Chicony Electronics Co DCE310H40 WiFi Home Monitor User Manual H40 UM 20150202 75x 75mm
Chicony Electronics Co Ltd WiFi Home Monitor H40 UM 20150202 75x 75mm
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2693119 |
| Application ID | GapupfJHafq/+K+tImLeTw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 55.68kB (696020 bits) |
| Date Submitted | 2015-07-27 00:00:00 |
| Date Available | 2016-09-25 00:00:00 |
| Creation Date | 2015-02-03 17:07:31 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-07-24 15:31:14 |
| Document Title | H40 UM 20150202 (75x 75mm).pdf |
| Document Creator | Adobe InDesign CS6 (Windows) |
| Document Author: | 10005961 |
WiFi Home Video Camera
User Manual
Names of Parts
Power/Mode
Button
Lens
LED
Indicator
Network
Indicator
Speaker
Reset
microSD Card
Slot
Stand
Micro USB Port
English | 1
Getting Started
Mobile device connects to smart WiFi Home Camera directly via App
[Unieye Home] for remote control, live view, Widget display and
receives push alerts when events are detected. Camera with 300° pan
motor could be remote controlled by Wi-Fi and Bluetooth.
For initial use, mobile device needs to:
1. Connects to internet (via WiFi, 3G/4G).
2. Download and install App [Unieye Home] from
Google Play Store or Apple App Store.
Unieye Home
Camera needs to:
1. Insert a microSD Card (suggested class 10, up to 64GB)
2. Power on: Plug a USB power cable with the included
cluded
5V/2A adapter into one of
3. Power off:
Press
for 3 seconds to turn off camera.
Modes Switch in Camera
Network indicator shows current mode status.
to switch.
Press
Steady purple for direct control
Steady blue for Internet control
Network
Indicator
English | 2
Wireless & App Operation
Run App [Unieye Home] on mobile device and navigate either one of
modes:
(I) Internet Mode - Internet (II) Local Mode - Direct control
Unieye Home
Internet Mode
(I)
Local Mode
ăInternet Modeă
Mobile device connects to camera via internet for remote control,
Widget display and the instant live view from partner's camera.
AP
Wireless Router
Status:
Blue
AP
3G/4G Mobile
Wireless Router
Internet
Mobile
Unieye
Server
AP
Camera
3G/4G Mobile Hotspot
(II)
ăLocal Modeă
Mobile device directly connects to camera via WiFi for remote
control, live view, pan angel change, camera setup and receives
push alerts when noise and motion events are detected.
Status: Purple
Local
Mobile
Camera
English | 3
ăInternet Modeă
Before using ăInternet Modeăon mobile App, ensure WiFi on mobile device
is on and network indicator on camera shows steady purple.
Mobile Device Connects to Camera
1. For Android: Turn on [Wi-Fi].
For iOS:
Go to [Settings] [Wi-Fi].
Turn on [Wi-Fi] and select the camera name.
2. Run [Unieye Home].
3. TapăLocalăand select the camera to enter View Page.
Tap [ ] to scan again if camera is not found.
Note:
iOS Settings
Internet Mode Main Page
Remote Control Page
Add Camera
!
mobile, ensure the camera is in ăInternet Modeă
and status indicator shows steady green.
1. Run [Unieye Home] and tap .
2. Tap
Add Camera in list. Enter camera ID and password.
English | 4
Remote Control :
Items
Descriptions
Talk to camera from mobile.
Mute the sound from camera.
Shoot videos or take photos and save to storage on mobile
"Album\Unieye Home\â
Pan camera view angel.
Advance Setup
Items
Descriptions
Items
Descriptions
Rescan for cameras
Delete camera
Switch to local mode
Tip for help
Add camera
About
Camera Internet Setup
Before using internet cloud service, Email and AP must be properly
set up.
1. Go to [
Setup]
[ Internet Settings]
Edit Email and AP
2. Tap [Save] to complete Email & AP
settings.
Note: AP(Access Point) can be
Wireless Router or
3G/4G Mobile Wireless Router or
3G/4G Mobile Hotspot
AP
AP
AP
3G/4G
Wireless Router 3G/4G Mobile
Wireless Router Mobile Hotspot
English | 5
Cloud Video Recording
Cloud Video Recording (CVR) saves videos
and images in your cloud account. For initial
use, cloud account should be authenticated.
