Cardionet 1009 C3 monitor User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	741222
Application ID	NHMZA2O7dD+R6xWxiOxWGw==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.13kB (1314084 bits)
Date Submitted	2006-12-21 00:00:00
Date Available	2006-12-22 00:00:00
Creation Date	2006-11-16 17:32:10
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2006-11-16 17:36:53
Document Title	User Manual 2
Document Creator	Adobe InDesign CS2 (4.0.2)

123
How to Install the CardioNet Base
Find your phone cord
Plug phone cord into base
Find an electrical outlet
located
close
to
telephone jack, preferably
in your bedroom.
Locate the telephone cord
plugged into the back
of your home phone.
Unplug the telephone
cord from the back of
your telephone.
On the CardioNet base,
locate the slot labeled
“Phone In” on the back
of the base. Take the
telephone cord you just
unplugged from the back
of your phone and plug it
into the slot on the base
labeled “Phone In”.
2 . GE T T I NG STA RT E D
Look for outlet and jack
Pick up the receiver of
your home phone and
listen to ensure there is a
dial tone.
12
Getting Started
45
How to Install the CardioNet Base
Plug in power cord
In the CardioNet kit,
find the telephone cord.
Locate the slot labeled
“Phone Out” on the back
of the base. Plug one end
of this telephone cord
into the slot on the base
labeled “Phone
Out”.
Plug the other end of this
cord into the back of your
telephone.
In the kit, locate the power
cord. On the back of the
base, locate the round
hole labeled “Power”. Plug
the small, round end of the
power cord into the slot on
the base labeled “Power”.
Plug the other end into
an electrical outlet.
2 . GE T T I NG STA RT E D
Plug in second phone cord
Check your home phone
for a dial tone.
Getting Started
13
About the CardioNet Base
The Base Recharges your Monitor
The base functions as a recharging station for your CardioNet monitor. When you
insert the monitor into the base correctly, “Monitor is Charging” will appear on the
screen. The monitor’s rechargeable battery provides between 12 to 16 hours of use.
If you plan to be away from home for more than 12 hours, you should bring one
of the black power cords with you. At some point during the day, plug the power
cord into an electrical outlet and charge your monitor by inserting the other end of
the power cord into the hole on the side of the monitor.
2 . GE T T I NG STA RT E D
The Base Transmits Events Using your Home Telephone
When your CardioNet monitor is in the base, it uses your home telephone system
for communications with the CardioNet Monitoring Center. When you are away from
home – or whenever your CardioNet monitor is out of the base station – the monitor
uses cell phone technology to contact the CardioNet Monitoring Center and transmit
data. You do not need a cell phone. The monitor uses its own cell phone.
As with consumer cellular phones, calls can sometimes be delayed or blocked by
coverage problems, heavy traffic on cell phone networks, or physical obstructions
such as buildings or mountains.
If the CardioNet monitor has data to transmit and is unable to communicate with
the CardioNet Monitoring Center through cellular communications, the monitor will
store the data and transmit it when cell coverage becomes available or through
your home telephone system when the monitor is placed in the base.
If you pick up your telephone while the monitor is in the base and transmitting
data, you will hear static, like the sound a fax machine makes. Hang up the phone
and wait a few minutes while the data is sent and then you will get a dial tone. If
you must use your phone and the monitor is transmitting data, take the monitor
out of the base and make your call. When you are done with the call, however, you
should return your monitor to the base right away to complete the transmission.
If you are on the phone and the monitor wants to transmit data, you might hear
clicking sounds. If you are using a dial-up connection to access the Internet on the
same phone line as the base, and the monitor is in the base transmitting data, it
may disconnect you from the Internet. Hang up and the monitor will transmit the
data. When the monitor is in the base and transmitting data, your telephone line
will have a busy signal for incoming calls. You will not be charged for any calls your
monitor makes to CardioNet.
14
Getting Started
How to Activate the CardioNet Sensor
The table below will help you gather all the items you will need to begin using your
CardioNet sensor. All items are located in your CardioNet kit.
