COSHIP ELECTRONICS N9090 OTT STB V3 User Manual Manual COSHIP N9090C CURVAS 20170501

SHENZHEN COSHIP ELECTRONICS CO.,LTD. OTT STB V3 Manual COSHIP N9090C CURVAS 20170501

Users Manual

USER’S MANUALOTT STB V3 N9090Power on/StandbyInformationGo to Home pageFunctions depend on specific applicationsMove cursor Up/Down/Left/RightPause/Resume playingChannel switch +/-Confirm to selectionBack to previous menu or exit from operationVolume adjust +/-Display EPGREMOTE CONTROLNote: The keys mentioned in the manual refer to RCU keys except for special explanations.Please operate according to key instructions on screen.Trouble Shooting FAST INSTALLATION GUIDEDISPLAY on front panel is offPower adapter is disconnected. Make sure power adapter is plugged into a proper power socket.No sound and no pictureThe receiver is in standby mode. Press key to switch it to operation mode.No sound1. Audio cable is disconnected or incorrectly connected. Connect audio cable correctly.2. The receiver is in mute mode. Press key to restore sound.3. Volume is set to minimum. Increase volume to a proper level.No pictureVideo cable is disconnected or incorrectly connected. Connect video cable correctly.RCU doesn’t work1. No enough power in batteries. Replace the batteries.2. RCU is not aimed at the receiver. Aim RCU at the receiver.Program cannot be played1. Please check and make sure the network connection is normal.2. Please make sure the program is authorized.Please refer to following figure and instructions to connect Ethernet, TV and other devicesTV set and STB are connected the HDMI cable (Included). If the TV hasn’t HDMI input you can connect the analogue cable (3 in 1, Optional).Connect the STB to the power adapter in accessories.Turn on the TVSelect the correct input source (HDMI input or analogue input) that corresponding output of the STB by TV remote control.Turn on the STB follow the instructions to enjoy the LEBARA video service.Set up the connection of the STB to the modem, either throughWi-Fi or Ethernet cable.123456Note: To ensure a better service, recommending to set up the connection through the Ethernet cable.12ResolutionSpecificationsInput VoltagePower adapterOutput VoltageOutput CurrentPower Consumption1080p/1080i/720p/480i/480p 100-240V~ 50/60Hz1.5A7.5W maxSize Physical CharacteristicsWeight 100mmX100mmX23mm255g Wi-Fi module Wireless connectivity:IEEE 802.11a/b/g/n compliant, Operating Temperature -10°C~+40°CStorage Temperature -40°C~+60°C Storage Humidity ≤93%Hereby, Shenzhen Coship Electronics Co., Ltd declares that the radio equipment type N9090 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.coship.comOutput power: <15dBm@11a, < 18dBm@11b,< 17dBm@11g, < 17dBm@11n.support 20MHz,40MHz bandwidth bandwidth in 2.4GHz.in 5GHz, and 20MHz,40MHz 5V N9090
Read following items carefully before operating this receiver.Good ventilation (leave space not less than 10cm around this receiver)Installation:No heat source (burning candle, radiator, heater, fireplace, amplifier, etc)Suitable temperatureAgainst humidity (especially bathroom, kitchen, etc )No direct sunlightLow vibrationDo not cover vents of this receiver with newspaper, table cloth, curtain, etc.Precautions:Don’t put heavy objects on this receiver. Do not let liquid and spray flow into this device to avoid serious damagePower socket should be available near the receiver and well grounded.Power Socket and Power AdapterDo not insert or pull out power adapter with wet hands to avoid electric shock or fire.Do not use damaged power adapter, which must be replaced to avoid risk of fire or electric shock.Only use accessories specified by the manufacturer, as other unsupported accessories may cause damage to the receiver.AccessoryDon’t unplug or insert audio and video cables when this receiver is on.MaintenanceUnplug this receiver from power socket before changing connections between this unit and other related equipment. To avoid the risk of lightning strike, unplug power adapter of the receiver from power socket in lightning storm.Unplug power adapter from power socket when the unit is not used for a long time or damaged accidentally.Turn off this unit first, after 1 to 2 hours turn it on when move thisTo avoid the risk of fire or electric shock, don’t expose this receiver to rain, splashing and don’t put object with liquid on this unit.Unplug power adapter of this receiver from power socket before cleaning. Chipset: 28nm, 1.5G Cortex-A7 Quad core with NeonMain FeaturesHEVC (H.265) / H.264 / MPEG-4 1080P/30p HW decoderHD+HD simultaneous video stream HW decodeMaili450 MP4 Quad coreOpenGL ES 1.1/2.0 3D graphic accelerator capableOpenVG1.1 vector graphics acceleratorOS: Android 4.4 KitKatFlash: 4GB eMMC flashMemory: 1GB DDR3Wi-Fi: 2.4G/5G Dual band (802.11a/b/g/n,Antena 2X2)HDMI 1.4 with HDCP 1.4, support HDMI CEC, Support 3D video formatDRM: Encrypted HLSBatteries should be installed in accordance with the polarity markings (+/-) on battery compartment.RCU BatteryReplace batteries if there is no enough power and dispose battery waste properly for environmental protectionRemove batteries if RCU is not used for a long time.Install the receiver in a place with:The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modificationscould void the user’s authority to operate the equipment.RF Exposure Information and Statement NOTE:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for helpThis device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.This equipment complies with FCC/IC radiation exposure limits setRadiation Exposure StatementThis device is restricted to indoor use where operated in the European This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreceiver from a cold environment to a hot environment or vice versa.Community using frequency in 5150MHz ~ 5350MHz to reduce the potential for interferenceand, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. reception, which can be determined by turning the equipment off and more of the following measures:on, the user is encouraged to try to correct the interference by one or forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. est susceptible d'en compromettre le fonctionnement. accepter tout brouillage radioélectrique subi, même si le brouillage pas produire de brouillage, et (2) l'utilisateur de l'appareil doit est autorisée aux deux conditions suivantes : (1) l'appareil ne doit applicables aux appareils radio exempts de licence. L'exploitation Le présent appareil est conforme aux CNR d'Industrie Canada must accept any interference received, including interference that (1) this device may not cause harmful interference,and (2) this device Industry Canada. Operation is subject to the following two conditions: may cause undesired operation.This device complies with part 15 of the FCC rules and RSS-247of

Navigation menu