Cardo Systems ER14 Bluetooth headset User Manual QG G9 EN
Cardo Systems, Inc. Bluetooth headset QG G9 EN
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1647257 |
| Application ID | nSWSxp+OIz7xi7DAtwZ9IA== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 366.71kB (4583827 bits) |
| Date Submitted | 2012-03-02 00:00:00 |
| Date Available | 2012-03-05 00:00:00 |
| Creation Date | 2012-02-09 10:34:20 |
| Producing Software | GPL Ghostscript 8.64 |
| Document Lastmod | 2012-02-29 12:59:38 |
| Document Title | QG G9 EN .pdf |
| Document Creator | Adobe Acrobat 10.1.2 |
| Document Author: | moato |
4** 0$1 %22.-LQGE G9 / G9 PowerSet ⢠$0 User Guide 3 6.1. MAKING TWO-WAY INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . . . 17 6.2 MAKING THREE-WAY INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . 18 6.3 MAKING FOUR-WAY INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . . 18 6.4 USING CLICK-TO-LINK INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6.5 RECEIVING INTERCOM CALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.6 BUSY SIGNAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.7 GROUP SIGNAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.8 VOICE CONNECT (VOX) SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 USING THE INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.1 âONE+8â INTERCOM TOGGLING MODE . . . . . . . . . . . . . . . . . . . . . . 13 5.1a CONFIGURING YOUR G9 BUDDY NAME . . . . . . . . . . . . . . . . . . 13 5.1b HEARING YOUR ASSIGNED NAME . . . . . . . . . . . . . . . . . . . . . . . 13 5.1c PAIRING WITH A âONE+8â INTERCOM BUDDY . . . . . . . . . . . . . 13 5.1d PAIRED DEVICE INDICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.2 INTERCOM CONFERENCE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.2a TWO-WAY INTERCOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.2b THREE-WAY INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.2c FOUR-WAY INTERCOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5.3 CLICK-TO-LINKÂŽ INTERCOM MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 INTERCOM CONFIGURATION:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 4.1 MOUNTING THE SCALA RIDER G9 ON YOUR HELMET . . . . . . . . 5 4.2 GENERAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.3 STATUS LIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.4 AUDIO SOURCES AND PRIORITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.5 VOICE COMMAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.6 SETTINGS CUSTOMIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.7 VOICE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHARGING THE SCALA RIDER G9ÂŽ . . . . . . . . . . . . . . . . . . . . . . . . . CARDO COMMUNITY⢠PLATFORM AND âONE+8â INTERCOM . . . GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet 6. 5. 1. 2. 3. 4. CONTENTS 9. 10. 11. 8. 7. $0 IMPORTANT: This is version 1.1 of the User Manual. Please note, that our manual is periodically updated on the Cardo website to include the very latest features and functions of your new scala rider G9. Please visit www.cardosystems.com/download/manuals to check if the manual you are holding is the most updated version and to download the manual in your preferred language. TROUBLESHOOTING CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . .24 SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 NOTICES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 8.1 GENERAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 8.2 RADIO TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 8.3 AUTOMATIC RADIO TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 8.4 RDS (ALTERNATIVE FREQUENCIES) . . . . . . . . . . . . . . . . . . . . . . . . . . 23 FM RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 7.1. MOBILE PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 7.1a PAIRING A MOBILE PHONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 7.1b MAKING AND RECEIVING PHONE CALLS . . . . . . . . . . . . . . . . .20 7.1c HOT DIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.2. PAIRING A GPS DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.3 MUSIC STREAMING VIA A2DP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.3a PAIRING TO AN A2DP MUSIC PLAYER . . . . . . . . . . . . . . . . . . . . 21 7.3b LISTENING TO MUSIC VIA A2DP . . . . . . . . . . . . . . . . . . . . . . . . 22 7.4 CABLE-CONNECTED MP3 PLAYERS . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.4a CONNECTING YOUR MUSIC PLAYER VIA THE AUX . . . . . . . . 22 7.4b LISTENING TO MUSIC VIA THE AUX . . . . . . . . . . . . . . . . . . . . . 22 PAIRING AND USING A MOBILE PHONE, GPS OR MP3 PLAYER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 4** 0$1 %22.-LQGE ⢠Download software upgrades, enhancements and new features ⢠Set up your âOne+8â Intercom buddies CARDO COMMUNITY⢠⢠Wireless music streaming via devices supporting Bluetooth Stereo A2DP and AVRCP profiles. ⢠MP3 Players (non-Bluetooth) via cable ⢠Built-in FM Radio with 6 station presets and automatic tuning ENTERTAINMENT OPTIONS ⢠Bluetooth Mobile phone / GPS device ⢠Wireless A2DP/ MP3 connectivity for stereo music (cable option also provided) MULTIPLE DEVICE CONNECTIVITY ⢠Intercom Conference mode between 2, 3 or 4 riders at a range of up to 1 mile /1.6 km* ⢠Click-to-LinkÂŽ Intercom: For spontaneous connection with other scala rider G9 or G4 user nearby ⢠âOne+8â Intercom Toggling with 8 additional buddies INTERCOM OPTIONS Among others, the scala rider G9 offers the following key features: If you have purchased the G9 PowerSetâ˘, your retail box contains two factory-paired scala rider G9 units. Thank you for choosing the scala rider G9ÂŽ BluetoothÂŽ communication and entertainment system for motorcycle helmets. This manual will help you set up, configure and operate the scala rider G9. 1. INTRODUCTION $0 scala riderÂŽ G9 / G9 PowerSet * Under tough environmental conditions (dense forest, narrow buildings, heavy traffic), intercom range will be reduced. Once conditions improve, the range will increase again. ÂłVoice Command and VOX technology: ⢠Make / Receive mobile calls by voice command ⢠Make / Receive intercom calls by voice command ÂłAGC technology (Automatic Gain Control), allowing the automatic adjustment of volume according to ambient noise and driving speed. You can also control the volume level manually. AGC sensitivity levels can be customized to suit your personal preferences. ÂłVOX technology and Voice Command for safe and handsfree operation of key functions. VOX sensitivity levels can be customized to suit your personal preferences. ÂłPLC software (Packet Loss Concealment) for real-time compensation of audio losses in challenging environments. ÂłAdvanced software updates via any PC running WindowsÂŽ XPâ˘, Vista⢠or Windows 7. ÂłSpoken status announcements, so that you always know to whom or to what device you are connected. ÂłVolume Per Mode: Volume is set and saved at different levels for each audio source. We wish you a great scala rider G9 experience and encourage you to write us at support@cardosystems.com with any questions, suggestions or comments you may