Chung Hsin Electric and Machinery Mfg VSS-5830P 5.8 GHz Wireless Video Server with 433.92MHz transmitter User Manual VSS 5830 1A

Download:
Mirror Download [FCC.gov]
Document ID	1006351
Application ID	2HCy9YQr/RGbpcJTzUUB+g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	167.19kB (2089901 bits)
Date Submitted	2008-09-25 00:00:00
Date Available	2008-09-25 00:00:00
Creation Date	2008-09-23 16:48:45
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-09-24 09:38:08
Document Title	Microsoft Word - VSS-5830 User Manual-1A.doc
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	TW005969

User’s Manual
for
VSS-5830
5.8GHz Wireless Video Server
Document Number： PSS08002
Page
Date
： 1
of
51
Revision ： 1A
： 2008-04-13
CHUNG-HSIN ELECTRIC & MACHINERY MFG. CORP.
URL: http://www.chemlink.com.tw/
About this document
This software quick manual is intended for user of 5.8 GHz Wireless
Video Server. The default IP setting of Wireless Video Server is
DHCP. Please refer to user manual of Wireless Video Server, if there
is not DHCP Server on your network.
IMPORTANT
Check PC specification requirements
Check OS platform requirements
Install IPSurveillance Application Software before you start
working with Wireless Video Server.
Read special notes and important configuration information.
TABLE OF CONTENTS
1. PRODUCT OVERVIEW ........................................................................................ 5
2. PRODUCT CD ......................................................................................................... 6
3. BEFORE YOU INSTALL SOFTWARE............................................................... 6
4. LANGUAGE SUPPORT......................................................................................... 6
5. HOUSING and CONNECTORS ............................................................................ 7
Front side look ....................................................................................................... 7
Back side look ........................................................................................................ 9
6. FIRST TIME USE INSTRUCTIONS (read carefully) ...................................... 11
INSTALL IPSURVEILLANCE APPLICATION SOFTWARE ......................... 11
WHICH BROWSER TO USE?............................................................................ 11
POWER ON Wireless Video Server .................................................................... 11
CONNECTING TO NETWORK ......................................................................... 11
FACTORY SETTING - INITIAL IP ADDRESS ................................................ 11
USING IPSCAN .................................................................................................. 12
CHANGE NETWORK SETTINGS BY IPSCAN ............................................... 14
7. ACCESS Wireless Video Server........................................................................... 16
BROWSER .......................................................................................................... 16
INSTALL AND RUN ACTIVEX CONTROL .................................................... 17
INITIAL USERNAME & PASSWORD.............................................................. 18
VIEWING AND OPERATTING PAGE ............................................................. 18
CONTROL PANEL SETTINGS ......................................................................... 20
8. WEB INTERFACE SETTINGS........................................................................... 21
STATUS............................................................................................................... 22
NETWORK.......................................................................................................... 23
STATIC IP.................................................................................................... 23
DYNAMIC IP .............................................................................................. 24
PPPoE SETTINGS....................................................................................... 25
VIDEO ................................................................................................................. 26
VIDEO SETTINGS ..................................................................................... 26
COLOR SETTINGS .................................................................................... 28
VIDEO PREVIEW ...................................................................................... 28
MAX CLIENT LIMIT ................................................................................. 29
EVENT RULE ..................................................................................................... 29
EVENTS HANDLED .................................................................................. 30
ACTIONS TRIGGERED............................................................................. 31
RULE LISTS - ADDING/DELETING........................................................ 31
MODIFYING RULE LISTS........................................................................ 31
CAPTURE ........................................................................................................... 32
DATE & TIME .................................................................................................... 33
OSD...................................................................................................................... 34
DWELL MODE SETUP (ATUO-SCAN MODE) ............................................... 35
PTZ CONTROL ................................................................................................... 36
PORT ................................................................................................................... 36
DDNS ................................................................................................................... 38
SMTP/FTP ........................................................................................................... 39
E-MAIL – SMTP SETTINGS ..................................................................... 39
FTP SETTINGS ........................................................................................... 40
TRIGGER SETUP ............................................................................................... 41
Digital INPUT.............................................................................................. 41
PERIODIC TIMER...................................................................................... 41
MOTION DETECTION .............................................................................. 42
Video Loss ................................................................................................... 44
PRE/POST SETTING .......................................................................................... 44
ACCOUNT .......................................................................................................... 45
SECURITY .......................................................................................................... 46
MAINTENANCE................................................................................................. 48
9. FACTORY DEFAULT.......................................................................................... 49
10. REBOOT .............................................................................................................. 49
11. LOGOUT .............................................................................................................. 49
12. USB Config Port - FIRST TIME EXPERIENCE............................................. 50
SUPPORTED OS ................................................................................................. 50
NO SOFTWARE INSTALLATION REQUIRED............................................... 50
STEPS FOR USING USB config port (Windows XP PC)................................... 51
1. PRODUCT OVERVIEW
VSS-5830 is the first 5.8GHz wireless video server. By installing a
5.8GHz transmitter in each of your analog camera, and a built-in
8-channel receiver in VSS-5830, VSS-5830 can connect up to 8
cameras wirelessly without interference from all devices operating
from 2.4GHz, such as Bluetooth and Wi-Fi. VSS-5830 also has a
built-in video server that connects to the internet, enables you to
view and record video from 8 cameras (one at a time), and set
auto-scan time freely (from 1-120 seconds) on each channel either
locally or over the internet.
