Chengdu Vantron Technology TAB185-SKLU Embedded Computer User Manual 1025
Chengdu Vantron Technology, Ltd. Embedded Computer User Manual 1025
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4058433 |
| Application ID | 7matvXF0vFj5J9OVyBSbaA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 131.88kB (1648490 bits) |
| Date Submitted | 2018-11-02 00:00:00 |
| Date Available | 2018-11-02 00:00:00 |
| Creation Date | 2018-10-25 15:12:49 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2018-11-02 09:19:30 |
| Document Title | Microsoft Word - User?Manual?1025 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
VT‐TAB185‐SKLU VT‐TAB185‐SKLU User’s Manual Chengdu Vantron Technology, Ltd. www.vantrontech.com All Rights Reserved VT‐TAB185‐SKLU Revision History: No. Version V1.0 V1.1 V1.2 V1.3 V1.4 V1.5 V1.6 V1.7 Description First release Modify description of WLAN Modify picture Modify description of battery LED Update LTE Module description Add light sensor, SIM Card, SD Card description Add speaker and MIC description Modify Approvals Date Sep,23, 2017 Oct,18, 2017 Nov,15, 2017 Dec,7, 2017 Feb,5, 2018 May,8, 2018 May,25, 2018 Jun,12, 2018 VT‐TAB185‐SKLU Table of Contents Foreword ..................................................................................... 5 1.1 Copyright Notice ...................................................................... 5 1.2 Notes ............................................................................ 6 1.3 Statement ............................................................................ 6 1.4 Disclaimer ............................................................................ 6 1.5 Limitation of Liability/Non‐warranty ....................................... 6 1.6 Safety Instructions ................................................................... 7 1.7 Precautions ............................................................................ 7 1.8 Safety Instructions for Power Cables and Accessories ............. 8 VT‐TAB185‐SKLU Hardware Instructions ...................................... 10 2.1 Product Appearance .............................................................. 10 2.2 Product Usage Environment .................................................. 12 2.3 Product installation method .................................................. 14 2.4 Specifications ......................................................................... 16 2.5 Interface Instructions ............................................................. 17 2.6 Interface Instructions ............................................................. 19 2.7 Interface Description ............................................................. 20 2.7.1 USB Host Connector ................................................ 20 Software Introduction ................................................................ 22 3.1 About This Manual ................................................................. 22 3.2 Windows OS Support ............................................................. 22 3.3 VT‐TAB185‐SKLU Features...................................................... 23 Driver Installation....................................................................... 24 4.1 Graphic Card Driver ................................................................ 25 3 / 52 VT‐TAB185‐SKLU 4.2 Audio Card Driver................................................................... 27 4.3 Chipset Driver ........................................................................ 29 4.4 TXE .......................................................................... 33 Firmware Update ....................................................................... 34 5.1 BIOS Firmware ....................................................................... 34 5.2 EC Firmware .......................................................................... 34 Module function ........................................................................ 35 6.1 4G Module .......................................................................... 35 6.1.1 Driver Install ............................................................ 37 6.1.2 Dial‐Up ..................................................................... 37 6.2 WIFI Module .......................................................................... 41 6.3 Sensor Tool .......................................................................... 43 6.4 Fan Control .......................................................................... 45 6.5 Bluetooth .......................................................................... 