have. ADVANCED TECHNOLOGY ⢠Create, find and join riding tours ⢠Customize your G9 settings Interchangeable flexible boom (Corded mic also provided) Voice Command Button âOne+8â Intercom Channel B Button ⢠Connect to Rider B ⢠FM Radio Button Flip-up Antenna Sliding Panel ⢠Charging jack ⢠Software download port Silicone Cover MP3 Jack (back) Two speakers 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet The scala rider G9 has been certified as waterproof and dustproof (IP67). However, when in use, the silicon cover of the Charging Jack should be kept tightly closed to prevent moisture from entering the unit. IMPORTANT: Channel A Button ⢠Connect to Rider A ⢠MP3 Button Volume Up / Forward button Mobile phone button Volume Down / Rewind button scala rider G9 Unit Noise canceling sealed omni microphone G9 Audio Kit NOTE: If you purchased the scala rider G9 PowerSet, your Retail Box will include two sets of each component listed below. CONTENTS OF RETAIL BOX Glue plate Carry pouch 4. While charging, the red LED turns on. When charging is complete, the red LED will turn off. $0 3. Insert the other end of the USB cable into the wall charger or a computerâs USB port. Make sure that your scala rider G9 is fully charged for at least 4 hours before initial use. 1. Open the silicone cover protecting the Charging Jack. 2. Insert the USB cable into the Charging Jack. 2. CHARGING THE SCALA RIDER G9 * The large microphone sponge is recommended for use with open helmets Velcro Pads MP3 cable USB adapter cable Pre-moistened Towlettes $OFRKRO 3DG Wall charger plug Replacement Mic sponges* Allen wrench Corded Microphone 4** 0$1 %22.-LQGE *System Requirements: WindowsÂŽ XPâ˘, Windows Vistaâ˘, or Windows 7 The Cardo Community is one of the most remarkable and groundbreaking features of the scala rider G9. Visit http://community.cardosystems.com in order to get the following features: ⢠âOne+8â Intercom: The scala rider G9 allows Intercom toggling with up to 8 other individual riders. ⢠Download and install the latest software upgrades ⢠Configure your own Buddy name (alias) for the âOne+8â Intercom mode and Connect your G9 and personalize the settings your PC by inserting the of your G9 through USB cable into the your PC* computerâs USB port and the other end into the ⢠Find your friends and software download port add them to your âOne+8â Buddy list of the G9 ⢠Create and join tours and invite your friends To register, make sure to have your product serial number ready which can be found on the white label on the back of the unit. 3. CARDO COMMUNITY ONLINE PLATFORM AND âONE+8â INTERCOM $0 scala riderÂŽ G9 / G9 PowerSet NOTE: The boom microphone can be used with open, half, full face and modular helmets. The corded microphone is for full face helmets. Glue the Audio Kit onto your helmet when the standard Back Plate method cannot be used. Glue Plate See âUsing the Glue Plateâ on next page Back Plate Method B See âUsing the Back Plateâ on next page Method A 4.1 MOUNTING THE SCALA RIDER G9 ON YOUR HELMET 4. GETTING STARTED 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet â â Allen Wrench Back Plate Loosen both screws Adjust the clampâs location so that the microphone is located opposite the center of your mouth. Push the back plate between the helmetâs outer shell and inner padding â METHOD A: USING THE BACK PLATE Tighten the screws â â Allen Wrench Pre-moistened Towlette Adjust the audio kitâs location so that the microphone is located in front of the center of your mouth. Remove the Back Plate by taking out both screws with the Allen Wrench. $0 NOTE: Please read the entire section before proceeding. While we have no reason to believe that the gluing option might negatively affect any helmet, Cardo does not assume any responsibility to that effect, irrespective of its nature and circumstances. The Glue Plate is offered as an option that you may choose to use at your own risk and subject to renouncement of any future claims. Glue Plate $OFRKRO 3DG METHOD B: USING THE GLUE PLATE (This can only be done once!) â Allow the glue to dry for 24 hours â $OFRKRO 3DG Use the Alcohol Pad to clean the exact spot on the helmet 4** 0$1 %22.-LQGE â â â â Fasten both screws tightly Press here for 15 seconds Peel off protective backing sheet Velcro pads $0 scala riderÂŽ G9 / G9 PowerSet Using two speakers inside the helmet may be prohibited in certain jurisdictions. If this is the case, postion both speakers on one side of the helmet. Cross the long speaker wire over the center of the helmet to enhance FM radio reception. Attach Velcro Pads to inside of Helmet For best clarity, place speakers directly opposite and close to the ears. Helmets with deep recesses may require padding to bring the speakers closer for ideal positioning. Speaker velcro pad position Audio Kit PLACING THE SPEAKERS Removing â â only (not Modular helmets). 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet â â Velcro Pad Remove the screw Remove both screws NOTE: The Corded Microphone can be used with Full face helmets Corded microphone Allen wrench CHANGING THE MICROPHONE TYPE â â Attaching â â $0 Tighten the screws Tighten the screw CHANGING MICROPHONE TYPE (cont.) 4** 0$1 %22.-LQGE Attach Velcro to inside front of helmet â Corded Microphone Velcro Pad â Adjust the Audio Kitâs location so that the microphone is located opposite the center of your mouth. Boom Microphone POSITIONING THE MICROPHONE â â Carefully attach the new sponge to the microphone $0 scala riderÂŽ G9 / G9 PowerSet â Carefully remove the existing sponge. â Remove protective backing sheet from replacement sponge Pinch and pull existing microphone sponge NOTE: A replacement corded microphone sponge is provided for future use should you need it. The wires to the microphone are delicate. Avoid touching them. REPLACING THE CORDED MICROPHONE SPONGE 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet push! ATTACHING AND REMOVING THE G9 FROM THE AUDIO KIT push! CLIC Press and hold the Mobile Button for 2 seconds ⢠Light: 3 RED flashes ⢠Sound: Descending tone Press and hold the Mobile Button for 2 seconds ⢠Light: 3 BLUE flashes ⢠Sound: Ascending tone Press and hold the Volume Up Button for 2 seconds Light: ⢠BLUE = Full charge ⢠PURPLE = Half charge ⢠RED = Almost empty Battery level indicator Standby mode No active audio sources Active mode â Call in progress / music or other audio source is ON Standby mode â Battery is low 1 BLUE flash every 3 seconds 2 BLUE flashes every 3 seconds 1 RED flash every 3 seconds Solid RED Charging $0 scala rider G9 is OFF None 2 RED flashes every 3 seconds Active mode â Battery is low Status LED Indication 4.3 STATUS LIGHTS Tap Volume Up and Volume Down buttons simultaneously Mute speakers Volume Tap the Volume Up or Volume Down Button Adjust and set volume of current audio source Power OFF Power ON GENERAL FUNCTIONS 4.2 GENERAL FUNCTIONS *GPS instructions from Smartphone GPS Apps are prioritized like A2DP audio 1. Mobile Phone audio or GPS instructions* 2. Intercom/âOne+8â/Click-to-Link 3. A2DP (Stereo Bluetooth) audio 4. FM Radio (Built-in) 5. AUX (for corded connection i.e. Music Players) 4** 0$1 %22.