Chamberlain Group The 2378 Remote Control Transmitter User Manual Exhibit D Users Manual per 2 1033 b3

Download:
Mirror Download [FCC.gov]
Document ID	831299
Application ID	9Vvg2F3jLjd0Aer7lTVqOQ==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.95kB (149402 bits)
Date Submitted	2007-08-20 00:00:00
Date Available	2007-08-20 00:00:00
Creation Date	2007-07-24 08:33:21
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2007-08-08 08:41:08
Document Title	Exhibit D Users Manual per 2 1033 b3
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	scoates

Smart-Learn Button Opener
KLIK2U
SELECT PIN NUMBER
Choose a 4-digit Personal Identification Number (PIN). Any combination
of numbers from 0 to 9 may be used.
Dip Switch Opener
Write PIN here: ___ ___ ___ ___
ID
BRAND
CHAMBERLAIN, SEARS, LIFTMASTER, MASTER MECHANIC, DO IT
- Orange/Red Learn Button
- Purple Learn Button
- Green Learn Button
GENIE, OVERHEAD DOOR (315MHz)
GENIE, OVERHEAD DOOR (390MHz)
LINEAR
STANLEY
WAYNE DALTON
ID
BRAND
11
12
15
19
13
17
14
18
16
CHAMBERLAIN, SEARS, LIFTMASTER, MASTER MECHANIC, DO IT
- 9 Switch Systems, Yellow, White or Grey Learn Button
- 9 Switch Systems, Yellow, White or Grey Learn Button - Canada
- 8 Switch Systems, Yellow, White or Grey Learn Button
- 7 Switch Systems, Yellow, White or Grey Learn Button
GENIE (12 Switch Systems)
GENIE (9 Switch Systems)
LINEAR 10 Switch Systems)
LINEAR, MOORE-O-MATIC (8 Switch Systems)
STANLEY (10 Switch Systems)
PROGRAMMING KEYPAD
1. Write your PIN from above on line 4 and line 7.
2. Write your brand ID from above on line 5.
3. Press * and # together until the keypad stops flashing
4. Enter your PIN ___ ___ ___ ___ and press the # key.
5. Enter your brand ID ___ and press the # key.
6. Press and release smart-learn button on motor unit (indicator light next to
smart-learn button should turn on).
7. Enter your PIN ___ ___ ___ ___ and hold the ‘0’ button on the keypad until the
indicator light next to the smart-learn button blinks or the worklight blinks
(Note – for Genie units, press the ‘0’ button twice).
Programming is complete. Proceed to step 3.
TEST/USE THE KEYPAD
TEST THE KEYPAD
Note – Any unused switch locations should be left blank
To test the KEYPAD wait 15 seconds, enter your PIN and press the ‘0’ button. If
the door does not move and/or the keypad does not flash, repeat step #2.
Examples:
--
Code sequence
would be
--
1 2 3 2 1 2 3
Code sequence
would be
1 2 1 2 1 2 1 2 1 2 1 2
PROGRAMMING KEYPAD
1. Write your PIN from above on line 5.
2. Write your brand ID from above on line 6.
3. Write your code sequence from above on line 7.
4. Press * and # together until the keypad stops flashing.
5. Enter your PIN ___ ___ ___ ___ using the keypad and press the # key.
6. Enter brand ID ___ ___ using the keypad and press the # key.
7. Enter code sequence _________________________ using the keypad and press
the # key.
Programming is complete. Proceed to step 3.
Press * and # together until the keypad stops flashing (approximately 5 seconds).
This erases previous programming and returns the unit to the unprogrammed
factory setting.
KEYPAD FAST & SLOW FLASHING
The keypad will flash rapidly after a correct PIN has been entered and any number
key is pressed. The rapid flashing indicates that the keypad is transmitting your
code. The keypad will flash slowly when there is an error in the programming
sequence.
Once programmed and a valid PIN entered, the keypad remains active for 15
seconds. During this time you may stop, reverse or reactivate the door by
pressing any number on the keypad.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:4c643ea2-8433-4fe7-bd10-c7f31528a4d0
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         : Chamberlain
Source Modified                 : D:20070629021643
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2007:08:08 08:41:08-05:00
Create Date                     : 2007:07:24 08:33:21-05:00
Metadata Date                   : 2007:08:08 08:41:08-05:00
Document ID                     : uuid:722c90f1-ed84-4133-ac83-8a13277d777e
Version ID                      : 2
Format                          : application/pdf
Title                           : 
Creator                         : scoates
Subject                         : 
Tagged PDF                      : Yes
Author                          : scoates

EXIF Metadata provided by EXIF.tools