Chengdu XGIMI Technology XH05L LED Projector User Manual
Chengdu XGimi Technology Co.,Ltd. LED Projector
User Manual
70.00 mm Please read the manual carefully before using this product. 1 Power on ON/OFF Thank you for your purchase and use of XGIMI 3 Remote Control Pairing 5 Bluetooth Speaker Mode products, for your safety and interests, please Enter Bluetooth speaker mode Air Mouse read the manual carefully before using this When the device is off: product. If you are not in accordance with the Power on, long press the Menu/Shortcut product manual operation or attention, resulting “ (* Long Press) in any personal injury, property or other losses, Speaker Mode XGIMI will not be liable. 10cm Directions & OK About the manual (hereinafter referred to as "manual") Power on The copyright belongs to XGIMI; Return The trademarks and trade names mentioned in the manual belong to their respective owners; if 150.00 mm ”key for 3 seconds, it will enter Bluetooth Click the“ Home Volume+ the manual is inconsistent with the actual product, ”on the machine to turn on the device (* Focal Length+) the actual product shall prevail in kind. Volume- If you have any objection to the contents or terms Please place remote control within 10cm from the (* Focal Length-) of the manual, please submit a written objection device. Press " " and " " at the same time, when the indicator light flashes, then release the buttons, within seven days after the purchase, otherwise you have agreed to understand and accept all the contents of the manual. HD Port/ARC the indicator light flashes continuously, after hearing Power off “Ding” sound, connection is successfull. Earphone jack If pairing failed, exits the pairing mode after 30 seconds In projection mode: Way 1: Click the “ ”,on the remote control to pop up the menu bar, choose the Bluetooth Speaker Mode timeout, follow the steps above to pair again. * Note: Please put two AAA batteries into the remote control. On/Off USB Power Function Key VOL 4 Remote control functions Focus In projection mode, click the“ ” on the machine to turn off the * Move the function switch to the left (VOL): Volume “+” & “-” keys to Move the function switch to the right (Focus): Focus “+” & “-” keys * Please use HD Port2.0 cables for HD Port2.0 interfaces to adjust focus. 7 More Functions Exit Bluetooth Speaker Mode System Upgrade Bluetooth speaker operation Shut down the device: Enter the Bluetooth speaker mode standby status, Long press the“ connect your device with Z6 Polar through Bluetooth ” key for 3 seconds, the device will be shut down Online Upgrade Do not turn the lens towards the human eyes to avoid the Online upgrade through system settings strong light from the lens damage the eyes. Do not use paper, cloth, and other cleaning tools to wipe could void the user's authority to operate the equipment. In Copy the upgraded firmware to the root director with FAT32 format in a USB drive. When the device is off, insert the USB drive into a USB 2.0 interface, long press the“ indicator lamp flickers rapidly. Start rooting at the moment. The indicator lamp will start flickering slowly Play/pause: When playing a network/local song, click the “ Enter projection mode ”key on the device or click the “OK” key after the rooting is finished. then device will enter projection mode. on the remote control Way 1: Press the“ ”on the device for 7 seconds until the ”key on Selection of songs: Double click the “ the remote control ”key on the device to select next song, or click the “<”or “>” on the remote control for selection Volume adjustment: Click/long press the volume “+” or “-” keys on the device or those on the remote System Function The manual provides instruction of basic functions. For detailed operation and other functions, please check the electronic instructions on the main page: https://forum.xgimi.com/download-firmware.html. Do not use chemicals, cleaning agents or clean water to clean the device, as well as to avoid rain, moisture and mineral liquid corrosion circuiting board. Please ensure that the device is being used in a dry and ”, key on the device to enter projection mode can be easily controlled by mobile phone. with the limits for a Class B digital device, pursuant to Part 15 PL CY PT DK LV RO Enabling operating environment could be 0~40℃. DE LT SI residential installation. This equipment generates, uses and EE LU SK can radiate radio frequency energy and, if not installed and IE HU FI used in accordance with the instructions, may cause harmful EL MT