Chi Mei Communication Systems 0208WAG01 PCS Handset with GPRS User Manual wolfgang
Chi Mei Communication Systems, Inc. PCS Handset with GPRS wolfgang
Contents
- 1. Users Manual Part I
- 2. Users Manual Part II
- 3. Rev Manual Part I
- 4. Rev Manual Part II
Users Manual Part II
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 279669 |
| Application ID | yvjCZyzx+wexeC4/F1jRlw== |
| Document Description | Users Manual Part II |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 279.65kB (3495579 bits) |
| Date Submitted | 2002-10-29 00:00:00 |
| Date Available | 2002-10-25 00:00:00 |
| Creation Date | 2002-10-29 12:31:23 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2002-10-29 12:31:44 |
| Document Title | wolfgang.book |
| Document Creator | FrameMaker 6.0 |
| Document Author: | kennyhu |
The Main Menu 33 The Main Menu Overview The main menu of your phone is accessed by pressing Menu in standby mode. Overview To navigate in the Main Menu Press or to scroll the menu. Press or Select to view the contents of the menu or select an option. Press or Exit to return to previous menu or abort selection. You can also navigate using the quick access keys: 1. In standby mode, press Menu. 2. Press the quick access keys. For example, to go to Dialed Calls, press See Appendix for the quick access keys. 34 The Main Menu Message The options in the Message menu allow you to write, send and receive messages and setup message settings. Message Note Before you can use Message functions, make sure that related message settings has been configured properly. (Depending on your operator, the settings may have already been programmed on the SIM card). Refer to "Message settings"on page 39 for details. Writing and sending new messages You can write long text messages that contain up to 160 characters (including spaces and symbols). Besides, your phone supports MMS (Multi-Media Messaging) standard which allows you to insert picture, sound, animation and melodies in a message. Note The recipient’s phone must also support MMS functionality to receive and view your MMS messages. To write a new message: 1. In standby mode, press Menu, Select. 2. Scroll to Write message and press Select. 3. Enter the content of the message. When finished, press Options to access the options below: • Send: Send the message immediately. If this option is selected, you will be prompted to enter the number of the recipients. You can also pick up recipients from your Phone Book by pressing Names. The message can be sent to one recipient and copy to up to 9 recipients. • Save: Save the message as a draft in Outbox. • Insert template: Insert messages templates stored in the phone. You can also customize your own templates. Please refer to "Customizing templates"on page 38 for how to customize message templates. • Insert number: Insert a phone number from your Phone Book. • Insert name: Insert a name from your Phone Book. • Insert picture: Insert a picture into the message. You can also draw your own picture. For details, refer to "My Picture"on page 67. • Insert animation: Insert an animation into the message. 35 The Main Menu • Insert sound: Insert sound effect into the message. • Insert melody: Insert a ring tone melody into the message. 4. If the message is sent, copy will be stored in your Outbox. You can also send a message from message templates. Please refer to "Sending a message from templates"on page 39 for details. Message Viewing sent messages The draft and sent messages are automatically stored in the Outbox. To open the Outbox and check these messages: 1. In standby mode, press Menu, Select. 2. Scroll to Outbox and press Select. A list of draft and sent messages will appear on the screen. The icon that appears in front of a message indicates the status of the message. Icon Status of message Unsent message Sent message 3. Scroll to a message and press Select. The message will be opened. 4. Press Options and you can also choose to perform the following operations to selected message. • Erase: Erase current message. • Send: Send this message to other recipients. • Edit: Edit current message. You can send the message after you finish editing. • Use number: Capture the numbers in the message. The numbers captured will appear on the screen. Scroll to a number and press Select. You can call the number directly or save it in Phone Book. Receiving messages When a new message is received, New message and the icon will appear on the screen. Press Detail. The list of received messages will appear on the screen. Viewing received messages The messages you received are stored in the Inbox. To open Inbox and view received messages: 36 The Main Menu 1. In standby mode, press Menu, Select. 2. Press Select. A list of received messages will appear on the screen. The icon that appears in front of a message indicates the status of the message. Icon Status of message Message Unread message Read message Unread e-mail message Read e-mail message Unread Fax message Read Fax message Unread paging message Read paging message Unread message in any other format Read message in any other format 3. Scroll to a message you want to read and press Select. The contents of the message will be opened to the screen. 4. You can press Options to perform the following operations: • Erase: Erase current message. • Reply: Reply to current message. • Send: Send this message to other recipients. • Edit: Edit current message. You can send the message after you finish editing. • Use number: Capture the numbers in the message. The numbers captured will appear on the screen. Scroll to a number and press Select. You can call the number directly or save it in Phone Book. • Callback: Make a call to the sender of current message. • Open Chatroom: Open a new chatroom session with the sender of current message. You can also add other members to the chatroom. Chatroom The Chatroom function allows you to chat on-line with multiple members via text messages. In a chat session, you can invite up to 37 The Main Menu 4 members to your chatroom and talk to each other simultaneously. If someone else invites you to join his/her chatroom, you will be notified by a chat message. Press OK to join the chat. Message Opening a new chat session 1. In standby mode, press Menu, Select. 2. Scroll to Chatroom and press Select. 3. Enter the number of chat member, or pick a member from your Phone Book by pressing Names. Repeat this step if you want to invite multiple members to your chatroom. 4. Press OK. Enter your nickname and press OK. In a chat session, chat members’ message will appear on the screen following their nicknames. You can enter your message and send it by pressing Options, Select. Options during a chat session Press Options during a chat session. Scroll to an option and press Select to select it. • Send: Send the message you entered. • Insert template: Insert message templates into your chat message. You can also customize your own message templates. See "Customizing message template"on page 38 for details. • Insert Smiley: Insert smiley symbols into your chat message. • Nickname: change your nickname during a chat session. Enter your new nickname and press OK. • Chat numbers: Invite new members to your chatroom. Enter the number of chat member, or pick a member from your Phone Book by pressing Names. • View History: View the history of current chat session. Ending a chat session How to end the chat session? Customizing templates Templates are frequently used phrases pre-stored in phone memory. When writing a message, you can insert them into your message directly. You can also customize your own templates. Customizing message template 1. In standby mode, press Menu, Select. 38 The Main Menu 2. Scroll to Template and press Select. 3. Scroll to an empty template and press Select. 4. Scroll to Edit template and press Select. 5. Write the contents of the template. When done, press Save. Message Erasing customized message template 1. In standby mode, press Menu, Select. 2. Scroll to Template and press Select. 3. Scroll to a customized template and press Select. 4. Scroll to Erase template and press Select. Sending a message from templates 1. In standby mode, press Menu, Select. 2. Scroll to Template and press Select. 3. Scroll to a template you want to send and press Select. 4. Scroll to Send and press Select. 5. Enter the recipients number or pick one from Phone Book by pressing Names. 