Casio Computer DTX30 Handheld Terminal User Manual DT X30 E 080605

Casio Computer Co Ltd Handheld Terminal DT X30 E 080605

Users Manual

Handheld Terminal㏚㒐仑䱾Portatif TerminalUser’s Guide䚷㏅尹㞝㢇Kullanım KılavuzuSeries亊⎦SerisiBe sure to read “Safety Precautions” inside this guide before trying to use your Handheld Terminal. After reading this guide, keep it in a safe place for future reference.For product detail, refer also to http://world.casio.com/system/pa/UsersGuide/sup85_e.html⢷ℎ䚷㏚㒐仑䱾Ὶ⏜Lj屚⑨ㅔ杀崏㢻尹㞝㢇ᾼ䠓Đⴘ⋷㹷㊞‚榔đă杀崏ⴛ䛱ῚㄛLj屚ⶖ㢻尹㞝㢇⬴✓Ⅼ⳧Lj⁴∨⁙ㄛ╒冒ă㢘⌂‶♐䠓嵵偕ⅰㇾLj嶆╵⪥║枔;http://world.casio.com/system/pa/UserGuide/sup85_e.htmlPortatif Terminali kullanmadan önce kılavuzun içindeki “Güvenlik Önlemlerini” okuyunuz.Kılavuzu okuduktan sonra ileride başvurmak için güvenli bir yere kaldırınız.Ürün detayları için ayrıca şuraya başvurunhttp://world.casio.com/system/pa/UsersGuide/sup85_e.htmlE C Tr中国语Türkçe EnglishDT-X30_E_Hyo1_4.indd 1DT-X30_E_Hyo1_4.indd 1 5/27/2008 10:13:24 AM5/27/2008 10:13:24 AM
Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this manual and specifi cally disclaims any express or implied warranties of merchantability or fi tness for any particular purpose.This Product is equipped with the Brycen BL-RAPPORE Stack and My Wirefree Network Bluetooth User Interface Application, the use of which is governed by a license granted by Brycen Co., Ltd.BLUETOOTH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., LTD.Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.•••未经事先通知Lj可更改本文信息ă卡西欧计算机有限公司对本手册内容或本手册的使用不做任何声明或保证Lj并且对用于任何特定目的的适销性或适用性的明示或默示的保证不予承诺ă• 本產品配備了Brycen BL-RAPPORE Stack和My Wirefree Network Bluetooth User Interface ApplicationLj其使用經Brycen Co.LjLtd.許可並受其限制ă• BLUETOOTH是注冊商標Lj為Bluetooth SIGLjInc.所擁有Lj並授權卡西歐計算機株式會社使用該商標ă• Microsoft和Windows是微軟公司在美國和/或其他國家的注冊商標或商標ăBu belgedeki bilgiler önceden bildirilmeksizin değiştirilebilir. CASIO Computer Co., Ltd. bu kılavuzun içeriği veya kullanımıyla ilgili hiçbir sorumluluk kabul etmez ya da garanti vermez ve ticari değer veya belirli bir amaca uygunluk konusundaki açık ya da zımni her türlü garantiyi reddeder.Bu Ürün, lisansları Brycen Co., Ltd. tarafından verilen Brycen BL-RAPPORE Stack ve My Wirefree Network Bluetooth User Interface Application gerekliliklerine göre donatılmıştır. BLUETOOTH, Bluetooth SIG, Inc. şirketinin sahip olduğu ve lisansı CASIO COMPUTER CO., LTD'ye verilen tescilli bir ticari markadır.Microsoft ve Windows ABD'de ve/veya başka ülkelerde bulunan Microsoft Corporation'ın tescilli ticari ya da ticari markalarıdır.•••DT-X30_E_Hyo1_4.indd 2DT-X30_E_Hyo1_4.indd 2 6/4/2008 8:35:06 PM6/4/2008 8:35:06 PM
E-1ContentsSafety Precautions .........................................................................................E-2Operating Precautions ...................................................................................E-8Important ........................................................................................................E-8Regulatory Information ..................................................................................E-9Handheld Terminal System Confi guration .................................................E-12General Guide ...............................................................................................E-14Loading and Removing the Battery Pack ...................................................E-15Charging the Battery Pack ..........................................................................E-18Attaching the Hand Belt ...............................................................................E-20Confi guring Handheld Terminal Settings ...................................................E-21Adjusting the Laser Light Emission Width .................................................E-22Resetting the Handheld Terminal ................................................................E-24Warning Label ...............................................................................................E-25English
E-2Safety PrecautionsCongratulations upon your selection of this CASIO product. Be sure to read the following Safety Precautions before trying to use it for the fi rst time. Your neglect or avoidance of the warning and caution statements in the subsequent pages causes the danger of fi re, electric shock, malfunction and damage on the goods as well as personal injury.Markings and SymbolsThe following are the meanings of the markings and symbols used in these Safety Precautions. Danger This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. WarningThis symbol indicates information that, if ignored or applied incorrectly, creates the possibility of death or serious personal injury. CautionThis symbol indicates information that, if ignored or applied incorrectly, creates the possibility of personal injury or property damage.A diagonal line indicates something you should not do. The symbol shown here indicates you should not try to take the unit apart.A black circle indicates something you should do. The symbol shown here indicates you should unplug the unit from the wall outlet. WarningDisassembly and Modifi cationNever try to disassemble or modify the Handheld Terminal and its options including battery pack and battery in any way.Abnormal ConditionsShould the Handheld Terminal and/or its options including battery pack and battery become hot or start to emit smoke or a strange odor, immediately turn off the power and contact your dealer or distributor whom you purchased the product from, or an authorized CASIO service provider.xxxx
E-3 WarningDust and MoistureThough the Handheld Terminal is dust and water splash resistant, its options including the battery pack are not. Keep loose metal objects and containers fi lled with liquid away from your Handheld Terminal and the options. Also, never handle the Handheld Terminal and the options while your hands are wet.Laser LightThis product with the integrated laser scanning module scans bar codes using laser light. Never look directly into the laser light or shine the laser light into the eyes. xx WarningInterference with the Operation of Other Equipment (Using Wireless Data Communication) Keep your Handheld Terminal at least 22 centimeters (811/16") away from anyone wearing a pacemaker. Radio waves emitted by the Handheld Terminal can affect the operation of a pacemaker. Before the use in aircraft, be sure to consult with cabin crew for interference the Handheld Terminal emits.Before the use in medical facility, be sure to consult