Charm Winner Co RF-204PU25R Gamepad User Manual

Charm Winner Co Ltd Gamepad

User Manual

Download: Charm Winner Co RF-204PU25R Gamepad User Manual
Mirror Download [FCC.gov]Charm Winner Co RF-204PU25R Gamepad User Manual
Document ID562126
Application IDDeOqlxjol9Fi7yx+K06A3w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize75.36kB (942026 bits)
Date Submitted2005-07-15 00:00:00
Date Available2005-07-15 00:00:00
Creation Date2004-10-28 14:19:41
Producing SoftwareAdobe PDF library 5.00
Document Lastmod2005-03-01 19:38:58
Document TitleUser Manual
Document CreatorAdobe Illustrator 10.0

RF-2.4G Gamepad User’s Manual
Oper ation Reference
1. G amepad Calibration
Before using this gamepad, please rotate the sticks once to calibrate perfectly.
2. Connect Gamepad with Recei ver
Please follow below steps to connect the gamepad with the receiver.
1) Press and hold the Connection/Vibration button of the gamepad until the ModeLED twinkles with orange color.
R F-2.4G PC Combo PS2 Gamepad
2) Press the button of the receiver to connect with each other.
> L E D indicator:
I ntroduction
C ondition
Online
Connection -LED
ON
Off line
C onnecting
OFF
Twinkle & Orange
Thank you for choosing this innovative RF Gamepad. This gamepad not only can be
compatible with both PC and PS, but also be equipped with a high 2.4G RF
technology. To satisfy users this gamepad is expanded the Macro and Turbo function,
users, can perfectly enjoy the convenience and exciting playing with this gamepad.
3. Analog/ Digital S witching
This gamepad is equipped with Digital and Analog modes. And there are some
different features with PC and PlayStation modes in A/D modes as followings:
> PC
Package Contents
Gamepad
Analog
Digital
D-pad
POV HAT
X&Y Axis motion
Gamepad
*1
Left Mini-stick
X&Y Axis motion
POV HAT
Receiver
*1
Right Mini-stick
Throttle& Rudder
Throttle& Rudder
USB Cable
*1
Button 11, 12
Normal function
No function
CD Driver
*1
User Manual
*1
Other Buttons
Normal function
Normal function
Mode-LED Indicator Red
System R equirement
Green
> PlayStation
You can switch between digital and analog modes. The Mode-LED turns ON with
PC
red color in Analog mode and with green color in Digital mode. When the
1. IBM PC 586/PentiumII compatibles or higher
gamepad is in Analog mode, the following buttons and sticks may operate in
2. Available USB port or extension USB hub
Analog fashion depending on the features supported by the software title. Refer to
the software manual for details.
3. CD-ROM drive
4. Microsoft Windows XP/ME/2000/98 recommended
PlayStation2 format software
D-Pad / Χ,○,□,△ / 2 ministicks / L1, L2, R1, R2
PlayStation
1. PlayStation 2 / PSOne / PlayStation
PlayStation f or mat softwar e
2 ministicks
4. V ibration F unction
You can switch the vibration function ON or OFF by pressing the Vibration
Hardwar e Over view
Connection button.
Recei ver
>L E D indicator:
V ibr ation ON
Connection LED
M ode-LED
Low-Battery LED
USB Connector
Twinkle
V ibr ation OFF
ON
Connection Button
1. 1 Connection Button
2. 2 LED Indicator (One is connection indicator and another is low-battery indicator.)
3. 1 USB Connector for PC
5. Macro function
There are four buttons (L2, L3, R2, R3) allowed being set as the macro buttons.
Please follow below steps to set up the macro function.
1) Press the Program button to set up the macro function.
2) Press one of four buttons (L2, L3, R2, R3) which you want to set as a macro
Gamepad
Button6, 8 / R1, R2
Macro/Turbo
Button4 /△
Button2 /○
Button3 /□
Button10/Start
Vibration/Connection
Button1 /Χ
Button9/Select
Button5, 7 / L1, L2
button.
3) Press the buttons (D-Pad, △,Χ,□,○, L1, R1, L2, R2, L3, R3, Start) in turn to
set into the Macro function.
4) Press the Program button again to finish the Macro function setup.
Right stick & button12/R3
> L E D indicator
Mode-LED
Steps of the
A/D
Mac ro set
D-Pad
Left stick & button11/L3
Step 1)
M ode-LED
Orange
Connection-
OFF.
Step 2)
Step 3)
Twinkle & Orange
Step 4)
OFF.
OFF
ON
LED
PC
Eight ways D-Pad
PlayStation
Button 1, 2, 3, 4
Eight ways D-Pad
Χ,○,□,△
Button 5, 6, 7, 8, 11, 12
L1, L2, L3, R1, R2, R3
Button 9, 10
Select, Start
Analog Ministick
Analog/Digital switching button
6. T urbo function
Please follow below steps to set up the Turbo function.
1) Press the Program button.
2) Press the buttons (△,Χ,□,○, L1, R1, Start) which you want to set with the
Turbo function.
Note: If you want to remove the Turbo function, please repeat the above steps.
> L E D indicator
Program (Macro/Turbo) button
Steps of the Turbo set
Vibration/Connection button
Mode-LED
Red/Green/Orange LED indicator
Orange
Connection-LED
OFF
Step 1)
Step 2)
OFF
ON
7. LED Indicator while operating
The Mode-LED indicates as the following table when you press any button:
Mode
Analog
Th e condition of
Or iginal button
Digital
M acro/Tur bo
Or iginal button
M acro/Tur bo
Green
Orange
the button
Pressing
R ed
Orange
Release
Red then OFF
Red then OFF Green then OFF
Green then OFF
Note: If your gamepad is in Vibration mode, the Mode-LED twinkles when