1. Go to [Setup]
Turn on [Save to CVR]
2. Select a cloud account and enter account
information.
3. Tap Save on [Setup] page to activate CVR
function.
Widget displays on mobile desktop
Widget is a small tool for Android that real time
shows alert inforamtion on Mobile desktop.
1. Add an Unieye Home Widget.
2. On widget setting page, select a camera and
adjust photo fetch interval.
# $ % * + 7
desktop.
Photos on widget update regularly or when events
detected.
Push Alert
When camera is inăInternet Modeăand events are detected,
Push alerts and Email will be sent to mobile device.
English | 6
ăLocal Modeă
Tap [ ] and select [Local Mode] to switch to Local Mode .
Local Mode Main Page
Remote Control Page
Events (for camera)
Items
Camera Videos
Descriptions
8
SD card during motion and noise detection.
Setup (for camera)
In [Setup] Page, tap [Save] to complete settings to camera.
Groups
Descriptions
Camera Settings
Edit name, password. Format SD card. Adjust
night vision, noise detection, motion detection,
image rotation, etc.
Internet Settings
Edit Email and AP forăInternet Modeă.
Note: Record event clips only when mobile device did not connect
to camera.
English | 7
Control Camera Angle
Set up camera lens angle by using APP.
1. Click [
Pan] .
2. Click arrows for control the lens angle.
3. Tap [
] to set camera angle back to
latest setup.
English | 8
Camera Hotkey
Camera Hotkey
Forced Shutdown Press and hold
Forced Factory
Settings
for 5 seconds to turn off camera.
9< =
paper clip into the hole and press lightly to reset.
Connect
> 79Go to App [Unieye Home]
[Setup] page
Reset
ăLocal Modeă
factory settings.
Camera Indication
Condition
Status Indicator
Beep
Flash for few seconds, then turn to
steady purple.
(For 1st power-on , LED status turns
blue; Network LED turns purple)
1 time
ăLocal Modeă
Network LED shows steady purple
N/A
ăInternet Modeă
Network LED shows steady blue
Power On
N/A
Power Off
No indication
1 time
Low Battery
Flash in red
2 times
Fail connect to
ăInternetă
Factory Reset
Flash in blue for few seconds, then
turn to purple
No change
N/A
3 times
English | 9
Troubleshooting
Situation
Cause/Solution
Camera cannot turn on Power is low. Recharge battery
Camera is frozen
Press and hold
for 5 seconds to force turn
off; press again to power on
No microSD card or microSD card is full
microSD card cannot be recognized
Format microSD card in [Unieye Home] or
replace microSD card
=?
Camera cannot
+@+ +
connect to AP or could
J 7
server
@7K
Camera cannot record
> 7
Camera
ăLocal Modeă
Camera not in WiFi coverage
Mobile WiFi is disabled
iOS user does not choose camera name in
Wi-Fi Settings
Tap [ ] on [Unieye Home]
Mobile cannot watch
live view
ăLocal Modeă
+@+
7K 7
Mobile cannot connect
to cloud server
ăInternet Modeă
Check mobile 3G/4G or WiFi internet
connection
@7K
Mobile cannot watch
live view
ăInternet Modeă
$ 7 ! !
camera upload or mobile download
Factory Reset
Open the top cover. Insert a small thin paper
clip into the hole and press lightly to reset.
English | 1 0
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ďŹ
Reorient or relocate the receiving antenna.
ďŹ
Increase the separation between the equipment and receiver.
ďŹ
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
ďŹ
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna
or transmitter.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 10005961 Create Date : 2015:02:03 17:07:31+08:00 Modify Date : 2015:07:24 15:31:14+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2015:07:24 15:31:14+08:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:819c791c-02b0-4530-b553-d139e861a027 Original Document ID : xmp.did:98DB63C739D6E111991BFFB22927D84E Document ID : xmp.id:C4C0BFACC8AAE4118041E0173EB5371F Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:C2C0BFACC8AAE4118041E0173EB5371F Derived From Document ID : xmp.did:C1C0BFACC8AAE4118041E0173EB5371F Derived From Original Document ID: xmp.did:98DB63C739D6E111991BFFB22927D84E Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:02:02 18:51:39+08:00 Format : application/pdf Title : H40 UM 20150202 (75x 75mm).pdf Creator : 10005961 Producer : Acrobat Distiller 9.0.0 (Windows) Trapped : False Page Count : 12EXIF Metadata provided by EXIF.tools