Cardo Systems ER14 Bluetooth headset User Manual QG G9 EN

Cardo Systems, Inc. Bluetooth headset QG G9 EN

manual

User GuideG9 / G9 PowerSet™4**0$1%22.-LQGE $0
CONTENTS  1.  INTRODUCTION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3  2.  CHARGING THE SCALA RIDER G9® . . . . . . . . . . . . . . . . . . . . . . . . .  4  3.  CARDO COMMUNITY™ PLATFORM AND “ONE+8” INTERCOM . . .   5  4.  GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5   4.1  MOUNTING THE SCALA RIDER G9 ON YOUR HELMET . . . . . . . .   5   4.2 GENERAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10   4.3 STATUS LIGHTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10   4.4 AUDIO SOURCES AND PRIORITIES  . . . . . . . . . . . . . . . . . . . . . . . . . . . 11   4.5 VOICE COMMAND  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11   4.6 SETTINGS CUSTOMIZATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11   4.7 VOICE MENU   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  5.  INTERCOM CONFIGURATION: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12   5.1 “ONE+8” INTERCOM TOGGLING MODE . . . . . . . . . . . . . . . . . . . . . . 13   5.1a  CONFIGURING YOUR G9 BUDDY NAME . . . . . . . . . . . . . . . . . . 13   5.1b  HEARING YOUR ASSIGNED NAME . . . . . . . . . . . . . . . . . . . . . . . 13   5.1c  PAIRING WITH A “ONE+8” INTERCOM BUDDY . . . . . . . . . . . . . 13   5.1d  PAIRED DEVICE INDICATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14   5.2 INTERCOM CONFERENCE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14   5.2a  TWO-WAY INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14   5.2b  THREE-WAY INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15   5.2c  FOUR-WAY INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.3 CLICK-TO-LINK® INTERCOM MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  6. USING THE INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17   6.1. MAKING TWO-WAY INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . . . 17   6.2 MAKING THREE-WAY INTERCOM CALLS  . . . . . . . . . . . . . . . . . . . . . 18   6.3 MAKING FOUR-WAY INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . .18   6.4 USING CLICK-TO-LINK INTERCOM  . . . . . . . . . . . . . . . . . . . . . . . . . . . .18   6.5 RECEIVING INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19   6.6 BUSY SIGNAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19   6.7 GROUP SIGNAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19   6.8 VOICE CONNECT (VOX) SETTINGS  . . . . . . . . . . . . . . . . . . . . . . . . . . .19  7.   PAIRING AND USING A MOBILE PHONE, GPS ORMP3 PLAYER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20   7.1. MOBILE PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20   7.1a  PAIRING A MOBILE PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20   7.1b  MAKING AND RECEIVING PHONE CALLS . . . . . . . . . . . . . . . . .20   7.1c  HOT DIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21   7.2. PAIRING A GPS DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21   7.3 MUSIC STREAMING VIA A2DP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21   7.3a  PAIRING TO AN A2DP MUSIC PLAYER . . . . . . . . . . . . . . . . . . . . 21   7.3b  LISTENING TO MUSIC VIA A2DP   . . . . . . . . . . . . . . . . . . . . . . . .22   7.4 CABLE-CONNECTED MP3 PLAYERS  . . . . . . . . . . . . . . . . . . . . . . . . . .22   7.4a   CONNECTING YOUR MUSIC PLAYER VIA THE AUX . . . . . . . .22   7.4b  LISTENING TO MUSIC VIA THE AUX  . . . . . . . . . . . . . . . . . . . . .22  8.  FM RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22   8.1 GENERAL FUNCTIONS   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22   8.2 RADIO TUNING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23   8.3 AUTOMATIC RADIO TUNING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23   8.4 RDS (ALTERNATIVE FREQUENCIES)  . . . . . . . . . . . . . . . . . . . . . . . . . .23  9.  TROUBLESHOOTING CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . .2410.  SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2411.  NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24IMPORTANT: This is version 1.1 of the User Manual. Please note, that our manual is periodically updated on the Cardo website to include the very latest features and functions of your new scala rider G9.Please visit www.cardosystems.com/download/manuals to check if the manual you are holding is the most updated version and to download the manual in your preferred language.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
1. INTRODUCTIONThank you for choosing the scala rider G9® Bluetooth® communication and entertainment system for motorcycle helmets. This manual will help you set up, congure and operate the scala rider G9. If you have purchased the G9 PowerSet™, your retail box contains two factory-paired scala rider G9 units.Among others, the scala rider G9 oers the following key features:INTERCOM OPTIONS•  Intercom Conference mode between 2, 3 or 4 riders at a range of up to 1 mile /1.6 km*•  Click-to-Link® Intercom: For spontaneous connection with otherscala rider G9 or G4 user nearby• “One+8” Intercom Toggling with 8 additional buddiesMULTIPLE DEVICE CONNECTIVITY•  Bluetooth Mobile phone / GPS device•  Wireless A2DP/ MP3 connectivity for stereo music (cable option also provided)ENTERTAINMENT OPTIONS•  Wireless music streaming via devices supporting Bluetooth Stereo A2DP and AVRCP proles. • MP3 Players (non-Bluetooth) via cable• Built-in FM Radio with 6 station presets and automatic tuningCARDO COMMUNITY™ • Download software upgrades, enhancements and new features• Set up your “One+8” Intercom buddies• Create, nd and join riding tours• Customize your G9 settingsADVANCED TECHNOLOGY³Voice Command and  VOX technology:• Make / Receive mobile calls by voice command• Make / Receive intercom calls by voice command³AGC technology (Automatic Gain Control), allowing the automatic adjustment of volume according to ambient noise and driving speed. You can also control the volume level manually. AGC sensitivity levels can be customized to suit your personal preferences.³VOX technology and Voice Command for safe and hands-free operation of key functions. VOX sensitivity levels can be customized to suit your personal preferences.³PLC software (Packet Loss Concealment) for real-time compensation of audio losses in challenging environments.³Advanced software updates via any PC running Windows® XP™, Vista™ or Windows 7.³Spoken status announcements, so that you always know to whom or to what device you are connected.³Volume Per Mode: Volume is set and saved at dierent levels for each audio source.We wish you a great scala rider G9 experience and encourage you to write us at support@cardosystems.com with any questions, suggestions or comments you may have.*  Under tough environmental conditions (dense forest, narrow buildings, heavy trac), intercom range will be reduced. Once conditions improve, the range will increase again.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
CONTENTS OF RETAIL BOX NOTE: If you purchased the scala rider G9 PowerSet, your Retail Box will include two sets of each component listed below.G9 Audio KitInterchangeable exible boom (Corded mic also provided) SlidingPanelTwo speakersMP3 Jack (back)Noise canceling sealed omni microphonescala rider G9 UnitChannel A Button• Connect to Rider A• MP3 ButtonChannel B Button• Connect to Rider B• FM Radio ButtonVoice Command Button“One+8” Intercom•  Charging jack•  Software download portSilicone CoverVolume Down / Rewind buttonFlip-up AntennaMobile phone buttonVolume Up / Forward buttonIMPORTANT:The scala rider G9 has been certied as waterproof and dustproof (IP67). However, when in use, the silicon cover of the Charging Jack should be kept tightly closed to prevent moisture from entering the unit.Corded MicrophoneReplacement Mic sponges*Allen wrench Wall charger plugPre-moistened Towlettes $OFRKRO3DG USB adapter cableMP3 cable Velcro PadsCarry pouch Glue plate* The large microphone sponge is recommended for use with open helmets2. CHARGING THE SCALA RIDER G9Make sure that your scala rider G9 is fully charged for at least 4 hours before initial use.1. Open the silicone cover protecting the Charging Jack. 2.  Insert the USB cable into the Charging Jack. 3.  Insert the other end of the USB cable into the wall charger or a computer’s USB port.4.  While charging, the red LED turns on. When charging is complete, the red LED will turn o. scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
3.  CARDO COMMUNITY ONLINE PLATFORM AND “ONE+8” INTERCOMThe Cardo Community is one of the most remarkable and ground-breaking features of the scala rider G9. Visit http://community.cardosystems.com in order to get the following features: •  “One+8” Intercom: The scala rider G9 allows Intercom toggling with up to 8 other individual riders.Connect your G9 and your PC by inserting the USB cable into the computer’s USB port and the other end into the software download port of the G9 •  Download and install the latestsoftware upgrades•  Congure your own Buddy name (alias) for the “One+8” Intercom mode and personalize the settings of your G9 through your PC*•  Find your friends and add them to your “One+8” Buddy list•  Create and join tours and invite your friendsTo register, make sure to have your product serial number ready which can be found on the white label on the back of the unit. *System Requirements: Windows® XP™, Windows Vista™, or Windows 74. GETTING STARTED4.1 MOUNTING THE SCALA RIDER G9 ON YOUR HELMETGlue PlateSee “Using the Glue Plate” on next pageBack PlateSee “Using the Back Plate” on next page Glue the Audio Kit onto your helmet when the standard Back Plate method cannot be used.Method A Method BThe boom microphone can be used with open, half, full face and modular helmets.The corded microphone is for full face helmets.NOTE: scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
➋➌➊METHOD A: USING THE BACK PLATEPush the back plate between the helmet’s outer shell and inner paddingAdjust the clamp’s location so that the microphone is located opposite the center of your mouth.Loosen both screwsAllen WrenchBack Plate    ➊➋➍$OFRKRO3DGMETHOD B: USING THE GLUE PLATE (This can only be done once!)Tighten the screwsNOTE: Please read the entire section before proceeding. While we have no reason to believe that the gluing option might negatively aect any helmet, Cardo does not assume any responsibility to that eect, irrespective of its nature and circumstances. The Glue Plate is oered as an option that you may choose to use at your own risk and subject to renouncement of any future claims.Glue Plate  Allen Wrench   Pre-moistened     TowletteAdjust the audio kit’s location so that the microphone is located in front of the center of your mouth.Remove the Back Plate by taking out both screws with the Allen Wrench.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
➌➍➎➏ ➐$OFRKRO3DGFasten both screws tightlyPress here for 15 secondsPeel o protective backing sheetUse the Alcohol Pad to clean the exact spoton the helmetAllow the glue to dry for 24 hours$OFRKRO3DGPLACING THE SPEAKERSSpeaker velcro pad positionAudio Kit Velcro padsAttach Velcro Pads to inside of HelmetR LCross the long speaker wire over the center of the helmet to enhance FM radio reception.Using two speakers inside the helmet may be prohibited in certainjurisdictions. If this is the case, postion both speakers on one sideof the helmet. For best clarity, place speakers directly opposite and close to the ears. Helmets with deep recesses may require padding to bring the speakers closer for ideal positioning.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
➋➌➊➍NOTE:  The Corded Microphone can be used with Full face helmets only (not Modular helmets).Remove both screwsRemove the screwCHANGING THE MICROPHONE TYPERemovingAllen wrenchCorded microphone Velcro Pad➋➌➍➊Tighten the screwTighten the screwsCHANGING MICROPHONE TYPE (cont.)Attachingscala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
➋➊POSITIONING THE  MICROPHONEBoom MicrophoneCorded MicrophoneVelcro PadAdjust the Audio Kit’s location so that the microphone is located opposite the center of your mouth.Attach Velcro to inside front of helmet➌ ➍➋➊REPLACING THE CORDED MICROPHONE SPONGENOTE: A replacement corded microphone sponge is provided for future use should you need it. The wires to the microphone are delicate. Avoid touching them.Pinch and pullexisting microphonespongeRemove protective backing sheet from replacementspongeCarefully attachthe new spongeto the microphoneCarefully remove the existing sponge.  scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
ATTACHING AND REMOVING THE G9 FROM THE AUDIO KITpush! push! CLICK !4.2 GENERAL FUNCTIONSGENERAL FUNCTIONSPower ON Press and hold the Mobile Button for 2 seconds• Light: 3 BLUE ashes• Sound: Ascending tone Power OFF Press and hold the Mobile Button for 2 seconds• Light: 3 RED ashes• Sound: Descending tone VolumeAdjust and set volume of current audio sourceTap the Volume Up or Volume Down ButtonMute speakers Tap Volume Up and Volume Down buttons simultaneouslyBattery level indicator Press and hold the Volume Up Button for 2 secondsLight:• BLUE = Full charge• PURPLE = Half charge• RED = Almost empty4.3 STATUS LIGHTSLED Indication StatusNone scala rider G9 is OFF1 BLUE ash every 3 seconds Standby modeNo active audio sources2 BLUE ashes every 3 secondsActive mode – Call in progress / music or other audio source is ON1 RED ash every 3 seconds Standby mode – Battery is low2 RED ashes every 3 seconds Active mode – Battery is lowSolid RED Chargingscala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
4.4 AUDIO SOURCES AND PRIORITIESIf two connected audio sources try to play audio simultaneously, your scala rider G9 automatically determines which audio source to play through the speakers based on the priority of the connected devices.Higher Priority 1. Mobile Phone audio or GPS instructions* 2. Intercom/”One+8”/Click-to-Link3. A2DP (Stereo Bluetooth) audio4. FM Radio (Built-in)5. AUX (for corded connection i.e. Music Players)*GPS instructions from Smartphone GPS Apps are prioritized like A2DP audioÏLower PriorityFor example:•  Incoming mobile phone calls interrupt ongoing intercom calls• Incoming intercom calls will interrupt ongoing A2DP music  Click-to-Link, Intercom and “One+8” calls have the same priority:  Click-to-Link requests will not interrupt any type of Intercom call in progress, and vice-versa.4.5 VOICE COMMANDThe G9 allows you to perform certain actions by simply using your voice. Using advanced Voice Recognition, you can control the G9 completely handsfree. The default Voice Command language is English. Other languages can be selected via the Cardo Community platform including German, French, Italian and Spanish (see section 3). Throughout this manual, features which are available via Voice Command are marked with the  icon.  VOICE COMMAND TABLE:1.  In Standby Mode (no call in progress), tap the Voice Command button or speak any word loudly to activate VOX2. Speak a Voice Command from the table below:Current Mode Desired Action Say this:Standby / FM / A2DP / AUX“One+8” Intercom Call* <<G9 Buddy Name>>*Intercom call with A or B “Call Intercom” Standby Start A2DP “Music ON”Turn on FM “Radio ON”FM Turn o FM “Radio OFF”A2DP Stop / Pause A2DP “Music OFF”*see Section 5.1 for detailsNOTE: Voice Command performance may vary based on environmental conditions including driving speed, helmet type and ambient noise.For improved performance of the Voice Command feature, minimize wind impact on the microphone by using the large microphone sponge and closing the visor.4.6 SETTINGS CUSTOMIZATIONYour G9 oers various customizable settings, allowing you to personalize it according to your preferences. Among these settings, you can:•  Enable/Disable Spoken Status Announcements, i.e. informing you about the respective connectivity status, like if you are in mobile phone or intercom mode, and conrm changes of such modes. By default the feature is ON. scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
•  Set custom AGC and VOX sensitivity levels suited to your specic riding style and conditions. G9 settings can be customized in two ways:•  Via the Cardo Community platform at http://community.cardosystems.com (requires Windows PC). See Section 3.•  Via the Voice Menu and the buttons on your G9 unit – see below.4.7  VOICE MENUThe Voice menu is available in several languages. 1.  While on standby, press and hold the Channel “A” button and Channel “B” button simultaneously for 2 seconds while on standby. 2.  After entering the menu, follow the voice instructions in English or choose your preferred language.5. INTERCOM CONFIGURATION The scala rider G9 allows Bike-to-Bike full duplex intercom communication at a range of up to 1 mile / 1.6 km (subject to terrain) with antenna open and within line of sight.Open the antennafor maximum rangeOpen the antennafor maximum rangePairing with another scala rider G9To chat with another scala rider device via Intercom, rst pair the scala rider G9 to the second device. Pairing is a one-time process. Once paired, the scala rider G9 will automatically recognize the second unit whenever it is within range.NOTE: If you have purchased the G9 PowerSet, the retail package contains two factory-paired units congured to communicate via their Channel A buttons.G9 Intercom Options        Click-to-Link  Spontaneous Intercom          4 Way Intercom Conferencing                                                                                      “One+8” Intercom Toggling                           Intercom communication is possible using one of the three Intercom modes:Section 5.1“One+8” Intercom Toggling Mode(scala rider G9 only)2-way Intercom conversations within a group of up to eight other “One+8” Buddies Section 5.2Intercom Conference Mode (all scala rider models)*Intercom Conferencing (2-way,  3-way and 4-way) (Channel “A” and “B”)Section 5.3Click-to-Link (scala rider G9 and G4 models)1-on-1 spontaneous intercom conversations with random scala rider users near you who are not already paired to your G9* Intercom Conference calls available only on G4 and G9 models.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
Intercom CompatibilityYour scala rider G9 is compatible with all scala rider intercom models for intercom calls. In addition, it is also compatible with the Schuberth SRC-System™. Intercom range with other models is limited to the distance of the device with the shorter range.For instructions on how to pair and use your scala rider G9 with other scala rider models, please visit www.cardosystems.com/compatibility.5.1 “ONE+8” INTERCOM TOGGLING MODEPair with up to 8 other G9 devices (“One+8” Buddies) and connect with one at a time by pronouncing their name.5.1a CONFIGURING YOUR G9 BUDDY NAME“One+8” Intercom Toggling allows you to connect to a “One+8” Buddy by simply saying the Buddy Name they assigned to their G9.IMPORTANT! Before using “One+8” Intercom, you should assign your G9 device(s) a Buddy Name, so that other “One+8” participants can call you by this name.If you change your G9 Buddy Name, you must Flash Pair again with your “One+8” Buddies for their G9 to receive your new Buddy Name.Visit the Cardo Community platform http://community.cardosystems.com to assign your G9 device’s Buddy Name using your PC. See Section 3 for more details.Until you assign a Buddy Name to your G9, it will be known by its generic “One+8” Buddy name, “scala rider”. “One+8” Intercom Buddies will be able to connect to your G9 by manually choosing your G9 from their “One+8” Intercom Buddy List (see Section 6.1: Option 2: Manual Mode).5.1b HEARING YOUR ASSIGNED NAMETo hear the name you have chosen for your G9: 1. Start with the G9 in Standby mode.2.  Simultaneously tap the Voice Command and Channel “B” buttons. 3.  You will hear the Buddy name of your G9 through the speakers.5.1c PAIRING WITH A “ONE+8” INTERCOM BUDDY Flash-Pairing™Use Flash-Pairing to add a new “One+8” Buddy within seconds.1.  Remove both G9 units from their Audio Kits and check they are in Standby Mode (slow single blue ashing). 2.  Bump the two G9 units gently against each other and hold them side by side. CLICK !CLICK !3.  If Flash-Pairing was successful, a purple light appears for 2 seconds.NOTE: If your scala rider G9 already has a full list of 8 paired “One+8” Intercom Buddies, pairing another buddy will replace the buddy that you have not spoken to for the longest time.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