6. Press Send and the message will be sent. Erasing all messages This function allows you to erase all messages in Inbox and Outbox. 1. In standby mode, press Menu, Select. 2. Scroll to Erase all and press Select. 3. Press Delete. Message settings Configuring message setting profiles The message settings can be configured in different profiles. Usually you use the profile of your operator on the SIM card. If your SIM card does not contain such profile, you need to set up a profile in your phone. Using the profile on your SIM card 1. In standby mode, press Menu, Select. 2. Scroll to Profile and press Select. 3. Press OK. Configuring a new profile 39 The Main Menu Message 1. In standby mode, press Menu, Select. 2. Scroll to Profile and press Select. 3. Scroll to an empty profile and press OK. 4. Scroll to Customize and press Select. 5. Complete following settings: • Name: Enter a name for this profile. • Center number: Enter the message center number. This number is supplied by your operator. • Send As: Defines the type of message. Your system operator may be able to convert your message to the type you select here. Press or to select a type. • Valid Period: The valid period determines the duration of time the message is stored in the message center if it can not be successfully received by the recipient. Press or to select a duration. 6. Press Save. Using a configured profile 1. In standby mode, press Menu, Select. 2. Scroll to Profile and press Select. 3. Scroll to the profile you configured and press OK. 4. Scroll to Activate and press Select. Configuring voice mailbox number Depending on your operator, the voice mailbox number may have already been programmed on the SIM card and your phone can detect it automatically. Otherwise, you have to enter it following the steps below: 1. In standby mode, press Menu, Select. 2. Scroll to Voice mail and press Select. 3. Enter the voice mailbox number and press Save. Message options Message status report If this function is turned on, your operator will send you a message delivery report, letting you know if your message is sent successfully. To turn on/off the message status report: 1. In standby mode, press Menu, Select. 2. Scroll to Option and press Select. 3. Press Select. 40 The Main Menu 4. Press On (or Off). 5. Press Save. Reply path Send by GSM or GPRS Depending on your selection here, your message can be sent either by GSM or by GPRS. 1. In standby mode, press Menu, Select. 2. Scroll to Option and press Select. 3. Press Select. 4. Scroll to Send by and press Select. 5. Press On (or Off). 6. Scroll one of the following items and press OK. • GSM first: Send messages via GSM network first. If GSM network is not available, send messages via GPRS. • GPRS first: Send messages via GPRS first. If GSM network is not available, send messages via GSM network. • GSM only: Send messages via GSM network only. • GPRS only: Send messages via GPRS only. Checking message memory status The messages you received and the copy of your sent messages are stored in the memory in your phone and on the SIM card. You can check the status of the memory here. 1. In standby mode, press Menu, Select. 2. Scroll to Option and press Select. 41 Message The Reply Path function allows the recipient of your message to send you a reply message via your message center. To turn on/off the reply path: 1. In standby mode, press Menu, Select. 2. Scroll to Option and press Select. 3. Press Select. 4. Scroll to Reply Path. 5. Press On (or Off). The Main Menu 3. Scroll to Memory status and press Select. Used SIM memory Message Available SIM card memory Available phone memory Used phone memory Cell broadcast options Cell broadcast refers to the text messages that your operator sends to all subscribers. For example, on-line traffic report or notification from the system operator. For details about cell broadcast services and contents, please contact your operator. Turning on or off cell broadcast You can choose to turn on or off the cell broadcast. 1. In standby mode, press Menu, Select. 2. Scroll to Cell broadcast and press Select. 3. Press On (or Off). Setting up cell broadcast topics You can edit cell broadcast topics in the topics list. 1. In standby mode, press Menu, Select. 2. Scroll to Cell broadcast and press Select. 3. Scroll to Topic and press Select. 4. Scroll to the topic you want to edit. 5. Edit the topic. When done, press Save. Sending message service commands With this function you can edit and send certain service commands to your operator to perform certain operations. For details on service commands and how to use them, please consult your operator. 1. In standby mode, press Menu, Select. 2. Scroll to Service command and press Select. 3. Enter the command and press Send. 42 The Main Menu Call Meter The options in the Call Meter menu allow you to easily manage your phone call records. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Press Select. The list of missed calls will appear on the screen. Each call record is represented by the name of the caller. If the caller can not be found in your Phone Book, or the number is unknown, No Number will appear. 4. You can press Options to access the following options: • View: View date and time of the missed call. • Erase: Erase this call record. Press OK to erase it. Viewing received call records 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Received calls and press Select. The list of received calls will appear on the screen. Each call record is represented by the name of the caller. If the caller can not be found in your Phone Book, or the number is unknown, No Number will appear. 4. You can press Options to access the following options: • View: View date and time of the missed call. • Erase: Erase this call record. Press OK to erase it. Viewing dialed call records 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Dialed calls and press Select. The list of dialed calls will appear on the screen. Each call record is represented by the name of the recipient. If the recipient can not be found in your Phone Book, only the number you dialed will appear. 4. You can press Options to access the following options: • View: View date and time of the missed call. • Erase: Erase this call record. Press OK to erase it. • Call: Make a call to the recipient immediately. • Save: Save this record to Phone Book. Erasing all call records 1. In standby mode, press Menu. 43 Call Meter Viewing missed call records The Main Menu 2. Scroll to Call meter and press Select. 3. Scroll to Erase all and press Select. 4. Press OK again to confirm deletion. Viewing call time information Call Meter You can check the duration of your phone calls with this function. The information includes the duration of the last call, all calls, received calls and dialed calls. To view call time information: 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Call Time and press Select. 4. Scroll to the type of information you want to view and press Select. Clearing call timer The call time can be cleared by resetting the call timer. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Call Time and press Select. 4. Scroll Clear timer and press Select. Viewing call cost information If your operator supports, you can check the cost of your last call and all calls with this function. Note that the call cost shown here may not exactly reflect the amount of your phone bill, since there may be different discount rates offered by your system operator in different time periods. Note You need PIN2 code to access certain call cost functions. Viewing call cost 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Call Cost and press Select. 4. Scroll to Last call or All calls and press Select. Clearing call cost 1. In standby mode, press Menu. 44 The Main Menu 2. Scroll to Call meter and press Select. 3. Scroll to Call Cost and press Select. 4. Scroll to Clear cost and press Select. 5. Enter your PIN2 code and press OK. Call cost credit is used to limit the cost of your call. If your call cost exceeds such credit, you will not be able to make phone calls. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Call Cost and press Select. 4. Scroll to Credit remaining and press Select. Configuring call cost settings Note You will be prompted to enter your PIN2 code when modifying call cost settings. Before you can obtain call cost information, you need to configure call cost settings following the steps below: 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Call Cost and press Select. 4. Scroll to Setting and press Select. 5. Scroll to an item and press Select to configure. • Cost limit: Enter a cost limit. This limit is also your call cost credit. • Currency: Enter the currency that will be used to calculate your call cost. • Price unit: Enter the unit of price that will be used to calculate your call cost. 6. When done, press OK. Viewing GPRS related information GPRS data GPRS data counter The GPRS data counter provides information about the size of data you sent/received via GPRS. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 45 Call Meter Viewing remaining call cost credit The Main Menu Call Meter 3. Scroll to GPRS data counter and press Select. 4. Scroll to an item below and press Select to view corresponding information: Last sent: Display the total size of data you last sent. Last received: Display the total size of data you last received. Total sent: Display the total size of data you sent. Total received: Display the total size of data you received. Clearing GPRS data counter 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to GPRS data counter and press Select. 4. Scroll to Clear counter and press Select. GPRS connection time GPRS timer The GPRS time counter provides information about the duration you spent on GPRS connection. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to GPRS connection time and press Select. 4. Scroll to an item below and press Select to view corresponding information: • Last connection: Display the duration of your last GPRS connection. • Total connection: Display accumulated duration of all GPRS connection. Clearing GPRS timer 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to GPRS connection time and press Select. 4. Scroll to Clear timer and press Select. Incall count The Incall count function automatically counts the time or cost and displays such information on the screen when you are on a call. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Incall count and press Select. 46 The Main Menu 4. Scroll to Call time (display call time during a call) or Call cost (display call time during a call) and press Select. Session information 47 Call Meter If this function is activated, the time and cost information of the phone call will appear on the screen after you end a call. 1. In standby mode, press Menu. 2. Scroll to Call meter and press Select. 3. Scroll to Session information and press On (to activate) or Off (to deactivate). The Main Menu Call Feature The options in the Call Feature menu allows you to access advanced call features. Call Feature Note Some of the call features described in this section are operator dependent. Please consult your operator for availability. Call divert If for any reason you can not answer a call, you can activate the call divert function to direct incoming calls to a specific phone number. If Call divert function is activated, the icon will appear on the screen. Diverting voice calls To activate call divert function for vioce calls: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Press Select. 4. Press Select. 5. Scroll to a a desired condition: • When Busy: divert all voice calls when you are on a call. • No Reply: divert all voice calls when they are not answered. • Not Reachable: divert all voice calls when you are outside your operator’s network service area. • Not Available: divert all voice calls whenever you are not available for answering a call. • All Calls: divert all incoming voice calls. 6. Press Select. 7. Enter the designated number and press OK, or press Names to pick up the number from your Phone Book. 8. Press OK. Deactivating voice call divert function To cancel specific call divert function, scroll to Off and press Select in step 6 above. Inquiring status To inquire the service status of specific call divert function, scroll to Status and press Select in step 6 above. 48 The Main Menu Diverting data or fax calls Deactivating data or fax call divert function Scroll to Off and press Select in step 5 above. Inquiring status Scroll to Status and press Select in step 5 above. Deactivating all call divert functions You can deactivate all call divert functions (including voice, Fax and data calls) at once. 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Press Select. 4. Scroll to Cancel all and press Select. Call waiting If activated, the Call waiting function allows you to answer the second incoming call when you are on a call. See "Answering a new incoming call"on page 18 for details. 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Call waiting and press Select. 4. Scroll to On and press Select. Deactivating call waiting To cancel call waiting, scroll to Off and press Select in step 4 above. Inquiring status 49 Call Feature To activate call divert function for vioce calls: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Press Select. 4. Scroll to Fax calls (to divert Fax calls) or Data calls (to divert data calls) and press Select. 5. Press Select. 6. Enter the designated number and press OK, or press Names to pick up the number from your Phone Book. 7. Press OK. The Main Menu To inquire the service status of call waiting function, scroll to Status and press Select in step 4 above. Call barring Call Feature With Call barring function, you can bar (restrict) incoming and outgoing calls under certain conditions. Note You need network code to activate/deactivate call barring function. Such code is available from your operator. Barring outgoing calls To bar outgoing calls: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Call barring and press Select. 4. Press Select. 5. Scroll to a desired barring condition: • Int’l calls: bar all outgoing international calls. • Int’l calls except home: bar all outgoing international calls except the calls made to your home country. • All calls: bar all outgoing calls. 6. Press Select. 7. Press Select. 8. Enter your network code and press OK. The phone will contact the system and activate selected call barring function. Cancel barring of outgoing calls To deactivate barring of outgoing calls, scroll to Off and press Select in step 7 above. Inquiring status To inquire the service status of call barring function, scroll to Status and press Select in step 7 above. Barring incoming calls To bar incoming calls: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Call barring and press Select. 4. Scroll to Incoming calls and press Select. 50 The Main Menu Cancel barring of incoming calls To deactivate barring of outgoing calls, scroll to Off and press Select in step 7 above. Inquiring status To inquire the service status of call barring function, scroll to Status and press Select in step 7 above. Cancel all call barring functions You can deactivate all call barring functions (including barring of incoming and outgoing calls) here. 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Call barring and press Select. 4. Scroll to Cancel all and press Select. 5. Enter your network code and press OK. Changing network code 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Call barring and press Select. 4. Scroll to Change password and press Select. 5. Enter your network code and press OK. 6. Enter new network code and press OK. 7. Enter new network code again to confirm. Press OK. Showing/hiding your number Depending on the your operator, you may choose to show or hide your number when making a call. If your number is hidden, it will not be shown to the person who receives your call. To show/hide your number: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Show number and press Select. 51 Call Feature 5. Scroll to a desired barring condition: • When roaming: bar all incoming calls when roaming. • All calls: bar all incoming calls. 6. Press Select. 7. Press Select. 8. Enter your network code and press OK. The phone will contact the system and activate selected call barring function. The Main Menu Call Feature 4. Scroll to one of the following: • Preset: use your operator setting. Your operator decides whether to show your number or not. • On: show your number. • Off: hide your number. 5. Press OK. Selecting a phone line to use Depending on your subscription to the operator, you may use two different phone lines (numbers) to receive and make voice calls. You can select a phone line to use here. To select a phone line: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Phone lines and press Select. 