-LQGE The G9 allows you to perform certain actions by simply using your voice. Using advanced Voice Recognition, you can control the G9 completely handsfree. The default Voice Command language is English. Other languages can be selected via the Cardo Community platform including German, French, Italian and Spanish (see section 3). Throughout this manual, features which are available via Voice icon. Command are marked with the 4.5 VOICE COMMAND For example: ⢠Incoming mobile phone calls interrupt ongoing intercom calls ⢠Incoming intercom calls will interrupt ongoing A2DP music Click-to-Link, Intercom and âOne+8â calls have the same priority: Click-to-Link requests will not interrupt any type of Intercom call in progress, and vice-versa. Lower Priority Ă Higher Priority If two connected audio sources try to play audio simultaneously, your scala rider G9 automatically determines which audio source to play through the speakers based on the priority of the connected devices. 4.4 AUDIO SOURCES AND PRIORITIES Stop / Pause A2DP A2DP <>* âMusic OFFâ âRadio OFFâ âRadio ONâ âMusic ONâ $0 scala riderÂŽ G9 / G9 PowerSet Your G9 offers various customizable settings, allowing you to personalize it according to your preferences. Among these settings, you can: ⢠Enable/Disable Spoken Status Announcements, i.e. informing you about the respective connectivity status, like if you are in mobile phone or intercom mode, and confirm changes of such modes. By default the feature is ON. 4.6 SETTINGS CUSTOMIZATION NOTE: Voice Command performance may vary based on environmental conditions including driving speed, helmet type and ambient noise. For improved performance of the Voice Command feature, minimize wind impact on the microphone by using the large microphone sponge and closing the visor. *see Section 5.1 for details Turn off FM Turn on FM Start A2DP FM Standby âOne+8â Intercom Call* Standby / FM / A2DP / AUX Say this: Intercom call with A or B âCall Intercomâ Desired Action Current Mode 1. In Standby Mode (no call in progress), tap the Voice Command button or speak any word loudly to activate VOX 2. Speak a Voice Command from the table below: VOICE COMMAND TABLE: 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet Pairing with another scala rider G9 To chat with another scala rider device via Intercom, first pair the scala rider G9 to the second device. Pairing is a one-time process. e+8 â 4W Click-to-Link (scala rider G9 and G4 models) Section 5.3 ns $0 1-on-1 spontaneous intercom conversations with random scala rider users near you who are not already paired to your G9 Intercom Conferencing (2-way, 3-way and 4-way) (Channel âAâ and âBâ) 2-way Intercom conversations within a group of up to eight other âOne+8â Buddies * Intercom Conference calls available only on G4 and G9 models. Intercom Conference Mode (all scala rider models)* ng In gl i ay Intercom Tog Section 5.2 Section âOne+8â Intercom 5.1 Toggling Mode (scala rider G9 only) âO erco Int fe re ncing Open the antenna for maximum range The scala rider G9 allows Bike-to-Bike full duplex intercom communication at a range of up to 1 mile / 1.6 km (subject to terrain) with antenna open and within line of sight. G9 Intercom communication is possible comusing Optone of the three Intercom modes: io In NOTE: If you have purchased the G9 PowerSet, the retail package contains two factory-paired units configured to communicate via their Channel A buttons. Once paired, the scala rider G9 will automatically recognize the second unit whenever it is within range. Co n 5. INTERCOM CONFIGURATION The Voice menu is available in several languages. 1. While on standby, press and hold the Channel âAâ button and Channel âBâ button simultaneously for 2 seconds while on standby. 2. After entering the menu, follow the voice instructions in English or choose your preferred language. 4.7 VOICE MENU ⢠Set custom AGC and VOX sensitivity levels suited to your specific riding style and conditions. G9 settings can be customized in two ways: ⢠Via the Cardo Community platform at http://community. cardosystems.com (requires Windows PC). See Section 3. ⢠Via the Voice Menu and the buttons on your G9 unit â see below. an k-to-Link Spo Clic nt er om 4** 0$1 %22.-LQGE Visit the Cardo Community platform http://community.cardosystems.com to assign your G9 deviceâs Buddy Name using your PC. See Section 3 for more details. Until you assign a Buddy Name to your G9, it will be known by its generic âOne+8â Buddy name, âscala riderâ. âOne+8â Intercom Buddies will be able to connect to your G9 by manually choosing your G9 from their âOne+8â Intercom Buddy List (see Section 6.1: Option 2: Manual Mode). IMPORTANT! Before using âOne+8â Intercom, you should assign your G9 device(s) a Buddy Name, so that other âOne+8â participants can call you by this name. If you change your G9 Buddy Name, you must Flash Pair again with your âOne+8â Buddies for their G9 to receive your new Buddy Name. 5.1a CONFIGURING YOUR G9 BUDDY NAME âOne+8â Intercom Toggling allows you to connect to a âOne+8â Buddy by simply saying the Buddy Name they assigned to their G9. 5.1 âONE+8â INTERCOM TOGGLING MODE Pair with up to 8 other G9 devices (âOne+8â Buddies) and connect with one at a time by pronouncing their name. Intercom Compatibility Your scala rider G9 is compatible with all scala rider intercom models for intercom calls. In addition, it is also compatible with the Schuberth SRC-Systemâ˘. Intercom range with other models is limited to the distance of the device with the shorter range. For instructions on how to pair and use your scala rider G9 with other scala rider models, please visit www.cardosystems.com/compatibility. $0 scala riderÂŽ G9 / G9 PowerSet NOTE: If your scala rider G9 already has a full list of 8 paired âOne+8â Intercom Buddies, pairing another buddy will replace the buddy that you have not spoken to for the longest time. 3. If Flash-Pairing was successful, a purple light appears for 2 seconds. CLIC K! 5.1c PAIRING WITH A âONE+8â INTERCOM BUDDY Flash-Pairing⢠Use Flash-Pairing to add a new âOne+8â Buddy within seconds. 1. Remove both G9 units from their Audio Kits and check they are in Standby Mode (slow single blue flashing). 2. Bump the two G9 units gently against each other and hold them side by side. 5.1b HEARING YOUR ASSIGNED NAME To hear the name you have chosen for your G9: 1. Start with the G9 in Standby mode. 2. Simultaneously tap the Voice Command and Channel âBâ buttons. 3. You will hear the Buddy name of your G9 through the speakers. Channel âAâ BUTTON Channel âBâ BUTTON Channel âAâ Channel âBâ 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet PAIRING / CONNECTION BUTTON INTERCOM CHANNEL Rapid BLUE flashing Rapid RED flashing PAIRING MODE LED INDICATORS INTERCOM CHANNELS AND PAIRING LED INDICATION Start multi-party conversations using the Channel A and B buttons on your G9. This mode is suitable for 2, 3 or 4-way calls. Pairing between scala rider G9s can be done either via FlashPairing (see below) or by manually pairing the Channel A and B buttons as described in the following sections. 5.2 INTERCOM CONFERENCE MODE 5.1d PAIRED DEVICE INDICATION Use the Paired Device indication to quickly see which G9 units within a range of 60ft./20m are your âOne+8â Intercom Buddies. 1. Press and hold the Voice Command button for 5 seconds. 2. If your G9 and another nearby G9 are paired as âOne+8â Buddies, both your Purple lights will turn on for 2 seconds. 3. If they arenât paired as âOne+8â Buddies, pair them in seconds using Flash-Pairing (see Section 5.1c). Pairing Online â Cardo CommunityÂŽ You can find your friends and add them to your âOne+8â Buddy list via the Cardo Community website at: http://community.cardosystems.com $0 5. If Flash-Pairing was successful, a purple light appears for 2 seconds. CLIC K! 4. Within 5 seconds of tapping a Channel button, bump the two G9 units gently against each other and hold them side by side. NOTE: Selecting a Channel that is already in use will override the existing paired device on that Channel with the newly-paired device. METHOD 1: Flash-Pairing with Channel A and B buttons 1. Remove two G9 units from the Audio Kits and verify they are in Standby Mode (slow single blue flashing). 2. Tap the Channel button (âAâ or âBâ) on the first G9 unit and the purple light begins flashing. 3. Tap the Channel button (âAâ or âBâ) on the second G9 unit and the purple light begins flashing. If you have purchased the G9 PowerSet, both units are factorypaired and configured to communicate via their respective Channel âAâ Buttons. If for any reason you have to pair them again, OR if you purchased a single scala rider G9 and wish to pair with a second unit to make Intercom calls, proceed as follows: 5.2a TWO-WAY INTERCOM 4** 0$1 %22.-LQGE NOTE: If Pairing is not completed within two minutes, the G9 will return to Standby mode. 3. Press and hold the chosen Channel Button (âAâ or âBâ) on the first G9 for at least 5 seconds until the BLUE or RED LED begins flashing rapidly, indicating it is in Intercom Pairing mode (see Table in section 5.2). 4. Immediately repeat Steps 2-3 for the second G9 unit. Both units will now be in Intercom Pairing mode. 5. After a few seconds, both G9s will show a solid light for 2 seconds, indicating that they are paired, connected and ready to use. NOTE: Selecting a Channel that is already in use will override the existing paired device on that Channel with the newly paired device. flash every 3 seconds). 2. Choose a channel to pair the G9 unit (Channel âAâ or âBâ). METHOD 2: Manual Pairing with Channel A / B buttons 1. Check that both G9s are ON and in Standby mode (single BLUE han Rider 1 nel â Aâ Ch a Use nn e Rider 3 l âBâ $0 scala riderÂŽ G9 / G9 PowerSet During a 3-Way Intercom Conference call with 2 other participants, Rider 1 will not be able to receive mobile phone calls or GPS navigation instructions as long as the call is in progress. IMPORTANT: Three-Way Conference Mode Considerations Rider â1â is paired to Rider â2â and also to Rider â3â. PAIRING THREE SCALA RIDER G9 UNITS 1. Rider 1 pairs their device to Rider 2 using Channel âAâ as described in section 5.2a. 2. Rider 1 pairs their device to Rider 3 using Channel âBâ as described in section 5.2a. The Three-Way Conference Intercom Pairing is now complete and ready to use. Rider 2 Use To set up three-way intercom conference mode proceed as follows: If you purchased the scala rider G9 PowerSet, both units are factory-paired and configured to communicate via their respective Channel âAâ Buttons. To pair a third scala rider G9 use Channel âBâ. 5.2b THREE-WAY INTERCOM 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet IMPORTANT: Four-Way Conference Mode Considerations During a 4-Way Intercom call, the two passengers who maintain two active connections simultaneously will not be able to receive mobile phone calls or GPS instructions as long as the conference call is in progress. PAIRING FOUR SCALA RIDER G9 UNITS 1. Pair Rider 1 to Passenger 2 using Channel âAâ (see section 5.2a). 2. Pair Rider 3 to Passenger 4 using Channel âAâ (see section 5.2a). 3. Pair Passenger 2 to Passenger 4 using Channel âBâ (see section 5.2a). The Four-Way Pairing is complete and ready to use. In this configuration the two passengers (numbered 2 and 4) are each using two Bluetooth connections: Passenger 2 is paired to Rider 1 and to Passenger 4 Passenger 4 is paired to Rider 3 and to Passenger 2 5.2c FOUR-WAY INTERCOM To set up four-way intercom conference mode proceed as follows: NOTE: By default, Click-to-Link is DISABLED. $0 ENABLE/DISABLE CLICK-TO-LINK The feature can be turned on or off via the Voice Menu (see Section 4.7) Click-to-Link is a spontaneous, âsocialâ feature of your G9. Use Click-to-Link to instantly initiate 1-on-1 intercom calls with other scala rider users near you, without those users already being paired to you. Think of it as a private Bike-to-Bike channel that you can set up on-the-go with other scala rider G9 or G4 users that you see along the way. The Click-to-Link feature can be disabled on your G9 effectively blocking any attempt by a third party to send a Click-to-Link request to you. 5.3 CLICK-TO-LINK INTERCOM MODE 4** 0$1 %22.-LQGE Channel A button Connect to Rider A Channel B button Connect to Rider B Voice Command button âOne+8â Intercom OPTION 2: Manual Mode NOTE: VOX Intercom call with only Rider A or Rider B will end automatically after 30 seconds of silence. Use this for either âOne+8â Intercom or 2-way Intercom Calls (Channel âAâ or âBâ) 1. Speak any word loudly into the microphone to open the Intercom channel. 2. When you hear the Voice Command tone, say: ⢠the name of a âOne+8â Intercom Buddy i.e. âJohn Smithâ ⢠or say âCall Intercomâ to start an intercom call with Rider A and / or Rider B (subject to who is present) OPTION 1: Voice Connect (VOX) Intercom Call There are two ways to start an intercom call with devices that are paired to your scala rider G9. 6.1 MAKING 2-WAY INTERCOM CALLS 6. USING THE INTERCOM $0 scala riderÂŽ G9 / G9 PowerSet NOTE: Voice Command performance may vary based on environmental conditions including driving speed, helmet type and ambient noise. For improved performance of the Voice Command feature, minimize the wind impact on the microphone by using the large microphone sponge and closing the visor. a. Press and hold the Voice Command button for 2 seconds b. The G9 plays the names of all pre-paired âOne+8â Intercom buddies. c. Once you hear the name of the Buddy you wish to call, tap the Voice Command button or speak any word loudly into the microphone. To cancel âOne+8â Buddy List playback: Press and hold the Voice Command button for 2 seconds. a. Tap the Voice Command button b. Speak the name of the âOne+8â Intercom Buddy OR CHOOSE THE NAME (from your Buddy List): SAY THE NAME: âOne+8â Intercom Use this to start an Intercom call with either: ⢠âRIDER Aâ â tap Channel A button ⢠âRIDER Bâ â tap Channel B button ⢠âOne+8â Intercom Buddy â See table below To end a call tap the respective button again. 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet Once you have successfully paired the four G9s as described in 5.2c. proceed as follows: 1. Make sure all four G9s are in Standby mode. 2. Passenger 2 should tap Button âBâ to initiate an Intercom call with Passenger 4. Wait until audio is heard on both G9s. 3. Rider 1 should tap Button âAâ to initiate an Intercom call with Passenger 2. 