Items You’ll Need to Begin Using your CardioNet Sensor
Item and Quantity
Picture of Item
Kit Location
Place shipper kit
image here
CardioNet Sensor
2 . GE T T I NG STA RT E D
Place shipper kit
image here
AA Battery
Place shipper kit
image here
Pack of Electrode Pads
Place shipper kit
image here
Neck Strap or Belt Clip
Getting Started
15
123
How to Activate the CardioNet Sensor
Belt clip or neck strap?
Prepare your skin
Lift the lid of your sensor
and place one AA battery
inside. Use the diagram
on the inside of the
sensor to make sure you
insert the battery with
the proper positive and
negative orientation. If
you have inserted the
battery correctly, you will
hear a chime.
Neck strap: unsnap the
neck strap and thread it
through the loop on the
sensor. Snap the ends
together and place it over
your head. The 2 tabs
allow you to adjust the
length of the strap.
Belt clip: attach the clip to
your pants, skirt or belt.
Snap the flat side of the
sensor into the clip with
the wires pointing upward.
First make sure you do not
have any lotion, powder or
hair in the three locations
(steps 4-6). If you have
lotion or powder on, you
should wash off the areas
with soap and water and
dry the skin completely. If
you have any hair in these
locations, you must shave
it all off before putting the
electrodes in place.
2 . GE T T I NG STA RT E D
Insert the AA battery
16
Getting Started
456
How to Activate the CardioNet Sensor
Black on left
Red on ribs
Open one pack of electrodes. Snap the 3 leads
(from the end of your
sensor wires) onto the 3
electrodes. Peel off the
electrode from the backing with the WHITE lead
attached. Place this electrode just below the center
of your right collarbone.
Press so that the electrode
is adhered to your skin.
Peel off the electrode
from the backing with
the BLACK lead attached.
Place this electrode just
below the center of your
left collarbone. Press so
that the electrode is adhered to your skin.
Peel off the electrode from
the backing with the RED
lead attached. Place this
electrode on your left side,
on the lower part of your
rib cage. RED on ribs.
Press so that the electrode
is adhered to your skin.
Getting Started
2 . GE T T I NG STA RT E D
White on right
17
Tips for Wearing the CardioNet Sensor
How the Electrodes Work
The CardioNet sensor uses three electrode pads, carefully placed on your body to
detect heartbeats by sensing electrical changes on the surface of your skin. The
electrode pads are attached to three leads - a white lead, a black lead and a red lead.
The leads can be snapped on and off the electrodes. This allows you to take off the
leads and sensor before showering – without removing the electrode pads.
2 . GE T T I NG STA RT E D
It is very important that you follow the instructions in Chapter 4: Changing Your
Electrodes. By following these instructions carefully you are providing CardioNet
with a clear reading of your heartbeats while maintaining the health of your skin.
If You Experience Skin Irritation
If you experience skin irritation or a rash or at any time you experience discomfort
wearing the electrodes, please contact CardioNet at 1-866-426-4401.
18
Getting Started
How to Activate the CardioNet Monitor
Before proceeding, please contact a CardioNet Customer Service Representative at
1-866-426-4401. The table below will help you gather all the items you will need to
activate your CardioNet monitor. All items are located in your CardioNet kit.
Items You’ll Need to Activate your CardioNet Monitor
Item and Quantity
Picture of Item
Kit Location
Place shipper kit
image here
CardioNet Monitor
2 . GE T T I NG STA RT E D
Sensor Attached
The sensor should be
attached to your body.
Place shipper kit
image here
Patient Enrollment Form
to sign
Getting Started
19
123
How to Activate the CardioNet Monitor
Received Privacy Practices
Agree to Return Equipment
Switch the power switch
on the green/on position. Wait for the monitor
to power up. Activation
screen 1 will appear. Your
name should appear on
the screen.
Activation screen 2 is
shown.
Activation screen 3 is
shown.
In the blue folder in your
kit, locate “CardioNet’s Notice of Confidentiality and
Privacy Practices”.
Touch Yes to indicate
that you agree to return
your CardioNet kit and all
its contents immediately
after your monitoring is
complete.
2 . GE T T I NG STA RT E D
Confirm name and sensor
Look at the back of your
sensor. The 5 digit SNV
number should match the
number on this screen.
Touch Yes to proceed.
20
Getting Started
Touch Yes to indicate that
you have received this
document.
456
How to Activate the CardioNet Monitor
Agree to Share Data
Call CardioNet
Activation screen 4 is
shown.
Activation screen 5 is
shown.
Activation screen 6 is
shown.
In your kit, locate the “Patient Enrollment Form.”
Touch Yes to indicate your
consent to allow CardioNet
to use your data for
research purposes. Your
identity will not be used
and will be kept private.
If you are not already
speaking with a Customer
Service Representative,
please call CardioNet at
1-866-426-4401.
Touch Yes to indicate
that you agree with the
Terms and Conditions on
the form.
2 . GE T T I NG STA RT E D
Agree to terms
Touch Continue on your
screen to proceed.
Getting Started
21
789
How to Activate the CardioNet Monitor
Activating... stand by
Activation screen 7 is
shown.
The Activating Monitor
screen appears.
2 . GE T T I NG STA RT E D
Enter password
While you are talking with
our Customer Service Representative, they will give
you a password to enter.
Enter the password and
touch Enter to continue.
Place the monitor in the
base. You may need to
hang up the phone now.
22
Getting Started
Activated.
When the monitor has
connected and activation
During this time, your is complete, the Activation
monitor is attempting to S u c c e s s f u l s c r e e n i s
connect with the center and shown.
activate your prescription. To u c h C o n t i n u e t o
This could take several proceed and begin the
minutes.
process of recording a
If activation fails, a screen baseline ECG.
containing instructions will
appear (see page 25).
123
How to Activate the CardioNet Monitor
Record baseline
Recording... remain still
Before you begin recording
your baseline ECG, find
a comfortable place to
sit or lay down. When
you are comfortable press
Continue on the screen.
When you are comfortable and are certain you
can remain still for up to
2 minutes, press Record
Baseline on the screen.
While your baseline ECG
is recording the screen
will show you a blue bar
to indicate your progress.
Please wait and remain
still unitl this screen
changes.
Getting Started
2 . GE T T I NG STA RT E D
Prepare to record
23
45
How to Activate the CardioNet Monitor
Begin monitoring
Once your baseline ECG
has been recorded,
the Baseline Recorded
confirmation screen wil
appear. Press Continue
to go to the Main Menu.
The Main Menu screen
is displayed. You are
now ready to begin your
monitoring session with
CardioNet.
2 . GE T T I NG STA RT E D
Baseline Recorded
24
Getting Started
How to Activate the CardioNet Monitor
If
Activation
Fails
If
You
Disagree
Need
Assistance?
2 . GE T T I NG STA RT E D
If the monitor is unable to
connect to the CardioNet
center, the activation will
fail.
If you disagree with any of
the Activation screens you
may choose No. However,
if you do not consent
If the “Activation failed” to all of the Activation
s c r e e n a p p e a r s , d o screens, CardioNet may
not proceed until you not be able to provide
have called CardioNet’s monitoring to you. Please
Customer Service at 1- call CardioNet at 1-866426-4401 to discuss your
866-426-4401.
options. Please do not call
your physician.
If you have questions or
need assistance at any
time, call CardioNet toll
free at 1-866-426-4401.
Getting Started
25


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2006:11:16 17:36:53-06:00
Create Date                     : 2006:11:16 17:32:10-06:00
Metadata Date                   : 2006:11:16 17:36:53-06:00
Creator Tool                    : Adobe InDesign CS2 (4.0.2)
Format                          : application/pdf
Document ID                     : uuid:c3f594e3-e03e-4a2f-9d82-afbef1f80583
Instance ID                     : uuid:1d9ac396-21b0-4a31-85d9-cac5ebf7f455
Producer                        : Adobe PDF Library 7.0
Has XFA                         : No
Page Count                      : 15
Creator                         : Adobe InDesign CS2 (4.0.2)

EXIF Metadata provided by EXIF.tools