46 Tips ............................................................................................ 47 4 / 52 VT‐TAB185‐SKLU Foreword 1.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual. Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior notice. The latest version of this manual is at www.vantrontech.com.cn. Please contact Vantron for further information: Vantron Technology（Vantron） E‐mail: sales@vantrontech.com The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly‐released copies of this manual. 5 / 52 VT‐TAB185‐SKLU 1.2 Notes Applicable notes are listed in the following table: Sign Notice Type Description Notice Important information and regulations Caution Caution for latent damage to system or harm to personnel 1.3 Statement It is recommended to read and comply with this manual before operating VT‐TAB185‐SKLU which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device. 1.4 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions. 1.5 Limitation of Liability/Non‐warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. The VT‐TAB185‐SKLU should be installed, debugged and maintained by professional people. The unauthorized antennas are not permitted to be installed or to be changed by non‐professional people. To run the device normally, only 6 / 52 VT‐TAB185‐SKLU specific antennas are approved to be assembled together by professional people. 1.6 Safety Instructions Keep and comply with all operation instructions, warnings, and information. Pay attention to warnings on this device. Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device. Operations and Service instructions are provided with the equipment. The maximum operation temperature is 45°C. 1.7 Precautions Pay attention to the product labels/safety instructions printed on silk screens. Do not try repairing this product unless declared in this manual. Keep away from heat source, such as heater, heat dissipater, or engine casing. Do not insert other items into the slot (if any) of this device. • Keep the ventilation slot ventilated for cooling. •System fault may arise if other items are inserted into this device. Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools. Ensure ventilation and smoothness according to relevant ventilation standard. 7 / 52 VT‐TAB185‐SKLU 1.8 Safety Instructions for Power Cables and Accessories Proper power source only: Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source. This product still contains a button lithium battery as a real‐time clock after its external power source is removed and therefore should not be short‐circuited during transportation or placed under high temperature. Place cables properly: Do not place cables at any place with extrusion danger. 8 / 52 VT‐TAB185‐SKLU Cleaning Instructions Please power off before cleaning the device. Do not use spray detergent. Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults: The device is damaged. The temperature is excessively high. Fault is still not solved after the operation according to the manual. 9 / 52 V VT‐TAB185‐SKL LU VT‐TAB185‐‐SKLU Hardw ware Instructtions 2.1 Product Appearance Front View 10 / 52 V VT‐TAB185‐SKLU Side view Back View Bottom view 11 / 52 VT‐TAB185‐SKLU 2.2 Product Usage Environment The embedded computer can be used in many occasions with mounting brackets, such as a box with mounting brackets internal, or fixed directly on the wall with mounting brackets, and so on. Packing in a box can be easy to carry and used in different occasions. Warning: when using the computer in a box such as a box shown as the above photos, people should keep its body at least 20 centimeter far away from the computer. 12 / 52 VT‐TAB185‐SKLLU Fixed d on the wall ffor indoor envvironment 13 / 52 VT‐TAB185‐SKLU 2.3 Product installation method With its mounting bracket, the embedded computer only can be used in the two environments specified by the manufacturer, and one of the ways we describe is to install it in a box, the other is to be installed on the wall. How to install in a specific box: Step 1: we need to install the bottom with its charging socket and two positioning screws of the computer. 14 / 52 VT‐TAB185‐SKLU Step 2: we need to use one hand to pull the bottom of the computer and the other hand to lift the top of the mounting bracket upward so that it can grip the top of the computer. Warning: the installation should be done as above‐mentioned, and the installation should be done lightly and without damaging the equipment. 