 Pairing Online – Cardo Community®You can nd your friends and add them to your “One+8” Buddy list via the Cardo Community website at: http://community.cardosystems.com5.1d PAIRED DEVICE INDICATIONUse the Paired Device indication to quickly see which G9 units within a range of 60ft./20m are your “One+8” Intercom Buddies. 1. Press and hold the Voice Command button for 5 seconds.2.  If your G9 and another nearby G9 are paired as “One+8” Buddies, both your Purple lights will turn on for 2 seconds. 3.  If they aren’t paired as “One+8” Buddies, pair them in seconds using Flash-Pairing (see Section 5.1c).5.2 INTERCOM CONFERENCE MODEStart multi-party conversations using the Channel A and B buttons on your G9. This mode is suitable for 2, 3 or 4-way calls.Pairing between scala rider G9s can be done either via Flash-Pairing (see below) or by manually pairing the Channel A and B buttons as described in the following sections.INTERCOM CHANNELS AND PAIRING LED INDICATIONINTERCOM CHANNELPAIRING / CONNECTION BUTTONPAIRING MODE LED INDICATORSChannel “A” Channel “A” BUTTON Rapid RED ashingChannel “B” Channel “B” BUTTON Rapid BLUE ashing5.2a TWOWAY INTERCOMIf you have purchased the G9 PowerSet, both units are factory-paired and congured to communicate via their respective Channel “A” Buttons. If for any reason you have to pair them again, OR if you purchased a single scala rider G9 and wish to pair with a second unit to make Intercom calls, proceed as follows:METHOD 1:  Flash-Pairing with Channel A and B buttons1.  Remove two G9 units from the Audio Kits and verify they are in Standby Mode (slow single blue ashing). 2.  Tap the Channel button (“A” or “B”) on the rst G9 unit and the purple light begins ashing.3.  Tap the Channel button (“A” or “B”) on the second G9 unit and the purple light begins ashing.NOTE: Selecting a Channel that is already in use will override the existing paired device on that Channel with the newly-paired device.4.  Within 5 seconds of tapping a Channel button, bump the two G9 units gently against each other and hold them side by side. CLICK !CLICK !5.  If Flash-Pairing was successful, a purple light appears for 2 seconds.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
 METHOD 2: Manual Pairing with Channel A / B buttons1.  Check that both G9s are ON and in Standby mode (single BLUE ash every 3 seconds).2.  Choose a channel to pair the G9 unit (Channel “A” or “B”).NOTE: Selecting a Channel that is already in use will override the existing paired device on that Channel with the newly paired device.3.  Press and hold the chosen Channel Button (“A” or “B”) on the rst G9 for at least 5 seconds until the BLUE or RED LED begins ashing rapidly, indicating it is in Intercom Pairing mode (see Table in section 5.2).4.  Immediately repeat Steps 2-3 for the second G9 unit. Both units will now be in Intercom Pairing mode.5.   After a few seconds, both G9s will show a solid light for 2 seconds, indicating that they are paired, connected and ready to use.NOTE: If Pairing is not completed within two minutes, the G9 will return to Standby mode.5.2b THREEWAY INTERCOMIf you purchased the scala rider G9 PowerSet, both units are factory-paired and congured to communicate via their respective Channel “A” Buttons. To pair a third scala rider G9 use Channel “B”. To set up three-way intercom conference mode proceed as follows: Use Channel “B”Use Channel “A”Rider 2 Rider 3Rider 1Rider “1” is paired to Rider “2” and also to Rider “3”.PAIRING THREE SCALA RIDER G9 UNITS1.  Rider 1 pairs their device to Rider 2 using Channel “A” as described in section 5.2a. 2.  Rider 1 pairs their device to Rider 3 using Channel “B” as described in section 5.2a.The Three-Way Conference Intercom Pairing is now complete and ready to use.IMPORTANT: Three-Way Conference Mode ConsiderationsDuring a 3-Way Intercom Conference call with 2 other participants, Rider 1 will not be able to receive mobile phone calls or GPS navigation instructions as long as the call is in progress.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
5.2c FOURWAY INTERCOMTo set up four-way intercom conference mode proceed as follows: In this conguration the two passengers (numbered 2 and 4) are each using two Bluetooth connections:Passenger 2 is paired to Rider 1 and to Passenger 4Passenger 4 is paired to Rider 3 and to Passenger 2PAIRING FOUR SCALA RIDER G9 UNITS1.  Pair Rider 1 to Passenger 2 using Channel “A” (see section 5.2a).2.  Pair Rider 3 to Passenger 4 using Channel “A” (see section 5.2a).3.  Pair Passenger 2 to Passenger 4 using Channel “B” (see section 5.2a).The Four-Way Pairing is complete and ready to use.IMPORTANT: Four-Way Conference Mode Considerations During a 4-Way Intercom call, the two passengers who maintain two active connections simultaneously will not be able to receive mobile phone calls or GPS instructions as long as the conference call is in progress.5.3 CLICKTOLINK INTERCOM MODEClick-to-Link is a spontaneous, “social” feature of your G9.Use Click-to-Link to instantly initiate 1-on-1 intercom calls with other scala rider users near you, without those users already being paired to you. Think of it as a private Bike-to-Bike channel that you can set up on-the-go with other scala rider G9 or G4 users that you see along the way. The Click-to-Link feature can be disabled on your G9 eectively blocking any attempt by a third party to send a Click-to-Link request to you.ENABLE/DISABLE CLICKTOLINKThe feature can be turned on or o via the Voice Menu (see Section 4.7)NOTE: By default, Click-to-Link is DISABLED.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
6. USING THE INTERCOM6.1 MAKING 2WAY INTERCOM CALLSThere are two ways to start an intercom call with devices that are paired to your scala rider G9. OPTION 1: Voice Connect (VOX) Intercom Call  Use this for either “One+8” Intercom or 2-way Intercom Calls (Channel “A” or “B”) 1.  Speak any word loudly into the microphone to open the Intercom channel.2. When you hear the Voice Command tone, say:  • the name of a ”One+8” Intercom Buddy  i.e. “John Smith” •  or say “Call Intercom” to start an intercom call with Rider A and / or Rider B (subject to who is present)NOTE: VOX Intercom call with only Rider A or Rider B will end automatically after 30 seconds of silence.OPTION 2: Manual Mode Channel A button Connect to Rider AVoice Command button “One+8“ IntercomChannel B button Connect to Rider BUse this to start an Intercom call with either: • ”RIDER A” – tap Channel A button• ”RIDER B” – tap Channel B button• “One+8” Intercom Buddy – See table belowTo end a call tap the respective button again.“One+8” IntercomSAY THE NAME:ORCHOOSE THE NAME (from your Buddy List):   a.  Tap the Voice Command button   b.  Speak the name of the “One+8” Intercom Buddya.  Press and hold the Voice Command button for 2 secondsb.  The G9 plays the names of all pre-paired “One+8” Intercom buddies.c.  Once you hear the name of the Buddy you wish to call, tap the Voice Command button or speak any word loudly into the microphone.To cancel “One+8” Buddy List playback: Press and hold the Voice Command button for 2 seconds.NOTE: Voice Command performance may vary based on environmental conditions including driving speed, helmet type and ambient noise.For improved performance of the Voice Command feature, minimize the wind impact on the microphone by using the large microphone sponge and closing the visor.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
