Christie Digital Systems Canada CRMX100 ASSY PCB RF Module User Manual 020 100489 02 LIT TECH REF RFModule

Download:
Mirror Download [FCC.gov]
Document ID	1210303
Application ID	S/V4hjWLFniEt9+2SFhCLQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.65kB (495659 bits)
Date Submitted	2009-12-08 00:00:00
Date Available	2009-12-09 00:00:00
Creation Date	2009-11-27 10:11:34
Producing Software	GPL Ghostscript 8.63
Document Lastmod	2009-12-01 11:04:56
Document Title	020-100489-02_LIT TECH REF_RFModule.fm
Document Creator	PDFCreator Version 0.9.6
Document Author:	nschneider

DESCRIPTION
EL
20 l E
AS
09
ED
RF Module
Technical Reference Information
on
tro
FF
2.4GHz IEEE 802.15.4 Compliant RF Transceiver
High Performance and Low-Power 8051 Microcontroller
Two Serial Unart Interface
2.4GHz Front End Amplifier
Supports RemoTI stack from Texas Instruments
16 General Purpose I/O ports
Chip antenna or RP-SMA connector for external antenna
Miniature Footprint 35.80 x 23.11 mm
Long Range up to 225 meter
Max 10 mW output power
RoHS compliant
•
•
•
•
•
•
•
•
•
•
•
FEATURES
1,
en
IA
D LL
D ocum Y
The CRMX-100 RF module is a 2.4GHz IEEE 802.15.4 transceiver designed for proprietary, Zigbee
or RF4CE application. The module is based on Texas Instruments CC2530 that combines the excellent
performance of a RF transceiver with industry–standard enhanced 8051 microcontroller unit, 128 KB
in-system programmable flash memory, 8-KB RAM, and many other features. The RF module
incorporates Texas Instrument CC2590 RF Front End power amplifier (PA) and low-noise amplifier
(LNA) for increased output power, and improved receiver sensitivity respectively. The module has an
option to either be populated with a chip antenna or reverse-polarity SMA connector to be used with an
external antenna. The RF module has various operating modes, making it highly suited for systems
where ultralow power consumption is required.
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
1 of 8
ABSOLUTE MAXIMUM RATINGS (1)
Rating
Supply voltage
All supply pins must have the same
voltage
Voltage on any digital pin
MAX
3.9
UNIT
VDC
-0.3
VDD + 0.3,
Max 3.9
+10
125
260
VDC
dBm
°C
°C
kV
500
-40
According to IPC/JEDEC J-STD-020C
All pads, according to human-body
model, JEDEC STD 22, method A114
According to charged-device model
JEDEC STD 22, method C101
EL
20 l E
AS
09
ED
Input RF level
Storage Temperature Range
Reflow soldering temperature
ESD(2)
MIN
-0.3
1) Stress beyond those listed under the Absolute Maximum Ratings may cause permanent damage to
device. These are stress ratings only, and functional operation of the device at these or any other
conditions beyond those indicated under Recommended Operating Conditions is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
on
tro
IA
D LL
D ocum Y
2) CAUTION! ESD sensitive device. Precaution should be used when handling the device in
order to prevent permanent damage.
Min
2405
-40
Max
3.6
2480
85
Unit
VDC
MHz
°C
FF
Rating
Power Supply Voltage (VDD)
Input Frequency
Ambient Temperature Range
1,
en
RECOMMENDED OPERATING CONDITIONS
PIN DESCRIPTIONS
The RF module has 24 edge I/O pins for connecting to a host board. The following table enumerates
and defines the RF module pinout.
2 of 8
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
PIN
PIN NAME
PIN TYPE
PIN DESCRIPTION
GROUND
GND
Ground
P2_2
General Purpose Digital I/O Port 2_2
P2_1
DI/DO/AI
DI/DO/AI
P2_0
DI/DO/AI
General Purpose Digital I/O Port 2_0
P1_7
DI/DO/AI
General Purpose Digital I/O Port 1_7
P1_6
DI/DO/AI
General Purpose Digital I/O Port 1_6
P1_5
DI/DO/AI
