Cambridge Silicon Radio CNS12015 Bluetooth Low Energy Retail Tag User Manual Retail Tag Instructions

Cambridge Silicon Radio Ltd Bluetooth Low Energy Retail Tag Retail Tag Instructions

Contents

user guide

Proximity Beacon Instructions
Page 1 of 2
© Cambridge Silicon Radio Limited 2013 CS-00000-RPPA
This material is subject to CSR’s non-disclosure agreement www.csr.com
CSR Retail Tag Instructions Manual
Introduction
The CSR CNS12015 Proximity Beacon is a standalone device, designed to be maintenance free, there
are no user serviceable parts in the device. The CSR beacon uses the ISM band of 2.4GHz to 2.5HZ to
operate, uses extremely low power, the power output will be no more than 0dBm, which enables
the battery life to be extended. This model is designed to operate using 2 AA alkaline batteries. The
typical battery life for the device is greater than 3 years.
The beacon is design to be positioned on or near to a location or object (e.g. a shelf in a store). The
Beacons sole function is to transmit a pre-set unique number, which will allow a simple application
loaded onto a smart phone to link to a website or backend service which would provide content,
URL, action and / or information about an associated location.
The BLE Proximity Beacon can be positioned on the shelf or under it, it can be positioned near to a
location or tied to an object using magnets, bolts or a simple cable tie.
The Beacon is shipped with its batteries installed; simply pull the pull tab to activate the beacon.
The unit is now operating and the installer or developer can now program the beacon using the CSR
Field Service Application (FSA). Once the beacon is programmed the developer or installer is able to
associate actions and or content with this beacon using the CSR web APIs to manage the beacon.
End-Users with applications that use CSR’s client may now detect the CSR beacon and the app will
receive instruction on how to react.
Regulatory Notices
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's
authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le onctionnement.
Les changements ou modifications non expressément approuvés par la partie responsable de la
conformité
pourraient annuler l'autorité de l'utilisateur à utiliser l'équipement.
Proximity Beacon Instructions
Page 2 of 2
© Cambridge Silicon Radio Limited 2013 CS-00000-RPPA
This material is subject to CSR’s non-disclosure agreement www.csr.com
CSR Retail Tag Instructions Manual
Contacts
General information www.csr.com
Information on this product sales@csr.com
Customer support for this product www.csrsupport.com
More detail on compliance and standards product.compliance@csr.com
Help with this document comments@csr.com
Trademarks, Patents and Licences
Unless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned
by CSR plc and/or its affiliates.
Other products, services and names used in this document may have been trademarked by their
respective owners.
The publication of this information does not imply that any licence is granted under any patent or
other rights owned by CSR plc or its affiliates.
CSR reserves the right to make technical changes to its products as part of its development
programme.
While every care has been taken to ensure the accuracy of the contents of this document, CSR
cannot accept responsibility for any errors.
Life Support Policy and Use in Safety-critical Compliance
CSR’s products are not authorised for use in life-support or safety-critical applications. Use in such
applications is done at the sole discretion of the customer. CSR will not warrant the use of its devices
in such applications.
Performance and Conformance
Refer to www.csrsupport.com for compliance and conformance to standards information.

Navigation menu