6.2 MAKING 3WAY INTERCOM CALLSTo start an Intercom Conference Call with Channel “A” and “B”: OPTION 1: Voice Connect VOX 1.  Speak any word loudly into the microphone to open the Intercom channel.2.  When you hear the Voice Command tone, say: “Call Intercom” to make an intercom call with Rider A and Rider B. OPTION 2: Manual Mode1. Add Channel “A”: Tap the Channel “A” Button2. Add Channel “B”: Tap the Channel “B” ButtonIf you are already in an Intercom Call with Rider A or B, you can add another rider (A or B) by tapping the respective button, or another rider can join the intercom call in the same way.To end Intercom Call press the respective Channel “A” or “B” Button. NOTE: 3 and 4-way intercom calls can only be made using Channel “A” and Channel “B”.6.3 MAKING 4WAY INTERCOM CALLSOnce you have successfully paired the four G9s as described in 5.2c. proceed as follows:1. Make sure all four G9s are in Standby mode.2.  Passenger 2 should tap Button “B” to initiate an Intercom call with Passenger 4. Wait until audio is heard on both G9s.3.  Rider 1 should tap Button “A” to initiate an Intercom call with Passenger 2.4.  Rider 3 should tap Button “A” to initiate an Intercom call with Passenger 4.Now the 4-way Intercom conference mode is established.6.4 USING CLICKTOLINK INTERCOMIf you want to… Perform this action:MakeClick-to-Link callsStart a Click-to-Link call request(search lasts up to 10 seconds)Double tap the Channel“A” ButtonEnd a Click-to-Link call /Cancel a Click-to-Link call requestTap the Channel “A” ButtonReceiveClick-to-Link callsAccept a Click-to-Link call When hearing the Click-to-Link ringtone:Tap the Channel “A” Button or Speak any word loudly to answer by VOXReject a Click-to-Link call While hearing the Click-to-Link ringtone:Remain silent until the ring tone stopsIf other scala rider users are nearby, your next Click-to-Link call may randomly connect to any of them.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
6.5 RECEIVING INTERCOM CALLS•  If another paired scala rider G9 tries calling you via Intercom, the call will begin almost instantly. •  If you receive a “One+8” intercom call from someone who is not in your Buddy list, you will hear a ringtone.    Tap the Channel “A” button to accept the Intercom call, or remain silent until the ringtone stops to reject the call.6.6 BUSY SIGNAL When attempting to establish an Intercom call with another device that is already busy, a busy signal will be heard. The G9 is busy while on a phone call, intercom call with Channels “A” and “B”, “One+8” intercom call or Click-to-Link call.6.7 GROUP SIGNAL Send an instant message to all paired G9s within a range of up to 350 m / 1,150 ft. The recipients will hear a “Signal!” voice announcement. To reach a maximum number of riders, the message is automatically forwarded to all paired G9s within the recipient’s range. In this manner the total range is extended to up to 1 km / 3,280 ft.Activating the Group Signal: Double tap the Voice Command button to send a Group Signal at any time. NOTE: The transfer of wireless signals is subject to multiple external factors. Therefore, users may use but should not rely on the Group Signal for emergency purposes.6.8 VOICE CONNECT VOX SETTINGSThe G9 oers VOX technology for safe and hands-free operation of some key functions.The VOX feature can be customized to adjust its sensitivity level. VOX activation for Intercom calls can also be disabled completely.You can choose between ‘Regular’ (default), ‘Low’ and ‘High’ VOX sensitivity. If you experience diculties starting a conversation using VOX, change the setting to ‘High’ via the Cardo Community website or directly on your G9 via the Voice Menu (see Section 4.6).ENABLE/DISABLE VOXPress and hold Volume Up and Down buttons simultaneously for 2 seconds.Feedback:• Enable: Blue ash for 2 seconds• Disable: Red ash for 2 secondsFor incoming calls, just pronounce loudly any word (e.g. “hello”). To reject an incoming call, remain silent for about 15 seconds. scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
7.  PAIRING AND USING A MOBILE PHONE, GPS OR MP3 PLAYERTo connect your scala rider G9 to a Bluetooth device you must rst pair them. Pairing is a one-time process. Once paired, the Bluetooth device and the scala rider G9 will automatically recognize each other whenever they are within range (10m / 33ft). Your scala rider G9 oers Multiple Device Connectivity (“MDC”) :³  Intercom with up to 10 other scala rider G9 units (Rider A, Rider B, and “One+8” Buddies)³  Bluetooth Mobile Phone / GPS device³ Bluetooth A2DP Music Player7.1 MOBILE PHONE• Make and receive calls•  Listen to Music via A2DP (with compatible phones)7.1a PAIRING A MOBILE PHONEIf using both a Bluetooth GPS and Mobile Phone, pair the mobile phone to the GPS device. See Section 7.21.  Turn on your mobile phone and make sure the Bluetooth function is activated.2.  Verify that the scala rider G9 is turned ON and in Standby mode. (single BLUE ash every 3 seconds).3.  Press and hold the Mobile Button for at least 6 seconds. The G9 will rst ash RED. Continue to hold the button until the RED and BLUE lights begin rapidly alternating.4.  Search for Bluetooth devices on your phone by following the phone’s instructions. Consult your phone’s User Manual for more information.5.  After a few seconds the phone will list “scala rider G9” as a discovered device. Select “scala rider G9” from the list.6. If prompted for a PIN or Passkey, enter 0000 (four zeros).7.  The phone will conrm that pairing has succeeded and the scala rider G9 will begin ashing slowly in BLUE.  NOTES:•  If Pairing is not completed within 2 minutes, the scala rider G9 will return to Standby mode.•  Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music (A2DP), even if the phone has an MP3 player function. Consult your mobile phone’s User Manual for more information.•  After pairing, you may need to tap the Mobile Button to connect the scala rider G9 to the phone.7.1b MAKING AND RECEIVING PHONE CALLSBASIC FUNCTIONSAnswer a call Tap the Mobile Button or speak any word loudly to answer by VOX Reject a call Remain silent for 15 seconds, or press and hold the Mobile Button for 2 seconds End a call Tap the Mobile Button Voice Dial* (if supported by mobile phone)Tap the Mobile Button and follow the prompt from the mobileRedial* Tap the Mobile Button twiceINTERCOM CONFERENCE MODEAdd/Remove Channel “A” to/from a callTap the Channel “A” button while on a phone callAdd/Remove Channel “B” to/from a callTap the Channel “B” button while on a phone call  *This feature is not available during intercom or mobile callsscala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
7.1c HOT DIALCall a pre-programmed phone number automatically at the push of a button. 1.  Congure your G9’s Hot Dial number via the Cardo Community at http://community.cardosystems.com. See Section 3 for more details.2.  To call your Hot Dial number, tap the Channel “A” and Channel “B” buttons simultaneously.7.2 PAIRING A GPS DEVICE• Receive GPS navigation instructionsNOTES:•  Not all Bluetooth GPS devices allow connections to Bluetooth audio devices. Please consult your GPS User Manual for more information. •  If Pairing is not completed within 2 minutes, the scala rider G9 will return to Standby mode.1. Turn on your GPS.2.  Verify that your G9 is turned ON and in Standby mode (single BLUE ash every 3 seconds).3.  Press and hold the Volume Up Button for at least 5 seconds, until the PURPLE light begins ashing rapidly.4.  Search for Bluetooth device on the GPS device by following the instructions in the GPS User Manual.5.  Once your GPS lists the scala rider G9 as a discovered device, select it.6. If prompted for a PIN or Passkey, enter 0000 (four zeros).7.   Your  GPS  will conrm  that  pairing  has  succeeded and  the scala rider G9  will begin ashing  slowly in  BLUE. IMPORTANT: If you wish to use a mobile phone and GPS device with the scala rider G9, pair the mobile phone directly to the GPS device.7.3 MUSIC STREAMING VIA A2DP7.3a PAIRING TO AN A2DP MUSIC PLAYER•  Listen to Stereo Music via A2DP (non-mobile phone device) NOTE: The scala rider G9 can also receive audio via the enclosed cable from non-Bluetooth MP3 Players or audio sources as described in section 7.4.1.  Turn on the Music Player and make sure that Bluetooth function is activated.2.  Verify that the scala rider G9 is turned ON and in Standby mode (single BLUE ash every 3 seconds).3.  Press and hold the Mobile Button for at least 6 seconds. The G9 will rst ash RED. Continue to hold the button until the RED and BLUE lights begin rapidly alternating.4.  Search for Bluetooth device on the Music Player by following the device’s instructions.5.  Once your Music Player lists the “scala rider G9” as a discovered device, select it.6. If prompted for a PIN or Passkey, enter 0000 (four zeros).7.  The Music Player may conrm that pairing has succeeded, and the scala rider G9 will begin ashing slowly in BLUE. scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
 NOTE: If Pairing is not completed within two minutes, thescala rider G9 will return to Standby mode.7.3b LISTENING TO MUSIC VIA A2DPBASIC FUNCTIONS Available only on AVRCP compatible Bluetooth audio sourcesPlay Press and hold the MP3 Button for 2 secondsPause/Stop Press and hold the MP3 Button for 2 secondsForward Press and hold the Volume Up Button for 2 secondsRewind* Press and hold the Volume Down Button for 2 seconds  *With some phones you may need to repeat this actionSWITCHING BETWEEN A2DP AUDIO SOURCESIf a Music Player is paired, the scala rider G9 will use it as the default A2DP audio source. 1. Stop the music playback from the current device.2. Start music playback from the other device.7.4 CABLECONNECTED MP3 PLAYERS7.4a  CONNECTING YOUR MUSIC PLAYER VIA THE AUXThe AUX Line-in Port is used to connect a non-Bluetooth audio source with a 3.5 mm–⁄” stereo jack using the enclosed cable. AUX Line-in Port1.  Verify that the scala rider G9 is turned ON and in Standby mode (single BLUE ash every 3 seconds).2.  Connect the MP3 cable to the Music Player’s jack and insert the other end of the cable into the AUX Line-in Port.7.4b LISTENING TO MUSIC VIA THE AUXTo listen to music from a cable-connected device, operate the Music Player using its buttons as usual (FF/REW/ PLAY/PAUSE).8. FM RADIOYour scala rider G9 includes a built-in FM radio with a 6 Preset memory and RDS (Radio Data System).8.1 GENERAL FUNCTIONSTurn on Radio Press and hold the Channel “B” button for 2 secondsTurn o Radio  Press and hold the Channel “B” button for 2 secondsPreset stations can be saved via the Cardo Community platform online conguration tool or directly from your G9 device.1. Turn on the Radio.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
2.  Select a Preset number you wish to set (Preset 1 – 6) by tapping the Channel “B” button until the desired Preset is heard.3.  Find an FM station to save using Seek or Scan (see 8.2 RADIO TUNING).8.2 RADIO TUNINGSeek and Save: (Find the next FM station)1.  Press and hold the Volume Up or Volume Down Button for 2 seconds.  •  Pressing Volume Up searches upwards (higher frequency) for a station  •  Pressing Volume Down searches downwards (lower frequency) for a station2.  Tap the Channel “B” button within 20 seconds of nding the FM station to save it as the current Preset.Scan and Save: Scan through FM stations1.  Press and hold the Volume Up button for 5 seconds. The G9 will search upwards (higher frequency) for a station. When a station is found, it can be heard for a few seconds.2.  To stop the scan on this station: Tap the Volume Up Button.3.  Tap the Channel “B” button within 20 seconds of nding the FM station to save it as the current Preset.4.  To continue scan: Wait for the next station to be found.NOTE: During Scan, tap the Channel “B” button to Fast Save the current FM station as the current Preset8.3 AUTOMATIC RADIO TUNINGThis feature makes nding new stations fast and easy by automatically creating a temporary list of 6 “on-the-go” radio stations.1. Turn on the Radio.2. Press and hold the Volume Down button for 5 seconds.3.  Your G9 will search upwards (higher frequency) from the current station and store the next 6 FM stations it discovers as “on the go” stations.4.  If desired, repeat from Step 2 to store the next 6 FM stations as “on the go” stations. NOTE: These 6 temporary “on the go” stations cannot be saved and do not replace the FM Presets you may have saved.Turning o your G9 will clear the Automatic Radio Tuning stations and restore the FM Presets.8.4 RDS ALTERNATIVE FREQUENCIESThis feature allows your G9 to automatically re-tune to the strongest frequency available for the FM station you are listening to when the rst signal becomes too weak.Toggle RDS On/O(Default: O)1. Turn on Radio.2.  Press and hold Volume Up and Volume Down buttons simultaneously for 2 seconds.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
9. TROUBLESHOOTING CONNECTIONSRESET PAIRINGTo delete your paired devices (not including “One+8” pairings):1.  Verify that your G9 is turned ON and in Standby mode (single BLUE ash every 3 seconds).2.  Press and hold the Mobile Button for at least 6 seconds. The G9 will rst ash RED. Continue to hold the button until the RED and BLUE lights begin rapidly alternating.3. Press and hold the Volume Up Button for 2 seconds.4.  The PURPLE light will ash 5 times and then the scala rider G9 will turn OFF, indicating that the Reset was successfully completed.10. SUPPORTFor additional information please visit our website at www.cardosystems.comFAQ:  www.cardosystems.com/support/faq or contact us at: support@cardosystems.comPhone:  USA and Canada: 1-800-488-0363International: +49 89 450 36819IMPORTANT MULTINATIONAL ELECTRONIC COMMERCE COMPANIES AND ONLINE AUCTION WEBSITES ARE NOT AUTHORIZED TO SELL CARDO PRODUCTS AND PURCHASES FROM SUCH SITES ARE AT YOUR OWN RISK. TO RECEIVE WARRANTY OR CUSTOMER SERVICE, YOU MUST SUBMIT ORIGINAL RECEIPTS FROM AUTHORIZED CARDO DEALERS.PRODUCTS THAT WERE IMPORTED FROM NORTH AMERICA MUST ALSO BE SERVICED IN THE USA.11. NOTICESFederal Communications Commission (FCC) Statement15.21You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Operation is subject to the following two conditions:1) this device may not cause interference and2)  this device must accept any interference, including interference that may cause undesired operation of the device.FCC RF Radiation Exposure Statement:This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC/IC multi-transmitter product procedures.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
Industry Canada (IC)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:1) this device may not cause interference and2)  this device must accept any interference, including interference that may cause undesired operation of the device.IC RF Radiation Exposure Statement:This equipment complies with the RSS-102 exemption from routine RF exposure evaluation for use in an uncontrolled environment.European CE Notice Your Cardo product (the “Product”) is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Articles 3.1a, 3.1.b and 3.2. The Product is manufactured in accordance with Annex II of the above directive.Declaration of Conformity (DOC)The Product is compliant with and adopts the Bluetooth® Specication 2.1 and has successfully passed all interoperability tests that are specied in the Bluetooth® specication. However, interoperability between the device and other Bluetooth®-enabled products is not guaranteed.Copyright The contents of this User Guide, including all text, illustrations and drawings are the exclusive intellectual property of Cardo Systems, Inc. (the “Company”) and are protected by copyright laws. They are not in the public domain. Any partial or total reproduction, translation and or dissemination, without the prior written authorization by the Company are strictly prohibited. Any rights not expressly granted herein are reserved.IMPORTANT SAFETY AND WARRANTY INFORMATION – WAIVER AND GENERAL RELEASEWARNING:Cardo Systems Inc., (“Cardo” or the “Company”) noties you that your complete and undivided attention is required when using a communication device (the “Product”) while riding. Failure to avoid potentially hazardous situations could result in accident resulting in serious injury or death.Cardo advises you to take all necessary precautions and remain alert to the trac, weather and all road conditions. It is best to stop away from trac prior to activating or deactivating the Product or initiating or receiving any calls.Do not perform pairing, linking or similar operations while riding. All publications are intended to address technical capabilities and should not be construed as encouraging the operation of Cardo’s Products in any manner that is unsafe or prohibited by law.Exercise all due caution while using this Product and obey all applicable trac laws. Always ride and use the Product in a safe manner. Do not become distracted by the Product while riding on a vehicle. When riding, always consider road, trac, terrain and other conditions to maximize safety. Do not operate the Product if it becomes unsafe to do so.In some regions or states, the use of mobile communications systems is prohibited or restricted. Check all laws and regulations that apply to your region before using the Product and be mindful that compliance with all laws and regulations is the user’s responsibility. Use the Product in motion only where and in the manner that such devices are permitted by applicable law. The Product should not be used in contravention of local, state or federal laws and regulations. Please check federal, state and local laws and regulations before using your Cardo Product.No part of the body should come in contact with the antenna during operation of the equipment. Use Product only where safe, and avoid usage at gas stations, fuel depots or around explosives. Use with hearing aids and medical devices only after consulting a physician or specialist. Make sure to install and mount the Product in a stable manner.HEALTH WARNINGS:Hearing LossAudio devices can cause hearing loss. Employ care and avoid exposure to excessive volume levels that may damage or impair hearing or lead to hearing loss. Permanent hearing loss may occur if Products are used at high volume for prolonged periods of time.RF SignalsMost electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals emanating from your wireless equipment.PacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of about six inches (or 16 cm) to be maintained between a mobile phone or wireless device and a pacemaker to avoid potential interference with the pacemaker. Be sure not to interfere with the functionality of personal medical devices.scala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0
Hearing AidsSome devices may interfere with certain hearing aids. In the event of such interference, you should consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device and/ or your physician to determine if it is adequately shielded from interference caused by external RF energy. Your physician may be able to assist you in obtaining this information.LIMITED WARRANTYSubject to the applicable laws and regulations in your jurisdiction, your Product is covered by a Two-Year Limited product warranty from the date of original purchase. Please retain the retail sales receipt and your registration data for proof of purchase.Subject to the aforementioned, Cardo hereby represents that this Product is warranted to be free from defects in materials or workmanship (proof of purchase and registration required). Within the subject period, Cardo will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacements will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any shipping cost. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.This Product is intended to be used only as a communication and entertainment device and should not be used in any location or jurisdiction where its use is prohibited.The warranties and remedies contained herein are exclusive and in lieu of all other warranties express, implied or statutory, including any liability arising under any warranty of merchantibility or tness for a particular purpose, statutory or otherwise that Cardo specically disclaims. This warranty gives you specic legal rights which may vary from state to state or from jurisdiction to jurisdiction. Cardo makes no other warranties express or implied beyond those stated specically herein. This warranty is extended by Cardo solely to the original purchaser and is not assignable or transferable to others. Cardo assumes no obligation or liability for additions or modications to this warranty unless made in writing and signed by an ocer of the company.Batteries are warranted only if the battery capacity falls below 50% of rated capacity or if the battery develops leakage.IMPORTANT:  Do not store your Product without charging it from time to time for periods in excess of six months, as this may cause irreversible damage to the capacity of your battery. Your warranty will not cover such events.This warranty also becomes void if:a.  any of the seals on the case or battery are broken or Product or battery show signs of tampering,b.  the battery is used in equipment other than the equipment for which it was intended.c. the Product is used in contravention of its intended purposed. the Product was purchased from online auctionsCardo assumes no responsibility resulting from the use of non-Cardo components or products in conjunction with its Products, and specically the use of third party chargers or Bluetooth® devices. Furthermore, Cardo is not responsible for any damage to any part of the Product resulting from the use of ancillary equipment not furnished by Cardo which is attached to or used in connection with the Product.Not covered by the warranty:1.  Defects or damage resulting from the use of this Product in other than its normal and customary manner.2. Defects or damage from misuse, accident or neglect.3.  Defects caused by improper operation, maintenance, installation, adjustment or modication of any kind (incl. long-term storage without periodic charging of the battery).4. Products opened, disassembled or repaired by non-authorized parties.5.  Defects or damage due to exposure to excessive temperatures, adverse weather conditions, external impacts or spills of food or liquid.6.  All plastic surfaces and all other externally exposed parts that are scratched or damaged after purchase.Disclaimer of WarrantyCardo disclaims all express and implied warranties with regard to the enclosed device, including without limitation any implied warranties of merchantability, tness for a particular purpose, and non-infringement. The device and its accessories are provided “as is” and “as available” without warranty of any kind beyond those assumed in the enclosed manual.LIMITATION OF LIABILITYIn no event shall Cardo be liable for any incidental, special, indirect, punitive, exemplary or consequential damages, whether resulting from the use, misuse, or inability to use this product or from defects in the product, or for any damages whatsoever resulting from the use of the product, whether based on breach of contract, tort (including negligence), product liability or otherwise even if advised of the possibility of such damages. You acknowledge and agree that the limitations set forth above are fundamental elements of this agreement to which you consent and without which the product would not be provided to you absent such limitations. Some states do not allow certain exclusions of incidental or consequential damages, so the above limitations may not apply to you.scala rider® G9 / G9 PowerSetscala rider® G9 / G9 PowerSet4**0$1%22.-LQGE $0
Cardo retains the exclusive right to repair or replace (with a new or newly-refurbished replacement Product) the device or software or give a refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.Warranty ServiceTo obtain warranty service, your Product must be registered. Register online at: www.cardosystems.com/registration. Please present the Product, along with your registration number, bill of sale (receipt) at any authorized Service Center or at the store from which you have purchased the Product.To obtain warranty service, contact Cardo’s product support and obtain an RMA tracking number, or contact your local Cardo authorized dealer. Ship securely with a copy of the original sales receipt which is required as proof of purchase for warranty repairs. The RMA tracking number should be written on the outside of the package. Send the Product freight charges prepaid, to the Cardo address as directed by Cardo.Online Auction Purchases: Online auction conrmations are not accepted for warranty verication. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Cardo will not replace missing components from online auction sites.Other manufacturers: Cardo is not responsible for and expressly disclaims any responsibility for how Cardo Products are used or misused arising out of use with products, services or information of other vendors.WAIVER AND GENERAL RELEASEBy using the Product, you will waive substantial legal rights including the right to sue. Please read the following carefully before using the Product.By using the Product, you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorneys fees) and holding Cardo harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Product under any circumstances or conditions and irrespective of jurisdiction.1. You, your heirs, legal representatives, successors or assigns, hereby voluntarily and forever release, discharge, indemnify and hold harmless Cardo from any and all litigation, claims, debts, demands, actions and liability which may arise, directly or indirectly, from using the Product for any distress, pain, suering, discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law.2. You fully understand and assume the risks in using the Product, including risk of negligent acts or omissions by others. All risks for operating the Product are assumed solely by the user of the Product.3. You conrm that you are physically capable to use the Product and that you have no medical conditions or needs that may infringe upon your abilities to do so in a safe manner. You further conrm that you will not consume any alcohol that may aect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Product.4. You fully acknowledge our warnings and understand that:(a)  risks exist in using the Product while in trac, including but not limited to injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that could cause serious disability;(b)  these risks may be caused by the negligence of the manufacturers or its agents or any third party involved in the Product;(c) these risks and dangers may arise from foreseeable or unforeseeable causes.You hereby assume all risks and dangers and all responsibility for any losses and/or damages, whether caused in whole or in part by the negligence or other conduct of others, including Cardo.5.  By using the Product, you conrm that you have read this release of liability and fully understand and accept its terms and conditions.www.cardosystems.comscala rider® G9 / G9 PowerSet scala rider® G9 / G9 PowerSet 4**0$1%22.-LQGE $0

Navigation menu