Canon CH91108 802.11b/g WLAN Module User Manual

Canon Inc 802.11b/g WLAN Module

User Manual

Wireless File Transmitter
WFT-E2
WFT-E2A
E
INSTRUCTION MANUAL
This product is offered in two versions, WFT-E2 and WFT-E2A. Each version operates on a
different number of wireless LAN channels. The WFT-E2 can transmit on 13 channels, and the
WFT-E2A, on 11 channels. This difference in the number of channels available is due to
varying radio regulations in areas of use.
In other respects, the WFT-E2 and WFT-E2A are identical. They are operated in the same
way. This instruction manual describes operation using the WFT-E2 as an example.
2
Thank you for purchasing a Canon product.
The Wireless File Transmitter WFT-E2 is an accessory for EOS-1D Mark III cameras
(supporting wireless and wired LAN functions and equipped with a USB port). It enables the
following operations. The WFT-E2 is compatible with IEEE 802.11b and IEEE 802.11g wireless
LANs as well as 100 Base-TX Ethernet wired LANs.
Wireless and Wired LAN Functions
Functions When Connected via USB
FTP
PTP
External Media GPS
HTTP
Transfer images to an FTP server
Use a web browser to capture, view,
and download images remotely
Use EOS Utility to capture, view, and
download images remotely
Record, backup, or copy images onto external
media
Add information regarding the latitude,
longitude, altitude, and date and time of
shooting to images
3
Introduction
These instructions should be followed only after your wireless or wired LAN and FTP server
settings are complete. For details on configuring these settings, refer to the documentation
provided with the respective equipment.
Camera menu screens depicted in this manual are generally those of the EOS-1D Mark III.
Terms in brackets [ ] indicate button or icon names or other software elements. Brackets
also denote camera menu items.
Page numbers in parentheses indicate where you can find additional information.
Instructions on camera operations should be followed only after you have read the Camera
Instruction Manual and are familiar with operating the camera.
Sections of this manual labeled with the following symbols contain information of the
corresponding nature.
: Warnings to avoid potential problems are labeled with a caution symbol.
: Supplemental information is labeled with a note symbol.
Conventions Used in this Manual
Windows is a trademark or registered trademark of Microsoft Corporation in the United
States and other countries.
Macintosh is a registered trademark of Apple Corporation in the United States and other
countries.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi
Alliance.
UPnP is a trademark of the UPnP Implementers Corporation.
All other corporate and brand names in this manual are trademarks or registered
trademarks of their respective owners.
Using the transmitter for remote image transfer, capture, or viewing requires adequate knowledge of
configuring your wireless or wired LAN and FTP server.
Canon cannot provide support for configuring wireless or wired LANs or FTP servers.
Note that Canon cannot be held liable for any loss or damage to the transmitter from erroneous network
or FTP server settings. In addition, Canon cannot be held liable for any other loss or damage caused by
use of the transmitter.
4
Introduction
Conventions Used in this Manual ...................................................................................................... 3
Areas of Use and Restrictions ........................................................................................................... 6
Safety Warnings................................................................................................................................. 7
Nomenclature..................................................................................................................................... 8
Attaching to the Camera .................................................................................................................... 9
Subsequent Organization of This Manual........................................................................................ 10
1Basic Network Settings 11
Displaying the Connection Wizard ................................................................................................... 12
Following the Connection Wizard .................................................................................................... 13
2FTP Settings and Image Transfer 19
Configuring FTP Transfer Settings .................................................................................................. 20
Automatic Image Transfer After Each Shot ..................................................................................... 22
Transferring Images Individually ...................................................................................................... 24
Batch Transfer ................................................................................................................................. 26
Checking Image Transfer History .................................................................................................... 31
Viewing Transferred Images ............................................................................................................ 32
3PTP Settings and Remote Capture 33
Configuring PTP Transfer Settings .................................................................................................. 34
Using EOS Utility ............................................................................................................................. 37
4HTTP Settings and Remote Capture 39
Configuring HTTP Transfer Settings................................................................................................ 40
Displaying WFT Server .................................................................................................................... 42
Shooting Remotely........................................................................................................................... 43
Viewing Images................................................................................................................................ 45
5Managing Settings Information 47
Checking Settings ............................................................................................................................ 48
Changing Settings............................................................................................................................ 49
Saving and Loading Settings ........................................................................................................... 51
6Using External Media 53
Connecting External Media.............................................................................................................. 54
Choosing Recording Media When Shooting .................................................................................... 57
Copying Images ............................................................................................................................... 59
Backing Up on External Media......................................................................................................... 60
Contents
1
2
3
4
5
6
7
8
9
5
7Using GPS Devices 65
Connecting GPS Devices ................................................................................................................ 66
8Troubleshooting 69
Responding to Error Messages ....................................................................................................... 70
Wireless LAN Notes......................................................................................................................... 83
Checking Network Settings.............................................................................................................. 84
9Reference 85
WFT Utility (Software)...................................................................................................................... 86
Creating and Registering Captions .................................................................................................. 88
EOS Utility System Requirements ................................................................................................... 89
Specifications................................................................................................................................... 90
Index ................................................................................................................................................ 94
Contents
6
The WFT-E2 can be used only in the following areas.
Japan, France, Italy, Germany, United Kingdom, Belgium, the Netherlands, Luxembourg,
Ireland, Denmark, Greece, Spain, Portugal, Austria, Liechtenstein, Finland, Sweden,
Poland, Hungary, Czech Republic, Slovakia, Slovenia, Estonia, Latvia, Lithuania, Cyprus,
Malta, Iceland, Norway, Switzerland, Australia, New Zealand, Singapore, Russia and China
The WFT-E2A can be used in the United States and Canada, in addition to the previous
areas.
For information on other areas where the transmitter can be used, contact the Canon
Customer Service Center.
The WFT-E2, which operates on wireless LAN frequencies for 13 channels, cannot be used
in the United States or Canada. Instead, use the WFT-E2A, which operates on wireless LAN
frequencies for 11 channels.
In France, using the transmitter outdoors is prohibited.
In Italy, use outside of one’s own premises requires general authorization.
In Latvia, use outside of one’s own premises requires an individual radio license.
The following actions may be punishable under law. Disassembling or modifying the
transmitter, or removing the certification label on it.
Do not use the transmitter near other devices that emit radio waves, such as medical
equipment or electronic devices. The transmitter may interfere with operation of these
devices.
Use the transmitter only with a compatible EOS DIGITAL camera. Using it with incompatible
cameras may cause malfunction, accidents, and other problems not covered under
warranty.
Use the transmitter as a wireless or wired LAN device as described in this instruction
manual. If you use the transmitter for any other purpose, Canon cannot be held liable for
any loss or damage that may occur.
Areas of Use and Restrictions
7
Introduction
The following precautions are intended to prevent harm to you and others as well as damage to
equipment. Become familiar with the precautions before using the transmitter to ensure correct
and safe operation.
To prevent fire, excessive heat, chemical leakage, or explosion, follow these safety guidelines.
• Do not insert metallic objects between electrical contacts of the transmitter, accessories, or connecting cables.
Do not use the transmitter where there is flammable gas. There is a risk of explosion or fire.
If the transmitter is dropped and internal parts are exposed, do not touch the exposed parts. There is a risk of
electrical shock.
Do not disassemble or modify the transmitter. High-voltage internal parts may cause electrical shock.
Do not store the transmitter in dusty or humid places. There is a risk of fire or electrical shock.
Before using the transmitter on board airplanes or in hospitals, make sure use is permitted. Electromagnetic
waves emitted by the transmitter may interfere with instrumentation or medical equipment.
Do not leave the transmitter inside a vehicle in hot weather or near a heat source. The transmitter may become
hot and cause burns if touched.
Do not cover or wrap the transmitter with a cloth. This may trap heat inside, posing a risk of case deformation or
fire.
Do not use paint thinner, benzene, or other organic solvents to clean the transmitter. This poses a risk of fire and
may be hazardous to your health.
If the product malfunctions, becomes damaged, or requires repair, contact your dealer
or the nearest Canon Service Center.
The transmitter is a precision instrument. Do not drop it or subject it to shock.
The transmitter is not waterproof. Do not use it underwater.
Wipe off any moisture with a clean, dry cloth. If the transmitter has been exposed to salty air,
wipe it with a clean damp cloth after wringing it out to remove excess water.
Never leave the transmitter near any equipment that generates a strong magnetic field,
such as magnets or electric motors.
Do not leave the transmitter in excessive heat, such as in a vehicle in direct sunlight. High
temperature may damage the transmitter.
Do not wipe the transmitter using cleaners containing organic solvents. If the transmitter
becomes difficult to clean, take it to the nearest Canon Service Center.
To avoid corrosion, do not store the transmitter where there are strong chemicals, such as in
darkrooms or chemical labs.
Safety Warnings
Warning Preventing Serious Injury or Death
Caution Preventing Injury or Equipment Damage
Handling Precautions
8
Nomenclature
USB port
Ethernet
RJ-45 port
Terminal cap
receptacle
<
USB
> USB lamp
<
LAN
> Network lamp
Port cover
Locking lever
Attachment pin
Tightening
screw
Terminal
External Media Case*1
Waterproof/Dustproof USB Cap*2
Transmitter Case
*1: For storing portable hard disks or other devices.
*2: Attach this cap before connecting the USB cable in rainy weather or under other adverse conditions.
9
Introduction
Turn off the camera before attaching the transmitter.
Ensure the camera battery has sufficient charge. If the charge drops below 19%, you
cannot transfer captured images or back them up to external media.
1Remove the terminal cap from the
camera.
Unscrew the extension system terminal cap to
remove it.
Screw the terminal cap into the terminal cap
receptacle of the transmitter.
2Move the lever into the release position.
3Attach the transmitter.
Align the attachment pin with the WFT-E2/E2A
mounting hole on the camera.
Push the terminal firmly into the camera.
Turn the tightening screw until it stops rotating to
attach the transmitter securely.
4Move the lever into the locked position.
The transmitter is now attached to the camera.
The transmitter will be powered by the camera.
Removal
Turn off the camera.
Push the lever down, into the release position.
Loosen the tightening screw until it spins freely.
Pull the terminal out of the camera.
Attaching to the Camera
Camera terminal cap
10
In addition to wireless and wired LAN functions, the WFT-E2 can communicate with external
media and GPS devices.
For instructions on operations after you have attached the transmitter to the camera, click one
of the following chapter titles to view the corresponding page.
Subsequent Organization of This Manual
Using a Wireless or Wired LAN
(Basic Network Settings)
Chapters 1 to 5
Using External Media
Chapter 6
Using GPS Devices
Chapter 7
11
1
Basic Network Settings
Complete the basic network settings by following the instructions of the
transmitter connection wizard on the camera menu screen, which provides
guidance.
Getting Ready
The connection wizard helps you follow the steps to connect the transmitter to an
existing wireless or wired LAN.
To connect to a wireless LAN, prepare the wireless LAN device (wireless LAN access
point or wireless LAN adapter) and computer in advance so that they are ready for
you to connect the transmitter to the wireless network. When configuring the basic
network settings, bring the transmitter within 3 m/9.8 ft. of the wireless LAN device.
To connect to a wired LAN, use a LAN cable to connect the transmitter and computer.
Prepare the transmitter for connection to the wired network.
12
This section describes the process of following the connection wizard instructions. If an error is
displayed, refer to “Troubleshooting” in Chapter 8 (p.69) and check the settings.
Pressing the shutter button or other camera controls during configuration by the connection
wizard will close the connection wizard. Do not press the shutter button or other controls
until configuration is finished.
On the [5] tab, set [Auto power off] to [Off]. If auto power off is activated, the connection
wizard will be closed during the configuration process.
1Turn the camera on.
2Display the transmitter menu.
On the camera, press the <7> button.
On the [7] tab, select [WFT settings] and press
<0>. [WFT settings] is added to the tab after you
attach the transmitter.
3Select [Connection wizard].
XThe [Select communication method] screen is
displayed.
XThe <
LAN
> lamp starts blinking.
Displaying the Connection Wizard
13
1
Basic Network Settings
Turn the <5> dial to select the communication
method, and then press <0>.
Select [OK] and press <0> to go to the next
screen.
• FTP
Choose this option to transfer captured images to an FTP server.
Images can be automatically transferred as you shoot them, or you can select images for
transfer later.
Computer Operating Systems
Operation via [FTP] requires that Windows Vista (Business, Enterprise, or Ultimate Edition
for 32- or 64-bit systems), Windows XP Professional, Windows 2000, or Mac OS X 10.4 be
installed on your computer. In addition, the computer must be prepared as an FTP server in
advance.
For instructions on preparing your computer as an FTP server, refer to the computer
documentation.
Windows Vista Home Premium and Home Basic Edition as well as Windows XP Home
Edition cannot be used because FTP server functionality is not supported.
• PTP
Choose this option when using EOS Utility for remote capture over a wireless or wired LAN.
In addition to remote capture, all camera operations in EOS Utility are supported because a
wireless or wired network is used with this option instead of the USB cable.
Computer Operating Systems
Operation via [PTP] requires that any edition of Windows Vista for 32- or 64-bit systems
(except Starter Edition), Windows XP (Home Edition or Professional, with Service Pack 2),
or Mac OS X 10.4 be installed on your computer.
• HTTP
Choose this option for remote capture over a wireless or wired LAN.
In addition, images on a memory card in the camera can be viewed and downloaded to a
computer.
The camera can be accessed like browsing a webpage, by users at up to three computers.
Computer Operating Systems
Any computer with a web browser can be used, regardless of the operating system.
Following the Connection Wizard
Selecting the Communication Method
14
Following the Connection Wizard
Turn the <5> dial to select the type of LAN, and
then press <0>.
Select [OK] and press <0> to go to the next
screen.
Wireless LAN
Active wireless LAN devices in your area are found and listed.
Wired LAN
The [Network] settings screen is displayed. If you have selected a wired network, refer to page
16, “Configuring Network Settings.”
Use a Category 5 or higher STP LAN cable. (STP: Shielded Twisted Pair)
Wireless LAN devices are listed with identifying information. Select the SSID (or ESS-ID) of
your desired wireless LAN device.
To select the wireless LAN device, press <0>.
Turn the <5> dial to select the wireless LAN
device, and then press <0>.
Select [OK] and press <0> to go to the next
screen.
1Indicates whether the device is in infrastructure or ad hoc mode
2An icon is displayed if the wireless LAN device is encrypting communication
3Indicates the first 9 characters of the SSID
4Indicates the channel used
Encryption by Wireless LAN Devices
If the wireless LAN device is encrypting communication, select the corresponding method in
[Authentication] and [Encryption].
[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK
[Encryption]: WEP, TKIP, or AES
Selecting the LAN Type
Selecting the Wireless Network
123 4
15
1
Following the Connection Wizard
Basic Network Settings
[Enter connection] and [Search again]
To configure settings for the wireless LAN device manually, select [Enter connection] and
press <0>. Complete the settings for the items displayed, one after another.
To search for wireless LAN devices again, select [Search again] and press <0>.
Next, enter the encryption key of the wireless LAN device. For details on the encryption key,
refer to the device’s instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and
encryption of the wireless LAN device.
1 The [Key index] screen is displayed only if WEP
encryption is used by the wireless LAN device.
Turn the <5> dial to select the key index number
specified as the access point, and then press
<0>.
Select [OK] and press <0> to go to the next
screen.
2 Turn the <5> dial to select the key format, and
then press <0>.
Select [OK] and press <0> to go to the next
screen.
3 Enter the encryption key.
To switch between input areas, press the <H>
button.
To move the cursor, turn the <5> dial.
In the bottom input area, turn the <5> dial and
press <0> to enter the encryption key.
If you make a mistake, press the <L> button to
erase it.
Press the <7> button to go to the next screen.
To return to the previous screen, press the
<6> button. The entry is erased.
Entering the Wireless LAN Encryption Key
16
Following the Connection Wizard
Turn the <5> dial to select how to configure the
network settings, and then press <0>.
Select [OK] and press <0> to go to the next
screen.
[Auto setting]
Settings otherwise configured with [Manual setting] can be configured automatically.
However, the IP address and similar settings must be automatically assigned and
configured in environments using DHCP servers or wireless LAN devices or routers
supporting DHCP server functions.
If an error is displayed, select [Manual setting] regardless of whether the IP address and
similar settings are automatically assigned and configured.
[Manual setting]
The [IP address set.] screen is displayed after you select
manual configuration. If [Auto setting] results in an error,
enter the IP address manually. As the IP address, enter the
IP address assigned to the camera.
Enter the [IP address], [Subnet mask], [Gateway], and
[DNS address] on each screen as they are displayed.
If you are not sure what to enter, refer to page 84, “Checking
Network Settings,” or ask the network administrator or
another person knowledgeable about the network.
When entering numbers for the IP address, subnet mask,
and so on, press <0> to move the input position and turn
the <5> dial to enter the number.
Configuring Network Settings
17
1
Following the Connection Wizard
Basic Network Settings
The following instructions are for settings screens that vary depending on the communication
method (FTP, PTP, or HTTP), as shown below. Read the page that introduces the selected
communication method.
FTP
Chapter 2 (p.19)
PTP
Chapter 3 (p.33)
HTTP
Chapter 4 (p.39)
Completing Settings for the Communication Method
18
Following the Connection Wizard
The virtual keyboard is displayed during entry of the encryption key, server name, and other
information.
Switching to other input areas
To switch between input areas, press the <H>
button.
Moving the cursor
To move the cursor, turn the <5> dial.
You can also move the cursor using <9>.
Entering text
In the bottom input area, turn the <5> dial to move
the cursor and press <0> to enter text.
You can also move the cursor using <9>.
Deleting text
If you make a mistake, press the <L> button to erase
it.
Confirming entries
Press the <7> button to confirm what you have
entered and go to the next screen.
Canceling entries
Press the <6> button to erase the entry and
return to the previous screen.
Virtual Keyboard Operation
19
2
FTP Settings and
Image Transfer
You can configure the FTP settings for automatic transfer of each image as
you shoot or batch transfer after capture.
20
These instructions are continued from Chapter 1.
1 Turn the <5> dial to select [Address setting],
and then press <0>.
2 If you have set the DNS server setting to
[Disable], the screen at left is displayed.
Press <0> to select the input position, and then
turn the <5> dial to enter the IP address of the
FTP server.
If you have set the DNS server IP address setting
to [Auto assign] or [Manual setting], the screen
at left is displayed.
For instructions on screen operations, refer to
“Virtual Keyboard Operation” (p.18).
Enter the FTP server’s server name or IP address.
3 In [Port No.], enter 00021, in most cases.
Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.
4 Complete the [Proxy server] settings.
Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.
Configuring FTP Transfer Settings
21
Configuring FTP Transfer Settings
2
FTP Settings and Image Transfer
5 Complete the [Login method] settings.
Turn the <5> dial to select [OK], and then press
<0> to go to the next screen.
6 Complete the [Target folder] settings.
Select [Root folder] to have images saved in the
root folder as specified in FTP server settings.
(p.32)
Select [Select folder] to specify a subfolder in the
root folder. If no folder exists, a folder will be
created automatically.
Turn the <5> dial to select [OK], and then press
<0> to connect to the FTP server.
7 On the confirmation screen displayed next, select
[OK] and press <0>.
XThe <
LAN
> lamp is lit in green.
8 Press <0>. Turn the <5> dial to select the set
number, and then press <0>.
Turn the <5> dial to select [OK], and then press
<0>. After the connection wizard is closed, the
display reverts to the menu screen.
Settings information is stored on the camera. It is
not stored on the transmitter.
The FTP network settings are now complete.
22
An image can be automatically transferred to the FTP server immediately after shooting. You
can also continue shooting even while images are being transferred.
Before shooting, be sure to insert a memory card in the camera or connect external media
(p.53). If you shoot without recording images, they cannot be transferred.
1In [WFT settings], select [Set up].
2Select [Automatic transfer].
Select [Enable].
3Take the picture.
XThe captured image is transferred to the FTP
server.
During image transfer, the <
LAN
> lamp blinks.
Automatic Image Transfer After Each Shot
During continuous shooting, images are transferred to the FTP server in the order they are
captured.
The captured images are also stored on the memory card.
Any images for which transfer fails or is interrupted can transferred later together.
23
Automatic Image Transfer After Each Shot
2
FTP Settings and Image Transfer
With automatic transfer, you can choose which images to transfer if images are stored on
different memory cards depending on size, or if images of various types are recorded during
RAW+JPEG shooting.
1In [WFT settings], select [Set up].
2Select [Transfer type/size].
3Select the size and type of images to
transfer.
If the camera is set up to record larger JPEGs on a CF card and smaller JPEGs on an SD
card and you want to transfer the smaller JPEGs, set [Larger/smaller JPEG] to [Smaller
JPEG].
If the camera is set up to record RAW images on a CF card and JPEGs on an SD card,
specify which images to transfer in the [RAW+JPEG transfer] setting. Similarly, complete
the same setting if RAW+JPEG images are recorded simultaneously on a single memory
card.
If images of the same size are recorded on a CF card, SD card, and external media at the
same time, images recorded on the CF card are transferred, regardless of the image quality
(compression).
Selecting Particular Sizes or Types of Images to Transfer
24
Simply press <0> to transfer the currently displayed image. You can also add a caption before
transferring images. You can also continue shooting even while images are being transferred.
1In [WFT settings], select [Set up].
2Select [Transfer with SET].
Select [Enable].
3View the image.
On the camera body, press the <x> button.
Select the image to transfer, and then press <0>
to transfer the image.
Transferring Images Individually
Transferring the Current Image
25
Transferring Images Individually
2
FTP Settings and Image Transfer
You can add a registered caption to each image before transfer. This is effective if you want to
inform the recipient the printing quantity, for example. The caption is also added to images
stored on the camera.
For instructions on creating and registering captions, refer to page 88.
You can check for captions added to images by examining the Exif information, in the user
comments.
1Take the picture.
2In [WFT settings], select [Transfer with
caption].
XThe last captured image is displayed.
It is not possible to select other images on the
[Transfer with caption] screen. To select another
image for transfer with a caption, view that image
before following these steps.
3Select a caption.
Turn the <5> dial to select the [Caption] frame,
and then press <0>.
Turn the <5> dial to select the content of the
caption, and then press <0>.
4Transfer the image.
Turn the <5> dial to select [Transfer], and then
press <0>.
Adding a Caption Before Transfer
If you add captions to images that include original decision data, these images are no longer judged to
be original images.
26
After shooting, you can select multiple images as desired and transfer them all at once. You
can also transfer unsent images or images that could not be sent previously.
If both a CF card and SD card are in the camera, or if external media is connected, images are
transferred from the source specified on the menu [5] tab, in [Record func+media/folder
sel.] [Record/play].
You can also continue shooting even while images are being transferred.
1In [WFT settings], select [Image sel./
transfer].
2Select [Sel.Image].
XAn image is displayed.
3Select images to transfer.
Press <0>. Turn the <5> dial to display <X> in
the upper left corner of the image to transfer.
Press <0> to confirm your selection.
You can select up to 9,999 images.
Press the <y> button to display three images per
screen. Press the <u> button to display one
image per screen again.
After selecting images to transfer, press the
<7> button.
Batch Transfer
Selecting Images to Transfer
27
Batch Transfer
2
FTP Settings and Image Transfer
4Transfer the images.
Select [Transfer].
Select [OK] on the confirmation screen displayed
next.
XA transfer progress screen is displayed.
During image transfer, the <
LAN
> lamp blinks.
28
Batch Transfer
1In [WFT settings], select [Image sel./
transfer].
2Select [Sel.n].
3Select [Folder images not transfer’d].
To transfer images that could not previously be
transferred, select [Folder images failed transf.].
4Select a folder.
5Transfer the images.
Select [Transfer].
Select [OK] on the confirmation screen displayed
next.
XA transfer progress screen is displayed.
During image transfer, the <
LAN
> lamp blinks.
Batch Transfer of Images in a Folder
Selecting [Clear folder transf. history] will set the transfer history of images in the selected folder to
“unsent.” This enables you to resend all the images in the folder later by selecting [Folder images not
transfer’d].
29
Batch Transfer
2
FTP Settings and Image Transfer
1In [WFT settings], select [Image sel./
transfer].
2Select [All image].
3Select [Card images not transferred].
To transfer images that could not previously be
transferred, select [Card images failed transfer].
4Transfer the images.
Select [Transfer].
Select [OK] on the confirmation screen displayed
next.
XA transfer progress screen is displayed.
During image transfer, the <
LAN
> lamp blinks.
Batch Transfer of Images on Memory Cards
Selecting [Clear card’s transf. history] will set the transfer history of images on the memory card to
“unsent.” This enables you to resend all the images on the card later by selecting [Card images not
transferred].
30
Batch Transfer
You can use the menu even during image transfer. However, to prevent transfer problems,
some menu items are unavailable during transfer, including [WFT settings], [Protect images],
[Erase images], and [Format].
Menu Operation During Image Transfer
31
2
FTP Settings and Image Transfer
To check the transfer history, in [Image sel./transfer], select [Sel.Image].
Image not selected for transfer (no icon)
Image selected for transfer
Image could not be transferred
Image transferred
On the [Image sel./transfer] screen, you can check
the number of images for transfer as well as the
transfer history of images in the selected folder or
memory card. Specifically, you can check the number
of images classified as [Images failed trans.] and
[Images transferred].
Checking Image Transfer History
Checking the Transfer History of Individual Images
Checking the Transfer History of Folders or Memory Cards
32
Images transferred to the FTP server are stored in the following folder as specified in the FTP
server settings.
Under the default settings of the FTP server, images are stored in [C drive] [Inetpub]
folder [ftproot] folder, or in a subfolder of this folder.
If the root folder of the transfer destination has been changed in the FTP server settings, ask
the FTP server administrator where images are transferred.
Open the [Macintosh HD] [Users] folder. The folder where images are stored is located
in the folder of the user currently logged on, or in a subfolder there.
Under the default transmitter settings, transferred images will be stored in the root folder
specified in the FTP server settings, in a folder structure such as A/DCIM/100EOS1D which is
automatically created.
Additionally, if you have selected a CF card as the media for recording and playback, a folder
structure such as “A/DCIM/100EOS1D” is automatically created for image storage. For an SD
card, “B/DCIM/100EOS1D” is created, and for external media, “C/DCIM/100EOS1D” is
created. (CF card images are assigned to the A folder, SD card images to the B folder, and
external media images to the C folder.)
Viewing Transferred Images
Windows
Macintosh
Folders for Image Storage
33
3
PTP Settings and
Remote Capture
You can use EOS Utility to shoot remotely over a wireless or wired LAN.
In addition to remote capture, all camera operations in EOS Utility are
supported because a wireless or wired network is used with this option
instead of the USB cable.
34
These instructions are continued from Chapter 1.
You can use the included WFT Pairing Software to enable the transmitter to communicate with
a computer via PTP.
WFT Pairing Software is installed automatically during easy installation of the software
provided with the camera. If it is not installed, install it on the computer for communication with
the transmitter before this procedure.
The configuration procedure is as follows, using Windows XP as an example.
1 First, the pairing screen is displayed.
Turn the <5> dial to select [OK]. When you press
<0>, the following message is displayed. Here,
****** represents the last six digits of the MAC
address of the WFT-E1 for the connection.
2 Start the pairing software.
Normally, it is installed in the same location as
EOS Utility.
XAfter the pairing software starts up, an icon is
displayed in the task bar.
XWhen the camera is detected, a message is
displayed.
Configuring PTP Transfer Settings
35
Configuring PTP Transfer Settings
3
PTP Settings and Remote Capture
3 Double-click the pairing software icon.
XDetected cameras are listed. Cameras that have
already been connected are not included in the
list.
Click [Connect].
If multiple cameras are displayed, identify the
camera to connect to by its [MAC address] or [IP
address].
You can check the [MAC address] and [IP
address] by accessing [Confirm settings] in the
menu (p.48).
4 When the camera detects the computer on which
you clicked [Connect] in step 3, the message at
left is displayed.
Turn the <5> dial to select [OK], and then press
<0>.
5 Press <0>. Turn the <5> dial to select the set
number, and then press <0>.
After you turn the <5> dial to select [OK] and
press <0>, the connection wizard is closed and
EOS Utility starts up.
XThe <
LAN
> lamp on the transmitter is lit in green.
Settings information is stored on the camera. It is
not stored on the transmitter.
The PTP network settings are now complete.
36
Configuring PTP Transfer Settings
There is no need to complete pairing again if you will continue using a particular camera,
transmitter, and computer together after pairing without changing the settings.
Before your next PTP session, simply turn on the camera to which the transmitter is
attached and start the pairing software. The connection between the camera and computer
will be established automatically.
You can add the pairing software to the software launched at startup of your computer. In
EOS Utility on the [Preferences] [Basic Settings] tab, select [ Add WFT Pairing
Software to the Startup folder].
37
3
PTP Settings and Remote Capture
For EOS Utility instructions, refer to the Software Instruction Manual (PDF). You can take full
advantage of EOS Utility via the transmitter just as via a USB connection, without restrictions.
Using EOS Utility
In Remote Live View shooting, the rate of image transmission is slower than via USB. The motion of
moving subjects cannot be displayed smoothly.
38
39
4
HTTP Settings and
Remote Capture
You can use a web browser to shoot remotely over a wireless or wired LAN.
In addition, images on a memory card in the camera can be viewed and
downloaded to a computer.
40
These instructions are continued from Chapter 1.
Press <0>. Turn the <5> dial to select the set
number, and then press <0>.
Turn the <5> dial to select [OK], and then press
<0>. After the connection wizard is closed, the
display reverts to the menu screen.
XThe <
LAN
> lamp on the transmitter is lit in green.
Settings information is stored on the camera. It is
not stored on the transmitter.
Enter a logon name and password for accessing the camera from a computer. The logon name
and password you specify here are used on the computer when connecting to the camera.
1 Turn the <5> dial to select [Set up], and then
press <0>.
2 Turn the <5> dial to select [HTTP account], and
then press <0>.
3 Select a user number.
The camera can be accessed via HTTP from up to
three computers. Here, select a user number to
prevent conflicts when users at other computers
are connected to the transmitter simultaneously.
Turn the <5> dial to select [User *], and then
press <0>.
Configuring HTTP Transfer Settings
Setting up an Account
41
Configuring HTTP Transfer Settings
4
HTTP Settings and Remote Capture
4 After you select [Login name] and [Password],
the following input screen is displayed.
For instructions on input screen operations, refer
to “Virtual Keyboard Operation” (p.18).
The HTTP network settings are now complete.
42
In the web browser, display WFT Server, a screen for transmitter operations.
Make sure you have already established a connection between the camera and computer.
1Start the web browser.
First, start Internet Explorer or another web
browser.
2Enter the URL.
In the address field, enter the IP address assigned
to the camera.
Press the <
Enter
> key.
XThe account screen is displayed.
Enter the login name and password as specified in
the procedure on page 41. Click [OK] to display the
WFT Server screen.
Select the language.
Displaying WFT Server
If you don’t know the URL (IP address)
You can check the URL (IP address) by accessing [Confirm settings] in the menu (p.48).
43
4
HTTP Settings and Remote Capture
1Click [Capture].
XThe capture screen is displayed.
2Take the picture.
Set the lens focus mode switch to <g> and
adjust the focus.
In the browser, click the release button of the
simulated remote control. The camera will shoot
when the button is released.
XThe captured image is displayed in the simulated
camera monitor in the browser.
Captured images are stored on the memory card.
Shooting Remotely
44
Shooting Remotely
3Download images to the computer.
Click the image.
XThe image is displayed at a larger size.
Follow the web browser instructions to download
the image to the computer.
To return to the remote capture screen, click
[Return].
RAW images are not displayed, but they can be downloaded to the computer the same way as
JPEGs.
45
4
HTTP Settings and Remote Capture
Browse images on the camera’s memory card as follows.
1Click [Viewer].
XThe Viewer screen is displayed.
2Select the memory card.
If the camera is connected to external media, the
corresponding icon is also displayed.
Click the [DCIM] folder and select the folder where
images are stored.
3Select an image.
To view another image, click the < >
buttons or jump to other pages.
Viewing Images
46
Viewing Images
4Download images to the computer.
Click a thumbnail.
XThe image is displayed at a larger size.
Follow the web browser instructions to download
the image to the computer.
Click [Return] to return to the image viewing
screen.
RAW images are not displayed, but they can be downloaded to the computer the same way as
JPEGs.
47
5
Managing
Settings Information
48
Check the network settings as follows.
1In [WFT settings], select [Set up].
2 Select [Confirm settings].
XThe settings are displayed.
Checking Settings
E
xamp
l
e o
f
FTP
an
d
w
i
re
d
LAN
se
tti
ngs
E
xamp
l
e o
f
FTP
an
d
w
i
re
l
ess
LAN
se
tti
ngs
49
5
Managing Settings Information
Settings originally completed using the connection wizard can be changed as follows. You can
also change IP security settings (IPsec) not completed using the connection wizard, as well as
other settings, such as the setting that determines what happens if an image of the same file
name as an existing file is sent to the FTP server. (p.50)
1In [WFT settings], select [Set up].
2Select [LAN settings].
3Select the settings number.
Here, select the settings number that identifies the
LAN settings.
4Select [Change].
After selecting [Change settings name], you can
rename the settings.
5Select the item to change.
Select the desired item from [LAN type], [TCP/IP],
[FTP server], or [Wireless LAN] and change the
setting.
Changing Settings
50
Changing Settings
Configured in [TCP/IP] [Security].
IPsec is a set of standards for encrypted communication over the Internet. It provides effective
security for both wireless and wired LANs. To use this function, you must enable IPsec in the
network settings of your computer. When IPsec is employed, only transport mode is supported,
and DES encryption and SHA1 authentication are used. Note that the IP address of the
computer for communication with the transmitter must be entered in [Destination address] on
the settings screen.
Configured in [FTP server] [Directory structure].
Selecting [Camera] automatically creates a folder structure matching that of the camera’s (such
as A/DCIM/100EOS1D) in the server’s root folder for image storage. If you have created a
subfolder in the root folder by changing the [Target folder] setting, a folder structure such as A/
DCIM/100EOS1D is automatically created in that folder for image storage.
Selecting [Default] will use the root folder for image storage. If you have created a subfolder in
the root folder by changing the [Target folder] setting, images are saved in that folder.
Configured in [FTP server] [Overwrite same file].
When the transmitter is configured to prevent overwriting
If there is already a file of the same name in the target folder on the FTP server, the new file is
saved with an extension consisting of an underline and a number, as in GA5P0003_1.JPG.
When you resend images if initial transfer fails
Even if the transmitter is configured to overwrite files of the same name, if you resend an image
file that could not be transferred initially, the existing file may not be overwritten in some cases.
If this happens, the new file is saved with an extension consisting of an underline, a letter, and
a number, as in GA5P0003_a1.JPG.
Configured in [FTP server] [Passive mode].
Enable this setting in network environments protected by a firewall. If an Error 41 occurs
(“Cannot connect to FTP server”), setting passive mode to [Enable] may enable access to the
FTP server.
To prevent accidental changes to LAN settings, set [Protect
settings] to [On].
IP Security (IPsec)
Directory Structure of the Target Folder
Overwriting Files of the Same Name
Passive Mode
Preventing Changes to Settings
51
5
Managing Settings Information
Network settings can be saved on a memory card for use with other cameras.
1In [WFT settings], select [Set up].
2Select [LAN settings].
3Select the settings number.
Here, select the settings number that identifies the
LAN settings.
4Select [Change].
5Select [Save settings].
Saving and Loading Settings
Saving Settings
52
Saving and Loading Settings
6Select [Save].
XThe settings are now saved as a file on the
memory card.
The file name is determined automatically by the
camera: WFTNPF, followed by a number (01 to
99) and the extension NIF. You can rename the file
as desired by selecting [Change file name].
Load settings files stored on a memory card as follows. Also use this procedure when loading
settings files created on a computer.
Make sure the settings file is saved in the folder shown when the memory card is opened (that
is, the root directory).
1Select [Load settings].
2Select the settings file.
XSelect a settings file that matches your network
environment.
3Load the settings file.
XInformation from the settings file is loaded into the
selected settings number.
Loading Settings
53
6
Using External Media
Commercially available external media, connected via USB, can be used
the same way as CF and SD cards. You can also backup images from CF
and SD cards onto external media.
Note that external media must meet the following requirements.
Use media conforming to the USB Mass Storage Class Specification.
If an external hard disk drive is used, use a self-powered drive. Bus-
powered drives do not work in some situations.
The main image storage area must be formatted with a FAT16 or
FAT32 file system.
Use media with a main image storage area of less than 1 TB
(terabyte), with 512 bytes per sector.
Do not use external media equipped with a card slot.
54
Before connecting external media to the transmitter, switch the camera power switch to
<2>. Also turn off external media that has its own power supply.
When connecting external media, be sure to use the USB cable provided with the camera.
The transmitter USB port is not hot-pluggable. USB cables cannot be connected or
disconnected at any time. Follow the instructions in this section when connecting or
disconnecting USB cables.
1Plug the external media into the USB
port.
Open the port cover and connect the external
media.
Do not connect external media via a USB hub.
If the external media is self-powered, turn it on
after connecting it.
2In [WFT settings], select [USB device
connec.].
If you will not use a wireless or wired LAN at the
same time as the external media, set
[Communication mode] to [Disconnect].
3Select [Storage].
4Select [Connect].
Connecting External Media
55
Connecting External Media
6
Using External Media
5Select [OK].
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
When the transmitter is connected to the external
media, the transmitter’s <
USB
> lamp is lit in green
and a message is displayed indicating that a
connection has been established.
When the confirmation message is displayed,
select [OK].
XAt this point, the menu option [Disconnect]
becomes available. Select this option before
disconnecting the external media.
XAfter you exit the menu, the camera’s rear LCD
panel indicates that external media is connected.
External media cannot be formatted using the camera. Format it with a FAT16 or FAT32 file
system using the computer.
56
Connecting External Media
Before unplugging external media from the USB port, always select [Disconnect] as shown in
step 5. Follow the instructions displayed to terminate the connection.
The connection will not be terminated if you simply turn off the camera and external media. If
you unplug external media while the connection is still active, plug the external media into the
USB port again and follow the preceding steps to terminate the connection.
External media is powered via the transmitter’s USB port as needed. However, external hard
disk drives may not work after connection in some cases.
Power Management
If you will not use a wireless or wired LAN at the
same time as the external media, set
[Communication mode] to [Disconnect]. The
camera battery drains faster under settings other
than [Disconnect] because power saving is
disabled.
Setting [Power saving] to [Enable] enables the
power supply to external media to be stopped
automatically, conserving the camera battery.
Power is supplied again automatically during
shooting, when captured images are stored.
Unplugging External Media from the USB Port
Power Supply to External Media
57
6
Using External Media
Images can be stored on external media connected via USB just as on CF and SD cards.
You can also configure [Record func.], [Record/play], and [Folder] settings (described below)
to use the external media. For details, refer to the Camera Instruction Manual (page 73).
On the [5] tab, select [Record
func+media/folder sel.].
XThe icon for external media is displayed next to
icons for the CF and SD cards.
Complete the following settings, as needed. For
details on using [Record/play] with external
media, refer to the next page.
Choosing Recording Media When Shooting
Although the <
USB
> lamp will blink in green briefly if the camera is restarted or recovering from auto
power off, shooting is still possible. Any images captured at this time are stored temporarily in the
camera's internal memory and then recorded on external media when the <
USB
> lamp remains lit in
green.
58
Choosing Recording Media When Shooting
When you select external media in [Record/play], the [Select location for DCIM folder]
screen is displayed. The DCIM folder contains the EOS1D folder, where images are stored.
To create the DCIM folder in the first folder
displayed when the external media is opened (that
is, the root directory), select the default setting of [/].
To create another parent folder for the DCIM
folder, select [Create folder]. A screen is
displayed for entering the folder name.
By default, the folder name comprises the current
date (last two digits of the year, in addition to the
month and day) and numbers representing the
order the folder was created, in a range of 01 to
99.
Always use 8 characters for the folder name.
For instructions on entering the folder name, refer to
“Virtual Keyboard Operation” (p.18).
[Record/play] Setting
59
6
Using External Media
Images can be copied to external media connected via USB just as to CF and SD cards.
1On the [5] tab, select [Record
func+media/folder sel.].
XThe icon for external media is displayed next to
icons for the CF and SD cards.
2Select the source media in [Record/
play].
After selection, press the <7> button to return
to the menu screen.
3On the [3] tab, select [Image copy].
For subsequent instructions, refer to the Camera
Instruction Manual (page 125). Operations are the
same as when using a CF or SD card, except that
the external media icon <u> is displayed.
Copying Images
60
Images stored on CF or SD cards can be backed up on external media.
Initially, captured images are stored in the DCIM folder on CF or SD cards. Selecting [External
media backup] backs up this DCIM folder to external media.
1On the [3] tab, select [External media
backup].
2Check the free space on the media.
Make sure more space is available on the external
media than the amount used on the memory card.
If less free space is available on the external
media, backup is not possible.
3Select the method of backup.
Select [Quick backup] or [Backup].
Backing Up on External Media
You can also backup the MISC folder, where printing and transfer instructions are stored.
External media cannot be backed up onto memory cards.
If the backup destination already has a folder of the same number containing images of the same
number, [Skip image and continue], [Replace existing image], and [Cancel backup] are
displayed. Select the backup method and press <0>.
•[Skip image and continue]: All images are backed up except for images of the same number as
existing images
•[Replace existing image]: All images are backed up, including images of the same number as
existing images
Shooting is not possible during backup. Press [Cancel] before shooting.
61
Backing Up on External Media
6
Using External Media
A simple method of backup is available, as follows.
1Select [Quick backup].
2Select the source memory card.
3Select [Start].
4Select [OK].
XThe backup process now begins.
When the message indicating completion is
displayed, select [OK].
Quick Backup
62
Backing Up on External Media
Where the DCIM Folder is Stored
The DCIM folder is stored in a directory indicated
by a file path such as [u/07031902/].
The target folder name comprises the current date
(last two digits of the year, in addition to the month
and day) and numbers representing the order the
folder was created, in a range of 01 to 99.
In the example shown at left, the folder displayed
when the external media is opened (that is, the
root directory) is named 07031902. The DCIM
folder is stored in this folder.
This is also the target folder name displayed when
using the regular [Backup] option.
Select regular [Backup] to create or use a folder of your choice as the parent folder of the
DCIM folder. You can also name this folder as desired. Other functions in this method of backup
are the same as for [Quick backup].
1Select [Backup].
2Select the source memory card.
3Select [DCIM location].
Backup
63
Backing Up on External Media
6
Using External Media
4Select [Create folder].
5Enter the [Folder name].
Always use 8 characters for the folder name.
For instructions on entering the folder name, refer
to “Virtual Keyboard Operation” (p.18).
6Select [Start].
7Select [OK].
XThe backup process now begins.
When the message indicating completion is
displayed, select [OK].
64
Backing Up on External Media
The provided external media case can hold portable hard disks up to 120 x 75 x 15 mm/
4.72 x 2.95 x 0.59 in.
External Media Case
65
7
Using GPS Devices
Commercially available GPS devices connected via USB can obtain
information including the latitude, longitude, altitude, and date and time of
shooting and add it to images. The additional information can be checked
on the camera as well as by using GPS-compatible mapping software.
The transmitter can be used with Garmin GPSMAP or eTrex series or
Magellan eXplorist series GPS devices that produce data in the format
NMEA 0183 Ver. 2.0.1, as well as some devices that produce Garmin
protocol data (as of February 2007).
For a list of specific GPS devices supported, contact the Canon Customer
Service Center.
For GPS device instructions, refer to the device’s instruction manual or contact the
manufacturer.
66
Turn off the GPS device and camera before connecting them.
When connecting GPS devices, be sure to use the USB cable provided with the camera.
The transmitter USB port is not hot-pluggable. USB cables cannot be connected or
disconnected at any time. Follow the instructions in this section when connecting or
disconnecting USB cables.
1Plug the GPS device into the USB port.
Open the port cover and connect the GPS device.
Do not connect GPS device via a USB hub.
Do not turn the GPS device on until step 5.
2In [WFT settings], select [USB device
connec.].
If you will not use a wireless or wired LAN at the
same time as the GPS device, set
[Communication mode] to [Disconnect].
3Select [GPS].
4Select [Connect].
Connecting GPS Devices
67
Connecting GPS Devices
7
Using GPS Devices
5Select [OK].
After selecting [OK], turn the GPS device on.
It may take a few minutes to establish a connection
with the GPS device. Camera operations such as
shooting, menu display, or image playback are
not possible until the connection is established.
When the transmitter is connected to the GPS
device, the transmitter’s <
USB
> lamp is lit in green
and a message is displayed indicating that a
connection has been established.
When the confirmation message is displayed, select
[
OK
].
XAt this point, the menu option [Disconnect]
becomes available. Select this option before
disconnecting the GPS device.
6Take the picture.
Make sure the transmitter’s <
USB
> lamp is lit in
green before shooting.
If the <
USB
> lamp is not lit in green when you shoot,
correct GPS data will not be added to images.
7Check the GPS data.
View an image.
Press the <6> button to display the shooting
information screen with GPS data.
From top to bottom: latitude, longitude,
altitude, and Coordinated Universal Time
The date and time indicated is the Coordinated Universal Time (UTC) as obtained by the GPS device,
which is nearly the same as Greenwich Mean Time (GMT). In some cases, the date and time of the
zone specified on the GPS device is indicated.
If the camera is restarted or recovering from auto power off, do not shoot until the <
USB
> lamp remains lit
in green. If you shoot while the lamp is blinking, the correct GPS information may not be added to images.
68
Connecting GPS Devices
Before unplugging GPS devices from the USB port, always select [Disconnect] as shown in
step 5. Follow the instructions displayed to terminate the connection.
The connection will not be terminated if you simply turn off the camera and GPS device. If you
unplug GPS device while the connection is still active, plug the GPS device into the USB port
again and follow the preceding steps to terminate the connection.
If you will not use a wireless or wired LAN at the
same time as the GPS device, set
[Communication mode] to [Disconnect]. The
camera battery drains faster under settings other
than [Disconnect] because power saving is
disabled.
Unplugging GPS Devices from the USB Port
Power Management
69
8
Troubleshooting
70
If transmitter errors are displayed on the camera LCD monitor, or if the <
USB
> or <
LAN
> lamps
blink in red, refer to the examples of corrective actions in this section to eliminate the cause of
the error.
Click the error number in the following chart to jump to the corresponding page.
Responding to Error Messages
11 (p.71) 12 (p.71)
21 (p.71) 22 (p.72) 23 (p.72) 24 (p.73) 25 (p.74)
26 (p.74)
31 (p.75) 32 (p.75) 33 (p.75) 34 (p.75)
41 (p.76) 42 (p.77) 43 (p.77) 44 (p.78) 45 (p.78)
46 (p.78) 47 (p.79)
61 (p.79) 62 (p.80) 63 (p.80) 64 (p.80) 65 (p.81)
66 (p.81) 67 (p.81)
81 (p.82)
99 (p.82)
71
Responding to Error Messages
8
Troubleshooting
Is the pairing software running?
XStart the pairing software and follow the instructions to re-establish the connection. (p.34)
Are the transmitter and wireless LAN device configured with the same encryption
key for authentication?
XThis error occurs if the encryption keys do not match when the authentication method for
encryption is [Open system].
The setting is case-sensitive, so check upper- and lower-case characters. Make sure the
correct encryption key for authentication is entered on the transmitter. (p.15)
Are the target computer and wireless LAN device on?
XTurn on the target computer and wireless LAN device.
What to check on the transmitter
On the transmitter, the network setting is [Auto setting] or the IP address setting is
[Auto assign]. Does the error occur under these settings?
XIf no DHCP server is used, set the transmitter’s network setting to [Manual setting] and
IP address setting to [Manual setting]. (p.16)
What to check on the DHCP server
Is the DHCP server on?
XTurn the DHCP server on.
Are there enough addresses for assignment by the DHCP server?
XIncrease the number of addresses assigned by the DHCP server.
XRemove devices assigned addresses by the DHCP server from the network to reduce the
number of addresses in use.
Is the DHCP server working correctly?
XCheck the DHCP server settings to make sure it is working correctly as a DHCP server.
XIf applicable, ask your network administrator to ensure the DHCP server is available.
11: Connection target not found
12: Connection target not found
21: No address assigned by DHCP server
Responding to Error Messages 21 - 26
Also check the following points when responding to errors numbered 21 - 26.
Are the transmitter and wireless LAN device configured with the same encryption key for
authentication?
XThis error occurs if the encryption keys do not match when the authentication method for
encryption is [Open system]. The setting is case-sensitive, so check upper- and lower-case
characters. Make sure the correct encryption key for authentication is entered on the transmitter.
(p.15)
72
Responding to Error Messages
What to check on the transmitter
On the transmitter, the DNS address setting is [Auto assign] or [Manual setting].
Does the error occur under these settings?
XIf no DNS server is used, set the transmitter’s DNS address setting to [Disable]. (p.16)
On the transmitter, does the DNS server’s IP address setting match the server’s
actual address?
XConfigure the IP address on the transmitter to match the actual DNS server address.
(p.16, 84)
What to check on the DNS server
Is the DNS server on?
XTurn the DNS server on.
Are the DNS server settings for IP addresses and the corresponding names
correct?
XOn the DNS server, make sure IP addresses and the corresponding names are entered
correctly.
Is the DNS server working correctly?
XCheck the DNS server settings to make sure the server is working correctly as a DNS
server.
XIf applicable, ask your network administrator to ensure the DNS server is available.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
XIf applicable, ask your network administrator for the network gateway address and enter it
on the transmitter. (p.16, 84)
XMake sure the gateway address setting is correctly entered on all network devices,
including the transmitter.
What to check on the transmitter
Is another device on the transmitter network using the same IP address as the
transmitter?
XChange the transmitter’s IP address to avoid using the same address as another device
on the network. Otherwise, change the IP address of the device that has a duplicate
address.
XIn network environments with a DHCP server, if the transmitter’s IP address setting is
[Manual setting], change it to [Auto assign]. (p.16)
22: No response from DNS server
23: Duplicate IP address
73
Responding to Error Messages
8
Troubleshooting
What to check on the transmitter
The transmitter’s proxy server setting is [Enable]. Does the error occur under this
setting?
XIf no proxy server is used, set the transmitter’s proxy server setting to [Disable]. (p.20)
Do the transmitter’s [Address setting] and [Port No.] settings match those of the
proxy server?
XConfigure the transmitter’s proxy server address and port number to match those of the proxy
server. (p.20)
In the transmitter’s [Proxy server] settings, have you only entered [Server name]?
XIf the proxy server’s [Address] setting is not configured on the transmitter, enter it along
with the DNS server address. (p.16) Make sure the server name and port number for the
proxy server are entered correctly. (p.20)
What to check on the proxy server
Is the proxy server on?
XTurn the proxy server on.
Is the proxy server working correctly?
XCheck the proxy server settings to make sure the server is working correctly as a proxy
server.
XIf applicable, ask your network administrator for the proxy server address or server name
and port number, and then enter them on the transmitter.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
XIf applicable, ask your network administrator for the network gateway address and enter it
on the transmitter.
XMake sure the gateway address setting is correctly entered on all network devices,
including the transmitter.
24: No response from proxy server
74
Responding to Error Messages
Is another device on the transmitter network using the same IP address as the
transmitter?
XThis error occurs if the transmitter is connected to a network where another device
subsequently connects with the same IP address. Change the transmitter’s IP address to
avoid using the same address as another device on the network. Otherwise, change the
IP address of the device that has a duplicate address.
What to check on the transmitter
On the transmitter, the network setting is [Auto setting]. Does the error occur under
this setting?
XIf no DHCP server is used, set the transmitter’s network setting to [Manual setting].
(p.16)
What to check on the DHCP server
Is the DHCP server on?
XTurn the DHCP server on.
Are the DHCP server settings for IP addresses and the corresponding names
correct?
XOn the DHCP server, make sure IP addresses and the corresponding names are entered
correctly.
Is the DHCP server working correctly?
XCheck the DHCP server settings to make sure it is working correctly as a DHCP server.
XIf applicable, ask your network administrator to ensure the DHCP server is available.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
XIf applicable, ask your network administrator for the network gateway address and enter it
on the transmitter. (p.16)
XMake sure the gateway address setting is correctly entered on all network devices,
including the transmitter.
25: Another terminal has set the same IP address
26: No response from DHCP server
75
Responding to Error Messages
8
Troubleshooting
Has the USB cable been disconnected?
XAfter connecting the USB cable, in [WFT settings], select [USB device connec.] and
reconnect the device.
Is the USB device on?
XTurn the USB device on. Next, also in [WFT settings], select [USB device connec.] and
reconnect the device.
Have you connected a USB device other than external media or a GPS device?
XConnect only external media or a GPS device.
The device is incompatible with the transmitter.
XExternal media with built-in card slots are not compatible. Similarly, USB card readers
cannot be used.
Is the external media formatted with a FAT16 or FAT32 file system?
XFormat the external media with a FAT16 or FAT32 file system using the computer.
The GPS device is incompatible with the transmitter.
XAmong GPS devices, we recommend devices for which operation has been verified by
Canon.
There is a problem with the external media.
XConnect the external media to a computer and confirm that it is working correctly.
Have you connected a USB device other than external media or a GPS device?
XConnect only external media or a GPS device.
31: USB connection disconnected
32: Incompatible USB device
33: USB device error
34: Cannot connect to USB device
76
Responding to Error Messages
What to check on the transmitter
On the transmitter, does the FTP server’s IP address setting match the server’s
actual address?
XConfigure the IP address on the transmitter to match the actual FTP server address.
(p.20)
Are the transmitter and wireless LAN device configured with the same encryption
key for authentication?
XThis error occurs if the encryption keys do not match when the authentication method for
encryption is [Open system].
The setting is case-sensitive, so check upper- and lower-case characters. Make sure the
correct encryption key for authentication is entered on the transmitter. (p.15)
On the transmitter, does the [Port number setting] for the FTP server match the
actual port number of the FTP server?
XConfigure the same port number (usually 21) on the transmitter and FTP server.
Configure the port number on the transmitter to match the actual FTP server port number.
(p.20)
If only the FTP server’s [Server name] is configured on the transmitter, are the DNS
server settings complete?
XIf the FTP server’s [Address] setting is not configured on the transmitter, enable use of
the DNS server on the transmitter and enter its address. (p.16) Make sure the FTP server
name is entered correctly. (p.20)
What to check on the FTP server
Is the FTP server working correctly?
XConfigure the computer correctly to function as an FTP server.
XIf applicable, ask your network administrator for the FTP server address and port number,
and then enter them on the transmitter.
Is the FTP server on?
XTurn the FTP server on. The server may have been turned off because of an energy-
saving mode.
On the transmitter, does the FTP server’s IP address setting (in [Address]) match
the server’s actual address?
XConfigure the IP address on the transmitter to match the actual FTP server address.
(p.20)
Is a firewall or other security software enabled?
XSome security software uses a firewall to restrict access to the FTP server. Change the
firewall settings to allow access to the FTP server.
XYou may be able to access the FTP server by setting [Passive mode] to [Enable] on the
transmitter. (p.50)
41: Cannot connect to FTP server
77
Responding to Error Messages
8
Troubleshooting
Are you connecting to the FTP server via a broadband router?
XSome broadband routers use a firewall to restrict access to the FTP server. Change the
firewall settings to allow access to the FTP server.
XYou may be able to access the FTP server by setting [Passive mode] to [Enable] on the
transmitter. (p.50)
If you are using Windows XP Service Pack 2, is access to the FTP server blocked
by the [Windows Firewall]?
XChange the Windows Firewall settings to allow access to the FTP server.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
XIf applicable, ask your network administrator for the network gateway address and enter it
on the transmitter. (p.16)
XMake sure the gateway address setting is correctly entered on all network devices,
including the transmitter.
What to check on the FTP server
Is the FTP server configured to restrict access to only some IP addresses?
XChange the FTP server settings to allow access from the [IP address] configured on the
transmitter in the TCP/IP settings.
What to check on the FTP server
Have you exceeded the maximum number of FTP server connections?
XDisconnect some network devices from the FTP server or increase the maximum number
of connections.
42: FTP server rejected connection
43: Cannot connect to FTP server. Error code received from server.
78
Responding to Error Messages
This error occurs if the transmitter fails to disconnect from the FTP server for some
reason.
XRestart the FTP server and camera.
What to check on the transmitter
On the transmitter, is the [Login name] entered correctly?
XCheck the logon name for accessing the FTP server. The setting is case-sensitive, so
check upper- and lower-case characters. Make sure the correct logon name is entered on
the transmitter. (p.21)
On the transmitter, is the [Login password] entered correctly?
XIf a logon password is configured on the FTP server, check the upper- and lower-case
characters to make sure the password on the transmitter matches it. (p.21)
What to check on the FTP server
Do the user rights for the FTP server allow reading, writing, and log access?
XConfigure the FTP server’s user rights to allow reading, writing, and log access.
What to check on the FTP server
The connection was terminated by the FTP server.
XRestart the FTP server.
Do the user rights for the FTP server allow reading, writing, and log access?
XConfigure the FTP server’s user rights to allow reading, writing, and log access.
Do user rights allow access to the target folder on the FTP server?
XConfigure the user rights for access to the target folder on the FTP server to allow saving
images from the transmitter.
Is the FTP server on?
XTurn the FTP server on. The server may have been turned off because of an energy-
saving mode.
Is the hard disk of the FTP server full?
XIncrease available space on the hard disk.
44: Cannot disconnect FTP server. Error code received from server.
45: Cannot login to FTP server. Error code received from server.
46: For the data session, error code received from FTP server
79
Responding to Error Messages
8
Troubleshooting
This error occurs if, for some reason, the transmitter fails to receive confirmation
from the FTP server that image file transfer is complete.
XRestart the FTP server and camera and send the images again.
Are any obstacles blocking the line of sight between the transmitter and the
antenna of the wireless LAN device?
XMove the antenna to a position clearly visible from the point of view of the transmitter.
(p.83)
What to check on the transmitter
On the transmitter, does the SSID setting match that of the wireless LAN device?
XCheck the SSID on the wireless LAN device, and configure the same SSID on the
transmitter. (p.14)
What to check on the wireless LAN device
Is the wireless LAN device on?
XTurn on the wireless LAN device.
On wireless LAN devices supporting IEEE 802.11a, are the device settings locked
on IEEE 802.11a?
XConfigure the wireless LAN device to allow access via IEEE 802.11b and g.
If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN device?
XRegister the transmitter’s MAC address (p.48) on the wireless LAN device.
47: Image file transfer completion not confirmed by FTP server
61: Same SSID wireless LAN terminal not found
80
Responding to Error Messages
What to check on the transmitter
Is the transmitter configured for communication in infrastructure mode?
XConfigure the transmitter for communication in ad hoc mode.
What to check on the wireless LAN device
Is there a nearby wireless LAN device for ad hoc communication?
XPrepare a wireless LAN device for ad hoc communication near the transmitter.
Are the transmitter and wireless LAN device configured for the same
authentication method?
XThe transmitter supports these authentication methods: [Open system], [Shared key],
[WPA-PSK], and [WPA2-PSK]. (p.14)
XWhen using an AirPort for communication in infrastructure mode, [Open system] is not
supported. Configure a [Shared key] on the transmitter. (p.14)
Are the transmitter and wireless LAN device configured with the same encryption
key for authentication?
XThe setting is case-sensitive, so check upper- and lower-case characters. Make sure the
correct encryption key for authentication is entered on the transmitter and wireless LAN
device. (p.15)
If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN device?
XRegister the transmitter’s MAC address (p.48) on the wireless LAN device.
Are the transmitter and wireless LAN device configured for the same encryption
method?
XThe transmitter supports these encryption methods: [WEP], [TKIP], and [AES]. (p.14)
If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN device?
XRegister the transmitter’s MAC address (p.48) on the wireless LAN device.
62: No response from wireless LAN terminal
63: Wireless LAN authentication failed
64: Cannot connect to wireless LAN terminal
81
Responding to Error Messages
8
Troubleshooting
Are any obstacles blocking the line of sight between the transmitter and the
antenna of the wireless LAN device?
XMove the antenna to a position clearly visible from the point of view of the transmitter.
(p.83)
The wireless LAN connection was lost, for some reason, and the connection
cannot be restored.
XThe following are possible reasons: excessive access to the wireless LAN device from
other terminals, a microwave oven in use nearby, or poor weather. (p.83)
Are the transmitter and wireless LAN device configured with the same encryption
key for authentication?
XThe setting is case-sensitive, so check upper- and lower-case characters. Make sure the
correct encryption key for authentication is entered on the transmitter and wireless LAN
device. (p.15)
Note that if the authentication method is [Open system], an Error 41 (“Cannot connect to
FTP server”) is displayed.
Are the transmitter and wireless LAN device configured for the same encryption
method?
XThe transmitter supports these encryption methods: [WEP], [TKIP], and [AES]. (p.14)
If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN device?
XRegister the transmitter’s MAC address (p.48) on the wireless LAN device.
65: Wireless LAN connection lost
66: Incorrect wireless LAN encryption key
67: Incorrect wireless LAN encryption method
82
Responding to Error Messages
Is the LAN cable securely connected?
XReconnect the LAN cable between the transmitter and server. Because the cable may be
severed, try using another cable to connect the devices.
Is the hub or router on?
XTurn on the hub or router.
Is the server on?
XTurn the server on. The server may have been turned off because of an energy-saving
mode.
Another problem has occurred, identified with an error number other than 11 to 81.
XRestart the camera.
81: Wired LAN connection lost
99: Other error
83
8
Troubleshooting
When using the transmitter with a wireless LAN, try the following corrective actions if the
transmission rate drops, the connection is lost, or other problems occur.
When using the transmitter indoors, install the wireless LAN device in the same room
where you are shooting.
Install the wireless LAN device higher than the transmitter.
Install the device where people or objects do not come between it and the camera.
Install the device as close as possible to the camera. In particular, note that during
outdoor use in poor weather, rain may absorb radio waves and disrupt the connection.
If the transmission rate over a wireless LAN drops because of interference from the following
electronic devices, switching to a wired LAN can resolve the problem.
The transmitter communicates over wireless LANs using radio waves in the 2.4 GHz
band. For this reason, the wireless LAN transmission rate may drop if there are nearby
microwave ovens, cordless telephones, microphones, or similar devices operating on the
same frequency band.
If a wireless LAN device on the same frequency band as the transmitter is used nearby,
the transmission rate of the wireless LAN may drop.
If multiple transmitters are connected to a single wireless LAN device, be careful not to
use duplicate camera IP addresses.
Note that the transmission rate drops when multiple transmitters access a single wireless
LAN device.
To reduce radio wave interference when using multiple transmitters and wireless LAN
devices in the same area, it is advisable to use three groups of devices or fewer. In this
case, leave a gap of four channels between each wireless LAN channel. For example,
use channels 1, 6, and 11; or channels 2, 7, and 12; or channels 3, 8, and 13.
Wireless LAN radio waves can be easily intercepted. For this reason, we recommend
activating encrypted communication in the wireless LAN device settings.
Wireless LAN Notes
Wireless LAN Device Installation and Antenna Position
Nearby Electronic Devices
Using Multiple Transmitters
Security
84
Click the Windows [Start] button [All Programs] [Accessories] [Command Prompt].
Type ipconfig/all and press the <
Enter
> key.
The IP address assigned to the computer is displayed, as well as the subnet mask, gateway,
and DNS server information.
To avoid using the same IP address for the computer and other devices on the network when
configuring the IP address assigned to the camera (page 16), change the rightmost numbers
here.
In Mac OS X, open the [Terminal] application, type ifconfig -a, and press the <
Return
> key.
The IP address assigned to the computer is indicated in the [en0] item by [inet], in the format
***.***.***.***.
To avoid using the same IP address for the computer and other devices on the network when
configuring the IP address assigned to the camera (page 16), change the rightmost numbers
here.
* For information on the [Terminal] application, refer to the Mac OS X help.
Checking Network Settings
Windows
Macintosh
85
9
Reference
86
You can configure the wireless or wired LAN settings by using the software provided with the
camera, WFT Utility. This is convenient if you want to create a wireless or wired LAN settings
file when the camera and transmitter are not nearby.
WFT Utility also enables you to create captions for attachment to images before transfer via
FTP.
Start WFT Utility from EOS Utility.
In EOS Utility, access [Accessories] to start WFT Utility.
Click the tabs for the transmitter’s [TCP/IP settings], [FTP settings], and [Wireless LAN
settings] and complete the required settings for a wireless or wired LAN connection.
Settings available here are the same as settings on the camera, with the addition of settings
for creating captions.
WFT Utility (Software)
Starting WFT Utility
Using Wireless or Wired LAN Settings
87
WFT Utility (Software)
9
Reference
When setting the wireless LAN channel on the [Wireless LAN
settings] tab, first select [WFT-E2] or [WFT-E2A]. The WFT-E2
supports 13 channels, and the WFT-E2A, 11 channels.
Keep in mind that the WFT-E2A cannot be used on channels 12 and
13 as the [WFT-E2] can.
Settings files can be used as follows.
Setting the Wireless LAN Channel
Wireless or Wired LAN Settings Files
Open Open a settings file saved on the computer or a memory card.
Save
Save the settings file on the computer or a memory card. The [Settings
name] is used as the file name.
For instructions on applying a settings file on a memory card to the camera,
refer to page ***.
Apply settings to
camera
Apply the settings file to a camera. The camera and computer must be
connected with the USB cable.
Load settings from
camera
Load a settings file on the camera to the computer. The camera and
computer must be connected with the USB cable.
88
Follow these steps to create captions and register them on the camera, as introduced in
“Adding a Caption Before Transfer” (p.25). When creating and registering captions, use a
computer on which EOS Utility is installed.
Before you begin, attach the transmitter to the camera and use the USB cable provided
with the camera to connect the camera to the computer. For instructions on connecting the
camera to the computer with the USB cable and starting EOS Utility, refer to the Software
Instruction Manual (PDF) provided with the camera. Note that captions cannot be created for
cameras without an attached transmitter.
1Start EOS Utility and select [Camera
settings/Remote shooting].
XThe camera settings/remote
capture screen is displayed.
2On the [ ] tab, select [WFT Captions].
XThe screen for caption creation is displayed.
To acquire caption data stored on the camera,
select [Load settings].
3Enter the caption or captions.
Enter up to 31 characters (in ASCII format).
4Register the captions on the camera.
Select [Apply to camera] to register your new
captions on the camera.
Creating and Registering Captions
89
9
Reference
EOS Utility System Requirements
Windows
Operating system
Windows Vista (full version for 32-bit and 64-bit computers;
Starter Edition not supported), Windows XP (Professional or
Home Edition), or Windows 2000 Professional
Computer
Computer with one of the above operating systems preinstalled
and a USB port as a standard feature
Note: Operation not ensured on upgraded computers
Processor Windows Vista: Pentium processor, 1.3 GHz or faster
Windows XP or 2000: Pentium processor, 750 MHz or faster
RAM (memory) Windows Vista: Minimum 512 MB
Windows XP or 2000: Minimum 256 MB
Interface USB 1.1 to 2.0 Hi-Speed
Display Screen resolution: 1,024 x 768 pixels or more
Color quality: Medium (16 bit) or more
Macintosh
Operating system Mac OS X 10.3 to 10.4
Computer Macintosh computer with one of the above operating systems
installed and a USB port as a standard feature
Processor Minimum 400 MHz PowerPC G3, G4, G5, or Intel processor
RAM (memory) Minimum 256 MB
Interface USB 1.1 to 2.0 Hi-Speed, FireWire (IEEE 1394)
Display Resolution: 1,024 x 768 or more
Colors: Thousands or more
90
Type
Type: Image transfer accessory compatible with IEEE 802.11b/g wireless
LAN and Ethernet (wired LAN). Can be connected via USB to external
media and GPS devices.
Network protocols: FTP, PTP, and HTTP
Wireless LAN
Standards compliance: ARIB STD-T66 (Low-Power Data Communication System/Wireless
LAN System), IEEE 802.11b, and IEEE 802.11g
Transmission method: DS-SS modulation (IEEE 802.11b) and OFDM modulation (IEEE
802.11g)
Transmission range: Approx. 150 m / 492 ft.
* With no obstructions between the transmitting and receiving
antennas and no radio interference
* With a large, high-performance antenna attached to the wireless LAN
access point
Transmission frequency: WFT-E2: 2,412 - 2,472 MHz (central frequency, 13 channels total)
WFT-E2A: 2,412 - 2,462 MHz (central frequency, 11 channels total)
Connection method: Infrastructure or ad hoc (IEEE 802.11b/g)
Security: Authentication method: Open, shared key, WPA-PSK, and WPA2-PSK
Encryption: WEP, TKIP, AES, and IPsec
Wired LAN
Standards compliance: IEEE 802.3u (Ethernet 100 Base-TX)
USB Connection
Connectable Devices: External media or GPS devices
Interfaces
Camera: Extension system terminal
Wired LAN: Ethernet RJ-45 port
External device: USB 2.0 Hi-Speed port (for connecting external media and GPS
devices)
Image Capture Capacity
Approx. number of images
* Using a fully charged LP-E4
* Testing based on Camera & Imaging Products Association (CIPA) standards
* Fewer images can be captured when transferring images over wireless
LAN.
* Fewer images can be captured when using bus-powered external media or
GPS devices.
Specifications
At Normal Temperature
(23°C / 73°F) At Low Temperature (0°C / 32°F)
1,400 1,100
91
Specifications
9
Reference
Power Source
None: Powered by the camera
Dimensions and Weight
Dimensions (W x H x D): 26 x 90 x 29 mm / 1.0 x 3.5 x 1.1 in.
Weight: Approx. 75 g / 2.7 oz.
Operating Environment
Temperature: 0°C - +45°C / 32°F - +113°F
Humidity: 85% or less
All preceding specifications are based on Canon testing standards.
Transmitter specifications and appearance are subject to change without notice.
92
93
9
Reference
94
Statement on EC directive
Canon Inc. tímto prohlašuje, že tento CH91108 je ve shodČ se základními požadavky a dalšími pĜíslušnými
ustanoveními smČrnice 1999/5/ES.
Undertegnede Canon Inc. erklærer herved, at følgende udstyr CH91108 overholder de væsentlige krav og
øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt Canon Inc., dass sich das Gerät CH91108 in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab Canon Inc. seadme CH91108 vastavust direktiivi 1999/5/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, Canon Inc., declares that this CH91108 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Por medio de la presente Canon Inc. declara que el CH91108 cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ Canon Inc. ǻǾȁȍȃǼǿ ȅȉǿ CH91108 ȈȊȂȂȅȇĭȍȃǼȉǹǿ ȆȇȅȈ ȉǿȈ ȅȊȈǿȍǻǼǿȈ
ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ 1999/5/ǼȀ.
Par la présente Canon Inc. déclare que l'appareil CH91108 est conforme aux exigences essentielles et aux
autres dispositions pertinentes de la directive 1999/5/CE.
Con la presente Canon Inc. dichiara che questo CH91108 è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo Canon Inc. deklarƝ, ka CH91108 atbilst DirektƯvas 1999/5/EK bnjtiskajƗm prasƯbƗm un citiem ar to
saistƯtajiem noteikumiem.
Šiuo Canon Inc. deklaruoja, kad šis CH91108 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Hierbij verklaart Canon Inc. dat het toestel CH91108 in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, Canon Inc., jiddikjara li dan CH91108 jikkonforma mal-㭝ti㭗ijiet essenzjali u ma provvedimenti
o㭝rajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, Canon Inc. nyilatkozom, hogy a CH91108 megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Niniejszym Canon Inc. oĞwiadcza, Īe CH91108 jest zgodny z zasadniczymi wymogami oraz
pozostaáymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Canon Inc. declara que este CH91108 está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Canon Inc. izjavlja, da je ta CH91108 v skladu z bistvenimi zahtevami in ostalimi relevantnimi
doloþili direktive 1999/5/ES.
Canon Inc. týmto vyhlasuje, že CH91108 spĎĖa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
Canon Inc. vakuuttaa täten että CH91108 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar Canon Inc. att denna CH91108 står I överensstämmelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Hér með lýsir Canon Inc. yfir því að CH91108 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru
í tilskipun 1999/5/EC.
Canon Inc. erklærer herved at utstyret CH91108 er i samsvar med de grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/EF.
95
9
Reference
FCC / IC Notice
Model WFT-E2A
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of this
device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be used with this equipment
in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop
operation of the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
The available scientific evidence does not show that any health problems are associated with
using low power wireless devices. There is no proof, however, that these low power wireless
devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF exposures have
not found any biological effects. Some studies have suggested that some biological effects
might occur, but such findings have not been con- firmed by additional research. WFT-E2A has
been tested and found to comply with FCC/IC radiation exposure limits set forth for an
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
Canon U.S.A Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
This class B digital apparatus complies with Canadian ICES-003.
96
A
Account ..................................................... 40
Ad hoc ....................................................... 14
AES ........................................................... 14
Areas of use ................................................ 6
Authentication............................................ 14
Auto setting ............................................... 16
Automatic transfer ..................................... 22
B
Batch transfer ................................ 26, 28, 29
C
Caption ...................................................... 88
Captions, adding before
transfer ...................................................... 25
Channel ............................................... 14, 87
Confirm settings ........................................ 48
Connection wizard..................................... 12
D
Directory structure ..................................... 50
DNS address ............................................. 16
DNS server................................................ 20
E
Encryption ................................................. 14
Encryption key........................................... 15
EOS Utility ........................................... 33, 37
Error message........................................... 70
ESS-ID ...................................................... 14
F
FTP.................................................. 2, 13, 19
FTP server................................................. 20
G
Gateway .................................................... 16
H
HTTP ............................................... 2, 13, 39
HTTP account ........................................... 40
I
Image sel./transfer .................................... 26
Infrastructure............................................. 14
IP address..................................... 16, 20, 35
IPsec ......................................................... 50
K
Key format................................................. 15
Key index .................................................. 15
L
Login method ............................................ 21
Login name ......................................... 41, 42
M
MAC address ............................................ 35
Manual setting........................................... 16
O
Open system............................................. 14
Overwriting same file ................................ 50
P
Pairing....................................................... 34
Passive mode ........................................... 50
Password ............................................ 41, 42
Port No...................................................... 20
Protect settings ......................................... 50
Proxy server.............................................. 20
PTP ................................................. 2, 13, 33
R
Remote capture ............................ 33, 39, 43
Remote Live View shooting ...................... 37
Root folder ................................................ 21
S
Select folder .............................................. 21
Server name ............................................. 20
Set number ............................................... 21
Settings information,
managing .................................................. 47
Shared key................................................ 14
SSID.......................................................... 14
Subnet mask ............................................. 16
Wireless and Wired
LAN Functions
Index
97
Index
9
Reference
T
Target folder .............................................. 21
TKIP .......................................................... 14
Transfer destination................................... 32
Transfer history ......................................... 31
Transfer with SET...................................... 24
Transferring images,
automatic................................................... 22
Transferring images,
individual images....................................... 24
Transferring images,
specifying sizes or types ........................... 23
Troubleshooting......................................... 69
U
URL ........................................................... 42
V
Virtual keyboard ........................................ 18
W
Web browser ....................................... 39, 42
WEP .......................................................... 14
WFT Pairing Software ............................... 34
WFT Server ............................................... 42
WFT Utility................................................. 86
Wired LAN ................................................. 14
Wireless LAN............................................. 14
WPA2-PSK................................................ 14
WPA-PSK.................................................. 14
B
Backing up images .................................... 60
Backup ...................................................... 62
C
Coordinated Universal Time...................... 67
Copying images......................................... 59
E
Error message........................................... 70
External media ................................ 2, 53, 57
G
GPS ...................................................... 2, 66
GPS data .................................................. 67
GPS device ............................................... 65
P
Power management............................ 56, 68
Power supply ............................................ 56
Q
Quick backup ............................................ 61
R
Replace existing image............................. 60
S
Skip image and continue........................... 60
Storage ..................................................... 54
T
Troubleshooting ........................................ 69
U
USB connection .................................. 53, 65
Functions When
Connected via USB
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A. CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE, CANON EUROPA N.V.
AFRICA & Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands
MIDDLE EAST CANON COMMUNICATION & IMAGE FRANCE S.A.S.
12 Rue de l’Industrie 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8 I-20097 San Donato Milanese, Milano, Italy
CANON Schweiz AG
Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland
CANON GMBH
Zetschegasse 11, A-1230 Wien, Austria
CANON España, S. A.
C/Joaquín Costa, 41, 28002 Madrid, Spain
SEQUE Soc. Nac. de Equip., Lda.,
Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal
CENTRAL & CANON LATIN AMERICA, INC.
SOUTH AMERICA 703 Waterford Way, Ste. 400 Miami, FL 33126, U.S.A.
ASIA CANON (China) Co., Ltd.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Startower Bldg.17F,737,Yeoksam-Dong, Kangnam-Ku, Seoul, 135-984, Korea
OCEANIA CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
CT1-7774E-000 © CANON INC. 2007
This instruction manual is current as of March 2007. For information on using the transmitter with
accessories introduced after this date, contact your nearest Canon Service Center.

Navigation menu