SE interference to radio communications. However, there is no ES NL UK guarantee that interference will not occur in a particular FR Do not put the device in any heating equipment (such as drying machine, microwave oven, and etc.) Do not squeeze the device or place heavy objects on the installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following Do not attempt to disassemble device. If you have any measures: questions, please contact the after-sales service of XGIMI. -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. after-sales service or factory repair. -- Consult the dealer or an experienced radio/TV technician If the device has not been using for a long time, please cut for help. off the power supply. * Note: Due to the continuous updating of the system function, please refer to the actual functions. AT IT CZ of the FCC Rules. These limits are designed to provide the resource from mobile phone to device to view photos HR BG reasonable protection against harmful interference in a Mobile phone resource: send or videos. BE Do not store the device in hot or cold environment, high (low) cannot work normally should promptly consult the Mobile phone remote: device Way 2: Press the “ placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply temperature will shorten the life span of electronic devices. Do not maintain any products. If the device or any parts store on your devices. Note:For 5150-5250MHz band,it is restricted to indoor use. form. For a Class B digital device or peripheral, the instructions resulting in damage to the internal circuit board. Download “XGIMI Assistant” application from App information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that furnished the user shall include the following or similar statement, Do not throw, knock, or violent shaking the device, 6 XGIMI Assistance cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the place where children cannot touch. device to avoid damage to the device. control to adjust volume not expressly approved by the party responsible for compliance Please put the device and its parts and accessories in the ventilated environment. service@xgimi.com (1) this device may not cause harmful interference, and (2) manual or instruction manual for an intentional or unintentional blowing to remove dust on the lens’ surface. www.xgimi.com this device must accept any interference received, including radiator shall caution the user that changes or modifications select the U disk upgrade. +86-28-67599891 interference that may cause undesired operation. The user Do not block the air inlet and outlet of the device to avoid Compulsive upgrading Chengdu XGimi Technology Co., Ltd. Building A4, Tianfu Software Park, High-tech zone, Chengdu, China This device complies with Part 15 of the FCC Rules. Operation damage to the internal electronic devices. the lens directly to avoid damage to the lens; use clean air Speaker Mode is subject to the following two conditions: Local Upgrade FAT32 format enter the Bluetooth FCC Warning 1、Copy the firmware to the packing list of U disk in 2、Insert the U disk into the USB2.0 interface and Play control Usage Notice How to use the equipment correctly: ” key for 3 seconds, it will Menu/shortcut key functions Shortly press the“ ”to enable the menu key functions; long press the“ ”to enable the shortcut key functions device adjust volume; XGIMI reserves the right to interpret and modify the manual. Way 2: Long press the “ Focusing functions The focusing function is enabled after moving the function switch, at the bottom of the remote control, to the right (Focus); Pressing “volume +/- ”to adjust the volume when function key is at the left. FCC ID:2AFENXH05L CAUTION possibly hazardous optical radiation emitted from this product. The max RF output power of this product for CE certication is below: Mode Frequency Range Max RF Output Power(dBm) BLE 2402-2480MHz 3.50 BT3.0 WLAN 2402-2480MHz 5.22 2412-2472MHz 19.32 5150-5250MHz 20.79 5725-5850MHz 13.73 Z6 Polar
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 0000:01:01 00:00:00 Creation Date--Text : Modify Date : 2018:06:05 22:16:07-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Administrator Title : 2018.05.18 Z6Polar 海外版 说明书认证使用.cdr Creator Tool : CorelDRAW Metadata Date : 2018:06:05 22:16:07-07:00 Producer : Corel PDF Engine Version 14.0.0.653 Document ID : uuid:c28b6e3b-7b99-4e6a-9281-f642aca2a09e Instance ID : uuid:6649aaa6-7c27-44a4-b5f5-ed4fc55823fb Page Count : 1EXIF Metadata provided by EXIF.tools