4. Scroll to Line 1 (to use phone line 1) or Line 2 (to use phone line 2). 5. Press OK. If phone line 2 is selected, the icon will appear on the screen. Anykey answer The anykey answer function allows you to answer a call by pressing any key (except End and key). You can activate/deactivate such function here. 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Anykey answer and press On (to activate) or Off (to deactivate). Auto redial If this function is activated, your phone redials the number automatically when your attempt to make a call fails. 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Auto redial and press On (to activate) or Off (to deactivate). Speed dialing You can activate/deactivate speed dialing function here. 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 52 The Main Menu 3. Scroll to Speed dialing and press On (to activate) or Off (to deactivate). Receiving a fax or data call Talk and Fax To turn on/off the talk and fax function: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Talk and Fax and press On (to activate) or Off (to deactivate). 53 Call Feature Depending on your subscription to the operator, your may be able to receive fax and data calls. However, if you do not have separate data and voice lines, you need to setup the type of phone call to answer. To receive a fax or data call: 1. Before receiving the call, connect the phone to a computer using one of the methods below: • Place the phone near the computer and align the infrared port of the phone to the one on the computer. • Connect the phone to the computer using the data cable (available separately). 2. In standby mode, press Menu. 3. Scroll to Call feature and press Select. 4. Scroll to Next call and press Select. 5. Depending on the type of call to receive, scroll to Fax or Data and press OK. 6. Open the software program on the computer and answer the call. The icon (the next call is set as Fax call) or (the next call is set as data call) will appear on the screen. To receive voice calls after the data or fax call: 1. In standby mode, press Menu. 2. Scroll to Call feature and press Select. 3. Scroll to Next call and press Select. 4. Scroll to Voice and press OK. The Main Menu Sound The options in the Sound menu allows you to setup the sound settings of your phone. Sound Sound profiles Sound profile is a combination of sound settings. Your phone provides 6 pre-configured sound profiles and you can select one that fits your circumstances to use. For example, in a meeting, you can select to use the Meeting profile. You can also configure these profiles according to your preferences. Note about sound profiles The Handsfree and Headset profiles won’t work unless a handsfree kit or headset in plugged into your phone. Selecting a sound profile To select a sound profile to use: 1. In standby mode, press Menu. 2. Scroll to Sound and press Select. 3. Press Select. 4. Scroll to desired sound profile and press OK. 5. Press Select. Or: 1. Press the power key in standby mode. The sound profiles will appear on the screen. 2. Scroll to desired profile and press Select. The name of selected sound profile will appear on the screen in standby mode. Customizing a sound profile To customize a sound profile: 1. In standby mode, press Menu. 2. Scroll to Sound and press Select. 3. Press Select. 4. Scroll to the sound profile you want to customize and press OK. 5. Scroll to Customize and press Select. 6. The following options are available. Scroll to each option and press Select to customize. 54 The Main Menu Renaming a sound profile 1. In standby mode, press Menu. 2. Scroll to Sound and press Select. 3. Press Select. 4. Scroll to the sound profile you want to rename and press OK. 5. Enter the new name and press OK. Note The Handsfree and Headset profiles can’t be renamed. Composing your ringing tones With the Tone editor function, you can create your unique ringing tone or compose a ringing tone according to your favorite songs. You can create up to 5 ringing tones. 1. In standby mode, press Menu. 2. Scroll to Sound and press Select. 3. Scroll to Tone editor and press Select. 4. The ringing tone editor screen appears. Press an appropriate key to insert symbols. Please see the table below for the mapping of keys and symbols. Press this key... To... 55 Sound • Ringing volume: Scroll to a desired ringing volume and press OK. 5 volume levels are available. • Ringing tone: Scroll to a desired ringing tone and press OK. There are 30 built-in ringing tomes and 5 ringing tones you can compose by yourself (see "Composing your ringing tones"on page 55 for how to compose a ringing tone). • Incoming call alert: Here you can select the ringing mode of incoming calls. Available modes are: Off (no ringing tone), Continue Ringing, Ring Once, Ascending, Group (the phone rings only when calls from selected caller groups are received). If Group is selected, you will be prompted to select a caller group. • Vibrating: Press On to activate vibration, or Off to deactivate. • Message Alert Tone: Select the sound that is played upon receiving a message. There are 4 tones available for selection. If Off is selected, the message alert tone will be turned off. • Keypad tones: Press On to activate keypad tone, or Off to deactivate. • Warning tones: Warning tone is played when phone battery is low, or there is an error in operation. Press On to warning tone, or Off to deactivate. The Main Menu Insert a C sharp note. Insert a D sharp note. Insert an E sharp note. Sound Insert an F sharp note. Insert a G sharp note. Insert an A sharp note. Insert a B sharp note. Increase the length of selected note/rest. Move the note one octave up. Decrease the length of selected note/rest. Move the note one octave down. Insert a rest. Move selected symbol up on the staff. Move selected symbol down on the staff. Select previous symbol. Select next symbol. When selecting a note, inserting a note, moving selected note up/ down or changing the length of the note, corresponding tone is played. Note You can insert up to 126 symbols in one ringing tone. 56 The Main Menu For example, to get the melody on the left: to get a F sharp note. Press to get a G sharp note. Press three times to increase length. Press to get a D sharp note. Press four times to decrease length. Press to insert a rest. 2nd symbol 3rd symbol 4th symbol Sound 1st symbol Press 5. Press Options to select from the following: Play: Press Select to play the ringing tone you just created. Save: Press Select to save the ringing tone you just created. Tempo: Press Select to change the speed of tempo. Scroll to a tempo and press OK. The larger the number, the slower the tempo. Clear Screen: Press Select to delete all symbols. Rename: Press Select to change the name of current ringing tone. Enter the new name and press OK. Minute reminder If this function is activated, your phone will generate a beep tone every minute when you are on a call to remind you of the call time. 1. In standby mode, press Menu. 2. Scroll to Sound and press Select. 3. Scroll to Reminder and press On (to activate) or Off (to deactivate). 57 The Main Menu Phone setup The options in the Phone Setup menu allows you to setup the phone according to your preferences. Phone setup Changing menu language 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Press Select. 4. Scroll to preferred language and press Select. Adjusting backlight Adjusting backlight duration This option allows you to change the duration of backlight in standby mode. Note that longer backlight consumes more battery power. You can also choose to turn it off. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Backlight and press Select. 4. Press Select. 5. Scroll to desired duration and press OK. If Off is selected, the backlight will be turned off. Changing backlight color 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Backlight and press Select. 4. Scroll to Color and press Select. 5. Scroll to desired color and press OK. Adjusting screen contrast 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Adjust contrast and press Select. 4. Press or to select an appropriate contrast level and press OK. Clock Showing/hiding clock on the screen 58 The Main Menu 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Clock and press Select. 4. Press On (to show clock) or Off (to hide clock). Before you can use the clock of your phone, you need to setup current time and date first. Selecting time zone 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Clock and press Select. 4. Scroll to Local time zone and press Select. 5. Press or to scroll to your time zone and press Save. Setting up current time and date 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Clock and press Select. 4. Scroll to Time and date and press Select. 5. Enter current date using alphanumeric keys. When done, press 6. Enter current time using the alphanumeric keys and press Save. Setting up date format Here you can select a preferred date format. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Clock and press Select. 4. Scroll to Time and date and press Select. 5. Scroll to Date Format and press Select. 6. Scroll to desired format and press OK. World clock The world clock function allows you to view current time of major cities in the world. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Clock and press Select. 4. Scroll to World Clock and press Select. 59 Phone setup Setting up current time and date The Main Menu 5. Press or to scroll to a desired city, and the current time will appear on the screen. You can also press Detail to view detailed time information of selected city. Phone setup Auto power off If this function is activated, your phone can be switched off automatically at the specified time. Activating Auto power off 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Auto power off and press Select. 4. Scroll to On and press OK. 5. Enter the power off time using alphanumeric keys. When done, press 6. Press or to select desired repeat type. 7. Press Save. The icon will appear on the screen. Deactivating Auto power off To deactivate Auto power off function, scroll to Off and press OK in step 4 above. Idle screen display Screen saver Screen saver appears on phone screen when there is no user operation for a period of time in standby mode. You can select a preferred animation to use and setup the duration of time (timeout period) before the animation is displayed. Activating screen saver 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Display and press Select. 4. Scroll to Screen saver and press Select. 5. Scroll to an animation and the animation will appear in a few seconds. Press OK to select current animation. Otherwise, press Back to select another animation. 60 The Main Menu Deactivating Screen saver To deactivate Screen saver, scroll to Off and press OK in step 5 above. Phone setup Setting up timeout period 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Display and press Select. 4. Scroll to Screen saver and press Select. 5. Scroll to Timeout and press Select. 6. Scroll to a desired period and press OK. Standby logo With this function, you can use a favorite picture (or pictures you draw with My Picture function, see "My Picture"on page 67 for details) as the logo that is displayed on the screen in standby mode. The name of your operator on the screen will be replaced by the standby logo. Showing/hiding standby logo 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Display and press Select. 4. Scroll to Standby logo and press Select. 5. Press On (to show logo) or Off (to hide logo). Selecting standby logo 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Display and press Select. 4. Scroll to Standby logo and press Select. 5. Scroll to Update logo and press Select. 6. Scroll to a desired category and press Select. 7. Scroll to a desired picture and press Select. Key lock Activating Key lock 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Key lock and press Select. 61 The Main Menu 4. Scroll to Auto (the phone activates key lock automatically if there is no key operation in 20 seconds) or Lock now (activate Key lock immediately) and press Select. If Key lock is activated, the icon will appear on the screen. Phone setup In standby mode, you can also activate key lock by pressing Menu, key. To unlock, press Unlock, key. Deactivating Key lock To deactivate Key lock function, scroll to Off and press OK in step 4 above. Selecting default input mode Here you can select a default input mode to use. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Input mode and press Select. 4. Scroll to the input mode you want to set as default, and press OK. Restoring factory settings With this function you can reset most of the menu settings to their original factory values at once. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Restore factory settings and press Select. 4. Enter your phone code and press OK. 62 The Main Menu Phone security settings The security settings deal with security codes of your phone. With these codes, you can protect your phone from being accidentally used by another person. Phone setup About security codes Network Code: The code for accessing your operator's network. You can get such code from your operator. Phone code: The code for preventing unauthorized use of your phone. If Phone code is enabled, you have to enter it each time you turn on your phone. The default Phone code of your phone is 12345678. SIM lock code: The SIM lock function prevents your phone from being used with unknown SIM cards and vise versa. If the SIM lock is activated, unknown SIM cards can not be used with your phone. The default SIM lock code of your phone is 12345678. PIN code: A 4~8 digit code that is supplied by your operator upon subscription. PIN2 code: The second set of PIN code that is supplied by your operator to control over certain services (such as call cost calculation). This code is supplied by your operator. PUK code: The code for unblocking your SIM card. You can get such code from your operator Activating/deactivating security codes Activating/deactivating PIN code 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Press Select. 5. Press On (to activate) or Off (to deactivate). 6. Enter your PIN code and press OK. Activating/deactivating phone code 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Press Select. 5. Scroll to Phone code and press On (to activate) or Off (to deactivate). 6. Enter your phone code (the default phone code is 12345678) and press OK. 63 The Main Menu Activating/deactivating SIM lock Phone setup 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Press Select. 5. Scroll to SIM lock and press On (to activate) or Off (to deactivate). 6. Enter your SIM lock code (the default SIM lock code is 12345678) and press OK. Changing security codes Note Before changing these codes, you must activate them first. Changing PIN code 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Scroll to Change code and press Select. 5. Press Select. 6. Enter the old PIN code and press OK. 7. Enter the new PIN code and press OK. 8. Enter the new PIN code again and press OK. Changing PIN2 code 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Scroll to Change code and press Select. 5. Scroll to PIN2 and press Select. 6. Enter the old PIN2 code and press OK. 7. Enter the new PIN2 code and press OK. 8. Enter the new PIN2 code again and press OK. Changing phone code 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Scroll to Change code and press Select. 5. Scroll to Phone code and press Select. 6. Enter the old Phone code and press OK. 64 The Main Menu 7. Enter the new Phone code and press OK. 8. Enter the new Phone code again and press OK. Changing SIM lock code Phone setup 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Scroll to Change code and press Select. 5. Scroll to SIM lock and press Select. 6. Enter the old SIM lock code and press OK. 7. Enter the new SIM lock code and press OK. 8. Enter the new SIM lock code again and press OK. Closed user group Closed user group is an operator dependent function. If you have subscribed this feature, you can specify the group of people who can call you and receive your call. To activate closed user group: 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Security and press Select. 4. Scroll to Closed user group and press Select. 5. Scroll to one of the following and press OK. • Preset: Activate the closed user group function and use preset closed user group. • On: Activate the closed user group function and specify a closed user group. You will be prompted to enter the number of the closed user group. The number is available from your system operator. • Off: deactivate the closed user group function. Network settings Network selection Your phone provides 2 network selection modes: Automatic and Manual. Your phone automatically selects the network of your operator in Automatic mode. In Manual mode, your phone scans the networks available and allows you to select a network to use. For example, if you are roaming under other networks, you can manually select the network that has roaming agreement with your home network. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 65 The Main Menu 3. Scroll to Network and press Select. 4. Scroll to Automatic or Manual and press Select. If Manual is selected, the phone scans the network and a network operator list appears. Scroll to desired operator and press Select. Phone setup Band selection Normally, your phone selects an appropriate band of the network automatically. However, you can also select it manually when you are using your phone in different countries. 1. In standby mode, press Menu. 2. Scroll to Phone setup and press Select. 3. Scroll to Network and press Select. 4. Scroll to Band and press Select. 5. Scroll to Auto, 900/1800 MHz or 1900MHz and press OK. 66 The Main Menu Extras My Picture Creating My Picture 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Press Select. 4. Scroll to an empty picture and press Select. 5. Press Select. 6. Press Options. 7. Scroll to Picture size and press Select. 8. Press or to determine the width of the picture (in pixels), and press . 9. Press or to determine the height of the picture. Press Save. 10. Now you can start drawing your picture: • Press key to switch among line mode (to draw lines), dot mode (to make dots) or eraser mode (to erase lines and dots). • Press key to change the thickness of line (when drawing lines) or size of dot (when making dots). • Press key to change the step of pen. • You can also change drawing modes by pressing Options, scrolling to Pen mode, Pen size and Pen step and pressing OK. • Press Options; scroll to Zoom in (or Zoom out) to zoom in (or out) on the picture. • Press Options; scroll to Clear screen to clear the screen. • Press the arrows on the navigation key to draw a line in desired direction (in line mode), or move the cursor to desired position (in dot mode). You can also use the keys on the keypad to control the direction. 67 Extras My Picture allows you to draw your own pictures. You can use them as standby logo and insert them into your messages. The Main Menu Extras Make a dot in dot mode 11. Press Options and Select to save the picture. Editing My Picture 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Press Select. 4. Scroll to the picture you want to edit and press Select. 5. Press Select. 6. Now you can start editing the picture. Erasing My Picture 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Press Select. 4. Scroll to the picture you want to erase and press Select. 5. Scroll to Erase and press Select. Sending My Picture With this function, you can send My Picture via message. 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Press Select. 4. Scroll to the picture you want to send and press Select. 5. Scroll to Send and press Select. 6. Press Options, Select. 68 The Main Menu 7. Enter recipient’s number, or press Names to pick up a recipient from your Phone Book. 8. Press Send. Alarm clock 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Alarm clock and press Select. 4. Scroll to On and press OK. 5. Enter alarm time using alphanumeric keys. Press 6. Press or to select a repeat type. 7. Press Save. Extras Activating alarm clock Activating alarm clock Scroll to Off and press OK in step 4 above. Calendar With the Calendar function, you can easily write down notes and check appointments on each date to keep you organized. Writing note 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. • To write a note for today, press Select two times. • To write a note for a specific date, scroll to Go to date and press Select. Enter the date using alphanumeric keys and press OK. Press Select two times. 4. Specify the following: • Time: enter the time of the event using alphanumeric keys. Press . • Note type: Press or to select a type for this note. Press . • Content: enter the content of the event. Press . • Name: If you want to make a call to someone, enter a name here, or press Options and select From Phone Book to pick up a name from Phone Book. 69 The Main Menu Extras • Phone number: Same as above. You can enter a phone number here or pick up a phone number in Phone Book by pressing Options and select From Phone Book. • Alarm: Press or to select the time of the alarm to be activated before the event. If Off is selected, the alarm will be deactivated. • Circulation type: Press or to select the repeat type of this event. If this event occurs only once, select Off. 5. Press Save. Viewing note Viewing today’s note 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Press Select. 5. Scroll to a note and press Select. 6. Press Select to view the details of selected note. Viewing notes on a specific date 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Go to date and press Select. 5. Enter the date using alphanumeric keys and press OK. 6. Press Select. 7. Scroll to a note and press Select to view the details of selected note. View all notes 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to View all notes and press Select. 5. Scroll to a note and press Select. 6. Press Select to view the details of selected note. Editing note 70 1. Scroll to the note you want to edit and press Select. 2. Scroll to Edit and press Select. 3. Edit the note. When done, press Save. The Main Menu Erasing note Method 1 1. Scroll to the note you want to erase and press Select. 2. Scroll to Erase and press Select. Moving a note to another date 1. Scroll to the note you want to move and press Select. 2. Scroll to Move and press Select. 3. Enter the date using alphanumeric keys. 4. Press OK. Copying a note to another date 1. Scroll to the note you want to copy and press Select. 2. Scroll to Copy and press Select. 3. Enter the date using alphanumeric keys. 4. Press OK. Sending a note 1. Scroll to the note you want to copy and press Select. 2. Scroll to Send note and press Select. 3. You can send the note in two types: • Scroll to Send as SMS to send the note as a short message. The recipient who uses compatible phone will receive the message as a calendar note. 71 Extras Method 2 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Erase notes and press Select. • To erase notes one by one, press Select. Scroll to the note you want to erase and press Delete. • To erase notes on a specific date, scroll to Of chosen day and press Select. Enter the date using alphanumeric keys and press OK. Press Delete. • To erase all notes at once, scroll to All at once and press Select. Press Yes. • To let the phone erase notes automatically, scroll to Auto erase and press Select. Scroll to a desired time period and press OK. The Main Menu Extras Press Select. Enter the recipient’s number, or pick up a recipient from your Phone Book by pressing Names. Press Send. • Scroll to Send as text to send the note as text. You can edit the contents before sending. Press Options, Select. Enter the recipient’s number, or pick up a recipient from your Phone Book by pressing Names. Press Send. Viewing calendar in month mode 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Month mode and press Select. 5. Use the navigation key to go to desired day. The days that have notes are bolded. You can highlight them and press Select to view notes. Jumping to a specific day 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Go to date and press Select. 5. Enter the date using alphanumeric keys and press OK. Account book The Account book of your phone helps you to track your income and expenses records easily. You can also get a balance result of all your accounting records or records in a specific month. Creating an accounting record 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Account book and press Select. 5. Press Select. 6. Complete the following: • Date: Enter the date of the accounting record using alphanumeric keys. When done, press . 72 The Main Menu Extras • Amount: Enter the amount of the accounting record using alphanumeric keys. When done, press . • Item: Enter the description of the accounting record. When done, press . • In/Out: Press or to select the type of the accounting record. 7. Press Save. Viewing accounting records 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Account book and press Select. 5. Scroll to Accounts list and press Select. 6. You can choose to view accounting records of a specific month or view all records. • To view accounting records of a specific month, press Select. Enter the year and month using alphanumeric keys and press OK. Scroll to a record and press Select. Press Select to view the details of the record. • To view all accounting records, scroll to All accounts and press Select. All accounting records will appear on the screen. Scroll to a record and press Select. Press Select to view the details of the record. Viewing results of accounting records 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Account book and press Select. 5. Scroll to Total count and press Select. 6. You can choose to view result of accounting records of a specific month or view result of all records. • To view result of accounting records of a specific month, press Select. Enter the year and month using alphanumeric keys and press OK. Scroll to In (sum of all income amount), Out (sum of all expense amount) or Balance (balance of income and expense) and press Select. Corresponding information will appear on the screen. 73 The Main Menu • To view result of all accounting records, scroll to All accounts and press Select. Scroll to In (sum of all income amount), Out (sum of all expense amount) or Balance (balance of income and expense) and press Select. Corresponding information will appear on the screen. Extras Editing accounting record 1. Scroll to the accounting record you want to edit and press Select. 2. Scroll to Edit and press Select. 3. Edit the accounting record. When done, press Save. Erasing accounting record Method 1 Method 2 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calendar and press Select. 4. Scroll to Account book and press Select. 5. Scroll to Erase accounts and press Select. • To erase accounting records one by one, press Select. Scroll to the record you want to erase and press Delete. • To erase records of a specific month, scroll to Of chosen month and press Select. Enter the year and month using alphanumeric keys and press OK. Press Delete. • To erase all records at once, scroll to All at once and press Select. Press Yes. • To let the phone erase accounting records automatically, scroll to Auto erase and press Select. Scroll to a desired time period and press OK. 1. Scroll to the note you want to erase and press Select. 2. Scroll to Erase and press Select. Playing Games Your phone provides 5 interesting games. To play a game: 1. In standby mode, press Menu. 74 The Main Menu During a game, you can press options above. Ping Pong key to pause and access the The object of this game is to move the pad on the bottom of the screen to keep the ball bounding back at the pad on the top of the screen. Press key to move the pad to the left, and right. The game is over if you fail to catch the ball. Bingo key to the This game is played by two players (you and your phone). Each player assigns 25 non-repeated numbers (1~25) in each cell in a 5-column x 5-row table. Two players cross out a number in turn in order to form a vertical, horizontal or diagonal line on each player’s table. The player who gets 5 lines on his table first wins the game. When the games starts, you will be asked whether to pad the numbers in the table by your self or let the phone pad the numbers automatically. Press OK or No. Press appropriate keys as shown in the illustration below to navigate on the table and cross out a number. 75 Extras 2. Scroll to Extras and press Select. 3. Scroll to Game and press Select. 3. Scroll to a game you want to play and press Select. 4. Scroll to one of the following: • New Game: Start a new game. • Level: Press or to select the level of the game and press OK. • Top Score: View top score. • Instruction: View instructions of the game. The Main Menu Extras Press this key to cross out a number Press or to view your phone’s table. Insect shooting Fire at the insects that fly over your gun to get money and extension of time. The game is over if you can’t get any bug in 60 seconds or when time is up. Press key to move the gun to the left, key to the right and key to fire. The second shot can not be fired until the first shot gets the insect or disappears on the screen. Your money Remaining time Tank destroyer Destroy enemy tank using the gun of your tank. You tank is located on the left part of the screen and enemy tank on the right. Consider the wind direction and speed before shooting. Press key and 76 key to adjust the range of your gun, The Main Menu key and key to adjust angle, and game is over if you get shot by enemy tank. key to fire. The Angle Extras Range Your tank Thirteen Enemy tank Wind direction Wind speed You are given 13 cards and have to separate them in to 3 decks: deck 1 (containing 3 cards), deck 2 and deck 3 (containing 5 cards each). Press or key to select a card and or key to assign selected card to deck 1, 2 or 3. Make the combination of cards in each deck as deck 3 > deck 2 > deck 1. When ready, press key to compare your decks with that of all other 3 players. Press decks of cards, and or or key to view different key to view the result. Press key to view the score of all players. The player that gets the highest score wins the play. Press any key to start the next play. A game consists of 25 plays. Calculator You can use this function to perform simple calculations and covert currencies. Using calculator 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calculator and press Select. 4. Enter numbers using alphanumeric keys. 77 The Main Menu 5. Press key to perform operations. Time pressed Operation Extras You can also press Options and select Add, Subtract, Multiply or Divide to perform corresponding operations. Press Options, Select to get the result of calculation. Converting currencies Setting up exchange rate Exchange rate must be setup before using the currency exchange function. 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calculator and press Select. 4. Scroll to Exchange rate and press Select. 5. Press Select. 6. Enter the exchange rate of foreign unit expressed in domestic unit using alphanumeric keys and press OK. 7. Scroll to Domestic unit expressed in foreign unit and press OK. 8. Enter the exchange rate of domestic unit expressed in foreign unit using alphanumeric keys and press OK. Performing currency exchange 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Calculator and press Select. 4. Enter the amount of currency and press Options. 4. Scroll to In foreign or In domestic and press Select. Stopwatch Split timing 78 1. In standby mode, press Menu. The Main Menu Lap timing 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Stopwatch and press Select. 4. Scroll to Lap timing and press Select. 5. Press Start to start timing. 6. Press Lap to get a lap timing. You can get up to 10 lap timings. 7. Press Stop to stop timing. 8. Press Options and you can do the following: • Press Select to start the timer again. • Save the timing record. Scroll to Save. Enter the name of the record and press OK. • Scroll to Reset and press Select to reset timer. Viewing timing records 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Stopwatch and press Select. 4. Scroll to View times and press Select. 5. Scroll to the timing record you want to view and press Select. Erasing timing records 1. In standby mode, press Menu. 2. Scroll to Extras and press Select. 3. Scroll to Stopwatch and press Select. 4. Scroll to Erase times and press Select. 5. You can erase timing records one by one or all at once: • To erase timing records one by one, press Select. Scroll to the timing record to erase and press Select. Press Yes. 79 Extras 2. Scroll to Extras and press Select. 3. Scroll to Stopwatch and press Select. 4. Press Select. 5. Press Start to start timing. 6. Press Split to get a split timing. You can get up to 10 split timings. 7. Press Stop to stop timing. 8. Press Options and you can do the following: • Press Select to start the timer again. • Save the timing record. Scroll to Save. Enter the name of the record and press OK. • Scroll to Reset and press Select to reset timer. The Main Menu • To erase all timing records at once, scroll to All at once and press Select. Press OK. Operator services Extras If you have subscribed STK (SIM Tool Kit) or other operator services to your operator, there will be an additional item here. The contents of service and how to use them depends on your subscription. Please consult your operator for details. 80 The Main Menu WAP Service Browsing the Internet Going to your homepage 1. In standby mode, press Menu. 2. Scroll to WAP service and press Select. 3. Press Select. 4. Your phone will start connecting to the mobile Internet. If connection is successful, the homepage will appear on the screen. Going to your bookmarked pages 1. In standby mode, press Menu. 2. Scroll to WAP service and press Select. 3. Scroll to Bookmark and press Select. 4. Scroll to a desired bookmark and press Select. 5. Press Select. 6. Your phone will start connecting to the mobile Internet. If connection is successful, the page will appear on the screen. Navigating the Internet using the options menu When browsing the mobile Internet, you can press Options to access the following options: • Home: Scroll to this option and press Select to return to the homepage. • Bookmark: Scroll to this option and press Select to open the bookmark list. To go to bookmarked pages, scroll to a bookmark and press Select two times. To edit a bookmark, scroll to a bookmark and press Select, then scroll to Edit and press Select. Enter the name and address of the book mark and then press OK. To erase a bookmark, scroll to a bookmark and press Select, then scroll to Erase and press Select two times. 81 WAP Service The WAP Service allows you to access mobile Internet information via your operator using the WAP (Wireless Application Protocol) technology. For example, you can browse weather reports, parking information and on-line banking services. The WAP settings must be configured before you can use the WAP service. See "Configuring WAP profiles"on page 83 for details. The Main Menu WAP Service • Open link (appears when you selected a link in the browser): Scroll to this option and press Select to open selected link. • Add bookmark: Scroll to this option and press Select to bookmark current page. • Go to Address: Go to anothe page by entering the address. Scroll to this option and press Select. Enter the address and press OK. • Appearance Settings: This option allows you to configure the appearance of information when browsing the mobile Internet. Scroll to this option and press Select. You will be presented with the following sub-options: Text wrapping: Scroll to this sub-option and press On (or Off) to turn on or off the text wrapping function. Show image: Scroll to this sub-option and press On (or Off) to show or not to show the image. Show title: Scroll to this sub-option and press On (or Off) to show or not to show the title of page. • Download Settings: You can decide whether to accept the cookies or not when browsing. Scroll to this option and press Select two times. Scroll to Allow (to accept cookeis) or Reject (to reject all cookies) and press OK. • Reload: Scroll to this option and press Select to reload current page. • Clear the Cache: Scroll to this option and press Select to delete all cache files in phone memory. • Exit: Scroll to this option and press Select to disconnect from the Internet and exit browser. 82 The Main Menu Configuring WAP profiles Information you need in case you have to set up a WAP profile manually Before setting up a WAP profile, please be sure to obtain the following parameters from your operator: Homepage: Session mode: Temporary Permanent Connection security: On Off Data bearer: GSM Data GPRS IP address: Authentication type: Normal Secure Login type: Manual Automatic Username: Password: Setting up a WAP profile 1. In standby mode, press Menu. 2. Scroll to WAP service and press Select. 3. Scroll to Profiles and press Select. 4. Scroll to an empty profile and press Select. 5. Scroll to Edit and press Select. 6. According to the parameters supplied by your operator, configure the following: Homepage: Enter the address of the homepage. Session mode: Temporary or Permanent. Connection Security: On or Off. Data bearer: GSM Data or GPRS. IP address: Enter the IP address. Authentication type: Normal or Secure. Login type: Manual or Automatic. Username: Enter the username. Password: Enter the password. 83 WAP Service You can configure up to 5 sets of WAP settings. Each set of WAP settings is called a WAP profile. The WAP profile may have already been programmed on your SIM card after you subscribe the WAP service to your system so you can access mobile Internet immediately. Otherwise, you need to configure the settings manually. Please contact your system operator for details. The Main Menu The setup is complete. Now you are ready to access the mobile Internet. Selecting and activating a WAP profile WAP Service If you have multiple WAP profiles for different operators, you can use this function to select one to use. 1. In standby mode, press Menu. 2. Scroll to WAP service and press Select. 3. Scroll to Profiles and press Select. 4. Scroll to a desired profile and press Select. Editing a WAP profile 1. In standby mode, press Menu. 2. Scroll to WAP service and press Select. 3. Scroll to Profiles and press Select. 4. Scroll to the profile you want to edit and press Select. 5. Scroll to Edit and press Select. 6. Edit the contents of the profile. Renaming a WAP profile 1. In standby mode, press Menu. 2. Scroll to WAP service and press Select. 3. Scroll to Profiles and press Select. 4. Scroll to the profile you want to rename and press Select. 5. Scroll to Rename and press Select. 6. Enter the new profile name and press OK. 84 The Main Menu My shortcut You can put 9 most frequently used functions in My Shortcut so you can access them quickly and easily. Using My shortcut 9 frequently used functions are already pre-programmed in My shortcut and you can use them directly. To use the pre-programmed shortcut items: 1. In standby mode, press Menu. 2. Scroll to My shortcut and press Select. 3. Scroll to the item you want and press Select. Customizing My shortcut To customize My Shortcut: 1. In standby mode, press Menu. 2. Scroll to My shortcut and press Select. 3. Scroll to Edit and press Select. 4. Scroll to a desired item and press Select. 5. Specify the position of the item in My shortcut and press Select. 85 Appendix Appendix Menu Appendix Quick Reference Menu To go to this item Inbox Press these keys Menu Select Select Outbox Menu Select Select Write message Menu Select Select Chatroom Menu Select Select Template Menu Select Select Erase all Menu Select Select Profile Menu Select Select Option Menu Select Select Voice mail Menu Select Missed calls Menu Select Select Received calls Menu Select Select Dialed calls Menu Select Select Erase all Menu Select Select Call time Menu Select Select Select Select Call cost Menu Select GPRS data counter Menu Select Select GPRS connection time Menu Select Select Incall count Menu Select Select Call divert Menu Select Select Call waiting Menu Select Select Call barring Menu Select Select Show number Menu Select Select Phone lines Menu Select Select Anykey answer Menu Select Select Auto redial Menu Select Select Appendix Speed dialing Menu Select Select Next call Menu Select Select Profiles Menu Select Select Tone editor Menu Select Select Minute reminder Menu Select Select Language Menu Select Select Backlight Menu Select Select Adjust contrast Menu Select Select Clock Menu Select Select Auto power off Menu Select Select Select Display Menu Select Key lock Menu Select Select Input mode Menu Select Select Restore factory settings Menu Select Select My picture Menu Select Select Alarm clock Menu Select Select Calendar Menu Select Select Game Menu Select Select Calculator Menu Select Select Stopwatch Menu Select Select SIM tool kit Menu Select Select Home Menu Select Select Bookmark Menu Select Select Profiles Menu Select Select Appearance setting Menu Select Select Download setting Menu Select Select Authority certificates Menu Select Select Appendix Go to address Menu Select Select Clear the cache Menu Select Select Inbox Menu Select Select Write message Menu Select Select Last call time Menu Select Select Tone editor Menu Select Select Calendar Menu Select Select Calculator Menu Select Select Display Menu Select Select Access Internet Menu Select Select Game Menu Select Select
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2002:10:29 12:31:44-05:00 Create Date : 2002:10:29 12:31:23-05:00 Title : wolfgang.book Author : kennyhu Creator : FrameMaker 6.0 Producer : Acrobat Distiller 5.0.5 (Windows) Page Count : 58EXIF Metadata provided by EXIF.tools