Chuango Security Technology P900 P.I.R. Motion Detector User Manual 900 EN 1212 2 0

Download:
Mirror Download [FCC.gov]
Document ID	1882765
Application ID	7s/9F1hSAFp1YG/5qGLx1A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.98kB (87259 bits)
Date Submitted	2013-01-19 00:00:00
Date Available	2013-01-19 00:00:00
Creation Date	2012-12-19 17:17:45
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	2012-12-19 17:17:45
Document Title	900-EN-1212-2.0.cdr
Document Creator	CorelDRAW 12.0 版

Wireless PIR Motion Detector
(For Indoor Use)
PIR-900
Operation Manual
Features
LED Indication
PIR-900 is a high performance wireless P.I.R. motion detector.
It consists of digital dual-core fuzzy logic infrared control
chip and intelligent analysis which effectively identify
interference signals from body movement signals and reduce
false alarm rate. With automatic temperature compensation
and anti-air turbulence technology, it easily adapts to
environmental changes. The detector also has the advantages
of energy saving, reliability and easy installation.
Flash conti nuously: Under the self-testing state.
Flash once: Intruder is detec ted.
Flash twice: Self-testing is finished, enters the worki ng mode.
Flash once per 3 seconds: Under voltage indication, please
change the batt eries immediately.(User will get alert SMS about
the low batt er y if the PIR detec tor is connect ed to the GSM
alarm system.)
PCB Layout
FCC Statement
LED ON / OFF
AA 1.5V LR6
AA 1.5V LR6
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
Infrared sensor
Tamper switch
Appearance
Zone setting
1. Detection window
2. LED indicator
3. Bracket
Tamper switch: Once the case is opened in working state,
the tamper switch will be triggered and then generates
an alarm signal.
Infrared sensor: It detects the infrared rays released by
human body motion, please don’t touch the surface and
always keep it clean.
Usage
Open the case and remove the battery activation strip to
activate batteries. It will start self-testing for one minute.
Mode Setting
Top view
Side view
Fix the bracket on the wall with screws and attach the
detector to the bracket. Adjust installation height
or bracket to change the detection distance and angle.
It is recommended to mount it at the height of 2m from
the ground.
The detector is more sensitive to the cross movement
than to the vertical movement, so the performance of
detector is best when the detection direction is vertical
to the walking direction of people.
Test Button
Testing mode: After self-testing, press the test butt on,
the sens or enters testing mode, and dete cts once ever y
10 seconds. After 3 minute s, the LED flashes twice, and
the sens or enters the worki ng mode.
Worki ng mode: In worki ng state, if the sens or is triggered
more than twice within 3 minute s, it will enter sleepi ng
mode to save power. After no movem ent within next 3
minute s, the sens or goes back to the worki ng mode.
Connect to alarm panel : Press the connect key on the
alarm panel , and then press the test butt on of the sens or
twice to send alarm signal . When one beep is heard, they
are connect ed. To check if they are connect ed succ essfully,
arm the system, and trigger the sens or agai n, if there is an
alarming, the connect ion is succ essful.
Testing (Walk Test)
A. After installation, power on the detector. After one minute
self-testing, press the test button, walk in the scope (from
left to right or from right to left) and watch the LED
indicator to make sure the detector is working.
B. The LED indicator flashes once when body movement is
detected.
C. Adjust the detector angle accordingly to achieve the best
detection effect.
Detection Scope
0m
110°
Installation & Notices
Avoid mounting the detector close to windows, air
conditioner, heater, refrigerator, oven, sunshine and places
where the temperature changes fast or the air stream flows
frequently. If two detectors are installed in the same
detection scope, please adjust the location to avoid
interference and false alarm.
2m
4m
6m
8m
2m
0m
Top view
Side view
Specifications
Power supply
DC 3V (AA 1.5V LR6 Battery x 2 pcs)
Static current
≤ 50uA
Alarm current
≤ 9.5mA
Detection scope
8m/110°
Transmitting distance
≤ 80m (in open area)
Radio frequency
2m
315.8599MHz
Housing material ABS plastic
Operation Condition
Temperature: -10°C~55°C
Relative humidity: ≤80% (non-condensing)
Detector dimensions (L x W x H)
Ground
Bracket dimensions (L x W x H)
108 x 52 x 36.8 mm
52 x 30 x 26.5 mm
Ver: 900-EN-1212-2.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : D:20121219171745
Modify Date                     : D:20121219171745
Producer                        : Corel PDF Engine Version 1.0.0.525
Creator                         : CorelDRAW 12.0 版
Title                           : 900-EN-1212-2.0.cdr
Page Count                      : 2

EXIF Metadata provided by EXIF.tools