15 / 52 VT‐TAB185‐SKLU 2.4 Specifications Specifications CPU Memory Display Processor Intel®CoreTM i5-6300U Base 2.4GHz Turbo 3.0GHz Processor( DUAL CORE) On Board RAM On Board DDR4 1333Mhz up to 8GB ROM Internal M.2 2280 SSD, 1TB Display 18.5" 16:9, 2 Channel LVDS LCD, 1920x1080@60Hz LED Back Light, 350cd/ m2 Touch Screen Capacitive Touch Screen, 10 points Camera Front 5M pixel Sensor Ambient light sensor, Accelerometer, magnetometer, gyroscope Memory CardReader MicroSD / micro-SDHC / micro-SDXC(SDXC 3.01) USB 2xUSB3.0 Host (Type A) Wireless/Bluet ooth 802.11 a/b/g/n/ac, 2X M.2 CONN for supporting two WLAN module (PCIE x2 +USB2.0 x2), with 2xMain antenna, and 2xAux Antenna 1x Bluetooth4.2 on 7265 module 1x Bluetooth4.2 on 8265 module(can not work together) LTE module LTE(Band:2/4/5/7/12/13/17/25/26/30/38/41/66) WCDMA/3G(Band:2/4/5) RTC Supported Audio 1xline Out 3.5mm(with MIC),1xSpeaker(right channel) LED indicators Power; Charging Security TPM module OS Windows or Linux Interfaces Software 16 / 52 VT‐TAB185‐SKLU Power Mechanical Environment Condition Applications SDK Available Battery Lithium Ion Battery,4S2P, 15.2V, 3800mAh Pogo Pin DC19V Supply60W(MAX) DC Input DC19V Supply 60W(MAX) Dimensions 283.86x471.86x18.01mm Weight 3.19KG Temperature Operating: 0°C ~ +45°C, Storage: -10~+55°C. Humidity Working 20%~80%, storage 10%~90% Approvals FCC,ISED,CE and UL 2.5 Interface Instructions 18.5” LCD, 1920x1080 With Capacitive TP 5M Camera MIC Light sensor 17 / 52 V VT‐TAB185‐SKL LU Batteryy LED indicaator R Chargingg Red: Turnn off: full charrged DC IN PWR BTN Reset BTN S Card SIM SD Card Power led Reed: power offf Bllue: power onn USB3.0 Audio Volum meBTN Homee BTN Volume+ BTN Pogo Pin CONN 18 / 52 VT‐TAB185‐SKLU 2.6 Interface Instructions 19 / 52 VT‐TAB185‐SKLU 2.7 Interface Description 2.7.1 USB Host Connector Dual vertical USB A type interface, supporting 2xUSB3.0 20 / 52 VT‐TAB185‐SKLU Pin Name Type Description AUSB_VCC +5VDC AUSB_DN IO USB Data1- Signal AUSB_DP IO USB Data1+ Signal AUSB_GND Ground AUSB3.0_RXN IO USB3.0 RECEIVE DATA -Signal AUSB3.0_RXP IO USB3.0 RECEIVE DATA +Signal AUSB3.0_GND Ground AUSB3.0_TXN IO USB3.0 TRANSFER DATA -Signal AUSB3.0_TXP IO USB3.0 TRANSFER DATA +Signal 21 / 52 VT‐TAB185‐SKLU Software Introduction Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state of the art technology and the best product services. Vantron’s products are based on the Intel Atom processors and have low power consumption and high integration. The products are designed for applications of BT35 in industrials, medicals, financial, retail, vehicle, and transportations etc. 3.1 About This Manual This manual is for user how to configure and use devices in Windows Win10 system. 3.2 Windows OS Support The VT‐TAB185‐SKLU supports the following Windows operating systems, and we just introduce Win10 system in this document. Windows* 8 32bit / 64bit Windows* Embedded Standard 8 64 bit (WES8) Windows 10 Desktop/Windows10 IoT Core 22 / 52 VT‐TAB185‐SKLU 3.3 VT‐TAB185‐SKLU Features The below table lists VT-TAB185-SKLU features. Device Name Description Resolution 18.5",2 Channel LVDS TFT, 16:9, 1920x1080,24bit LVDS Contrast 1000:1 Brightness 350 cd/ m2 USB View 89U/89D,89L/89R Angle Touch Cap Touch Screen Screen 2 x 802.11 ac/a/b/g/n Wireless Module with Bluetooth4.0, internal antenna Note: The frequency bands from 5150MHz to 5250MHz for the 2 WLAN modules are designed only for indoor operating. 2xUSB3.0 Host Audio 1xInternal 2W Speaker,1x 3.5mm Combo Jack Micro-SD Support Micro-SD / Micro-SDHC / Micro-SDXC Camera Front 5M Sensor Ambient light sensor, Accelerometer, magnetometer, gyroscope LN940A9, M.2 CONN Wireless Communication LTE module 23 / 52 VT‐TAB185‐SKLU Driver Installation The driver list of WIN10 64bit on VT-TAB185-SKLU as below: Driver Description/Version Driver Path 11.0.6.1194 \Win10 Driver Category TXE \TXE\ME_Corporate_11.0.6.1194.zip Chipset 10.1.1.14 \Win10 Driver \Chipset\Chipset_10.1.1.14_Public.zip Graphic 154028.4501 \WIin10 Driver\Graphic \ Graphics_win64_154028.4501.zip Audio R279 \Win10 Driver\Audio \ 0006-Win7_Win8_Win81_Win10_R279.zip BT 20.10.0 \Win10Driver\BT\BT_20.60.0_64_Win10.exe Wireless 20.10.2 \Win10Driver\ Wireless\WiFi_20.60.0_PROSet64_Win10.exe SIO 163303 Serial Sensor Serial\intel_sio_163303_64_1020n.exe 3.1.0.3429 Hub 4G \Win10Driver\ SIO \Win10 Driver\Sensor\intel_iss_3.1.0.3429_w1064.zip 1.0.1.9 \Win10 Driver\4G\Telit Installer_v1.0.1.9.zip 24 / 52 V VT‐TAB185‐SKL LU 4.1 1 Graph hic Card Driver Driver Installlation: 1 Unzip *.zzip, Double click 1. setup.exxe 2 Show conntent of driveer installationn, Then click “Next 2. “ >”. 25 / 52 V VT‐TAB185‐SKL LU 3 Read Liccense Agreem 3. ment carefullyy, Click “Yes””. 