Chicony Electronics Co DCE310H40 WiFi Home Monitor User Manual H40 UM 20150202 75x 75mm

Chicony Electronics Co Ltd WiFi Home Monitor H40 UM 20150202 75x 75mm

User Manual

WiFi Home Video CameraUser Manual
| 1EnglishNames of PartsLensLEDIndicatorNetworkIndicatorMicro USB PortStandPower/Mode ButtonSpeakerReset microSD Card Slot
1. Insert a microSD Card (suggested class 10, up to 64GB)For initial use, mobile device needs to: 1. Connects to internet (via WiFi, 3G/4G). 2. Download and install App [Unieye Home] from Google Play Store or Apple App Store. Getting Started2. Power on: Plug a USB power cable with the included 5V/2A adapter into one of  tocluded 3. Power off: Press for 3 seconds to turn off camera.Mobile device connects to smart WiFi Home Camera directly via App [Unieye Home] for remote control, live view, Widget display and receives push alerts when events are detected. Camera with 300° pan motor could be remote controlled by Wi-Fi and Bluetooth.Modes Switch in CameraNetwork indicator shows current mode status. Press to switch. Steady purple for direct control Steady blue for Internet controlCamera needs to: NetworkIndicatorUnieye Home| 2English
Wireless & App OperationRun App [Unieye Home] on mobile device and navigate either one of modes:(I) Internet Mode - Internet (II) Local Mode - Direct controlMobile CameraLocalStatus: PurpleStatus: BlueUnieye ServerAP3G/4G Mobile HotspotWireless RouterAPCamera 3G/4G Mobile Wireless RouterAPMobileInternetUnieye HomeInternet Mode Local Mode(I) 【Internet Mode】Mobile device connects to camera via internet for remote control, Widget display and the instant live view from partner's camera.【Local Mode】(II) Mobile device directly connects to camera via WiFi for remote control, live view, pan angel change, camera setup and receives push alerts when noise and motion events are detected. | 3English
Mobile Device Connects to Camera1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camera name.2. Run [Unieye Home].3. Tap【Local】and select the camera to enter View Page. Tap [ ] to scan again if camera is not found.Note: iOS SettingsBefore using 【Internet Mode】on mobile App, ensure WiFi on mobile device is on and network indicator on camera shows steady purple. Remote Control PageInternet Mode Main Page【Internet Mode】1. Run [Unieye Home] and tap .2. Tap Add Camera in list. Enter camera ID and password. Add Camera!mobile, ensure the camera is in 【Internet Mode】 and status indicator shows steady green. | 4English
Remote Control : Advance SetupItems Descriptions Talk to camera from mobile. Mute the sound from camera. Shoot videos or take photos and save to storage on mobile "Album\Unieye Home\“ Pan camera view angel.Items Descriptions Items Descriptions Rescan for cameras Delete camera Switch to local mode Tip for help Add camera About1. Go to [ Setup] [ Internet Settings] Edit Email and AP2. Tap [Save] to complete Email & AP settings.Camera Internet Setup Before using internet cloud service, Email and AP must be properly set up. Note: AP(Access Point) can be Wireless Router or  3G/4G Mobile Wireless Router or 3G/4G Mobile HotspotAPAPAPWireless Router 3G/4G Mobile Wireless Router3G/4G Mobile Hotspot| 5English
Cloud Video Recording Widget displays on mobile desktop Cloud Video Recording (CVR) saves videos and images in your cloud account. For initial use, cloud account should be authenticated. Widget is a small tool for Android that real time shows alert inforamtion on Mobile desktop.1. Go to [Setup] Turn on [Save to CVR] 2. Select a cloud account and enter account information.3. Tap Save on [Setup] page to activate CVR function.1. Add an Unieye Home Widget.2. On widget setting page, select a camera and adjust photo fetch interval. #$%*+7 desktop.Photos on widget update regularly or when events detected.Push AlertWhen camera is in【Internet Mode】and events are detected, Push alerts and Email will be sent to mobile device. | 6English
Note: Record event clips only when mobile device did not connect to camera.Groups Descriptions Camera Settings Edit name, password. Format SD card. Adjust night vision, noise detection, motion detection, image rotation, etc. Internet Settings Edit Email and AP for【Internet Mode】. Events (for camera) In [Setup] Page, tap [Save] to complete settings to camera. Tap [ ] and select [Local Mode] to switch to Local Mode .Items DescriptionsCamera Videos8SD card during motion and noise detection. Setup (for camera) 【Local Mode】Local Mode Main Page Remote Control Page| 7English
Control Camera Angle Set up camera lens angle by using APP. 1. Click [ Pan] .2. Click arrows for control the lens angle. 3. Tap [ ] to set camera angle back to latest setup.| 8English
| 9EnglishCondition Status Indicator Beep Power OnFlash for few seconds, then turn to steady purple. (For 1st power-on , LED status turns blue; Network LED turns purple)1 time【Local Mode】Network LED shows steady purple N/A【Internet Mode】Network LED shows steady blue N/A Power Off No indication 1 time Low Battery Flash in red 2 times Fail connect to 【Internet】Flash in blue for few seconds, then turn to purple N/A Factory Reset No change 3 timesCamera HotkeyForced Shutdown Press and hold for 5 seconds to turn off camera.Forced Factory Settings9<= paper clip into the hole and press lightly to reset. >79Go to App [Unieye Home] Connect【Local Mode】 [Setup] page Reset factory settings.Camera IndicationCamera Hotkey
Situation Cause/SolutionCamera cannot turn on Power is low. Recharge batteryCamera is frozen Press and hold for 5 seconds to force turn off; press again to power on Camera cannot recordNo microSD card or microSD card is full microSD card cannot be recognized Format microSD card in [Unieye Home] or replace microSD cardCamera cannot connect to AP or could server =? +@++J7@7K>7Camera Camera not in WiFi coverage Mobile WiFi is disabled iOS user does not choose camera name in Wi-Fi Settings Tap [ ] on [Unieye Home]Mobile cannot watch live view +@+7K7Mobile cannot connect to cloud server Check mobile 3G/4G or WiFi internet connection @7KMobile cannot watch live view $7!! camera upload or mobile downloadFactory Reset Open the top cover. Insert a small thin paper clip into the hole and press lightly to reset. Troubleshooting【Internet Mode】【Internet Mode】【Local Mode】【Local Mode】| 1English 0
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu