COSHIP ELECTRONICS N9090 OTT STB V3 User Manual Manual COSHIP N9090C CURVAS 20170501

Download:
Mirror Download [FCC.gov]
Document ID	3400042
Application ID	LCSmLr6CAC7HB2AFjtOgsQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	152.7kB (1908752 bits)
Date Submitted	2017-05-23 00:00:00
Date Available	2017-05-24 00:00:00
Creation Date	2017-05-02 17:48:40
Producing Software	Corel PDF Engine Version 17.4.0.887
Document Lastmod	2017-05-19 17:26:45
Document Title	Manual COSHIP (N9090C) CURVAS-20170501.cdr
Document Creator	CorelDRAW X7
Document Author:	刘红林

REMOTE CONTROL
Specifications
Information
Power on/Standby
Confirm to selection
Back to previous menu
or exit from operation
Go to Home page
Move cursor
Up/Down/Left/Right
Pause/Resume playing
Display EPG
Volume adjust +/-
Channel switch +/-
Functions depend on
specific applications
Note: The keys mentioned in the manual refer to RCU keys except for special explanations.
Please operate according to key instructions on screen.
Resolution
1080p/1080i/720p/480i/480p
Power adapter
Input Voltage
Output Voltage
Output Current
Power Consumption
100-240V~ 50/60Hz
5V
1.5A
7.5W max
Physical Characteristics
Size
Weight
Operating Temperature
Storage Temperature
Storage Humidity
100mmX100mmX23mm
255g
-10°C~+40°C
-40°C~+60°C
≤93%
FAST INSTALLATION GUIDE
DISPLAY on front panel is off
Please refer to following figure and instructions to connect
Ethernet, TV and other devices
Power adapter is disconnected. Make sure power adapter is plugged
into a proper power socket.
TV set and STB are connected the HDMI cable (Included).
If the TV hasn’t HDMI input you can connect the analogue
cable (3 in 1, Optional).
The receiver is in standby mode. Press key to switch it to operation
mode.
Connect the STB to the power adapter in accessories.
No sound
Turn on the TV
Select the correct input source (HDMI input or analogue input)
that corresponding output of the STB by TV remote control.
Turn on the STB follow the instructions to enjoy the LEBARA
video service.
Set up the connection of the STB to the modem, either through
Wi-Fi or Ethernet cable.
No sound and no picture
1. Audio cable is disconnected or incorrectly connected. Connect
audio cable correctly.
2. The receiver is in mute mode. Press key to restore sound.
3. Volume is set to minimum. Increase volume to a proper level.
No picture
Wireless connectivity:
Wi-Fi module
Output power:
IEEE 802.11a/b/g/n compliant,
support 20MHz,40MHz bandwidth
in 5GHz, and 20MHz,40MHz
bandwidth in 2.4GHz.
<
15dBm@11a, < 18dBm@11b,
< 17dBm@11g, < 17dBm@11n.
Hereby, Shenzhen Coship Electronics Co., Ltd declares that the radio equipment type
N9090 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.coship.com
N9090
Trouble Shooting
Video cable is disconnected or incorrectly connected. Connect video
cable correctly.
RCU doesn’t work
1. No enough power in batteries. Replace the batteries.
2. RCU is not aimed at the receiver. Aim RCU at the receiver.
Program cannot be played
1. Please check and make sure the network connection is normal.
2. Please make sure the program is authorized.
Note: To ensure a better service, recommending to set up the connection
through the Ethernet cable.
USER’S MANUAL
OTT STB V3 N9090
Read following items carefully before operating this receiver.
RCU Battery
Accessory
RF Exposure Information and Statement
Installation:
Batteries should be installed in accordance with the polarity markings
(+/-) on battery compartment.
Remove batteries if RCU is not used for a long time.
Replace batteries if there is no enough power and dispose battery
waste properly for environmental protection
Only use accessories specified by the manufacturer, as other
unsupported accessories may cause damage to the receiver.
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modificationscould void the user’s authority to operate the equipment.
Install the receiver in a place with:
Good ventilation (leave space not less than 10cm around this receiver)
No heat source
(burning candle, radiator, heater, fireplace, amplifier, etc)
Suitable temperature
Against humidity (especially bathroom, kitchen, etc )
No direct sunlight
Low vibration
Precautions:
Do not cover vents of this receiver with newspaper, table cloth, curtain,
etc.
Don’t put heavy objects on this receiver.
Do not let liquid and spray flow into this device to avoid serious damage
Power Socket and Power Adapter
Power socket should be available near the receiver and well grounded.
Do not insert or pull out power adapter with wet hands to avoid electric
shock or fire.
Do not use damaged power adapter, which must be replaced to avoid
risk of fire or electric shock.
Main Features
Chipset: 28nm, 1.5G Cortex-A7 Quad core with Neon
Maintenance
HEVC (H.265) / H.264 / MPEG-4 1080P/30p HW decoder
Don’t unplug or insert audio and video cables when this receiver is on.
Unplug this receiver from power socket before changing connections
between this unit and other related equipment.
To avoid the risk of lightning strike, unplug power adapter of the
receiver from power socket in lightning storm.
This device is restricted to indoor use where operated in the European
Community using frequency in 5150MHz ~ 5350MHz to reduce the
potential for interference
Unplug power adapter from power socket when the unit is not used for
a long time or damaged accidentally.
Turn off this unit first, after 1 to 2 hours turn it on when move this
receiver from a cold environment to a hot environment or vice versa.
To avoid the risk of fire or electric shock, don’t expose this receiver to
rain, splashing and don’t put object with liquid on this unit.
Unplug power adapter of this receiver from power socket before
cleaning.
HD+HD simultaneous video stream HW decode
Maili450 MP4 Quad core
OpenGL ES 1.1/2.0 3D graphic accelerator capable
OpenVG1.1 vector graphics accelerator
OS: Android 4.4 KitKat
Flash: 4GB eMMC flash
Memory: 1GB DDR3
Wi-Fi: 2.4G/5G Dual band (802.11a/b/g/n,Antena 2X2)
HDMI 1.4 with HDCP 1.4, support HDMI CEC, Support 3D video format
DRM: Encrypted HLS
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device and its antenna(s) must not be co-located or operating
in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC rules and RSS-247of
Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Radiation Exposure Statement
This equipment complies with FCC/IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 刘红林
Title                           : Manual COSHIP (N9090C) CURVAS-20170501.cdr
Create Date                     : 2017:05:02 17:48:40+08:00
Creator Tool                    : CorelDRAW X7
Modify Date                     : 2017:05:19 17:26:45+08:00
Metadata Date                   : 2017:05:19 17:26:45+08:00
Producer                        : Corel PDF Engine Version 17.4.0.887
Document ID                     : uuid:279a2006-ad01-4cac-9dac-68b2838490f6
Instance ID                     : uuid:3b14f65b-2aa6-401a-94a5-89b5895d9adb
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 2
Author                          : 刘红林

EXIF Metadata provided by EXIF.tools