with the facility management or the manufacture of a specifi c medical equipment that the Handheld Terminal may interfere with.xxx CautionForeign ObjectsTake care to ensure that metals or combustible objects are not inserted into the openings of the Handheld Terminal or its options, and not to allow moisture to get inside of them.LocationInstall the cradle properly on a fl at and stable surface so that it cannot fall down onto fl oor.LCD ScreenNever apply strong pressure to the screen or subject it to strong impact. Doing so can crack the LCD Screen.xxx
E-4 WarningAvoiding Traffi c AccidentsNever use your Car Mounted-type Battery Charger while operating a motor vehicle. Park your vehicle in a safe place before performing any operation.Never locate the Car Mounted-type Battery Charger where it might interfere with proper operation of the vehicle.Locate connecting cables as instructed by the manual, avoiding locations that can interfere with driving operations.Car Battery PowerShould the Car Power Cable become damaged, replace it immediately with a new Car Power Cable when using the Car Mounted-type Battery Charger.xxxx CautionInstalling in VehicleTo save your vehicle’s battery from running down, be sure that the Car Power Cable should be unplugged from the cigarette lighter socket when you do not use the Car Mounted-type Battery Charger and that the use of the battery charger should be avoid while the vehicle’s engine is turned off.Do not handle the Car Power Cable with wet hands. Install the Car Mounted-type Battery Charger at location in a vehicle where strong vibration, unstable, excessive of humidity and dust, and under direct sunlight can be avoid. Also, avoid the area where the air bag infl ates or any other area where your safe driving is blocked.Do not leave the Handheld Terminal in vehicle for a long period of time.xxxx
E-5Optional Lithium-ion Battery Pack Danger1HYHUXVHWKH+DQGKHOG7HUPLQDODQGLWVRSWLRQLQFOXGLQJWKHEDWWHU\SDFNDQGEDWWHU\QH[WWRRSHQÀDPHQHDUDVWRYHRUDQ\RWKHUDUHDH[SRVHGWRhigh heat, or leave them for a long period of time in a vehicle parked in direct sunlight.1HYHUXVHWKHEDWWHU\SDFNZLWKDQ\GHYLFHRWKHUWKDQWKH+DQGKHOGTerminal. 1HYHUGLVSRVHRIWKHEDWWHU\SDFNE\LQFLQHUDWLQJLWRURWKHUZLVHH[SRVHLWto heat.1HYHUWUDQVSRUWRUVWRUHWKHEDWWHU\SDFNWRJHWKHUZLWKPHWDOREMHFWVWKDWPD\UHVXOWLQVKRUWLQJSRVLWLYHDQGQHJDWLYH±WHUPLQDOVRIWKHEDWWHU\SDFN%HVXUHWRSODFHWKHEDWWHU\SDFNLQLWVFDVHZKHQHYHUWUDQVSRUWLQJRUstoring it.1HYHUWKURZWKHEDWWHU\SDFNRURWKHUZLVHVXEMHFWLWWRVWURQJLPSDFW1HYHUSLHUFHWKHEDWWHU\SDFNZLWKQDLOVKLWLWZLWKDKDPPHURUVWHSRQLW8VHRQO\WKHVSHFL¿HGEDWWHU\FKDUJHUWRFKDUJHWKHEDWWHU\SDFNxxxxxxx Warning1HYHUSODFHWKHEDWWHU\SDFNLQDPLFURZDYHRYHQRUDQ\RWKHUKLJKYROWDJHdevice.,IWKHDPRXQWRIWLPHSHULRGWKHEDWWHU\SDFNFDQVHUYHEHFRPHVFRQVLGHUDEO\VKRUWHYHQDIWHULWKDVEHHQIXOO\FKDUJHGIRUWKHVSHFL¿HGWLPHperiod, stop using it.6KRXOGWKHEDWWHU\SDFNVWDUWWROHDNRUHPLWDVWUDQJHRGRULPPHGLDWHO\PRYHLWDZD\IURPDQ\QHDUE\ÀDPH/HDNLQJEDWWHU\ÀXLGLVFRPEXVWLEOH6KRXOGÀXLGIURPWKHEDWWHU\SDFNDFFLGHQWDOO\JHWLQWR\RXUH\HVRURQWKHVNLQGRQRWUXELW,PPHGLDWHO\ULQVHLWRIIZLWKFOHDQWDSZDWHUDQGWKHQFRQVXOWDSK\VLFLDQxxxx Caution5HSODFHRQO\ZLWKWKHVDPHW\SHRIEDWWHU\SDFNUHFRPPHQGHGE\&$6,2'LVSRVHRIXVHGEDWWHU\SDFNVDFFRUGLQJWRWKHORFDOUHJXODWLRQ.HHSWKHEDWWHU\SDFNRXWRIWKHUHDFKRIVPDOOFKLOGUHQxx