4 Read sysstem requirem 4. ments and installation infformation. Th hen click “Neext >”. 5. Reset systtem. 26 / 52 V VT‐TAB185‐SKL LU 4.2 2 Audio Card Driver Driver Installlation: 1. Unzip 00006-Win7_W Win8_Win81__Win10_R2799.zip 2. Double click setup.exxe. 3. Extract installation fiiles. 27 / 52 V VT‐TAB185‐SKL LU 4. Click “N Next>” 5. Wait forr some while,tthen finish innstallation. 28 / 52 V VT‐TAB185‐SKL LU 4.3 3 Chipse et Drive er Driveer location: \W Win10 Driverr\Chipset\ chipset_10.1.1.14_public.zip 1. Unzip chipset_10.1.1.14_publicc.zip, Doouble cliick “SetuupChipset.exe”. Then clickk “Next>” 29 / 52 V VT‐TAB185‐SKL LU 2. Reead License aagreement, cliick “Accept”. 30 / 52 V VT‐TAB185‐SKL LU 2. Show system m requirement and Click “Install”. 31 / 52 VT‐TAB185‐SKLLU 4. W Wait for some m minutes, drivver is OK. 32 / 52 VT‐TAB185‐SKLLU 4.4 TXE 1. Reead License agreement, cliick “Install”. 2. Reset systtem. 33 / 52 VT‐TAB185‐SKLU Firmware Update Warning: If Vantron needs to update EC and/or BIOS, please follow the following steps: 1． Upgrade BIOS firmware first 2． Press power button to turn off the machine 3． Press power button to turn on the machine 4． Then upgrade EC firmware 5． Press power button to turn off the machine 6． Press power button to turn on the machine Otherwise, it may lead to can’t boot problem (low probability event). 5.1 BIOS Firmware For flash details, see \Firmware\BIOS\* 5.2 EC Firmware For flash details, see \Firmware\EC\* 34 / 52 VT‐TAB185‐SKLU Module function This section describes the use of some modules, such as 4G module and Rotate Screen. 6.1 4G Module We use LN940A9 module for 4G networking. How to detect the existence of modules? If we see the following device, the module is installed. 35 / 52 V VT‐TAB185‐SKL LU Warnning: Pleasee check whhether the following coonfiguration is consiistent. If not, May causse automatic wake up affter sleep.(Th his confi figuration is only used for LN940A9) 36 / 52 VT‐TAB185‐SKLU 6.1.1 Driver Install Please refer to \Win10 Driver\4G\LN940Telit Installer_v1.0.1.9.zip=>LN940 Installer User Guide(Win10).pdf 6.1.2 Dial‐Up Insert the SIM card according to the picture below, Pay attention to the direction of the missing angle of SIM card. 37 / 52 VT‐TAB185‐SKLU Open “Network and Sharing Center”, Click “Set up a new connection or network” Select “Connect to the Internet”, then click “Next” 38 / 52 VT‐TAB185‐SKLU Click Dial-up to create a dial-up connection, if the option “Dial-up”does not appear, please enable option “Show connection options that this computer is not set up to use” Input right phone number, User name and Password according to different telecom operators. 39 / 52 VT‐TAB185‐SKLU After completion of the above Settings, Click “Connect”. If nothing else, the dial-up connection was successfully created， now, we can surf the Internet. If dial-up fail, we can check module information by AT command 1. Check module model AT+GMM 2. Check firmware version AT+CGMR 3. Check SIM Card if exist AT+CPIN? If “+CPIN:READY” is received, SIM card has been inserted into the device. 4. Check signal strength AT+CSQ 5. Get Serial Number AT+GSN 40 / 52 VT‐TAB185‐SKLU 6.2 WIFI Module We use Intel 7265 and 8265 for WLAN connecting. How to detect the existence of modules? If we see the following device, the module is present. How to connect the network? Press WIFI button to open available network, then press the network name you want to connect. 41 / 52 VT‐TAB185‐SKLU Press the Connect button and input the network password, then press the Next button to connect the network. Warning: The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. 42 / 52 VT‐TAB185‐SKLU 6.3 Sensor Tool Here we will introduce screen rotation and light sensation. We use LIS3DE as acceleration chip to complete the function of screen rotation and APDS9922 as light sensation chip. They are integrated into sensor tools. The following is the use of software: Tool location: \SW Guide\Sensors\* To run this software, install the runtime library “Microsoft Visual C++ 2015 Redistributable Package.exe”first, it is in the directory“\SW Guide”. If we have installed this library, ignore this step. Copy SensorsWinio_v[xx].exe and Winio64.sys to “C:\RotateScreen”. If we were the first to enter the system, we need to run “SensorsWinio_v[xx].exe” once with administrator privileges. If the program runs normally, there is a tray icon in the lower right corner of the desktop as below： 43 / 52 VT‐TAB185‐SKLU Double click tray icon to open main window as below: Setting the default value for the startup configurationaccording to the red box configuration above. “Auto Rotate”: If checked, screen rotation according to x, y, z axis data. “Auto Brightness”: If checked, adjust screen brightness according to data of light sensor. If unchecked, we can manually adjust the screen brightness by dragging scrollbar. “Auto Boot”: If checked, driver will be installed automatically and the program will run automatically. Finally, reboot PC. The next time we enter the system, Rotate Screen and Light sensor will work properly. 