Cavanagh Group CGHK-1 HOLIDAY dj Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2008682
Application ID	NqkEUOfUKkaGdjQp2qc7pg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.71kB (346327 bits)
Date Submitted	2013-07-04 00:00:00
Date Available	2013-07-04 00:00:00
Creation Date	2013-06-07 15:33:19
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2013-06-07 15:33:20
Document Title	User manual
Document Creator	Adobe InDesign CS5.5 (7.5.3)

HOLIDAY DJ
INSTRUCTION
MANUAL
IMPORTANT SAFTY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
ELECTRIC SHOCK HAZARD – is intended to alert the user to the
presence of uninsulated dangerous voltage with the product’s
enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to person.
“WARNING”  “To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.”
“WARNING” “Apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be placed on
the apparatus.”
“WARNING” “An apparatus with Class 1 construction shall be connected
to a mains socket outlet with a protective earthing connection.
11. Only use attachments/accessories specified by the manufacturer.
Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable. The marking label is provided on the bottom of the
apparatus.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
USE AND CARE INSTRUCTIONS
13. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
1. When the product is used with a live tree, the tree should be well maintained
and fresh. Do not use with live trees in which the needles are brown or break
off easily. Keep the tree holder filled with water.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
P1.
WARNING – is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the
literature accompanying the product.
2. The tree should be well secured and stable.
3. Before using or reusing, inspect product carefully. Discard any products that
have cut, damaged, or frayed wire insulation on cords, loose connections, or
exposed copper wire.
P2.
4. When storing the product carefully remove the product from wherever it is
placed, including trees, branches, or bushes, to avoid any undue strain or 		
stress on the product conductors, connections, and wires.
5. When not in use, store neatly in a cool, dry location protected from sunlight.
WARNING
When using the HOLIDAY DJ, basic safety precautions should always be followed.
This product has a socket for external devices to be plugged in. Please note that
the corresponding socket is intended for use ONLY with seasonal light strings and
pre-lit Christmas trees.
CONNECTING LIGHT STRINGS
MAXIMUM CAPACITY 420 WATTS
If connecting to a light string that does not have a Wattage (W) rating, calculate the
wattage as follows: Multiply the current which is on the flag-type tag by 120.
For example, the light string label as in 0.08A. Therefore, the Wattage of the
corresponding light string is 0.08A x 120V = 9.6W. Therefore, the maximum number
of cascaded light string is 420W/ 9.6W = 43.75 which mean no more than 43 light
string (with 9.6W) to be cascaded.
WARNING
DO NOT CONNECT LIGHT STRINGS OR SETS IN EXCESS OF THE ABOVE
CAPACITY. ALSO, DO NOT PLUG IN ANY OTHER APPLICANCE OR EQUIPMENT
APART FROM THE LIGHT STRINGS.
INSTALLATION
Notes: It may be useful to check your light strings for missing or faulty bulbs before
setting up your HOLIDAY DJ. If your light strings are not working, your light show
will not function as intended. For ease of installation, it is advisable to check that
you holiday lights do not exceed 420 Watts and to hang your holiday lights on your
tree before connecting your HOLIDAY DJ.
P3.
Capacity:Your HOLIDAY DJ has a capacity of 420 Watts. Please refer to the
instruction manual on your holiday lighting to determine the exact wattage of each
item being plugged into the unit. THIS PRODUCT IS ONLY RECOMMENDED FOR
USE WITH UL LISTED ITEMS. To ensure that you do not to exceed the Holiday DJ’s
420 Watts capacity, add the wattage of each item being plugged into the unit for
the TOTAL WATTAGE. Please refer to the “CONNECTING LIGHT STRINGS” section
as mentioned.
WARNING
DO NOT EXCEED 420 WATTS
QUICK START GUIDE
Synchronizing holiday music, sound effects, and lights is a cinch with Holiday DJ.
Here’s how:
• Plug Holiday DJ into any 120V AC outlet and your pre-lit tree or light strings into
the three-pronged outlet on the back of the Holiday DJ. Be certain that the total
wattage does not exceed 420 watts (See “Connecting Light Strings” section for
more information)
• Press and hold the power button on the front to turn on Holiday DJ
• Go to “Biuetooth” on your compatible device
• Click “Scan for Devices”
• Select “Holiday DJ”
• Start streaming any songs in your personal music library and the lights will flash
to the beat of the music
Then:
• Go to www.holidaydj.com to register as a product owner
• Download the Free DJ Mixer App and check out the video
• You can also download Free Christmas Lightshow Music as well as a library of
Christmas and Halloween sound effects that you can mix with your music to
tream through the Holiday DJ
• Create “beat pulsing” and other fabulous effects with the mixer
P4.
