ChipSiP Technology CWFB201-XXX 5G+2.4G 2T2R AP FMC User Manual
ChipSiP Technology Co.,Ltd. 5G+2.4G 2T2R AP FMC
Contents
- 1. user manual
- 2. user manual rev
user manual
8F-1, No.186, Jian-yi Road, ChungHo City, Taipei
County, Taiwan Zip 235
TEL (886)-2-8227-1799 FAX (886)-2-8227-1798
E-mail Sales@ChipSiP.com
http://www.ChipSiP.com
Brief Datasheet
PRODUCT：
：：
： CWFB201
DESCRIPTION：
：：
：
802.11a/b/g/n 2x2 Full Mini Card ( FMC ) AP
Module
Approved Signatures
Contact Person：
：：
：
802.11a/b/g/n FMC
March, 2011 Rev 0.4
Chipsip Solution is a small-sized, 802.11n AP
board FMC ( Full Mini Card Form Factor) that
achieves a data rate up to 300Mbps. It is 6 times
faster than the legacy 11abg.
This product supports AP/Bridge mode. It is
ideal for multi-purpose installation to share
wireless connection.
By supporting 64/128-bits WEP, TKIP, WPA,
WPA2 and WPS, helps protect your data and
privacy during transmission.
This module could be mounted on system
board like IPTV, STB, Media Player, Femto,
XDSL, Cable Modem, Industrial PC, Ethernet
Switch, Printer Server, Connected TV, Smart
Phone And Portable CPE For WiMAX/LTE
No could be configured as iNIC function to
support driver loading from host platform
Ralink Chipset with interface with Fast
Ethernet Turbo MII, Gigabit Ethernet
GMII,, USB & UART….
Boot from Flash
Date Rate up to 300Mbps
Security: 64/128-bits WEP, TKIP,WPA,
WPA2, AES
Standard
IEEE 8
02.11
a/b/g/n
Wireless LAN
2
T
2
R mode
( 5GHz 2x2 MIMO or 2.4GHz 2x2
MIMO )
Antenna
iPex Connector *2
52
-
pin
Interface
GMII/ MII *1 ( Turbo MII mode )
USB*1 ( Host mode )
UART*1
GPIO
Reset to Default
VCC/GND
Frequency Range
802.11a 5.15~ 5.85GHz
802.11b/g 2.4~2.484GHz
802.11n 2.4~2.484GHz and 5.15GHz~ 5.85 GHz ( Subject to local
regulations)
Data Rate
802.11b: 1, 2, 5,5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps
Description
Features
Specification
802.11a/b/g/n FMC
March, 2011 Rev 0.4
Transmit Power +/- 2dBm
(EIRP)
11n HT40 MCS7 : +14dBm
11b : +17dBm
11gn :+15dBm
11
a
: +13
dBm
Receiver Sensitivity
11an/gn -66dBm at HT40 ( MCS7 )
11an/gn -67dBm at HT20 ( MCS15 )
11a/g -72dBm at 54Mpbs
11b
-
8
0
dBm at 11Mpbs
Range Indoors: up to10~ 25 meters
Dimension
Full Mini Card ( FMC )Form Factor
510x260x2.5mm
Certifications
FCC/CE
by request
Software function
Network Features:
DHCP Client/Relay/Server
Dynamic DNS
NTP Client
DNS Cache/Proxy
Firewall
1. MAC/IP/Port Filter
2. Virtual Server
3. DMZ
4. Content Filter
WiFi:
20MHZ/40MHZ bandwidth.
Support Multiple SSID
Clock rate up to 600MHz and High Throughput Modes.
Support WPS
High security with build-in: WEP 64/128, TKIP, WPA, WPA2, AES
mixed,802.1x and 802.11i
802.1X Authentication with RADIUS Client
QoS-WMM.WMM-PS
Golden Finger & Connector Information :
Pin definions of Mini Card could be used for standard mini PCI-e in PC/NB as well. Leverage unsed pins for
WiFi, Ethernet, control and VCC signals.
802.11a/b/g/n FMC
March, 2011 Rev 0.4
PIN DEFINITION
Pin Number Signal Pin Number
Signal
51 UART_RX 52 +3.3Vaux
49 UART_TX 50 GND
47 A/G band 48 +1.26V
45 WPS_PBC/Reset to default 46 NC
43 GND 44 NC
41 +3.3Vaux 42 WLAN_LED
39 +3.3Vaux 40 GND
37 GND 38 USB0_DP
35 GND 36 USB0_DN
33 MII_TXCLK 34 GND
31 MII_TXEN 32
NC
29 GND 30
NC
27 GND 28 +1.26V
25 MII_TXD0 26 GND
23 MII_TXD1 24 +3.3Vaux
21 GND 22
PERST# ( HW RST_N )
19 MII_TXD2 20
WPS LED
17 MII_TXD3 18 GND
— Mechanical Key — Mechanical Key
15 GND 16
NC
13 MII_RXCLK 14
NC
11 MII_RXDV 12
AP/client (SW RST)
9 GND 10
MII_MDIO
7 MII_RXD0 8
MII_MDC
5 MII_RXD1 6 +1.26V
3 MII_RXD2 4 GND
1 MII_RXD3 2 3.3Vaux
802.11a/b/g/n FMC
March, 2011 Rev 0.4
Evaluation Test Board
802.11a/b/g/n FMC
March, 2011 Rev 0.4
Mini Card Connector
802.11a/b/g/n FMC
March, 2011 Rev 0.4
Mechanical Dimension:
Labeling
The RF module for controller labeled as below.
The label that is placed on the module is too small to hold the required FCC
information, then that information appear in the user manual for this device. In
addition, the” Contains FCC ID: O7N-CWFB201-XXX” label also must be placed
on the outside of the end product system.