CUB ELECPARTS VS60U029 Sensor AID DUO TPMS TOOL User Manual
CUB ELECPARTS INC Sensor AID DUO TPMS TOOL
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4200283 |
| Application ID | tIW148wc2r/XBLJ3dYXeWw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 196.61kB (2457671 bits) |
| Date Submitted | 2019-03-14 00:00:00 |
| Date Available | 2019-03-14 00:00:00 |
| Creation Date | 2019-02-20 11:45:49 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2019-02-20 11:45:49 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | Steven Lin |
CUB SENSOR AID DUO TPMS TOOL For VS-60U024 / VS-60U029 Series Brand Name : Cub Model Name : VS60U029 Product Name : Sensor AID DUO TPMS TOOL Table of contents Specification Part list 1. Sensor AID DUO TPMS TOOL Introduction………………………. 1.1 Appearance 1.2 Keypad Summary 2. Function……………………………………………………………….......…. 2.1 MAKER SELECTION 2.1.1 DIAGNOSE 2.1.2 PROGRAMMING 2.1.3 CHECK UNI-SENSOR 2.1.4 RELEARN INFO 2.1.5 OBD II OPTIONS 2.1.6 TREAD DEPTH 2.2 LAST VEHICLE 2.3 SETTINGS 2.4 UPDATE 2.5 SAVED VEHICLES 2.6 TOOL INFORMATION 3. Warranty……………………………………………………………………… 14 14 17 20 20 21 Specification: Item Operating Frequency Power Input / Current Operating Current Operating Temperature Storage temperature Operating Humidity Storage Humidity Size(rubber) Weight Specification 125kHz,2.4Ghz 5V/2A 380 mA(Max 600 mA) 0 ~ 40 ℃ (32 - 104℉) -20 ~ 60 ℃ (-4 - 140℉) 20-90% 20-90% 210*102*62mm 630g 5% ( 60U029 series) 610g 5% ( 60U024 series) Part List NO Item Q’ty Sensor Aid TOOL OBD II cable Charger ( 5V/2A) Mirco usb cable Magnet User manual BT OBD II 1. Sensor AID DUO TPMS TOOL Introduction Sensor AID DUO TPMS TOOL, henceforth called Sensor AID DUO, is designed to promote CUB Uni-Sensor in the whole world. Sensor AID DUO TOOL can diagnose and interact with tire pressure sensor through wireless (radio frequency) communication to: • Retrieve data from tire pressure sensor • Verify the identity of each tire pressure sensor mounted on the wheels. • Assist technicians in servicing CUB Uni-Sensor during relearn procedures. NOTE: Sensor shall be diagnosed close to left or right antenna. 1.1 Appearance 1.2 Keypad Summary Power On / Off Navigate through measured and parameters by pressing keys OK key, press it to validate or process function. Home key, Back to main menu Esc key, press it to return to the previous menu without parameter validation Tread Depth mechanism. This function is for the 60U029 series. Indicator will turn red when battery is low Indicator will turn orange when charging The Micro-USB connection For charging (5V/2A) / IDtoPC / updating RJ11 cable. Function pending LED for Camera AF Camera 2. Function Press and hold the power key for 3 seconds to power on the device During power on, The device display the CUB logo Now the device is at the MAIN MENU 2.1 MAKER SELECTION NOTE: Definition OK key : Select / Validate / Process Arrow Key : Use arrow keys to browse maker. MAIN MENU: Use the arrow key to browse function, press the “OK” key to select YEAR selection: Use the arrow key to browse model, press the “OK” key to select. MAKER selection: Use the arrow key to browse automakers, press the “OK” key to select FUNCTION selection. Press the “OK” key to select DIAGNOSE function. 2.1.1 DIAGNOSE Press “OK” key to enter. 2.1.1.1 Diagnose SINGLE SENSOR MODEL selection: Use the arrow key to browse model, press the “OK” key to select. Use the arrow key to select diagnose “SINGLE SENSOR” or “MULTIPLE SENSORS” and press the “OK” key to select. NOTE Sensor AID will now activate the sensor. Sensor response time may vary depending on sensor type and brand. Sensor AID will sound after receiving sensor information. The picture above is an example of sensor data communication result The Sensor AID will identify the sensor information that is transmitted. Not all sensors transmit every piece of information shown. 