China T A Wow Stuff RFX-1001H RFX Racing system User Manual RFX IM STAGE1 indd

China Industries Ltd T/A Wow! Stuff RFX Racing system RFX IM STAGE1 indd

Manual

www.realfxracing.comwww.wowstuff.comCONTENTSENGAdditional tools required: Cross Head ScrewdriverEach vehicle requires 3 x 1.5V AAA batteries(not included)2x RealFX AI VEHICLESEach handset requires 3 x1.5V AA batteries(not included)2x RealFX AI R/C HANDSETStarting Grid x1, Pit Lane x2, Chicane x2,R1 90° x4, Straights x312x RealFX SENSOR-TRACKTM PIECESSpeakerSteering & Menu WheelPower ButtonHeadphone PortLED Indicator LightCheckInfoCancelReplay    R/C ModePace CarPracticeChampionshipSpecial function buttons1x HOT REDTM1x FLAME YELLOWTMThrottle triggerForward / ReverseRotate wheelSteering & Menu SelectionRealFX AI R/C HANDSET GUIDESTAGE 101RFX IM STAGE1.indd   1 04/09/2014   07:05
INSTALLING THE BATTERIESFIG 1FIG 2FIG 3FIG 2Please ensure that the batteries are installed by an adult.RealFX AI R/C Handset (each handset requires 3 x 1.5V AA batteries not included.)For best results use high quality brand name Alkaline or Lithium batteries. 1.  Locate the screw on the battery compartment at the bottom rear of the  handset. (FIG 1) 2.   Unscrew the battery cover using a cross head screwdriver. (FIG 1) 3.   Remove the battery cover. (FIG 1) 4.   Insert the batteries according to the polarity shown. (FIG 2) 5.  Screw the battery cover back into place. (FIG 3)RealFX AI Vehicles (each vehicle requires 3 x 1.5V AAA batteries not included.)For best results use high quality branded Alkaline or Lithium batteries. 1.  Locate the screw on the battery compartment on the underside  of the vehicle. (FIG 1) 2.   Unscrew the battery cover using a cross head screwdriver.  (FIG 1)3.   Remove the battery cover. (FIG 1) 4.   Insert the batteries according to the polarity shown. (FIG 2)  5.  Screw the battery cover back into place. (FIG 3) 1.5v AA1.5v AA1.5v AA1.5v AAA1.5v AAA1.5v AAARealFX AI R/C HANDSETRealFX AI VEHICLEFIG 1ONOFFONOFFFIG 3www.realfxracing.comwww.wowstuff.comIMPORTANTAlways use good quality,brand name batteries forpeak performance.02RFX IM STAGE1.indd   2 04/09/2014   07:05
RealFX AI VEHICLE GUIDEThe RealFX AI Vehicles herald a new era in R/C track racing.Never before has it been possible for drivers to race R/C vehiclesat speed on compact tracks, whatever their ability.By employing sophisticated artificial intelligence (AI)and control techniques, it is now possible for an R/Cvehicle to precisely steer a course around a track layout while allowing the driver to set the speed ofthe vehicle and its position across the track,from left to right. This leaves the driver free to concentrate on strategies such as selecting the correct racing line, overtaking opponent’s vehicles, when to speed up on the straight and when to brake when approaching bends. Just remember, even though we have redefined R/C racing, the laws of physics still apply! Take a bend too fast and your vehicle WILL slide off the track. We couldn’t take all the skill out ofit now, could we?Clean car bodies only with a clean damp clothRemove dust from the vehicle tires only with a clean damp clothClean all other vehicle parts with a clean dry, lint free cloth. Moisture could damage the sensitiveelectronic components.Removing the body shell: (see stages 1 & 2)1. Hold the car chassis by its front wheels and pull back the front bumper of the car body shell,so the white plastic tab on the car chassis is released from its fixing slot on the car body shell2. Once released, lift the car chassis from the car body shell.Replacing the body shell: (see stages 3 & 4)3. Hold the car chassis by its sides and locate the black tab at the back of the car chassis into thefixing slot at the back of the car body shell4. Keeping the rear tab in the rear fixing slot, lower the front of the car chassis into the body.Once the white tab is resting on the front fixing slot, press on front end of the car chassis or white fixing tab to secure it into the front fixing slot.RealFX AI VEHICLE TECH INFOCONTROLSRealFX AI VEHICLE CAREwww.realfxracing.comwww.wowstuff.comRotate wheelTo Steer Left or RightThrottle triggerForward / ReverseLRLRFORWARDREVERSE031STAGE2STAGE3STAGE4STAGERFX IM STAGE1.indd   3 04/09/2014   07:05
04STARTING GRID(x3) LONG STRAIGHT(x4) R1 90ºPIT LANE INPIT LANE OUT CHICANE 2CHICANE 1AI DIGITAL™ TRACK CONSTRUCTION & LAYOUTREALFX SENSOR-TRACKTM GUIDE12 pieces of RealFX Sensor-TrackTM  are provided for you to create your raceway. Simply connect the pieces together as shown below.To disconnect the track parts, gently lift the centre of the track, so the tabs are released from the slots.IMPORTANT: Take car not to pull the tabs at an angle as this may cause the tab or slot to tear or split.PARTS AND ASSEMBLYwww.realfxracing.comwww.wowstuff.comLocate the slot on one side, and push the tab on the piece of track you are adding into the slot.Now do the same on the other side.2STAGESLOTTAB1STAGERFX IM STAGE1.indd   4 04/09/2014   07:05
