China Great Wall Computer M7XXXX Monitor User Manual M7WEI

Download:
Mirror Download [FCC.gov]
Document ID	1020521
Application ID	kM05UbzF+vCbN0+5cObveA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	485.49kB (6068631 bits)
Date Submitted	2008-10-24 00:00:00
Date Available	2008-10-24 00:00:00
Creation Date	2008-10-15 08:49:40
Producing Software	Corel PDF Engine Version 3.0.0.739
Document Lastmod	2008-10-15 08:49:40
Document Title	M7WEI英文.cdr
Document Creator	CorelDRAW
Document Author:	shengx

1280x720
h rate of 60Hz. The diagonal
WXGA
17.0
1280x720
1pc
DVI signal cable
(optional)
The LCD meets VESA DPMS(version1.0p)power management proposal.VESA DPMS proposal
provides three step energy saving modes via horizontal or vertical sync signal searching.
Green or blue or white
1pc
Card of guarantee
(optional)
1pc
Power cord
(optional)
1pc
Audio cable
(optional)
1
The schematic diagram of installation and dismantling
Analog
Press from tow sides to take down the stand.
Fig. 2
Install the base upward and ensure
sound alignment to the hole.
Fig. 1
Dismantling the base needs to hold down
the foundation base card to take away
the button then pluck it down.
Fig.3
Default resolution of the LCD (Liquid Crystal Display) in the factory can be found in the appendix,
and the most ideal graphic quality can be adjusted to. Users can also adjust the graphics according
to the following operation.
" four indicating symbols and corresponding press keys and a LCD lamp
can be found in the display panel. The specific functions of these symbols and press keys are listed
in the following table:
Display OSD menu or enter sub-menu
Indicator cursor movement or the gradual decrease of OSD
manual selection or contrast adjustment
On/off screen power
Green or blue or white -normal action
Orange (yellow) or red or flash-Power Management (that is,
DPMS mode: reduce the power consumption to 2W when
horizontal or vertical synchronous signal is not received.)
Indicator cursor movement or the gradual increase of OSD
manual selection or contrast adjustment
Automatically adjust pixel clock, phase, horizontal and
vertical position and others or quit from the menu.
How to use on screen display(OSD)
Operating procedure
1.Press"
"Push key to display the OSD menu.
2.Press" "Or" "Push key to select the main menu entry.
3.Press "
"Push key to select sub entry.
4.Press" "Or" "Push key to adjust.
5.Press "
"Push key to exit from the present menu after ending the
adjustment.
1280x720
H.F:55.5K
V.F:60Hz
Sub-menu
This function can facilitate users to adjust the commonly used menus such as "brightness"and "contrast".
a) If activated menu is not available, push “ ”
key directly to adjust the contrast of display.
Contrast
After press "
Contrast
Adjust the contrast of the picture.
Horizontal
position
Screen picture can move left or right.
Vertical
position
Screen picture can move up or down.
Phase
If activated menu is not available, push “
”
key directly to automatically adjust the pixel clock,
phase, horizontal and vertical positions and so on.
Adjusting the viewing angle
Adjust the horizontal orientation of the menu.
Adjust the vertical orientation of the menu.
Volume
Horizontal
size
c)
" button
Adjust the brightness of the picture.
OSD vertical
position
Or
" and "
Brightness
OSD horizontal
position
Brightness
b) If activated menu is not available, push “ ”
key directly to adjust the brightness or volume
of display(need display support).
Function
name
Auto Adjustment
Volume
Input selection
Color
adjustment
Language
Adjust the noise at the horizontal direction of the
picture.
Adjust the noise at the vertical direction of the picture.
Adjust the volume (need display support).
A/D or D/A conversion (need display support).
Preset temperature in the factory (9300K) (7500K)
(6500K)
USER: User-defined color temperature
AUTO: Automatic color adjustment.
Six languages:English,German,French,Spanish,
Italian,Simplified,Chinese.
Recover the mode
Recover to the default value in the factory.
in the factory
Quit
Quit from the OSD menu.
Notes: Menu function is a little different in different type.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 5
Create Date                     : D:20081015084940
Modify Date                     : D:20081015084940
Producer                        : Corel PDF Engine Version 3.0.0.739
Author                          : shengx
Creator                         : CorelDRAW
Title                           : M7WEI英文.cdr

EXIF Metadata provided by EXIF.tools