2.1.1.2 Diagnose MULTIPLE SENSORS Use the arrow key to browse MULTIPLE SENSORS, press the “OK” key to select. Press “OK” key to diagnose. After retrieving data from sensor, the indicator light will automatically move to next wheel. Press “OK” key to diagnose. Use the same procedure for the other wheels. The picture below is an example of sensor data communication result DIAGNOSE: To diagnose sensor information. PROGRAMMING : a shortcut to the Programming menu. (See page 6). TREAD DEPTH: To process TREAD DEPTH function (See page xxx). SAVE: To save the existing data to SAVED VEHICLES menu (will be enabled when there is existing data, see page XX). 2.1.2 PROGRAMMING See step 2.1.1, then use arrow key to browse. Press “OK” key to enter. 2.1.2.1 NEW SENSOR Select New Sensor. Press “OK” key to enter. Press “OK” key to program. Use the arrow key to browse WIRELESS (as example). Press “OK” key to program. HINT: IN CRADLE: Indicates programming by wire (Uni-Sensor must be placed inside cradle). WIRELESS: Indicates programming by wireless (Wireless Uni-Sensor must be within programming range from the tool) NOTE: Make sure there are no other Wireless Uni-Sensors within 1 m from the tool when you use wireless programming ; otherwise, the programming will fail. Program blank sensor. When selected and pressing the “OK” key, it will automatically program the next Uni-Sensor in the same way (in cradle/wireless) as previously selected. DEL ALL: Delete all the existing data of all the previously programmed Uni-Sensors. 2.1.2.2 AUTO DUPLICATE See step 2.1.2, then use arrow key to browse. Press “OK” key to enter. An instruction message will be displayed during 4 seconds, then will automatically disappear DIAGNOSE: If there is no existing data, diagnose all sensors that you wish to duplicate at the beginning DUPLICATE: Will be enabled when at least one sensor is diagnosed. Select it and press “OK” to duplicated all previously diagnosed sensor. PROGRAMMING: a shortcut to the Programming menu. SAVE: To save the existing data to SAVED VEHICLES menu (will be enabled when there is existing data, see page XX). 2.1.2.3 MANUALLY DUPLICATE See step 2.1.2, then use arrow key to browse. Press “OK” key to enter. Use the arrow keys to browse. Press “OK” key at each character to enter the ID, then select Duplicate and press “OK” key. Please check if O.E sensor ID is Hexadecimal (0~9+A~F) or Decimal (0~9) to select correct mode in Manual Duplicate. NOTE Duplicate and Programming functions will only work with CUB’s Sensor-AID and Uni-sensor. Duplicate: To duplicate a manual ID to a Uni-Sensor (will be enabled after keying in first character). HEX to DEC: To change between HEX and DEC ID formats (enabled at the beginning, becomes disabled once first character is keyed in). ID VIEW: To see the ID location on the OE sensor. 2.1.2.4 ID MODIFY See step 2.1.2, then use arrow key to browse. Press “OK” key to enter. 2.1.2.4.1 SENSOR ID COPY Press “OK” key to enter. Function immediately starts scanning for a source sensor whose ID will be copied. After source ID is detected, press “OK” key to copy ID into target sensor. 2.1.2.4.2 MANUAL ID MODIFY Press “OK” key to enter. Function immediately starts scanning for a source sensor whose ID will be copied. After source ID is detected, key in new ID by means of the keyboard, then select Modify and press “OK” key. 2.1.2.5 L <-> R See step 2.1.2, then use arrow key to browse. Press “OK” key to enter. Function immediately starts scanning for a source sensor whose side will be changed. Once source ID is detected, select side to program to The above message confirms the successful side programming. If a Wireless Sensor is detected, the message above is displayed. Press “ESC” key to go back. 2.1.2.6 BACK TO MAKER MENU See step 2.1.2, then use arrow key to browse. Press “OK” key to enter. 2.1.3 CHECK UNI-SENSOR 10 Back to MAKER SELECTION Function immediately starts scanning for a Uni-Sensor. See step 2.1.1 then use arrow key to browse. Press “OK” key to enter. 