General Purpose Digital I/O Port 1_5
GROUND
GND
P1_3
DI/DO
11
P1_2
DI/DO
General Purpose Digital I/O Port 1_2
Not Connected
14
P0_6
DI/DO
15
P0_5
DI/DO
16
P0_4
DI/DO
17
GROUND
GND
18
P0_3
DI/DO
19
P0_2
20
RESET
21
P0_1
FF
P0_0
General Purpose Digital I/O Port 1_0
General Purpose Digital I/O Port 0_6
VDD
GROUND
on
tro
DI/DO
General Purpose Digital I/O Port 0_5
General Purpose Digital I/O Port 0_4
en
P1_0
IA
D LL
D ocum Y
13
24
General Purpose Digital I/O Port 1_3
12
23
Ground
Not Connected
10
22
EL
20 l E
AS
09
ED
General Purpose Digital I/O Port 2_1
Ground
DI/DO
1,
General Purpose Digital I/O Port 0_3
DI
Reset, active low
General Purpose Digital I/O Port 0_2
DI/DO
General Purpose Digital I/O Port 0_1
DI/DO
General Purpose Digital I/O Port 0_0
PI
Power Supply Input
GND
Ground
DI= Digital Input
DO= Digital Output
AI= Analog Input
AO=Analog Output
PI = Power Input
GND = Ground
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
3 of 8
ANTENNA
The RF module can either be populated with a chip antenna or Reverse-Polarity SMA connector for an
external whip antenna. The regulatory certification will be completed with Yageo Corporation’s 5320
ceramic chip antenna (part# CAN4311153002501K) and also with the PRO-CELL CO., LTD’s dipole
antenna (part# RA-A01) with Reverse-Polarity SMA connector.
DIMENSIONS: CRMX-100 RF MODULE WITH CHIP ANTENNA
on
tro
FF
1,
en
IA
D LL
D ocum Y
EL
20 l E
AS
09
ED
All dimensions are in millimeters, unless otherwise noted.
4 of 8
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
DIMENSIONS: CRMX-100 RF MODULE WITH RP-SMA
CONNECTOR
on
tro
FF
1,
en
IA
D LL
D ocum Y
EL
20 l E
AS
09
ED
All dimensions are in millimeters, unless otherwise noted.
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
5 of 8
on
tro
FF
1,
en
IA
D LL
D ocum Y
PCB KEEP-OUT AREAS
EL
20 l E
AS
09
ED
PCB PAD LAYOUT
6 of 8
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
NOTICE
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user's authority to operate the equipment.
EL
20 l E
AS
09
ED
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
1) this device may not cause interference and
on
tro
This device complies with Part 15 of the FCC/IC Rules.Operation is subject to the following two
conditions:
IA
D LL
D ocum Y
2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
en
FCC/IC RF Radiation Exposure Statement:
1,
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
FF
Contains FCC ID: XU6-CRMX100
Contains IC: 8691A-CRMX100
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)
7 of 8
EL
20 l E
AS
09
ED
on
tro
1,
en
IA
D LL
D ocum Y
FF
8 of 8
RF Module Datasheet Technical Reference Information
020-100489-02 Rev. 01 (11-2009)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : GPL Ghostscript 8.63
Keywords                        : 
Modify Date                     : 2009:12:01 11:04:56-05:00
Create Date                     : 2009:11:27 10:11:34-05:00
Creator Tool                    : PDFCreator Version 0.9.6
Metadata Date                   : 2009:12:01 11:04:56-05:00
Document ID                     : b054d8c3-ddc2-11de-0000-afa779d57d72
Instance ID                     : uuid:410180d9-da3b-4e0e-8c28-f2d24a12244e
Format                          : application/pdf
Title                           : 020-100489-02_LIT TECH REF_RFModule.fm
Creator                         : nschneider
Description                     : 
Page Mode                       : UseOutlines
Page Count                      : 8
Author                          : nschneider
Subject                         : 

EXIF Metadata provided by EXIF.tools