Holiday DJ works with any “smart” Bluetooth-enabled device * on lOS,
Android, or Windows 8 platforms
You can use Holiday DJ with :
•Phone® , iPad® , iPod® , iPod touch®
•Android phones and tablets, Bluetooth® -enabled Mp3 players
•Windows-enabled phones, tablets, PCs
*Or use 3.5mm audio input for non-Bluetooth-enabled devices
Join the Holiday DJ community!
When you register at www.holidaydj.com you can access everything you need to
create unforgettable holiday displays and parties. Mix music, lights and sound
effects for Christmas, New Year’s, Halloween and other parties.
•
•
•
•
FREE mixer app combines music and sound effects
Fabulous Christmas tree light show
FREE library of Christmas music
FREE library of Halloween sound effects
Share the fun!
• Upload a video to show off your fabulous party effects, enter a Holiday DJ
contest ,and interact with other Holiday DJ users!
ADDITIONAL OPERATING INSTRUCTIONS AND FAQ
1. Place the HOLIDAY DJ at the bottom or next to the Christmas Tree. You also 		
can use the HOLIDAY DJ as the party speaker.
2. Plug your holiday lighting into the outlet provided on the unit. shown in figure 1.
(MAX CAPACITY is 420 WATTS. DO NOT PLUG IN ANY OTHER ELECTICAL
GOODS OTHER THAN THE HOLIDAY LIGHTS AND PRE-LIT TREES).
3. Plug the HOLIDAY DJ line cord into a 120V AC indoor outlet.
P5.
figure 1 – Plug the lighting into the black outlet.
BLUETOOTH OPERATION
1. Press and hold the power button (as shown in figure 2) of the HOLIDAY DJ
until you hear the “beep-beep” tone. This indicates the HOLIDAY DJ has
entered its discoverable mode. The HOLIDAY DJ will also attempt
reconnection to the last four devices it was connected to while in its
discoverable mode. If there is a device that the Holiday DJ was previously
connected to within 33 feet, HOLIDAY DJ will automatically connect to this
device. To prevent this from happening turn off the Bluetooth connection on
any device that you have connected the Holiday DJ to after you are done
using it.
2. To connect to a new device, please activate Bluetooth on the desired mobile
phone, tablet or computer and be sure that the device is within 33 feet of
Holiday DJ. The words “Holiday DJ” will appear on the list under Select
Device. if HOLIDAY DJ does not appear try turning Bluetooth off and then on
again, and be sure that the device is within 33 feet of the Holiday DJ.
P6.
3. The incandescent light bulbs, or LEDs. will turn on iindicating that the
connection from your selected Bluetooth-enabled device and the Holiday Dj
has been successfully completed.
4. Stream and play the music from your Bluetooth devices through the HOLIDAY DJ.
The connected lights will flash to the beats of the streamed music.
5. Holiday DJ has 15 volume levels. By pressing the Volume Up or Volume Down
buttons (as shown in figure 2), you can adjust the volume to your desired level.
Please note that a “beep-beep” tone will occur when the volume hits its
maximum level.
2. Once the analog input is plugged into the HOLIDAY DJ the incandescent light
bulbs or LEDs will light up and stay on.
3. Play music from the analog audio source through the HOLIDAY DJ. The
connected lights will flash to the beats of the music.
4. Press the Volume Up or Volume Down buttons to adjust the sound volume.
Figure 3 – Showing the 3.5mm analog audio input
Figure 2 – Showing the Buttons Control
P7.
FREQUENTLY ASKED QUESTIONS
ANALOG AUDIO INPUT
1. Why can’t I hear music as soon as I turn the HOLIDAY DJ on and can see that
its Blue LED lights are on?
1. HOLIDAY DJ has a 3.5mm jack analog input (as shown in figure 3) which can
be used to connect it to any device that has an analog audio output (3.5mm
connector cable is required, and not included with purchase of Holiday DJ).
Please turn off the Bluetooth connection on any devices within 33 feet of the
Holiday DJ when using the analog input mode.
	Answer: HOLIDAY DJ only works in conjunction with a Bluetooth-enabled
(also called “smart”) device (mobile phone/tablets/PCs). When successfully
connected to Holiday DJ, your smart device will show “connected” on its
screen. Please also make sure that your Bluetooth-enabled device is within 33
feet of the HOLIDAY DJ.
P8.
2. Why aren’t my lights flashing when music is playing through the HOLIDAY DJ?
Answer: First make sure your lights are in proper working order. If your lights
are in proper working order, try turning up the volume on the Holiday DJ to
be sure that it is picking up the beats of the music. You may also want to
consider whether the song playing has a lot of beats – if it does not, then the
light flashing synchronization will not work.