4. Rider 3 should tap Button âAâ to initiate an Intercom call with Passenger 4. 6.3 MAKING 4-WAY INTERCOM CALLS NOTE: 3 and 4-way intercom calls can only be made using Channel âAâ and Channel âBâ. 2. Add Channel âBâ: Tap the Channel âBâ Button If you are already in an Intercom Call with Rider A or B, you can add another rider (A or B) by tapping the respective button, or another rider can join the intercom call in the same way. To end Intercom Call press the respective Channel âAâ or âBâ Button. OPTION 2: Manual Mode 1. Add Channel âAâ: Tap the Channel âAâ Button 1. Speak any word loudly into the microphone to open the Intercom channel. 2. When you hear the Voice Command tone, say: âCall Intercomâ to make an intercom call with Rider A and Rider B. OPTION 1: Voice Connect (VOX) To start an Intercom Conference Call with Channel âAâ and âBâ: 6.2 MAKING 3-WAY INTERCOM CALLS When hearing the Click-to-Link ringtone: Tap the Channel âAâ Button or Speak any word loudly to answer by VOX While hearing the Click-to-Link ringtone: Remain silent until the ring tone stops Reject a Click-to-Link call Tap the Channel âAâ Button End a Click-to-Link call / Cancel a Click-to-Link call request Accept a Click-to-Link call Double tap the ChannelâAâ Button Start a Click-to-Link call request (search lasts up to 10 seconds) Perform this action: $0 If other scala rider users are nearby, your next Click-to-Link call may randomly connect to any of them. Receive Click-to-Link calls Make Click-to-Link calls If you want to⌠6.4 USING CLICK-TO-LINK INTERCOM Now the 4-way Intercom conference mode is established. 4** 0$1 %22.-LQGE Send an instant message to all paired G9s within a range of up to 350 m / 1,150 ft. The recipients will hear a âSignal!â voice announcement. To reach a maximum number of riders, the message is automatically forwarded to all paired G9s within the recipientâs range. In this manner the total range is extended to up to 1 km / 3,280 ft. 6.7 GROUP SIGNAL When attempting to establish an Intercom call with another device that is already busy, a busy signal will be heard. The G9 is busy while on a phone call, intercom call with Channels âAâ and âBâ, âOne+8â intercom call or Click-to-Link call. 6.6 BUSY SIGNAL ⢠If another paired scala rider G9 tries calling you via Intercom, the call will begin almost instantly. ⢠If you receive a âOne+8â intercom call from someone who is not in your Buddy list, you will hear a ringtone. Tap the Channel âAâ button to accept the Intercom call, or remain silent until the ringtone stops to reject the call. 6.5 RECEIVING INTERCOM CALLS $0 scala riderÂŽ G9 / G9 PowerSet ENABLE/DISABLE VOX Press and hold Volume Up and Down buttons simultaneously for 2 seconds. Feedback: ⢠Enable: Blue flash for 2 seconds ⢠Disable: Red flash for 2 seconds For incoming calls, just pronounce loudly any word (e.g. âhelloâ). To reject an incoming call, remain silent for about 15 seconds. The G9 offers VOX technology for safe and hands-free operation of some key functions. The VOX feature can be customized to adjust its sensitivity level. VOX activation for Intercom calls can also be disabled completely. You can choose between âRegularâ (default), âLowâ and âHighâ VOX sensitivity. If you experience difficulties starting a conversation using VOX, change the setting to âHighâ via the Cardo Community website or directly on your G9 via the Voice Menu (see Section 4.6). 6.8 VOICE CONNECT (VOX) SETTINGS NOTE: The transfer of wireless signals is subject to multiple external factors. Therefore, users may use but should not rely on the Group Signal for emergency purposes. Activating the Group Signal: Double tap the Voice Command button to send a Group Signal at any time. 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet 7.1a PAIRING A MOBILE PHONE If using both a Bluetooth GPS and Mobile Phone, pair the mobile phone to the GPS device. See Section 7.2 1. Turn on your mobile phone and make sure the Bluetooth function is activated. 2. Verify that the scala rider G9 is turned ON and in Standby mode. (single BLUE flash every 3 seconds). 3. Press and hold the Mobile Button for at least 6 seconds. The G9 will first flash RED. Continue to hold the button until the RED and BLUE lights begin rapidly alternating. 4. Search for Bluetooth devices on your phone by following the phoneâs instructions. Consult your phoneâs User Manual for more information. ⢠Make and receive calls ⢠Listen to Music via A2DP (with compatible phones) 7.1 MOBILE PHONE To connect your scala rider G9 to a Bluetooth device you must first pair them. Pairing is a one-time process. Once paired, the Bluetooth device and the scala rider G9 will automatically recognize each other whenever they are within range (10m / 33ft). Your scala rider G9 offers Multiple Device Connectivity (âMDCâ) : Âł Intercom with up to 10 other scala rider G9 units (Rider A, Rider B, and âOne+8â Buddies) Âł Bluetooth Mobile Phone / GPS device Âł Bluetooth A2DP Music Player 7. PAIRING AND USING A MOBILE PHONE, GPS OR MP3 PLAYER Remain silent for 15 seconds, or press and hold the Mobile Button for 2 seconds Tap the Mobile Button Reject a call End a call Tap the Mobile Button twice $0 Tap the Channel âBâ button while on a phone call Add/Remove Channel âBâ to/from a call *This feature is not available during intercom or mobile calls Tap the Channel âAâ button while on a phone call Add/Remove Channel âAâ to/from a call INTERCOM CONFERENCE MODE Redial* Voice Dial* (if supported Tap the Mobile Button and follow the by mobile phone) prompt from the mobile Tap the Mobile Button or speak any word loudly to answer by VOX Answer a call BASIC FUNCTIONS 7.1b MAKING AND RECEIVING PHONE CALLS NOTES: ⢠If Pairing is not completed within 2 minutes, the scala rider G9 will return to Standby mode. ⢠Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music (A2DP), even if the phone has an MP3 player function. Consult your mobile phoneâs User Manual for more information. ⢠After pairing, you may need to tap the Mobile Button to connect the scala rider G9 to the phone. 5. After a few seconds the phone will list âscala rider G9â as a discovered device. Select âscala rider G9â from the list. 6. If prompted for a PIN or Passkey, enter 0000 (four zeros). 7. The phone will confirm that pairing has succeeded and the scala rider G9 will begin flashing slowly in BLUE. 4** 0$1 %22.-LQGE 1. Turn on your GPS. 2. Verify that your G9 is turned ON and in Standby mode (single BLUE flash every 3 seconds). 3. Press and hold the Volume Up Button for at least 5 seconds, until the PURPLE light begins flashing rapidly. 4. Search for Bluetooth device on the GPS device by following the instructions in the GPS User Manual. 5. Once your GPS lists the scala rider G9 as a discovered device, select it. 6. If prompted for a PIN or Passkey, enter 0000 (four zeros). 