RACE CIRCUIT LAYOUTSwww.realfxracing.comwww.wowstuff.com 05For best care and longevity of your RealFX Sensor-TrackTM please follow these simple steps. Clean only with a clean damp cloth.Avoid walking on track or setting heavy object down on it.Do not leave in direct sunlight.Always pack away flat when not in use, to avoid creasing and folds.RealFX SENSOR-TRACK™ CARE16 primary track layouts are possible with the track pieces provided, each presenting different challenges and benefits. Move the start grid around for variations and test your skill at racing off from pole position.RFX IM STAGE1.indd   5 04/09/2014   07:05
SETTING GENERAL PREFERENCESSwitch on vehicle.(Switch located on the underside of vehicle)Switch on handset“Welcome to RFX RacingSwitch on your vehicle”“Vehicle & Handset paired.Select vehicle mode.”When you turn on the handset for the first time, you will be asked to select your language. You may also be required to do this after replacing the batteries in the handset.Ensure you have installed batteries correctly in all devices.GETTING STARTEDSET LANGUAGEPAIRING THE HANDSET AND VEHICLESwitch on handset“English”(Handset LED will flash Blue)Pull trigger to confirmRotate wheelwww.realfxracing.comwww.wowstuff.comRotate wheelThrottle triggerRotate the steering wheel to cycle through the list of available languages (English, French, Russian, Japanese, Spanish, Arabic, Italian and German). When the handset speaks the name of the language that you wish use, pull the throttle trigger or press the “Check” button(Handset LED will flash Blue)(Handset LED will illuminate solid Blue)Pressing the      button will launch the options menu. The handset will present you with four menu options in turn that can be adjusted. To change the setting for each option, rotate the steering wheel to cycle through the list of available settings. When the handset speaks the desired setting, pull the throttle trigger or press the         button. The menu will then advance to the next option. Continue this process until the handset announces “Select vehicle mode”.Always remember to switch your vehicle off when not in use.If you forget to do so, your vehicle will make a twitch every minute, to help remind you!06RFX IM STAGE1.indd   6 04/09/2014   07:05
PRESS - Allows the overall sound level of the handset to be adjustedbetween 1 (quietest) and 5 (loudest).HANDSET VOLUMEAllows engine sound effects emitted by the handset during alldriving modes to be turned on or off.ENGINE SOUNDSDuring a race, drivers can switch their vehicles to R/C Assist mode by pressing the R/Cbutton (see R/C mode below). Setting this option to “Novice” will limit the speed of the car while in R/C Assist Mode, making it easier to control, while “Expert” will remove this speed limit.R/C ASSISTSetting this option to “On” will require the driver to press the R/C button once to enter R/C Assist mode during a race and again to return to AI assisted driving. Setting this optionto “Off” means that the vehicle will remain in R/C Assist mode only while the R/C button is held down and will return to AI assisted driving when it is released.R/C ASSIST TOGGLEMENU OPTIONSwww.realfxracing.comwww.wowstuff.comEXITING A VEHICLE MODE“Exit Mode?”If at any time, you wish to exit a vehicle mode and return to the main menu, simply press the        ...  button.  If you are in a race, the handset will then ask you to confirm that you wish to exit the mode that you are in. To do so, press the         .     button.PRESS - R/C MODEAllows the vehicle to be used as a regularR/C vehicle.Ensure you have followed ‘Getting Started’ on page 05 before commencing.“R/C Mode”(Handset LED will illuminate Cyan)07RFX IM STAGE1.indd   7 04/09/2014   07:05
PRESS - PRESS - Allows a vehicle to be driven around the track using the AI assisted control, with lap times and new lap records announced.Ensure you have followed ‘Getting Started’ on page 06 before commencingPosition the vehicles on the starting grid either by hand or by driving them there (vehicle is currently in R/C mode) and ensure that the vehicle is facing the start / finish line.GAME PLAY - QUICK STARTPRACTICE MODE“Practice... Position vehicleon the starting grid andpress the check button”IMPORTANTYou can make a car drive onits own by pressing the PaceCar button before pressing the check button.PRESS - Allows vehicles to be raced against each other, controlled by either a human driver or the onboard AI.GAME PLAY - RACE MODECHAMPIONSHIP MODE“Championship.Master.PLAYER ONE!”Pull trigger to confirmRotate wheel“3, 2, 1...  GO!”www.realfxracing.comwww.wowstuff.com(Handset LED will illuminate Purple)(Handset LED will flash Red 3 timesand then illuminate Green)Whichever player is designated “Player One” is the race “Master”. The Master has control over all race settings and when the race starts. If at any time during a race, the Master exits championship mode, the current race will be cancelled for all vehicles.IMPORTANT08N.B. THE CARS MUST RACE IN A CLOCKWISEDIRECTION SHOWN BY THE ARROWS ON THESTART GRID. RACING IN AN ANTI CLOCKWISE DIRECTION WILL AFFECT THE CARSPERFORMANCE AND AI DRIVE ASSIST™RFX IM STAGE1.indd   8 04/09/2014   07:05
Between 10 and 990.No. of LapsRequires that a driver returns their vehicle to the pit lane to refuel to avoid running out of fuel.Fuel ConsumptionWhen enabled, this allows drivers to impose either a bad gear change or an oil spill on any one of their opponents.Targeted HazardsGAME PLAY - RACE MODE CONT...There are three race types, Novice, Expert or CustomThe race type can be selected by rotating thesteering wheel until the desired race type is spoken and then pulling the throttle trigger orpressing the         button.RACE MODES - Novice - Expert - CustomPull trigger to confirmRotate wheelwww.realfxracing.comwww.wowstuff.comRACE PARAMETERSDepending on the type of race you choose, you will be presented with different race conditions, and in thecase of a “Custom” race, you are given total control over what conditions are in effect:CUSTOM RACEIf you selected a “custom” race then you will need to set the parameters for the race by working through the custom race menu. For Novice and Expert races, jump to page 10, stage 2.During a race, vehicle tires will deteriorate. Initially, this will only cause slowing of the vehicle but, if left too long, will cause a blow out.Tire WearDuring the race certain events can occur that will cause your car to malfunction. These occur randomly and take the form of an oil spill (vehicle swerves), bad gear change (car slows down), transmission failure (car slows down until returned to pit for repair).Random HazardsRACE TYPE NO.LAPS TIREWEARFUELCONSUMPTIONRANDOMHAZARDSTARGETEDHAZARDSNovice 25 No No Yes NoExpert 50 Yes Yes Yes NoCustom User Defined User DefinedUserDefined User Defined User Defined09RFX IM STAGE1.indd   9 04/09/2014   07:05
Toggle from 10 t0 100 laps thenpull trigger to confirm.PRESS - Position the vehicles on the starting grid either by hand or by driving them there(vehicle is currently in R/C mode) and ensure that the vehicle is facing the start/finish line.GAME PLAY - CUSTOM RACE MODECHAMPIONSHIP CUSTOM MODE“Custom.   Number of laps?”Toggle On / Off then pulltrigger to confirm.“Tire wear?”Toggle On / Off then pulltrigger to confirm.“Fuel usage?”Toggle On / Off then pulltrigger to confirm.“Random hazards?”Toggle On / Off then pulltrigger to confirm.“Targeted hazards?”“Position vehicle on thestarting grid andpress the check button”IMPORTANTYou can make a car drive onits own by pressing the PaceCar button before pressing check button.Pull trigger to confirmRotate toggle“3, 2, 1...  GO!”www.realfxracing.comwww.wowstuff.com1STAGE2STAGE3STAGE(Handset LED will flash Red 3 timesand then illuminate Green)10N.B. THE CARS MUST RACE IN A CLOCKWISEDIRECTION SHOWN BY THE ARROWS ON THESTART GRID. RACING IN AN ANTI CLOCKWISE DIRECTION WILL AFFECT THE CARSPERFORMANCE AND AI DRIVE ASSIST™RFX IM STAGE1.indd   10 04/09/2014   07:05
JOIN AS A COMPETITORGAME PLAY - ADDING ADDITIONAL VEHICLESPRESS - “Championship... Player ‘2, 3 OR 4’ joinedthe race”PRESS - “Pace Car. Novice”IMPORTANTThe race will start whenplayer one presses theCheck buttonJOIN AS PACE CARPACE CAR - Novice / Expert / Offwww.realfxracing.comwww.wowstuff.comPressing the “pace car” again will cycle through, novice mode(slower running speed), expert mode (higher running speed) and off(human competitor).PRESS - “Championship... Player ‘2, 3 OR 4’ joinedthe race”IMPORTANTThe race will start whenplayer one presses theCheck buttonImportant: Wait for Player 1 to set up a race and be declared "Master"before attempting to join the race as either a competitor or pace car,otherwise you may inadvertently set up a second independent race.11RFX IM STAGE1.indd   11 04/09/2014   07:05
Rotate wheelTo Steer Left or RightAI DRIVE ASSISTTMDURING THE RACEHOW TO RACEwww.realfxracing.comwww.wowstuff.comAI assisted driving makes controlling an R/C vehicle in a confined space simple, even for the most inexperienced R/C driver.When the LED on the handset illuminates green, simply pull on the throttle trigger as you would with a regular R/C vehicle. However, instead of you having to steer the vehicle around the track, the on-board AI will help the car follow it.Of course, if you go too fast, you will almost certainly come off at the bends, and that’s where the skill comes in. By using the steering wheel, you can position your vehicle anywhere across the track from the dark edge to the light edge. Not only does this mean that you can overtake opponents at any time, but also that you can position your vehicle for the optimum racing line going into corners and steer around bends!Lap Counter/Lap timerEach time a vehicle passes the start/finish line, the driver’s handset will announce either the lap number or the lap time followed by the player’s position in the race. To toggle between these settings press the       button on the handset.R/C AssistIf your vehicle leaves the track at any point during the race, engaging the R/C Assist (either by pressing the R/C button or pressing and holding the R/C button, depending on the R/C Assist Toggle setting – see page 07) allows you to drive your vehicle back onto the track and return to the AI assisted driving mode (either by pressing the R/C button again or releasing the R/C button).R/C assist can also be useful to help steer the vehicle in and out of the pit lane. (See page 07)12RFX IM STAGE1.indd   12 04/09/2014   07:05
HOW TO RACE CONTINUEDwww.realfxracing.comwww.wowstuff.comDURING THE RACE CONT...Pit StopsDuring a race with hazards, fuel consumption or tire wear enabled, your vehicle will most likely require maintenance of some kind - either to prevent a catastrophic failure or to repair one. Should you be called to the pit lane, approach the entrance to the pit and engage R/C assist mode. This will allow you to steer off the main track and into the pit lane. Once your vehicle is on the pit lane gradient, R/C assist mode can be disengaged.As your vehicle crosses the entry marker to the pit lane, the handset will announce “Pit” and as your vehicle passes over the exit marker you will hear “You’re good to go”. At this time, all vehicle handicaps are removed and, if enabled, targeted hazards are replenished.If you do not hear both “Pit” and “You’re good to go”, then you did not drive through the pit lane accurately enough and will need to attempt your pit stop again.“You’re good to go!”“Pit!”13Targeted HazardsIf targeted hazards have been enabled, a driver can “launch” a hazard at an opponent wherever they are on the track (provided that the targeted vehicle is not in the pit lane, is not moving or is configured as a pace car.Each vehicle starts the race with three targeted hazards that can be launched at an opponent. This is done by pressing the numbered special function button that corresponds to the target’s player number. The targeted opponent will then be hit by either an oil slick or a bad gear change.NOTE: A player can be reminded of their own player number by pressing the '   ' button during the race.Once a player has used up all three of their targeted hazards, they can return to the pit lane to be rearmed with a further three targeted hazards. There is no limit to the number of times that a vehicle can be rearmed in this way.Pace CarsPace cars are not affected by random hazards, targeted hazards, tyre wear, or fuel consumption even if human controlled vehicles in the race are.If a pace car leaves the track, for any reason, the onboard AI will disable the vehicle until it is manually returned to the track and the       button is pressed on the corresponding handset.RFX IM STAGE1.indd   13 04/09/2014   07:05
PRESS - HOW TO RACE CONTINUEDwww.realfxracing.comwww.wowstuff.comAFTER THE RACEThe race finishes when any player completes the total number of laps, and then all other players (except pace cars) finish their current lap.When the race is finished, the handsets will tell you:Which player took 1st, 2nd, 3rd, 4th place, which player had the fastest lap and what the fastest lap time was.“Replay last race?”PRESS -  TO CONFIRMTO DECLINEMASTER HANDSETPRESS - “Championship.Press the check button tojoin race or the ‘X’ buttonto cancel”PRESS -  TO CONFIRMTO DECLINECOMPETITORSTo hear your fastest lap time, press the      button14RFX IM STAGE1.indd   14 04/09/2014   07:05
Symptom Cause SolutionBatteries are low or faulty Replace the batteriesInsert high quality Alkaline or Lithium batteriesVehicle and/orR/C handset keeps switching offVehicle batteries are low Replace the batteriesInsert high quality Alkaline or Lithium batteriesVehicle running slowlyVehicle batteries low (likely) or handset batteries low (possible)Replace vehicle batteries, if the problem persists, replace handset batteriesHandset says "Connection Lost"Vehicles were turned on simultaneouslyTurn off all vehicles and handsetsand turn back on each handsetand vehicle in turn2 vehicles pair with onehandset.Dust or dirt on the track or vehicle tiresClean track and tires gently witha clean damp clothVehicles slide off of the track at the bends even at low speedVehicle will not pair with the R/C handsetBatteries in the vehicle or R/C handset are low on powerReplace the batteriesInsert high quality Alkaline or Lithium batteriesHandset batteries low Replace handset batteriesHandset resets to “Welcome to RealFX Racing”Incorrect language set atstartupSwitch on the handset while holding down the 'X' buttonThe handset is not speakingthe language I requireVehicle is set in pace car mode. Restart the race and set the pace car settings to “off”Vehicle is driving itself during a championship raceHandset may be set to low volumeIncrease volume in the systemsettings menu (see page 07)Handset volume is lowRealFX is a registered trademark of China Industries Ltd. t/a Wow! Stuff.Protected by patents GB2482119, GB2482120, GB2482121. International patents pending.For Support Videos, FAQs and details on spare parts go online to: www.realfxracing.comTROUBLESHOOTINGDECLARATION OF CONFORMITY0678 Made in ChinaManufacturer’s Name:    China Industries Ltd. T/A Wow! StuffManufacturer’s Address:    Creative Industries Centre, Wolverhampton Science Park,      Wolverhampton, WV10 9TG, UKType of Equipment:    REALFX RACING - STAGE 1Model Number:   RFX-1001 Year of Manufacture:    2014Application of Council Directive(s): 1999/5/EEC  The Radio Equipment and Telecommunications Terminal Equipment 2000 (and its amending directives)Standard(s) to which Conformity is declared: EN60950-1, EN62479, EN62115,EN301 489-1/3, EN300 440-1/2I hereby declare that the equipment named above has been tested and found to comply with the relevant sections of the above referenced specifications. The unit complies with all essential requirements of the Directives.Place: Wolverhampton, UK      Date: 21st August 2014        Graeme Taylor, Director   www.realfxracing.comwww.wowstuff.com 15RFX IM STAGE1.indd   15 04/09/2014   07:05
                                                    Not suitable for children under 3 years old due to small parts which may represent a choking hazard. Recommended for use by children over 6 years old. This product operates on 2.4GHz frequency. Please retain this information for future reference. Adult supervision required. Battery Information:•   Different types of batteries or new and used batteries are not to be mixed.•   Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.•   Batteries are to be inserted with the correct polarity.•   Exhausted batteries are to be removed from the toy.•   The supply terminals are not to be short-circuited.•   Non-rechargeable batteries are not to be recharged.•   Rechargeable batteries are only to be charged under adult supervision.•   Rechargeable batteries are to be removed from the toy before being charged.Always:•   Make sure battery compartments are secure.•   Use batteries of the correct size and type. •   Fit batteries correctly observing the plus and minus marks on the battery and compartment. •   Replace a whole set of batteries at one time. •   Remove dead batteries from equipment.•   Remove batteries from appliance that will not be used again for a long time.•   Please remember that batteries should be kept away from young children as they could be easily  swallowed. •   Seek medical advice if you believe a cell has been swallowed.•   Please ensure that batteries are installed by an adult prior to use.Never:•   Dispose of batteries in a fire. Consumers have a significant role to play in reducing the impact of waste electrical and electronic equipment on the environment. You can help by re-using or recycling such equipment. The crossed out wheelie-bin symbol indicates that the product & batteries must not be disposed of in domestic waste as they contain substances which can be damaging to the environment and human health. If you cannot re-use or recycle the product or batteries, please use designated collection points, or civic recycling facilities to dispose of them.Conforms to the safety requirements of ASTM F963.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:· Reorient or relocate the receiving antenna.· Increase the separation between the equipment and receiver.· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.· Consult the dealer or an experienced radio/TV technician for help.The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm for all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.www.realfxracing.comwww.wowstuff.com 16RFX IM STAGE1.indd   16 04/09/2014   07:05

Navigation menu