44 / 52 VT‐TAB185‐SKLU 6.4 Fan Control We can adjust fan speed under the BIOS menu. 45 / 52 VT‐TAB185‐SKLU 6.5 Bluetooth There are 2 Bluetooth modules from Intel 8265 and Intel 7265, but only one module can work to support Bluetooth at one time, so please disable onemodule’s Bluetooth in the device manager after installing new OS. 46 / 52 VT‐TAB185‐SKLU Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister. Products or product packages with the sign of “explosive” should not be disposed like household waste but delivered to specialized electrical ＆ electronic waste recycling/disposal center. Proper disposal of this sort of waste helps avoiding harm and adverse effect upon surroundings and people’s health. Please contact local organizations or recycling/disposal center for more recycling/disposal methods of related products. Comply with the following safety tips: Do not use in combustible and explosive environment Keep away from combustible and explosive environment for fear of danger. Keep away from all energized circuits. Operators should not remove enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the 47 / 52 VT‐TAB185‐SKLU device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury. Unauthorized changes to this product or its components are prohibited. In the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help. Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment. 48 / 52 VT‐TAB185‐SKLU Notice Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e‐document, etc. This device is not used asa portable device and it is intended to use asmobile or fixed equipment. FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and 49 / 52 VT‐TAB185‐SKLU on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Caution This device complies with FCC class B Rules. Operation is subject to the Following conditions. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Any modification to the product is not permitted unless authorized by Vantron. It’s not allowed to disassemble the product, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical support department of Vantron or local branches for help. RF Exposure Statement This equipment must be installed and operated in accordance with provide instructions and the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operation in conjunction with any other antenna or transmitter. End‐users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 50 / 52 VT‐TAB185‐SKLU ISED statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure Statement This equipment must be installed and operated in accordance with provide instructions and the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operation in conjunction with any other antenna or transmitter. End‐users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. ce matériel doit être installé et exploité conformément à des instructions et l'antenne utilisée pour cet émetteur doit être installé pour fournir une distance d'au moins 20 cm de toutes les personnes et ne doit pas être installé ou opération conjointement avec toute autre antenne ou transmitter.les utilisateurs finals et les installateurs doivent fournir des instructions d'installation et d'antennes ‐ conditions relatives à l'exposition aux champs rf de conformité. 51 / 52 VT‐TAB185‐SKLU China Office: Chengdu Vantron Technology, Ltd. Address: No.5 Gaopeng Road, Hi‐Tech Zone,Chengdu, Sichuan, P.R.China 610045 Tel: 86‐28‐8512‐3930/3931, 8515‐7572/6320 Email: sales@vantrontech.com.cn US Office: Vantron Technology, Inc. Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566 Tel: +1 916‐202‐7042 Email: sales@vantrontech.com 52 / 52
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2018:10:25 15:12:49+08:00 Modify Date : 2018:11:02 09:19:30-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:11:02 09:19:30-07:00 Format : application/pdf Title : Microsoft Word - User?Manual?1025 Creator : Administrator Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:c1beb880-2f4c-4310-939f-139870b82d48 Instance ID : uuid:410c8225-c4c3-4670-8a48-4411ea71c588 Page Count : 52EXIF Metadata provided by EXIF.tools