E-6Power Supply / AC Adaptor WarningDo not use the Handheld Terminal at a voltage other than the specifi ed voltage. Also, do not connect the Handheld Terminal to a multi-plug power strip.Never modify, sharply bend, twist, or pull on the power cord.Never use a detergent to clean AC adaptor and its power cable, especially on the plug and the jack.When using the battery chargers and the cradles, be sure to use the respective AC adaptors. xxxx CautionNever pull on the power cord when unplugging it. Always hold the plug when unplugging it from the wall outlet.Never touch the plug while your hands are wet. Be sure to unplug the power cord from the wall outlet before cleaning the battery chargers and the cradles.Unplug the power cord from the wall outlet whenever leaving the battery chargers and the cradles unattended for a long period.The housing of the AC adaptor can become warm during normal use. At least once a year, unplug the AC adaptor from the wall outlet and clean any dust that builds up between the prongs of the plug. Dust built up between the prongs can lead to the danger of fi re. xxxxxx
E-7Backup Copies of All Important Data CautionNote that CASIO Computer Co., Ltd. shall not be held liable to you or any third party for any damages or loss caused by deletion or corruption of data due to use of the Handheld Terminal, malfunction or repair of the Handheld Terminal or its peripherals, or due to the batteries going dead.The Handheld Terminal employs electronic memory to store data, which means that memory contents can be corrupted or deleted if power is interrupted due to the batteries going dead or incorrect battery replacement procedures. Data cannot be recovered once it is lost or corrupted. Be sure to make backup copies of all important data. One way to do this is to use the separately sold cradles to transfer data to a computer.xx
E-8Operating PrecautionsYour +DQGKHOG7HUPLQDODQGLWVRSWLRQVDUHSUHFLVLRQ. Improper operation or rough handling can cause problems with data storage and other problems. Note and observe the following precautions to ensure proper operation.Do not leave dead battery pack in the Handheld Terminal for a long period.'HDGEDWWHU\SDFNFDQOHDNOHDGLQJWRPDOIXQFWLRQDQGGDPDJHWRWKH+DQGKHOGTerminal. Stop or avoid using the Handheld Terminal and its options in areas andconditions subject to the following.²/DUJHDPRXQWVRIVWDWLFHOHFWULFLW\²([WUHPHKHDWRUFROGRUKXPLGLW\— Sudden temperature change — Large amount of dust ²$IWHUODUJHDPRXQWRIUDLQRUZDWHUIDOOVRQWKH+DQGKHOG7HUPLQDO²3UHVVLQJWKHVFUHHQRUNH\VZLWKH[FHVVLYHIRUFHZKHQXVLQJLQWKHUDLQImportant7KLVJXLGHGRHVQRWLQFOXGHDQ\LQIRUPDWLRQDERXWSURJUDPPLQJDQGGRZQORDGprocedures. See the applicable separate documentation for information about the procedures.After Service6KRXOGWKLVSURGXFWHYHUPDOIXQFWLRQFRQWDFW\RXURULJLQDOUHWDLOHUSURYLGLQJLQIRUPDWLRQDERXWWKHSURGXFWQDPHWKHGDWH\RXSXUFKDVHGLWDQGGHWDLOVDERXWWKHproblem.7KLVPDUNDSSOLHVWR(8FRXQWULHVDQG7XUNH\RQO\xxxx
E-9Regulatory InformationThe USA and CanadaGUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas).NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC WARNINGChanges or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.Caution Exposure to radio frequency radiation (below is for portable device)To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.••••Declaration of ConformityModel Number: HA-G60IO, HA-G62IOTrade Name: CASIOResponsible party: Casio America, Inc. Industrial Handheld DivisionAddress: 10710 Baxter Avenue, Los Altos, California 94024 USATelephone number: 408-738-8220This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.For Users in CanadaThese Class B digital apparatuses comply with Canadian ICES-003.Cet appareil numériqué de la classes B est conformé à la norme NMB-003 du Canada.These devices comply with RSS 210 of Industry Canada (IC).Operation is subject to the following two conditions:(1) These devices may not cause interference, and(2) These devices must accept any interference, including interference that may cause undesired opera-tion of this device.()
E-10L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes :(1) il ne doit pas produire de brouillage et(2) I’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.Exposure to radio frequency radiationThe installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fi eld in excess of Health Canada limits for the general population;consult Safety Code 6, obtainable from Health Canada's website at http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/99ehd-dhm237/index_e.htmlEuropeDECLARATION OF CONFORMITYWe, the under signed, CASIO Europe GmbH, hereby declare that the following equipment:Product: Handheld TerminalModels: DT-X30G, DT-X30GR, DT-X30E and DT-X30RBrand: CASIOare in conformity with all the provisions of the following EC directive with meeting the related test standards:Council Directive: 1999/5/EC (R&TTE Directive):Standards for all models: EN 60950-1: 2001 EN 50371: 2002 EN 301 489-17 v1.2.1 (2002-08) EN 300 328 v1.7.1 (2006-10)Standards for DT-X30G and DT-X30GR only: EN 50360:2002 EN 301 511 v9.0.2 EN 301 489-7 v1.3.1 (2005-11)Hereunder, that this declaration is based on the above standards have been complied fully, constructing into a Technical File and reviewing by the Notifi ed Body, Compliance Certifi cation Services (NB Number; 0984).Certifi cate/Expert Opinion issued by Compliance Certifi cate Services is available.Manufacturer:CASIO COMPUTER CO., LTD.6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, JapanRepresentative within the European Union:CASIO Europe GmbHBornbarch 10, 22848 Norderstedt, Germany
E-11Products are for distribution within all member states of the EU.France limited to 2446.5-2483.5 MHz Indoor use.Belgium limited to 2400-2483.5 MHz Indoor, 2460-2483.5 MHz Outdoor use.09840984The information described above dates from January 2008 and may be subjected to future changes.Optional models HA-G60IO, HA-G62IO, HA-G30CHG, HA-G32DCHG and HA-G21BAT are in conformity with the Council Directive 2004/108/EC.Manufacturer:CASIO COMPUTER CO., LTD.6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, JapanRepresentative within the European Union:CASIO EUROPE GmbHBornbarch 10, 22848 Norderstedt, GermanyDeclaration of compliance with other relevant standards can be referred to at http://world.casio.com/system/pa/UsersGuide/sup85_e.html.
