Cadi Scientific SMB800 SmartBRIDGE User Manual

Cadi Scientific Pte. Ltd. SmartBRIDGE

Contents

manual2

SMB-800
Instruction Manual
WARNINGS
For customer in the U.S.A and Canada
• You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
• This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that
may cause undesired operation of the device.
• This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
• The lithium battery inside this product contains Perchlorate. The following
statement is required by the State of California, USA:
Perchlorate Material – special handling may apply.
For customer in Europe
• This equipment has been tested and found to comply with the limits set out
in the R&TTE Directive.
• Where you see this symbol on any of our electrical products/packaging in
Europe, it means that at end of life the product/battery must be disposed of
in accordance with any applicable laws or requirements for the separate
disposal of electrical equipment/batteries.
• The manufacturer of this product is CADI Scientific Pte Ltd, 31 Ubi Road 1,
#03-00 Aztech Building, Singapore 408694.
PRECAUTIONS
• Keep batteries away from children.
• Do not swallow batteries.
• Do not throw batteries into water.
• Do not throw batteries into fire.
• Do not short-circuit batteries.
• Do not recharge batteries.
USAGE
Please refer to the Operating Manual for the details on the use of this product.
SPECIFICATIONS
Power 100 - 240 V AC, 50/60 Hz
Power consumption Max 40VA
External dimensions
(excluding maximum
projecting
part)
170 x 280 x 40 mm
Mass Approx. 1.2 kg (2.6 lb)
Operating temperature 20°C - 50°C (68°F - 122°F)
Inputs/outputs DC connector x1
DB9F x4
Supplied accessories DC adapter x1
AC cable x1
DB9 cable x1
Instruction manual x1
Transmission frequency 868.4 MHz (For customer in Europe)
919.8 MHz (For customer in U.S.A)
925.0 MHz (For customer in U.S.A)
2.4 Ghz (For customer in Europe and U.S.A)

Navigation menu