2.1.4 RELEARN INFO. See step 2.1.1 then use arrow key to browse. Press “OK” key to enter. Once detected, the screen above is displayed. Press “OK” key to scan the next sensor, or “ESC” to go back Use up and down arrow keys to scroll. 2.1.5 OBD II OPTIONS See step 2.1.1 then use arrow key to browse. Press “OK” key to enter. (BT disconnect) (BT connecting) Note: When you exit OBDII OPTION and back to OBDII OPTION immediately, it will cost 5-10 second to re-connect. 11 2.1.5.1 READ ID Press “OK” key to enter. Press “OK” key to enter. 2.1.5.2 WRITE ID Press “OK” key to enter. Press “OK” key to enter. 2.1.5.3 UNLOCK ECU for some certain vehicles( Toyota ) 12 2.1.5.4 CLEAR DTC 2.1.5.5 BACK Back to MAKER SELECTION 2.1.6 TREAD DEPTH Alarm: Do not use the Tread Depth function on anyone’s eyes, which can cause visual impairment. See step 2.1.1 then use arrow key to browse. Press “OK” key to enter. Place tool with tread depth device in line with tread, then press “OK” key at each location (inner, middle & outer) for each tire. You may retake a measurement at any position by simply selecting it in the matrix, then pressing “OK” key. SAVE (Will enable when there is existing data.) 2.2 LAST VEHICLE 13 This function is the shortcut to the last picked MMY. Select it and the MMY will be displayed above the icon. Press “OK” key to enter its function menu. ( LEXUS CT 06/2014-12/2016) 2.3 SETTINGS See step 2.1,then use arrow key to browse. Press “OK” key to enter. 2.3.1 PRESSURE UNIT Press the “OK” key to select. Use the arrow keys to browse units, press the “OK” key to select. 2.3.2 TEMPERATURE UNIT Press the “OK” key to select. 14 Use the arrow keys to browse units, press the “OK” key to select. 2.3.3 ID FORMAT Press the “OK” key to select. Use the arrow keys to browse formats, press the “OK” key to select. 2.3.4 AUTO OFF Press the “OK” key to select. Use the arrow keys to browse options, press the “OK” key to select. 2.3.5 LANGUAGE Press the “OK” key to select. Use the arrow keys to browse languages, press the “OK” key to select. 2.3.6 REGION Press the “OK” key to select. 15 Use the arrow keys to browse regions, press the “OK” key to select. 2.3.7 MUTE Pressthe the “OK” “OK” key Press keytoto select. select. Use the arrow keys to browse options, press the “OK” key to select. 2.3.8 VOLUME Press the “OK” key to select. Use the arrow keys to browse volume levels, press the “OK” key to select. 2.3.9 BACKLIGHT Press the “OK” key to select. Use the arrow keys to browse backlight levels, press the “OK” key to select. 2.3.10 DAY-TIME 16 Press the “OK” key to select. Use the arrow keys to adjust date and time, then press “OK” to set. 2.3.11 BT OBD II PAIRING Connect the Cub BLE OBD II Module to the OBD port of the vehicle, then turn ACC on. In the Sensor AID, under Settings, select OBD II pairing and then press “OK” key to select The pairing process begins immediately; it may take several seconds. Wait for the process to complete. Once the paring is completed, the above message is displayed. 2.4 UPDATE Update tool by PC software. Update BT OBD II Moudle. (Make sure BT Moudle is plug on a vehicle.) 17 2.4.1 WIRE UPDATE by PC software 1. Enter 2.Extract the file [Cub] TPMS Tool & OBD-II Module Update Platform v1.7 (beta2)(lite).zip 3.Execute Cub Updater.exe 4. Connect Mico usb to TOOL and PC usb port. Appear connect 5. Click “Download” for auto update 5.1 SN is invalid. You will see the error message “ Serial number “0000F0F10F00” cannot be found”. Please contact your distributor/dealer. 18 5.2 SN is valid. Download file from server Transmit file to tool Transmit completed. Disconnect usb cable. Wait for tool update. 