Wirelessly remote control PTZ speed dome over the internet and
remote control locally features are also available with additional
purchase.
You can set up PTZ module function that show in page 36
When you finish the set up function then the screen will display
Control manu as shown page 19
2. PRODUCT CD
Product CD in the package contains the following:
IPSurveillance Application Software NVR management software
¤
16CH Live View / Recording / Playback
User Manuals
3. BEFORE YOU INSTALL SOFTWARE
PC running Microsoft Windows XP Server Pack 2 or above is only
capable of running IPSurveillance Application Software software.
PLEASE
go through
user’s manualbefore
requirements
IPSurveillance
installation to
Application
check
Software
further PC
in order to ensure smooth software operation.
4. LANGUAGE SUPPORT
ENGLISH
NOTE
IPSurveillance Application Software™ setup will auto-run when inserting
product CD. Pay attention to dialog box questions before you press OK button.
5. HOUSING and CONNECTORS
Front side look
1: miniUSB Port for configuration (for IP address setting only)
2: Channel or mode number display. This indicates mode number (Mode 1 ~ 9), if
it is flashing. Or, this indicates channel number (CH 1 ~ 8 for wireless receiver,
CH 9 for wire input), it is bright.
3: Fixed channel mode or auto-scan mode display. This indicates auto-scan mode,
if the dot display is bright. Or, this fixed channel mode, if the dot display is off.
4: Push button for changing fixed channel mode or auto-scan mode
5: Push button is for changing channel number, if it is at fixed channel mode. And,
it is for changing mode number, if it is auto-scan mode.
6: LED for System Status
7: IR Receiver
8: Power switch
Back side look
10
11
12
13
14
9: SMA connector for wireless PTZ antenna. It disappears, if wireless PTZ is not
built in this device.
10: Power Jack for 8 ~ 32 VDC input
11: RCA connector for audio left input (CH 9)
12: BNC connector for video input (CH 9)
13: RCA connector for audio left input (CH 9)
14: A/V jack for audio and video output
15
16
17
18
19
20
15: 5V DC output
16: Terminal block for digit input, if wireless PTZ is not built in this device. There
is no function, if wireless PTZ is built in this device.
17: Terminal block for digit output, if wireless PTZ is not built in this device.
There is no function, if wireless PTZ is built in this device.
18: Terminal block for RS-485, if wireless PTZ is not built in this device. There is
no function, if wireless PTZ is built in this device.
19: RJ-45 connector for Ethernet
20: SMA connector for 5.8 GHz antenna
10
6. FIRST TIME USE INSTRUCTIONS (read carefully)
INSTALL IPSURVEILLANCE APPLICATION SOFTWARE
Install IPSurveillance Application Software. IPScan is a software
utility to find your wireless video server on the network. It is a part
of IPSurveillance Application Software.
WHICH BROWSER TO USE?
We strongly recommend Microsoft IE browser version 6 or higher.
Mozilla Firefox and similar others are not guaranteed to work
with Wireless Video Server.
POWER ON Wireless Video Server
Power on video server by using power adapter provided in the product
package. Connect power adapter to AC socket.
CONNECTING TO NETWORK
Connect a standard CAT5 Ethernet cable to R45 socket on Wireless Video
Server and connect other end to your network hub/switch. Make sure
the PC you want to access Wireless Video Server is on the same network
domain which has DHCP server.
