CDVI WIRELESS S P A 024A TRANSMITTER MODEL ERONE 024A User Manual Instructions
CDVI WIRELESS S.P.A. TRANSMITTER MODEL ERONE 024A Instructions
Users Manual
RCS - 433LS TI ED ET RT G TA Stand alone RCS-433LS2 RCS-433LS4 RCS Thank you for choosing a RCS product. You are recommended to read this manual carefully before installing the product. CONTENTS 1 - TRANSMITTER INTRODUCTION 1A - General information 1B - Technical specifications 1C - Main features 2 - CODING 3 - MEMORIZATION 4 - BATTERY ACCESS ( gate, garage door, rolling shutters, sun-blinds, anti-burglar appliances, lighting ). All the receivers of the range RCS-433S can store into the EEPROM a serial number, a manufacturer key and a synchronism algorithm of more transmitters. Each transmitter ( or its different keys ) can be stored into different receivers and hence can do more functions. In order to use the unused keys of the transmitter it is enough to connect the dedicated receiver to the mechanism to drive ( i.e. electrolock of a pedestrian gate, a buzzer, etc. ). The product fully complies with the European Directives 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations. 1B - Technical specifications Number of keys: Supply : Battery life: Current consumption : Operating frequency : Code combinations : Modulation : Rated e.r.p. : Range in free space: Operating temperature: Overall dimensions: Weight: 1C - Main features Red LED 5 - TROUBLESHOOTING Push-button 1A - General information The radiocontrol RCS-433LS has been designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system. (KeeLoq ® Hopping code). The code sent by the transmitter changes at each activation, avoiding any scanning and copying risk. A special algorithm allows to keep synchronysed transmitter and receiver. The operating frequency is 433,92 MHz. The receiver which makes the activation, once received the transmitter code, has to be connected during the installation to the device to control 2/4 1 Alkaline Battery 12V type 23A 12 - 18 months 25 mA 433.92 MHz 264 AM / ASK 50 - 100 µW 60 - 120 yd -20 ÷ +55 °C 3.26 x 1.88 x 0.62 in 20 gr. Push-button Key holder ring Push-button Push-button Battery door 2 - CODING Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number. 3 - MEMORIZATION The transmitter security code has to be stored onto the receiver or the receivers memory available. Your own installer or reseller will perform this operation during the installation or will give you the necessaries instructions during the selling. Don't forget that the still free buttons of your transmitter can be used for further wireless functions. Ask your installer the best suitable receiver. 4 - BATTERY ACCESS To access the battery slide out the battery door Place the 23A alkaline battery between the 2 contacts. Respect the right polarity as indicated on the bottom of the box. Polarity Notice Any changes or modification to RCS equipment not expressly approved by RCS could void the user's authority to operate the equipment. GUARANTEE The guarantee period of all RCS transmitter batteries is 6 months, beginning from the manufacturer date. During this period, if the product does not work correctly, due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. 5 - TROUBLESHOOTING The radio emission isn’t verifiable The transmitter led is OFF. This device complies with Part. 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. Battery + 23A NOTE: Please dispose of the batteries correctly, they are hazardous waste. FAULT RCS-433LS - Type : S2TR2641E2 FCC ID : PWJ024A SOLUTION Replace the transmitter battery The radio emission isn’t verifiable The transmitter led is ON. Check the receiver supply. The transmitter led blinks Replace the transmitter battery REMOTE CONTROL SOLUTIONS College Park Commerce Center 2042 N. Rio Grande Ave. Suite A Orlando - FL 32804 U.S.A. Office: (407)-426-8687 Fax: (407)-428-9309 e-mail: bettertx@msn.com IS-TLSGXUK Rev. 1 on 20.12.2002 RCS - 433LT TI ED ET RT G TA RCS RCS-433LT2 RCS-433LT4 Thank you for choosing a RCS product. You are recommended to read this manual carefully before installing the product. CONTENTS 1 - TRANSMITTER INTRODUCTION 1A - General information 1B - Technical specifications 1C - Main features 2 - CODING allows to keep synchronyzed transmitter and receiver. The operating frequency is 433,92 MHz. The receiver RCS-433R type SELWR433, which operates with this transmitter, has a Wiegand 26 bit format output, suitable with any type of access control system, equipped with this type of protocol. The 23A Alkaline battery has a life of about 18 months. The product fully complies with the European Directives 99/5/CE, 89/336/CEE, 73/23/CEE and with the Part 15 of FCC 1B - Technical specifications Number of keys: Supply : Battery life: Current consumption : Operating frequency : Code combinations : Modulation : Rated e.r.p. : Range in free space: Operating temperature: Overall dimensions: Weight: 2/4 1 Alkaline Battery 12V type 23A 12 - 18 months 25 mA 433.92 MHz 264 AM / ASK 50 - 100 mW 60 - 120 yd -20 ÷ +55 °C 3.26 x 1.88 x 0.62 in 20 gr. 1C - Main features 3 - MEMORIZATION 4 - BATTERY ACCESS Red LED 5 - TROUBLESHOOTING Push-button 1A - General information The radiocontrol RCS-433LT has been designed for the programmable telephone entry systems, anti-burglar systems and access control systems. It has a very high security coding system. (KeeLoq ® Hopping code). The code sent by the transmitter changes at each activation, avoiding any scanning and copying risk. A special algorithm Push-button Key holder ring Push-button Push-button Battery door 2 - CODING Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number. 3 - MEMORIZATION The transmitter security code has to be stored onto the receiver or the receivers memory available. Your own installer or reseller will perform this operation during the installation or will give you the necessaries instructions during the selling. Don't forget that the still free buttons of your transmitter can be used for further wireless functions. Ask your installer the best suitable receiver. 4 - BATTERY ACCESS To access the battery slide out the battery door Place the 23A alkaline battery between the 2 contacts. Respect the right polarity as indicated on the bottom of the box. Polarity OPEN Notice Any changes or modification to RCS equipment not expressly approved by RCS could void the user's authority to operate the equipment. GUARANTEE The guarantee period of all RCS transmitter batteries is 6 months, beginning from the manufacturer date. During this period, if the product does not work correctly, due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. 5 - TROUBLESHOOTING The radio emission isn’t verifiable The transmitter led is OFF. This device complies with Part. 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. Battery + 23A _ NOTE: Please dispose of the batteries correctly, they are hazardous waste. FAULT RCS-433LT - Type : S2TW2641E2 FCC ID : PWJ024A SOLUTION Replace the transmitter battery The radio emission isn’t verifiable The transmitter led is ON. Check the receiver supply. The transmitter led blinks Replace the transmitter battery REMOTE CONTROL SOLUTIONS College Park Commerce Center 2042 N. Rio Grande Ave. Suite A Orlando - FL 32804 U.S.A. Office: (407)-426-8687 Fax: (407)-428-9309 e-mail: bettertx@msn.com IS-TLTGXUK Rev. 0 on 17.07.2002
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 4 Create Date : 2002:12:23 09:55:20 Modify Date : 2002:12:23 09:55:20 Producer : Corel PDF Engine Version 10.410 Author : G. Massimo Dalle Carbonare Creator : CorelDRAW Versione 10.0 Title : InstructionsEXIF Metadata provided by EXIF.tools