2.4.2 BT OBD II module UPDATE Note: Before you do the OBDII update, please plug OBD II module into an OBD II connector of any vehicle in order to have the power source for the OBDII module. Update Mode 19 Cub_BT_OBDII Reboot OBDII is updating Update Complete 2.5 SAVED VEHICLES DEL ALL DEL OLDEST See step 2.1, then use arrow key to browse. Press “OK” key to enter. DEL SELECTED Use arrow keys to select saved vehicle, press “OK” key to enter. There are three options underneath: DEL ALL – Deletes all data DEL OLDEST – Deletes oldest saved vehicle only DEL SELECTED – Deletes selected saved vehicle only 2.6 TOOL INFORMATION See step 2.1,then use arrow key to browse. Press “OK” key to enter. 20 Tool information is displayed: OS – Operating Sytem H/W – Hardware F/W – Firmware MAC ADDRESS 3. Warranty CUB autoparts products are guaranteed from material defects for 365 days after the date of purchase. lf the product fails under normal circumstances within the first year, CUB autoparts will repair or replace the product. Product will not be replaced or repaired if damaged from misuse or incorrect application. To obtain repair or replacement of the product under warranty, contact local distributor. Proof of purchase and date of purchase is required to validate the warranty claim. CUB autoparts is not liable for any direct or consequential loss or property damage arising from use of product. NOTE Warranty does not cover tire valves or screws for tire valves. The tire valves and screws need to be replaced when rotating tires, changing tires or changing the TPMS sensors. If installing / reinstalling a TPMS sensor, new valves and screws should be used. Warning: Only use Cub autoparts replacement parts. Using other brands will not allow the system to work and will void the warranty. Caution Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless use is prohibited or when it may cause interference or danger. SWITCH OFF NEAR BLASTING Fellow any restrictions, Do not use the device where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily. WATER·RESISTANCE The device is not water-resistant. Keep it dry. ENHANCEMENTS AND SATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. The battery needs to be charged to full for the first usage. SWITCH OFF WHEN REFUELLING 21 Do not use the device at a refueling point. Do not use near fuel or chemicals. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. QUALIFIED SERVICE Only qualified personnel may install or repair this device. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. FCC Statement This equipment has been tested and found to comply with the Iimits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These Iimits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • lncrease the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IC Statement The requirement is specified in RSS-GEN Section 5.3. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CE Compliance Notice All CE marked HERTH+BUSS sensor products are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformance will be provided upon request. 22 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. SAR FCC RF Radiation Exposure Statement: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. 23 Canada, Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de classe B est conforme à la norme NMB-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. SAR IC RF Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Déclaration d'exposition aux radiations:Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. CUB ELECPARTS INC No.6, Lane 546, Sec. 6, Chang Lu Rd., Fuhsin Hsiang,Chang Hua County, Taiwan http://www.cubautoparts.com To obtain repair or replacement of the product under warranty, or general inquiries, assistance, please refer to CUB information card to contact our local distributor. 24
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 25 Language : zh-TW Tagged PDF : Yes Author : Steven Lin Creator : Microsoft® Word 2013 Create Date : 2019:02:20 11:45:49+08:00 Modify Date : 2019:02:20 11:45:49+08:00 Producer : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools