Canon K30316 Wireless LAN Module User Manual K30316 Ver2 1US
Canon Inc Wireless LAN Module K30316 Ver2 1US
Canon >
manual
6-Mar.-2009 Ver.2.1US Confidential K30316 Wireless LAN Module IEEE802.11b/g Product No. : K30316 Users Manual 1/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Document constituent list Control name General Items Absolute maximum ratings Electrical characteristics Circuit schematic Outline / Appearance Outline / Appearance Mounting Location of Module Control No. HD-AG-A****** HD-AM-A****** HD-AE-A****** HD-MC-A****** HD-AD-A****** HD-AD-B****** ******** Document Page 1/1 1/1 1/2-2/2 1/1 1/1 1/2-2/2 1/2-2/2 Rev. record 27-Jan.-2009> Ver.1.0 18-Feb.-2009> Ver.2.0 6-Mar.-2009> Ver.2.1 2/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. Control name HD-AG-A****** (1/1) General Items Scope This specification (“Specification”) applies to the hybrid IC “K30316” for use Wireless LAN module (“Product”). 1. 2. 3. 4. Product No. : K30316 Function: Radio frequency transfer Module. (IEEE802.11bg standard conformity) Application: Printer Structure: Hybrid IC loaded with silicon monolithic and GaAs semiconductor Ability of lead free mounting at customer's assembly (Heat resistance of this Product) : Yes Containment of hazardrous substance in this Product *This product conforms to RoHS Directive (2002/95/EC). 5. Outline: 6-pin Connector 6. Marking: Type, MAC address, Lot number 7. Features: -IEEE802.11b/g standard conformity Transmit speed: 11g (54/48/36/24/18/12/9/6Mbps) 11b (11/5.5/2/1 Mbps) Modulation: 11g (OFDM): BPSK, QPSK, 16QAM, 64QAM 11b (DSSS): BPSK, QPSK, CCK Channel Number: 1 to 11 channels Interface: USB Embedded ARM MPU for reducing loads on host processor Built-in EEPROM (8kbit), OSC (40MHz), Chip Antenna (Monopole antenna), Connector 8. Security: WEP (64/128bit), TKIP (WPA), AES (WPA2) 9. Packing: Packaging method: Trey 10. Notes: a. Any question arising from this Specification shall be solved through mutual discussion by the parties hereof. b. This Product is not designed for radiation durable and should not be used under the circumstance of radiation. c. The operating conditions of this Product are as shown in this Specification. d. This Product mentioned in this Specification is manufactured for use in Printer. This Product shall not be used in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added at design stage, all at the customer’s sole risk. e. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other ISM band at 2.4GHz products. f. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this Product around the other wireless devices. 3/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. HD-AM-A****** (1/1) Control name Absolute maximum ratings Absolute maximum ratings Item Symbol Min. Typ. Rating Max. Unit Vbus -0.3 6.0 -0.3 Vbus +0.3 PE Storage temperature range Tstg -40 100 Degrees C Operation range Topr -5 55 Degrees C Supply voltage temperature 25 Remark Recommendation operating range Item Supply voltage Note: 1. Symbol Min. Rating Typ. Max. Vbus 3.4 3.6 4.0 PE (SL) 0.2 PE (SH) 1.1 Vbus Unit Remark Operation temperature range is set to satisfy products electrical characteristics for a short period of time. Refer reliability condition to check the product life cycle if you use this module for a long period of time in the condition other than the Typ. standard. 4/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. HD-AE-A****** (1/2) Control name Electrical characteristics DC Specifications The Specification applies for Topr.= 25 degrees C, Supply voltage=Typical voltage No. Parameter Condition Operating Voltage 1 Operating Voltage 2 Power Enable *1 Symbol Min. Typ. Max. Unit Vbus 3.6 PE(SL) 0.2 PE(SH) 1.1 Vbus PEI SL -50 T1 500 T2 500 Remark uA ms Peak Current1 Ip1 370 mA Power consumption1 Continuous (11g/6Mbps) Pc1 943 1080 mW Power consumption2 Burst Tx (11g/54Mbps) Pc2 663 701 mW Duty 10.8% Power consumption3 Burst Rx (11g/54Mbps) Pc3 705 723 mW Power consumption4 Burst Tx (11b/11Mbps) Pc4 713 802 mW Duty57.3 % Power consumption5 Burst Rx (11b/11Mbps) Pc5 618 635 mW *1) Power Enable pin connected to the Vbus pin and pulled up with 100kohm inside of the module. 5/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. Control name HD-AE-A****** (2/2) Electrical characteristics RF Specifications (WLAN 11g/54Mbps, OFDM) The Specification applies for Ta=25 degrees C, Supply voltage =Typical voltage No. Parameter Condition Symbol Min Typ 1 RF frequency range FREQ 2412 2 TX Power Po 10 12 1st Side Lobe M1 3 Spectrum Mask 2nd Side Lobe M2 rd 3 Side Lobe M3 Symbol clock tolerance Frequency tolerance EVM TX Out of band spurious1 TX Out of band spurious2 10 11 12 Rx sensitivity Maximum Input Level RX Out of band spurious1 RX Out of band spurious2 RMS f<2387MHz, 2496.5MHz1GHz Max Unit Remark 2462 MHz 14 dBm -20 dBc -28 dBc -40 dBc Ft -25 25 ppm Ft EVM -25 25 5.6 ppm TOS1 2.5 uW TOS2 25 uW SEN MIL ROS1 ROS2 -20 -65 20 dBm dBm nW nW -71 RF Specifications (WLAN 11b/11Mbps, CCK) The Specification applies for Ta=25 degrees C, Supply voltage=Typical voltage No. Parameter Condition Symbol Min Typ 1 RF frequency range FREQ 2412 2 TX Power Po 11 13 st 1 Side Lobe M1 3 Spectrum Mask 2nd Side Lobe M2 Power up TU 4 Power up-down rump Power down TD 5 Frequency tolerance Ft -25 6 EVM Peak EVM f<2387MHz, 7 TX Out of band spurious1 TOS1 2496.5MHz 1GHz ROS2 Max Unit Remark 2462 MHz 15 dBm -30 dBc -50 dBc us us 25 ppm 35 2.5 uW 25 uW -76 dBm dBm nW nW 20 6/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. HD-MC-A****** (1/1) Control name Circuit Schematic Connector Block Diagram 7/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. HD-AD-A****** Control name Outline/Appearance (1/1) OUTLINE Unit: mm 8.0 24.3+/-0.3 30.0+/-0.3 GND Power_Enable USB D+ USB DVBUS GND 4.3 4.3Max LABEL 8/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. HD-AD-B****** Control name Outline/Appearance (1/2) Indication label Unit: mm This label is consisted of two sheets. 2.5 Sheet1-front 4.0 3.3 19.5 5.0 6.9 2.5 (a) Product Number:K30316 FCC ID:AZDK30316 IC:498C-K30316 Nxxx 13.4 4.0 XXXXXXXXXXX 3.3 (c) MAC: (d) XXXXXXXXXXXX CANON INC. 4.0 XXXX (b) QK1-5700-DB01-01 (e) 3-R2.0 WLAN Module 3.3 7.5 XXXXXXXXXXXXXX Made in Japan (f) 19.5 3.3 9/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. HD-AD-B****** (2/2) Control name Outline/Appearance Material: PET (UL969)/ Label color: White 10/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. ****** (1/2) Control name Mounting Location of Module Mounting Location of Wireless LAN Module ( Example) Module is placed inside of the right corner of the printer. Wireless LAN Module 11/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Control No. ****** (2/2) Control name Mounting Location of Module How to attach the plate to the module: Front Screw When you install the module into your final set, please leave space between the module and the metal plate more than 4mm. (Except the screw-hole areas.) Please do not place metal plate around the antenna area for antenna performance. 12/16 6-Mar.-2009 Ver.2.1US Confidential K30316 FCC Regulatory Information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may Cause undesired operation. Canada Regulatory Information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. 13/16 6-Mar.-2009 Ver.2.1US Confidential K30316 R&TTE Directive Information This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. For Italy and France, this device may be limited to USE INDOOR only. Hereby CANON INC. declares that this Wireless LAN Module (Model No.: K30316) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of Conformity may be obtained at; CANON INC. 451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan Telephone No.) 81-44-542-0164; Fax No.) 81-44-548-7524 CAUTION - Please note that this users manual should not be provided to end-users. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the requirement. 14/16 6-Mar.-2009 Ver.2.1US Confidential K30316 Notice - At the installation of our Wireless LAN Module (Model No.: K30316) into the device, following information should be provided with end-user under the responsibility of the manufacture who integrates it into their device. The following sentence has to be displayed on the outside of the device in which the module is installed: "Contains Transmitter Module FCC ID: AZDK30316 / IC ID: 498C-K30316", or "Contains FCC ID: AZDK30316 / IC ID: 498C-K30316" FCC Regulatory information CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may Cause undesired operation. Canada Regulatory information Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. CAUTION: This device should be used in separation distance of at least 20 centimeters maintained between transmitter’s radiating structure and the body of the user or nearby persons. R&TTE Directive information This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. For Italy and France, this device may be limited to USE INDOOR only. Hereby [Name of manufacture(*)], declares that this [type of equipment(*)] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (*) Note: Please write in your company name and type of equipment into [ ]. 15/16 6-Mar.-2009 Ver.2.1US Confidential K30316 NCC Regulatory information 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用, 並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射 頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Note: 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤 2. 系統廠商應於平台上標示「本產 品內 含射頻模組: XXXyyyLPDzzzz-x (NCC ID) 」字樣 NTC Regulatory information This telecommunication equipment conforms to NTC technical requirement. 16/16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Page Count : 16 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:0f4e43d4-d506-47be-92b8-1726f98274b5 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2009:03:06 16:30:36+09:00 Create Date : 2009:03:06 16:28:39+09:00 Metadata Date : 2009:03:06 16:30:36+09:00 Document ID : uuid:958a0c04-712b-44a9-abde-57240069a1e3 Format : application/pdf Title : Microsoft Word - K30316_User Manual_Ver2.1US.doc Creator : cmp31045 Author : cmp31045EXIF Metadata provided by EXIF.tools