.Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number.The transmitter security code has to be stored onto the receiver or the receivers memory available. Your own installer or reseller will perform this operation during the installation or will give you the necessaries instructions during the selling. Don't forget that the still free buttons of your transmitter can be used for further wireless functions. Ask your installer the best suitable receiver. The radio emission isn’t verifiableThe transmitter led is OFF.The radio emission isn’t verifiableThe transmitter led is ON.Replace the transmitter batteryGUARANTEERCS-433LT - Type : S2TW2641E2 FCC ID : PWJ024AThis device complies with FCC Rules Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation.Part. 15 of the NoticeAny changes or modification to RCS equipment not expressly approved by RCS could void the user's authority to operate the equipment.REMOTE CONTROL SOLUTIONSCollege Park Commerce Center2042 N. Rio Grande Ave. Suite AOrlando - FL 32804U.S.A.Office: (407)-426-8687Fax: (407)-428-9309e-mail: bettertx@msn.comThe guarantee period of all RCS transmitter batteries is 6 months, beginning from the manufacturer date. During this period, if the product does not work correctly, due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity.+_23ABatteryPolarityOPEN

Navigation menu