indicating.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
8. Low -battery LED of the receiver
When the Low-battery LED turns ON, please change new batteries.
interference by one or more of the following measures:
Note: The vibration function will be turned OFF automatically when this Low-battery
LED ON.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the
9. Sleep & Wake Up
When you stop operating this gamepad for some time (take a look at the below table), it is
receiver is connected.
become to a “sleeping” mode to prevent consuming the battery. And you can wake up it
- Consult the dealer or an experienced radio / TV technician for help.
by press one of the key-buttons as: Vibration/Connection, A/D, Macro/Turbo, Select, Start.
Condi tion
Online
Time for coming sleeping 2 Min
Offl ine
F unction Setting
15 Sec
1 Min
Warning: As shieded-type power cord is required in order to meet FCC emission
limits and also to prevent interference to the nearby radio and television reception. It
is essential that only the supplied power cord be used.
Installation Only for PC
A lways install the softwar e firs t, then the hardwar e subsequently.
A. Software Ins tallation
This RF-2.4G gamepad is the software needed for your device setup, however, if you
don’t choose to install it, it is still operated without vibration function.
1.
Insert the CD of this gamepad into your CD-ROM; wait for a few seconds for your
computer to load the disc.
2.
If your system is setup to automatically read a new inserted CD, then the auto run
Use only shieded cables to connect I/O devices to this equipment.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
I mmer sion Patent
program is executed and the opening screen for installation appears. Please follow
the on-screen instruction to install this gamepad step-by-step.
3.
If your system doesn’t launch the installation software automatically, please find the
auto execute file “Install bat”, which is located under the directory of your CD drive
and click on it, then follow the on-screen instruction to install this gamepad.
The i nstall ed pr ocedures administer as follows:
“Protected by one or more patents of Immersion Corporation. A list of applicable
patents can be found on Immersion’s website at www.immersion.com.”
> Install Shield Wizard information: The system is ready to install, and click
“Next ”.
> The copyright declares: Select “Agree” and click “Next”.
> User’s information: Key in “User’s name and Company”. If your system
Safety information
is Window 2000/Xp, select an appropriate use limit.
> Confirm to start install: Press “Install”.
> Finish the install: Press “Finish”.
4.
Upon completing software installation, restart your PC as the installation screen
requested.
B . Hard ware Ins tallation
1. Plug the Mini-USB connect of the cable to the port on the receiver and another USB
MODEL: RF-2.4G Gamepad
Gamepad Rating:DC 6.5V/100mA 650mW
Receiver USB mode Rating: DC 5V/60mA 300mW
PS2 mode Rating: DC 3.5V/40mA 140mW
DC 8V/30mA 240mW
connect to the USB port on your computer.
2. After connected the monitor will show “Find a new hardware” and the standard
USB driver will be located for you to finish the easy installation and play games
immediately.
3. The system will add an item of this gamepad in the game-controller board
automatically, and you can test the function of gamepad.
I mpor tance & A ttention
1. When this gamepad is used in PC, please ensure the Joystick ID of it “Joystick 1”, if the
USB port of this receiver is properly plugged but no any work.
2. The functions of all buttons may vary in different games. Before start game setting,
always read your game manual carefully to approach the best game setting.
3. Please use the same brand of batteries to ensure there is a better efficiency.
All brand names mentioned in this manual are trademarks or registered trademarks of their
respective companies.
For more information or any services are required, please visit us through the Internet link
Website:
e-mail:
http://www.r ockfir e.com.tw
service@r ockfir e.com.tw

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 10.0
For                             : Bill, Charm
Title                           : C:\Documents and Settings\BillTu\ୱ\668u\Untitled-1.ai
Create Date                     : 10/28/2004 2:19 PM
Bounding Box                    : 15 19 576 826
Creator Version                 : 10
Container Version               : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:11f55b60-4ab4-45c2-b04e-0dd56e1e2795
Producer                        : Adobe PDF library 5.00
Modify Date                     : 2005:03:01 19:38:58+08:00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2005:03:01 19:38:58+08:00
Document ID                     : uuid:d1b1fe6f-2f73-4fce-b4ed-bb8b78fbc498
Format                          : application/pdf
Image Height                    : 807
Image Width                     : 561
Image Size                      : 561x807
Megapixels                      : 0.453
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K5MRF-204PU25R

Navigation menu