7. Your GPS will confirm that pairing has succeeded and the scala rider G9 will begin flashing slowly in BLUE. NOTES: ⢠Not all Bluetooth GPS devices allow connections to Bluetooth audio devices. Please consult your GPS User Manual for more information. ⢠If Pairing is not completed within 2 minutes, the scala rider G9 will return to Standby mode. ⢠Receive GPS navigation instructions 7.2 PAIRING A GPS DEVICE 7.1c HOT DIAL Call a pre-programmed phone number automatically at the push of a button. 1. Configure your G9âs Hot Dial number via the Cardo Community at http://community.cardosystems.com. See Section 3 for more details. 2. To call your Hot Dial number, tap the Channel âAâ and Channel âBâ buttons simultaneously. $0 scala riderÂŽ G9 / G9 PowerSet 1. Turn on the Music Player and make sure that Bluetooth function is activated. 2. Verify that the scala rider G9 is turned ON and in Standby mode (single BLUE flash every 3 seconds). 3. Press and hold the Mobile Button for at least 6 seconds. The G9 will first flash RED. Continue to hold the button until the RED and BLUE lights begin rapidly alternating. 4. Search for Bluetooth device on the Music Player by following the deviceâs instructions. 5. Once your Music Player lists the âscala rider G9â as a discovered device, select it. 6. If prompted for a PIN or Passkey, enter 0000 (four zeros). 7. The Music Player may confirm that pairing has succeeded, and the scala rider G9 will begin flashing slowly in BLUE. NOTE: The scala rider G9 can also receive audio via the enclosed cable from non-Bluetooth MP3 Players or audio sources as described in section 7.4. 7.3a PAIRING TO AN A2DP MUSIC PLAYER ⢠Listen to Stereo Music via A2DP (non-mobile phone device) 7.3 MUSIC STREAMING VIA A2DP IMPORTANT: If you wish to use a mobile phone and GPS device with the scala rider G9, pair the mobile phone directly to the GPS device. Press and hold the MP3 Button for 2 seconds Press and hold the Volume Up Button for 2 seconds Press and hold the Volume Down Button for 2 seconds Pause/Stop Forward Rewind* 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet 7.4a CONNECTING YOUR MUSIC PLAYER VIA THE AUX The AUX Line-in Port is used to connect a non-Bluetooth audio source with a 3.5 mmâ1â8â stereo jack using the enclosed cable. 7.4 CABLE-CONNECTED MP3 PLAYERS If a Music Player is paired, the scala rider G9 will use it as the default A2DP audio source. 1. Stop the music playback from the current device. 2. Start music playback from the other device. SWITCHING BETWEEN A2DP AUDIO SOURCES *With some phones you may need to repeat this action Press and hold the MP3 Button for 2 seconds Play BASIC FUNCTIONS Available only on AVRCP compatible Bluetooth audio sources 7.3b LISTENING TO MUSIC VIA A2DP NOTE: If Pairing is not completed within two minutes, the scala rider G9 will return to Standby mode. Press and hold the Channel âBâ button for 2 seconds Turn off Radio $0 Preset stations can be saved via the Cardo Community platform online configuration tool or directly from your G9 device. 1. Turn on the Radio. Press and hold the Channel âBâ button for 2 seconds Turn on Radio 8.1 GENERAL FUNCTIONS Your scala rider G9 includes a built-in FM radio with a 6 Preset memory and RDS (Radio Data System). 8. FM RADIO 7.4b LISTENING TO MUSIC VIA THE AUX To listen to music from a cable-connected device, operate the Music Player using its buttons as usual (FF/REW/ PLAY/PAUSE). 1. Verify that the scala rider G9 is turned ON and in Standby mode (single BLUE flash every 3 seconds). 2. Connect the MP3 cable to the Music Playerâs jack and insert the other end of the cable into the AUX Line-in Port. AUX Line-in Port 4** 0$1 %22.-LQGE NOTE: During Scan, tap the Channel âBâ button to Fast Save the current FM station as the current Preset Seek and Save: (Find the next FM station) 1. Press and hold the Volume Up or Volume Down Button for 2 seconds. ⢠Pressing Volume Up searches upwards (higher frequency) for a station ⢠Pressing Volume Down searches downwards (lower frequency) for a station 2. Tap the Channel âBâ button within 20 seconds of finding the FM station to save it as the current Preset. Scan and Save: Scan through FM stations 1. Press and hold the Volume Up button for 5 seconds. The G9 will search upwards (higher frequency) for a station. When a station is found, it can be heard for a few seconds. 2. To stop the scan on this station: Tap the Volume Up Button. 3. Tap the Channel âBâ button within 20 seconds of finding the FM station to save it as the current Preset. 4. To continue scan: Wait for the next station to be found. 8.2 RADIO TUNING 2. Select a Preset number you wish to set (Preset 1 â 6) by tapping the Channel âBâ button until the desired Preset is heard. 3. Find an FM station to save using Seek or Scan (see 8.2 RADIO TUNING). $0 scala riderÂŽ G9 / G9 PowerSet This feature allows your G9 to automatically re-tune to the strongest frequency available for the FM station you are listening to when the first signal becomes too weak. Toggle RDS On/Off (Default: Off) 1. Turn on Radio. 2. Press and hold Volume Up and Volume Down buttons simultaneously for 2 seconds. 8.4 RDS (ALTERNATIVE FREQUENCIES) Turning off your G9 will clear the Automatic Radio Tuning stations and restore the FM Presets. NOTE: These 6 temporary âon the goâ stations cannot be saved and do not replace the FM Presets you may have saved. This feature makes finding new stations fast and easy by automatically creating a temporary list of 6 âon-the-goâ radio stations. 1. Turn on the Radio. 2. Press and hold the Volume Down button for 5 seconds. 3. Your G9 will search upwards (higher frequency) from the current station and store the next 6 FM stations it discovers as âon the goâ stations. 4. If desired, repeat from Step 2 to store the next 6 FM stations as âon the goâ stations. 8.3 AUTOMATIC RADIO TUNING 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet PRODUCTS THAT WERE IMPORTED FROM NORTH AMERICA MUST ALSO BE SERVICED IN THE USA. MULTINATIONAL ELECTRONIC COMMERCE COMPANIES AND ONLINE AUCTION WEBSITES ARE NOT AUTHORIZED TO SELL CARDO PRODUCTS AND PURCHASES FROM SUCH SITES ARE AT YOUR OWN RISK. TO RECEIVE WARRANTY OR CUSTOMER SERVICE, YOU MUST SUBMIT ORIGINAL RECEIPTS FROM AUTHORIZED CARDO DEALERS. IMPORTANT For additional information please visit our website at www.cardosystems.com FAQ: www.cardosystems.com/support/faq or contact us at: support@cardosystems.com Phone: USA and Canada: 1-800-488-0363 International: +49 89 450 36819 10. SUPPORT 15.21 To delete your paired devices (not including âOne+8â pairings): 1. Verify that your G9 is turned ON and in Standby mode (single BLUE flash every 3 seconds). 2. Press and hold the Mobile Button for at least 6 seconds. The G9 will first flash RED. Continue to hold the button until the RED and BLUE lights begin rapidly alternating. 3. Press and hold the Volume Up Button for 2 seconds. 4. The PURPLE light will flash 5 times and then the scala rider G9 will turn OFF, indicating that the Reset was successfully completed. $0 This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC/IC multi-transmitter product procedures. FCC RF Radiation Exposure Statement: 2) this device must accept any interference, including interference that may cause undesired operation of the device. 1) this device may not cause interference and Operation is subject to the following two conditions: ⢠Consult the dealer or an experienced radio/TV technician for help. ⢠Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ⢠Increase the separation between the equipment and receiver. ⢠Reorient or relocate the receiving antenna. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 15.105(b) You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the userâs authority to operate the equipment. Federal Communications Commission (FCC) Statement 11. NOTICES RESET PAIRING 9. TROUBLESHOOTING CONNECTIONS Hearing Loss The contents of this User Guide, including all text, illustrations and drawings are the exclusive intellectual property of Cardo Systems, Inc. (the âCompanyâ) and are protected by copyright laws. They are not in the public domain. Any partial or total reproduction, translation and or dissemination, without the prior written authorization by the Company are strictly prohibited. Any rights not expressly granted herein are reserved. 4** 0$1 %22.-LQGE Cardo Systems Inc., (âCardoâ or the âCompanyâ) notifies you that your complete and undivided attention is required when using a communication device (the âProductâ) while riding. Failure to avoid potentially hazardous situations could result in accident resulting in serious injury or death. WARNING: IMPORTANT SAFETY AND WARRANTY INFORMATION â WAIVER AND GENERAL RELEASE HEALTH WARNINGS: Copyright $0 scala riderÂŽ G9 / G9 PowerSet The Health Industry Manufacturers Association recommends that a minimum separation of about six inches (or 16 cm) to be maintained between a mobile phone or wireless device and a pacemaker to avoid potential interference with the pacemaker. Be sure not to interfere with the functionality of personal medical devices. Pacemakers Most electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals emanating from your wireless equipment. RF Signals Audio devices can cause hearing loss. Employ care and avoid exposure to excessive volume levels that may damage or impair hearing or lead to hearing loss. Permanent hearing loss may occur if Products are used at high volume for prolonged periods of time. No part of the body should come in contact with the antenna during operation of the equipment. Use Product only where safe, and avoid usage at gas stations, fuel depots or around explosives. Use with hearing aids and medical devices only after consulting a physician or specialist. Make sure to install and mount the Product in a stable manner. In some regions or states, the use of mobile communications systems is prohibited or restricted. Check all laws and regulations that apply to your region before using the Product and be mindful that compliance with all laws and regulations is the userâs responsibility. Use the Product in motion only where and in the manner that such devices are permitted by applicable law. The Product should not be used in contravention of local, state or federal laws and regulations. Please check federal, state and local laws and regulations before using your Cardo Product. Exercise all due caution while using this Product and obey all applicable traffic laws. Always ride and use the Product in a safe manner. Do not become distracted by the Product while riding on a vehicle. When riding, always consider road, traffic, terrain and other conditions to maximize safety. Do not operate the Product if it becomes unsafe to do so. Do not perform pairing, linking or similar operations while riding. All publications are intended to address technical capabilities and should not be construed as encouraging the operation of Cardoâs Products in any manner that is unsafe or prohibited by law. Cardo advises you to take all necessary precautions and remain alert to the traffic, weather and all road conditions. It is best to stop away from traffic prior to activating or deactivating the Product or initiating or receiving any calls. The Product is compliant with and adopts the BluetoothÂŽ Specification 2.1 and has successfully passed all interoperability tests that are specified in the BluetoothÂŽ specification. However, interoperability between the device and other BluetoothÂŽ-enabled products is not guaranteed. Declaration of Conformity (DOC) Your Cardo product (the âProductâ) is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Articles 3.1a, 3.1.b and 3.2. The Product is manufactured in accordance with Annex II of the above directive. European CE Notice This equipment complies with the RSS-102 exemption from routine RF exposure evaluation for use in an uncontrolled environment. IC RF Radiation Exposure Statement: 2) this device must accept any interference, including interference that may cause undesired operation of the device. 1) this device may not cause interference and This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: Industry Canada (IC) 6. All plastic surfaces and all other externally exposed parts that are scratched or damaged after purchase. Disclaimer of Warranty This Product is intended to be used only as a communication and entertainment device and should not be used in any location or jurisdiction where its use is prohibited. The warranties and remedies contained herein are exclusive and in lieu of all other warranties express, implied or statutory, including any liability arising under any warranty of merchantibility or fitness for a particular purpose, statutory or otherwise that Cardo specifically disclaims. This warranty gives you specific legal rights which may vary from state to state or from jurisdiction to jurisdiction. Cardo makes no other warranties express or implied beyond those stated specifically herein. This warranty is extended by Cardo solely to the original purchaser and is not assignable or transferable to others. Cardo assumes no obligation or liability for additions or modifications to this warranty unless made in writing and signed by an officer of the company. 4** 0$1 %22.-LQGE scala riderÂŽ G9 / G9 PowerSet This warranty also becomes void if: IMPORTANT: Do not store your Product without charging it from time to time for periods in excess of six months, as this may cause irreversible damage to the capacity of your battery. Your warranty will not cover such events. Batteries are warranted only if the battery capacity falls below 50% of rated capacity or if the battery develops leakage. 5. Defects or damage due to exposure to excessive temperatures, adverse weather conditions, external impacts or spills of food or liquid. $0 In no event shall Cardo be liable for any incidental, special, indirect, punitive, exemplary or consequential damages, whether resulting from the use, misuse, or inability to use this product or from defects in the product, or for any damages whatsoever resulting from the use of the product, whether based on breach of contract, tort (including negligence), product liability or otherwise even if advised of the possibility of such damages. You acknowledge and agree that the limitations set forth above are fundamental elements of this agreement to which you consent and without which the product would not be provided to you absent such limitations. Some states do not allow certain exclusions of incidental or consequential damages, so the above limitations may not apply to you. LIMITATION OF LIABILITY Cardo disclaims all express and implied warranties with regard to the enclosed device, including without limitation any implied warranties of merchantability, fitness for a particular purpose, and non-infringement. The device and its accessories are provided âas isâ and âas availableâ without warranty of any kind beyond those assumed in the enclosed manual. 4. Products opened, disassembled or repaired by non-authorized parties. 3. Defects caused by improper operation, maintenance, installation, adjustment or modification of any kind (incl. long-term storage without periodic charging of the battery). 2. Defects or damage from misuse, accident or neglect. 1. Defects or damage resulting from the use of this Product in other than its normal and customary manner. Not covered by the warranty: Cardo assumes no responsibility resulting from the use of non-Cardo components or products in conjunction with its Products, and specifically the use of third party chargers or BluetoothÂŽ devices. Furthermore, Cardo is not responsible for any damage to any part of the Product resulting from the use of ancillary equipment not furnished by Cardo which is attached to or used in connection with the Product. d. the Product was purchased from online auctions Subject to the aforementioned, Cardo hereby represents that this Product is warranted to be free from defects in materials or workmanship (proof of purchase and registration required). Within the subject period, Cardo will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacements will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any shipping cost. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs. Subject to the applicable laws and regulations in your jurisdiction, your Product is covered by a Two-Year Limited product warranty from the date of original purchase. Please retain the retail sales receipt and your registration data for proof of purchase. LIMITED WARRANTY If you use any other personal medical device, consult the manufacturer of your device and/ or your physician to determine if it is adequately shielded from interference caused by external RF energy. Your physician may be able to assist you in obtaining this information. Other Medical Devices b. the battery is used in equipment other than the equipment for which it was intended. Some devices may interfere with certain hearing aids. In the event of such interference, you should consult your hearing aid manufacturer to discuss alternatives. c. the Product is used in contravention of its intended purpose a. any of the seals on the case or battery are broken or Product or battery show signs of tampering, Hearing Aids 4** 0$1 %22.-LQGE By using the Product, you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorneys fees) and holding Cardo harmless for any bodily injuries, harm or By using the Product, you will waive substantial legal rights including the right to sue. Please read the following carefully before using the Product. WAIVER AND GENERAL RELEASE Other manufacturers: Cardo is not responsible for and expressly disclaims any responsibility for how Cardo Products are used or misused arising out of use with products, services or information of other vendors. Online Auction Purchases: Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Cardo will not replace missing components from online auction sites. To obtain warranty service, contact Cardoâs product support and obtain an RMA tracking number, or contact your local Cardo authorized dealer. Ship securely with a copy of the original sales receipt which is required as proof of purchase for warranty repairs. The RMA tracking number should be written on the outside of the package. Send the Product freight charges prepaid, to the Cardo address as directed by Cardo. To obtain warranty service, your Product must be registered. Register online at: www.cardosystems.com/registration. Please present the Product, along with your registration number, bill of sale (receipt) at any authorized Service Center or at the store from which you have purchased the Product. Warranty Service Cardo retains the exclusive right to repair or replace (with a new or newly-refurbished replacement Product) the device or software or give a refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. www.cardosystems.com $0 scala riderÂŽ G9 / G9 PowerSet 5. By using the Product, you confirm that you have read this release of liability and fully understand and accept its terms and conditions. You hereby assume all risks and dangers and all responsibility for any losses and/or damages, whether caused in whole or in part by the negligence or other conduct of others, including Cardo. (c) these risks and dangers may arise from foreseeable or unforeseeable causes. (b) these risks may be caused by the negligence of the manufacturers or its agents or any third party involved in the Product; (a) risks exist in using the Product while in traffic, including but not limited to injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that could cause serious disability; 4. You fully acknowledge our warnings and understand that: 3. You confirm that you are physically capable to use the Product and that you have no medical conditions or needs that may infringe upon your abilities to do so in a safe manner. You further confirm that you will not consume any alcohol that may affect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Product. 2. You fully understand and assume the risks in using the Product, including risk of negligent acts or omissions by others. All risks for operating the Product are assumed solely by the user of the Product. 1. You, your heirs, legal representatives, successors or assigns, hereby voluntarily and forever release, discharge, indemnify and hold harmless Cardo from any and all litigation, claims, debts, demands, actions and liability which may arise, directly or indirectly, from using the Product for any distress, pain, suffering, discomfort, loss, injury, death, damages to or in respect to any person or property however caused, WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which may hereafter accrue to you on some future date as a result of said use, to the fullest extent permitted by law. death as well as losses or damages in goods, to any vehicles including your own, or to any property or asset that belong to you or to third parties, any of which may result from using the Product under any circumstances or conditions and irrespective of jurisdiction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Author : moato Create Date : 2012:02:09 10:34:20+02:00 Modify Date : 2012:02:29 12:59:38+02:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2012:02:29 12:59:38+02:00 Creator Tool : Adobe Acrobat 10.1.2 Format : application/pdf Title : QG G9 EN .pdf Creator : moato Document ID : uuid:1a35c160-37ae-420e-8e19-818da0556381 Instance ID : uuid:6e9a8554-cc5f-4aa8-8883-4c4ca5d66908 Producer : GPL Ghostscript 8.64 Page Count : 27EXIF Metadata provided by EXIF.tools