E-12Handheld Terminal System ConfigurationPlease check the contents in the box before using the Handheld Terminal for the first time.Handheld TerminalUser's Guide (this manual) Bundled ItemsDT-X30 SeriesDT-X30 SeriesHand Belt StylusThe stylus is attached to the Handheld Terminal.OptionsUSB CradleHA-G60IOCar Mounted-typeBattery ChargerHA-G35CHGEthernet CradleHA-G62IOCradle-type Battery ChargerHA-G30CHGThe illustration shows the USB Cradle(HA-G60IO).)RUWKHODWHVWRSWLRQVOLVWUHIHUWRWKH21/,1(PDQXDODYDLODEOHDWKWWSZRUOGFDVLRFRPV\VWHPSD8VHUV*XLGHVXSBHKWPO
E-13 Power Cord for Europe AC-CORD-EU Power Cord for North America AC-CORD-US Power Cord for Taiwan AC-CORD-TW Power Cord for Korea AC-CORD-KR Power Cord for Australia AC-CORD-AUScreen Protect SheetHA-G90PS5HA-G20BAT(Battery Pack) Dual Battery Charger HA-G32DCHGBattery Pack AC Adaptor for USB Cradle/Ethernet Cradle/ Dual Battery Charger AD-S42120B-NOptionsCable DT-380USBSoft Case
E-14General GuideLeft Front Right BackTOPBottom18 1914151 234695781012111314161719 18202122231424242614262527Battery compartment29281 Speaker 11 Numeric Keys 21 Camera Lens (Camera models)2 Indicator 1 12 Fn Key 22 LED (Camera models)3 Indicator 2 13 Function Keys 23 Expansion Port4 Screen 14 Hand Belt Holes 24 Battery Pack Cover Lock Switch5 Microphone 15 L Trigger Key 25 Battery Pack Cover6 Power Key 16 R Trigger Key 26 Strap Holes7 CLR Key 17 IR Port 27 Power Contacts8 Center Trigger Key 18 Barcode Reader 28 MicroSD Card Slot9 Enter Key 19 Stylus 29 SIM Card Slot (WWAN models)10 Cursor Keys 20 Reset Switch
E-15Loading and Removing the Battery Pack<RXU+DQGKHOG7HUPLQDOXVHVWZRW\SHVRIEDWWHU\DEDWWHU\SDFNDQGDPHPRU\EDFNXSEDWWHU\7KHEDWWHU\SDFNLVXVHGWRSRZHUQRUPDORSHUDWLRQVDQGWRVWRUHGDWDZKLOHWKHPHPRU\EDFNXSEDWWHU\EXLOWLQSURYLGHVWKHSRZHUUHTXLUHGWRPDLQWDLQPHPRU\FRQWHQWVZKHQWKHEDWWHU\SDFNSRZHULVXQDEOHWRVXSSO\SRZHUIRUVRPHUHDVRQ:KHQWKHEDWWHU\SDFNSRZHUJRHVORZLPPHGLDWHO\FKDUJHLWRUUHSODFHLWZLWKDFKDUJHGEDWWHU\SDFN<RXFDQXVHHLWKHU'XDO%DWWHU\&KDUJHU&UDGOHW\SH%DWWHU\&KDUJHU86%&UDGOHRU(WKHUQHW&UDGOHWRFKDUJHDEDWWHU\SDFN6HHWKHUHVSHFWLYHXVHU¶VJXLGHVIRUinformation about how to charge.Important!Remaining capacity on a battery pack when you purchase it may be depleteddue to testing at the factory or natural discharge during shipment and storage.Be sure to charge the battery pack before you use it.The life of a battery pack is limited, and charging a battery pack causes it togradually lose its ability to maintain the charge. If your battery pack seems torequire charging very frequently, it probably means it is time to purchase a new one.If a battery pack is used past the end of its service life, it may swell up in size. Insuch a case, replace the battery pack with a new one.When the battery pack is attached, it takes 30 minutes for the backup battery toobtain enough charge for maintaining memory (RAM) contents for 10 minutes.It takes four days for the backup battery to achieve a full charge.xxxx
E-16Loading7XUQRYHUWKH+DQGKHOG7HUPLQDO5HPRYHWKHEDWWHU\SDFNFRYHUDVIROORZV 6OLGHWKHOHIWDQGULJKWORFNVZLWFKHVIRUWKHEDWWHU\SDFNFRYHUWRWKH³)5((´position. +RRN\RXU¿QJHUWLSVLQWRWKHQRWFKHVLQWKH+DQGKHOG7HUPLQDODQGOLIWWKHEDWWHU\SDFNFRYHUXSLQWKHGLUHFWLRQLQGLFDWHGE\WKHDUURZNotchNotch/RDGDEDWWHU\SDFN+$*%$77DNHFDUHWKDWWKHEDWWHU\SDFNLVRULHQWHGFRUUHFWO\ZKHQ\RXORDGLW,QDGGLWLRQORDGWKHEDWWHU\SDFNZKLOHPDNLQJVXUHWKDWWKHHQGRIWKHEDWWHU\SDFNUHPRYDOWDSHLVSURWUXGLQJDERYHWKHEDWWHU\SDFN3XWEDFNWKHEDWWHU\SDFNFRYHULQWKHFRPSDUWPHQWDVLQVWUXFWHGE\WKHDUURZVand LQWKHLOOXVWUDWLRQDQGWKHQUHWXUQWKHEDWWHU\SDFNFRYHUORFNVZLWFKHVWRWKH³/2&.´SRVLWLRQ