3. There is no music playback when the analog plug is being used.
	Answer: Please make sure that all Bluetooth-enabled devices have the
Bluetooth function turned off. In addition, confirm that the audio input cable is
3.5mm and not a different size.
Warranty
Cavanagh Group warrants to the original consumer/purchaser of the Holiday DJ
that it will be free from defects in material and workmanship for a period of 90 days
from the date of purchase. Any liability of Holiday DJ under this warranty shall be
limited to the repair or replacement of defective parts without charge if the item is
returned with shipping charges prepaid together with proof of date-of-purchase,
name and mailing address of the original consumer/purchaser and a description of
the defect.
For a claim number and instructions on how and where to return the item please
call warranty service at:
Federal Communications Commission
Code Part 15
WARNING
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void user authority to operate equipment.
NOTES: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protections against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If the equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to correct
the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to an outlet on a circuit different from that which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Holiday DJ shall not be liable for any other damages or loss. Some states do not allow
the exclusion or limitation of incidental or consequential damages. Accordingly, the
limitation or exclusion may not be applicable to certain consumers/purchasers.
This warranty does not cover defects caused by damage in transit, abuse, accident,
negligence or repairs made by others. This warranty gives the consumer/purchase
specific legal rights. The consumer/purchaser may also have other rights which vary
from state to state.
P9.
P10.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c003 61.141987, 2011/02/22-12:03:51
Create Date                     : 2013:06:07 15:33:19-04:00
Metadata Date                   : 2013:06:07 15:33:20-04:00
Modify Date                     : 2013:06:07 15:33:20-04:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.3)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 4524 bytes, use -b option to extract), (Binary data 8468 bytes, use -b option to extract)
Instance ID                     : uuid:33c8a173-ab2d-6a44-aec8-a6ce573bc45f
Document ID                     : xmp.did:76A22FE611206811822AAA73745E9B12
Original Document ID            : xmp.did:76A22FE611206811822AAA73745E9B12
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:76A22FE611206811822AAA73745E9B12, xmp.iid:78A22FE611206811822AAA73745E9B12, xmp.iid:79A22FE611206811822AAA73745E9B12, xmp.iid:7AA22FE611206811822AAA73745E9B12, xmp.iid:A86FC41B33206811822AAA73745E9B12, xmp.iid:A96FC41B33206811822AAA73745E9B12, xmp.iid:AA6FC41B33206811822AAA73745E9B12, xmp.iid:AB6FC41B33206811822AAA73745E9B12, xmp.iid:FA7F117407206811822A99D075B72578, xmp.iid:7DB93F7C2B2068118083BEBAE5ED9C9E, xmp.iid:9C2221A3492068118083BEBAE5ED9C9E, xmp.iid:9D2221A3492068118083BEBAE5ED9C9E, xmp.iid:3561E9FA562068118083BEBAE5ED9C9E, xmp.iid:AB0D92135E2068118083BEBAE5ED9C9E, xmp.iid:B5F6DAE65F2068118083BEBAE5ED9C9E, xmp.iid:A6BA9D10602068118083BEBAE5ED9C9E, xmp.iid:A7BA9D10602068118083BEBAE5ED9C9E, xmp.iid:DAD03533672068118083BEBAE5ED9C9E, xmp.iid:28CFC2C7672068118083BEBAE5ED9C9E, xmp.iid:87DEDA5F682068118083BEBAE5ED9C9E, xmp.iid:DC52E488682068118083BEBAE5ED9C9E, xmp.iid:EB8DDE85692068118083BEBAE5ED9C9E, xmp.iid:C8A19AA7692068118083BEBAE5ED9C9E
History When                    : 2013:06:04 10:46-04:00, 2013:06:04 11:08:41-04:00, 2013:06:04 11:08:41-04:00, 2013:06:04 11:12:27-04:00, 2013:06:04 11:24:21-04:00, 2013:06:04 11:28:19-04:00, 2013:06:04 11:46:12-04:00, 2013:06:04 11:55:18-04:00, 2013:06:05 10:41:17-04:00, 2013:06:07 11:03:01-04:00, 2013:06:07 11:34:26-04:00, 2013:06:07 12:32:51-04:00, 2013:06:07 13:10-04:00, 2013:06:07 14:00:49-04:00, 2013:06:07 14:13:54-04:00, 2013:06:07 14:15:04-04:00, 2013:06:07 14:20:27-04:00, 2013:06:07 15:06:10-04:00, 2013:06:07 15:10:19-04:00, 2013:06:07 15:14:34-04:00, 2013:06:07 15:15:43-04:00, 2013:06:07 15:22:48-04:00, 2013:06:07 15:23:45-04:00
History Software Agent          : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 1241
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 7
Creator                         : Adobe InDesign CS5.5 (7.5.3)

EXIF Metadata provided by EXIF.tools