China Great Wall Computer M7XXXX Monitor User Manual M7WEI

China Great-Wall Computer Shenzhen Co. Ltd. Monitor M7WEI

User Manual

1pc1pcDVI signal cable(optional)1pcCard of guarantee(optional)(optional)1pcPower cord(optional)(optional)Audio cable(optional)g1280x72017.0WXGA 1280x720h rate of 60Hz. The diagonal1pcThe LCD meets VESA DPMS(version1.0p)power management proposal.VESA DPMS proposalprovides three step energy saving modes via horizontal or vertical sync signal searching.Green or blue or white
The schematic diagram of installation and dismantlingFig. 1Install the base upward sound alignment to the hole. and ensureFig. 2 12341234Dismantling the base needs to hold down the button then pluck it down.Fig.3 the foundation base card to take awayP ress from tow sides to take down the stand.Analog
Default resolution of the LCD (Liquid Crystal Display) in the factory can be found in the appendix, and the most ideal graphic quality can be adjusted to. Users can also adjust the graphics according to the following operation. four indicating symbols and corresponding press keys and a LCD lamp can be found in the display panel. The specific functions of these symbols and press keys are listed in the following table:265431Display OSD menu or enter sub-menuOn/off screen powerIndicator cursor movement or the gradual decrease of OSDmanual selection or contrast adjustmentIndicator cursor movement or the gradual increase of OSDmanual selection or contrast adjustmentAutomatically adjust pixel clock, phase, horizontal and vertical position and others or quit from the menu. Green or blue or white -normal actionOrange (yellow) or red or flash-Power Management (that is, DPMS mode: reduce the power consumption to 2W when horizontal or vertical synchronous signal is not received.)H.F:55.5K V.F:60Hz1280x720 How to use on screen display(OSD)3" "Operating procedure1.Press" "Push key to display the OSD menu.2.Press" "Or" "Push key to select the main menu entry.3.Press " "Push key to select sub entry.4.Press" "Or" "Push key to adjust.5.Press " "Push key to exit from the present menu after ending the adjustment.
Adjusting the viewing angleYa) If activated menu is not available, push “ ” key directly to adjust the contrast of display.c) If activated menu is not available, push “ ” key directly to automatically adjust the pixel clock, phase, horizontal and vertical positions and so on.Auto AdjustmentContrastBrightnessVolumeOrThis function can facilitate users to adjust the commonly used menus such as "brightness"and "contrast".b) If activated menu is not available, push “ ” key directly to adjust the or brightness volumeof display(need display support).5Notes: Menu function is a little different in different type. Function nameSub-menu After press and button" " " "Six languages:English,German,French,Spanish,Italian,Simplified,Chinese.Adjust the contrast of the picture.ContrastBrightness Adjust the brightness of the picture. Screen picture can move left or right.Horizontal positionOSD horizontal position Adjust the horizontal orientation of the menu.Screen picture can move up or down.OSD vertical position Adjust the vertical orientation of the menu.Horizontal sizePhase Adjust the noise at the vertical direction of the picture.Volume Adjust the volume (need display support). Input selection A/D or D/A conversion (need display support).Preset temperature in the factory (9300K) (7500K)USER: User-defined color temperatureAUTO: Automatic color adjustment.LanguageRecover to the default value in the factory.Quit Quit from the OSD menu.Vertical positionColor adjustmentRecover the mode in the factory (6500K)Adjust the noise at the horizontal direction of the picture.

Navigation menu