E-17Removing0DNHVXUHWKDWWKH+DQGKHOG7HUPLQDOLVWXUQHGRII ,IWKHSRZHULVRQSUHVVWKHSRZHUNH\WRWXUQLWRII7XUQRYHUWKH+DQGKHOG7HUPLQDO5HIHUWR³/RDGLQJ´RQWKHSUHYLRXVSDJHDQGUHPRYHWKHEDWWHU\SDFNFRYHU5HPRYHWKHEDWWHU\SDFNE\SXOOLQJXSWKHUHPRYDOWDSHDVVKRZQLQWKHLOOXVWUDWLRQImportant!When removing the battery pack, be sure you carefully follow the properprocedure as explained in this guide.Before starting to use the Handheld Terminal, ensure that the battery pack coveris properly closed. If not, the power is not turned on or is turned off abruptlywhile it is in use.xx
E-18Charging the Battery PackTo charge the battery pack, use one of the cradles and the battery chargers following the procedure described below. Be sure to use the separately sold AC adaptor (AD-S42120B-N) to power the cradle or charger.Or, if you use the Car Mounted-type Battery Charger in a vehicle, use the accompanied Car Power Cable to power the charger.USB Cradle/Ethernet Cradle/Cradle-type Battery ChargerThe power LED on the front of the Cradle will light green if the Handheld Terminal has been properly mounted.Status of Indicator 1 on DT-X30:Orange: ChargingRed: Standby due to battery pack error or the surrounding temperature is out of the charging temperature range(charging begins when the temperature is within the charging temperature range)Green: Charging completeDual Battery ChargerTaking care that the battery pack is oriented correctly, insert it into the Dual Battery Charger.This causes the Charge Indicator LED to light in red, indicating that charging has started.Status of Charge Indicator LEDOff: Not chargingRed: Charging
E-195HG)ODVKLQJ %DWWHU\SDFNSUREOHP*UHHQ &KDUJLQJFRPSOHWH*UHHQ)ODVKLQJ6WDQGE\GXHWRWKHVXUURXQGLQJWHPSHUDWXUHEHLQJEH\RQGWKHVSHFL¿HGWHPSHUDWXUHUDQJH$SSUR[LPDWHO\&FKDUJLQJresumes when the temperature reaches the range.)Car Mounted-type Battery Charger3OXJLQWKH&DU3RZHU&DEOHDFFRPSDQLHGLQWKHER[WRWKH&DU0RXQWHGW\SH%DWWHU\Charger as illustrated below and the other end to the cigarette lighter socket in vehicle.7KHSRZHU/('RQWKHIURQWRIWKH&DU0RXQWHGW\SH%DWWHU\&KDUJHUZLOOOLJKWUHGLIWKH+DQGKHOG7HUPLQDOKDVEHHQSURSHUO\PRXQWHGStatus of Indicator 1 on DT-X30:2UDQJH &KDUJLQJ5HG 6WDQGE\GXHWREDWWHU\SDFNHUURURUWKHVXUURXQGLQJWHPSHUDWXUHLVRXWRIWKHcharging temperature rangeFKDUJLQJEHJLQVZKHQWKHWHPSHUDWXUHLVZLWKLQWKHFKDUJLQJWHPSHUDWXUHUDQJH*UHHQ &KDUJLQJFRPSOHWH
E-20Attaching the Hand BeltThe hand belt can be used to prevent the Handheld Terminal from dropping when carrying it around. Attach the hand belt according to the procedure described below.To attach the hand belt1. Thread the belt through the hand belt hole as shown in the fi gure. Then fold it back and secure using the hook-loop fastener.2. Thread the other end of the belt through the hand belt hole and adjust the length so that it fi ts comfortably on your hand. Then secure using the hook-loop fastener.Important!Stick the hook-loop fastener down straight.Ensure that the folded-back part does not overlap.See "Bad" example at right. Good Bad Badxx
E-21Configuring Handheld Terminal SettingsCalibrating Touch Screen Alignment:KHQHYHUWKHUHVSRQVHRIWKHWRXFKVFUHHQLVSRRURUWKHRSHUDWLRQVEHLQJH[HFXWHGGRQRWPDWFKZLWKWKHORFDWLRQ\RXDUHWDSSLQJRQWKHWRXFKVFUHHQSOHDVHUHFDOLEUDWHWKHalignment of the touch screen using the following method.3UHVVWKH³)Q´NH\DQGWKHQSUHVVWKH³´NH\DIWHUFRQ¿UPLQJWKDW³)´LVGLVSOD\HGLQWKHORZHUULJKWFRUQHURIWKHVFUHHQ7KHIROORZLQJVFUHHQLVGLVSOD\HG 7KHVFUHHQFDQDOVREHGLVSOD\HGE\QDYLJDWLQJWR6WDUW Settings 6W\OXVCalibration.3UHVVWKHVW\OXVDJDLQVWWKHFHQWHURIWKHWDUJHWPDUNPDUNDVLQGLFDWHGRQWKHVFUHHQ7KHVFUHHQVKRZQEHORZDSSHDUVDIWHU\RXSUHVVWKHVW\OXVDJDLQVWWKHWDUJHWDW¿YHGLIIHUHQWORFDWLRQV3UHVVWKH(QWHUNH\RUWDSDQ\ZKHUHRQWKHWRXFKVFUHHQxxx
E-22Adjusting the Laser Light Emission WidthThe emission width of the laser light emitted by the Handheld Terminal can be adjusted. Adjust the emission width when it has been changed.1. Tap the menus in order of Start  Settings  Control Panel. The Control Panel appears as shown in the screen.2. Double-tap the [Scanner Setting] icon. The Setting screen appears as shown in the screen.3. Tap the [Others] tab in the Scanner Setting screen.
E-237DSWKH>&DOLEUDWLRQ@EXWWRQ7KHGLVSOD\DSSHDUVDVshown at right.3UHVVWKH7ULJJHU.H\WRHPLWODVHUOLJKWDQGDOLJQWKHlight with the barcode for adjusting emission width.Align the laser light with the narrow bars on both sides.The message appears as shown at right when adjustment is completed.5HSHDWWKHVHWWLQJLI³6HWWLQJIDLOHG´PHVVDJHDSSHDUVEmission Width Adjustment Bar codexxx
E-24Resetting the Handheld TerminalResetting the Handheld Terminal is the same as resetting a PC. Performing a reset causes all unsaved inputs and edits to be lost, but data that is already stored in the memory as well as all settings should be unaffected.Use reset to restore normal operation whenever the Handheld Terminal operates abnormally due to misoperation or some other reason.Use a stylus to press the reset switch on the back of the DT-X30.This starts the reset operation.Do not use a toothpick or pencil or other sharp object whose tip may break off the reset switch.If reset does not fi nd a memory problemThe Handheld Terminal restarts, and normal operation is restored.If reset fi nds a memory problemA message like the one shown below appears on the display when the reset operation discovers a memory problem.R TriggerKeyWhen this message appears, press the Trigger key to continue with the reset operation. *
E-25Warning LabelLaser BeamThis label is a warning and caution label for Class 2 laser products that comply with IEC60825-1:1993+A1:1997+A2:2001.Although Class 2 laser light is only emitted momentarily, never look directly into the beam light.The laser light emitted by this laser scanner has a maximum output of less than 1 mW and a wavelength of 650 nm.Use of controls or adjustments or performance of procedures other than those specifi ed herein may result in hazardous radiation exposure. Warning! Never look directly into the laser light.This product with the integrated laser scanning module scans bar codes using laser light. Never look directly into the laser light or shine the laser light into the eyes. xxxxx
CASIO COMPUTER CO., LTD.6-2, Hon-machi 1-chomeShibuya-ku, Tokyo 151-8543, JapanPrinted on recycled paper.PN430053-001MO0806-000501-A Printed in Japan

Navigation menu