FACTORY SETTING - INITIAL IP ADDRESS
IP Address: DHCP
11
USING IPSCAN
IPScan software is the quickest way to make sure we can find
Wireless Video Server on your network. IPSurveillance
Application Software setup will install two applications. You can
see as shown below.
Select IPScan. The following window appears after you select “IPScan”
from start menu.
Press Scan button to list the IP and MAC address table. To refresh,
press Clear Table and press Scan again.
You will find the list of IP and MAC address listed. To identify your
Wireless Video Server you can check the label for MAC address.
To quit IPScan anytime, click Exit.
12
Double right click
If you want to quickly open the IP you see on IPScan on your browser,
select an IP and do a “double right click” on your
mouse/touchpad. You can see the browser window open that IP.
13
CHANGE NETWORK SETTINGS BY IPSCAN
The IP address is 169.254.100.100, if there is no DHCP
server on your network.
Double click to change network setting.
You can double click a specific IP address and change some basic network
parameters. A dialog box will appear as follows.
Change any settings you want to make and make sure you have correct
values in all fields. Click Apply.
Within 10 seconds, the dialog box should disappear to indicate new
14
settings are accepted and being applied. Wait for around 30 seconds,
before trying to refresh IP list. Click Clear Table and click scan again.
You should be able to find MAC address of video server under new IP
address. Wireless Video Server is online on your network. Use ping
command from Windows command prompt to double check if IP is
reachable.
To quit IPScan anytime, click Exit.
15
7. ACCESS Wireless Video Server
BROWSER
Double right click
Or,
Open IE browser
Type IP address of video server that you found on IPScan software.
For example, http://192.168.10.151/
Initial username and password are…
ID: root
Password: pass
Click Login button to go to web view.
16
INSTALL AND RUN ACTIVEX CONTROL
After successful log in, the following pages will appear at first time.
Click Install button to install ActiveX Control
Click Run button to run this ActiveX Control
17
INITIAL USERNAME & PASSWORD
Administrator
¤
Default ID/Password = root/pass.
¤
Only password is changeable.
¤
Full access right to view, control system settings.
Guest accounts
¤
ID/Password not necessary.
¤
Basic view and some action buttons can work.
VIEWING AND OPERATTING PAGE
After successful log in as Guest, the viewing page will appear as follows.
The “camera info” button when clicked shows FPS, camera name and
resolution values.
Guest Mode Viewer
18
When you log in successfully with ROOT/PASS as administrator, the
viewer screen will display as shown below.
Viewing Area
1.
Notice
top right
Operating Area
corner
of
viewing page
has a toggle button to
take you between web configuration page & viewing page. Always
click that if you want to move from one page to the other.
2.
Several controls options are available on the right side.
3.
OSD
is
displayed
on
top
left
corner
of
the
screen
(time, date, camera name)
Live recording : record live stream to local HDD
Snapshot
19
CONTROL PANEL SETTINGS
¤
Video/Resolution
Following table describes resolution values for each video format
¤
Resolution
CIF
QCIF
D1
NTSC
352X240
704X480
720X480
PAL
352X288
704X576
720X576
Video \ Bit rates
f Choose a particular value and it is applied within
few
seconds.
Video
on
the
screen
will
pause briefly.
32K/64K/128K/256K/384K/500K/750K/1M/1.5M
/2M/3M (bps)
¤
Audio \ Enable check box
f Enable or disable function for audio will result in
video flicker for a second and then return back to
normal. This is not an error.
¤
P/T/Z controls (will need PTZ controller)
f Z (Zoom): zoom in (+) / zoom out (-).
f Pan/Tilt.
f F (Focus): focus in (+) / focus out (-).
20
¤
Select channel number in fixed channel mode.
The mode is fixed channel mode, if Dwell is
unchecked. Channel number 1 ~ 9 could be
selected.
¤
Select mode number in auto-scan mode.
The mode is auto-scan mode, if Dwell is
checked. Mode number 1 ~ 9 could be selected.
¤
Camera Information.
Shows video information of the transferred data
on the upper left corner of the video screen such
as frame rate (fps), channel name, resolution.
FPS Name Resolution
¤
Digital Output
f When enabled, DO provide contact close
and acts purely as a switch.
8. WEB INTERFACE SETTINGS
Wireless Video Server built-in web interface offers more advanced
settings. On the main viewing page, click icon located on top-right side to
enter server settings page. It is a toggle button to switch between Config
and viewer pages.
21
STATUS
¤
Initial view of web Config interface is status page.
¤
Hardware & Firmware information along with network status such as
current IP and related details are clearly shown.
¤
on CCD IP CAMERAW and CMOS IP CAMERAW model
NOTE
Remember to press “OK” after you have changed settings in a particular settings page
which has “OK” button. After few seconds, you can see a confirmation dialog box
informing that settings have been updated. Pressing OK will return to the same page.
22
NETWORK
Three configuration types are available for wired network connection
STATIC, DYNAMIC & PPPoE.
STATIC IP
¤
IP Address
f Confirm with network administrator.
¤
Subnet Mask/Gateway/Default DNS
f Confirm with network administrator.
¤
¤
Always click “OK” to save changes in a particular page.
Reboot is required and will be automatically triggered after you
press “OK”. Wait for count down timer to finish and page
will refresh automatically and you should see initial login page.
Note:
Always use IPScan to find the MAC address after reboot and double check the IP
23
address is correct. If IP was changed in web configuration, you cannot return to
initial login page after reboot.
DYNAMIC IP
¤
IP
If DHCP server is on LAN and you want to allocate Dynamic
address, use DHCP.
¤
¤
Click “OK” button.
Reboot is required and will be automatically triggered after you
press “OK”. Wait for count down timer to finish and page
will refresh automatically and you should see initial login page.
Note:
Always use IPScan to find the MAC address after reboot and double check the IP
address is correct. If IP was changed in web configuration, you cannot return to
initial login page after reboot.
24
PPPoE SETTINGS
¤
PPPoE is used in case network supports PPPoE like xDSL
¤
Request Internet Service Provider for PPPoE ID/Password
¤
User ID / Password
f PPPoE user ID / Password
¤
Service Name
f Service name of ISP
¤
MTU
f Maximum transmission unit of data
¤
IP address of DNS sever can be set to be created automatically.
¤
If xDSL does not use static IP, you should use DHCP.
25
VIDEO
VIDEO SETTINGS
Video Compression Type
¤
f MJEPG / MPEG4
Resolution
¤
f QCIF / CIF / D1
Frame Types
¤
This setting deals with the Group of Pictures (GOP) structure - which
could be a combination of I and P frames.
I frames - also referred to as Key frames contain
information for a complete picture, and can be decoded independent
of any other frame. I
least
frames
compressed)
are
frames.
the
largest (and
Therefore
for
same
quality, they consume high bit rate.
26
P - P frames are encoded using information from the previous I or P
frame, and can only be decoded correctly if the previous I / P frame
is available. P frames are smaller than I frames.
f I Only / IP Only
f IP - Simple Profile - Medium bit rates for same quality.
I - Highest bit rates for same quality.
**When choosing MJEPG streaming, ONLY support “I Only”
mode
¤
Bit rate Type
f Constant and Variable bit rates control allows flexibility in
choosing how much bandwidth is available on network and
quality of video required.
¤
Constant Bit rates
f 3M / 2M / 1.5M / 1M / 750K / 500K / 384K / 256K / 128K / 64K
/ 32K
¤
Variable Bit rates
f 2 ~ 31 (quality is best in case value is “3”)
¤
Frame per Second.
f 1 ~ 30
¤
Group Size
f Adjusts the ration between “I” frames and “P” frames. Lower
the group size, better the quality.
f 5 / 10/ 15 / 30 / 60
¤
Video Type
f NTSC / PAL
**System can automatically detect input video signal when clicking “detect” icon
27
COLOR SETTINGS
Fine adjustments to video quality can be made using more detailed
settings as shown below.
BRIGHTNESS
Adjusts the image on a scale from darkness to brightness.
CONTRAST
Adjusts the extent to which adjacent areas on a video differ in
brightness
SATURATION
Adjusts the chromatic purity of video thereby effecting vividness.
HUE
Adjusts the video by effecting color depth
VIDEO PREVIEW
Preview makes choices easier when tuning video settings for specific
locations. By clicking the View Video button, you can see the following
28
Click Stop to exit preview. You could change other video parameters
and press TEST to see how the changes look like. You can press Reset
anytime to return back to the default settings. Click Enable Preview
checkbox to save the current settings – and its takes effect right after
settings have been changed.
MAX CLIENT LIMIT
Maximum users (client) limit allows users accessing the video stream.
For higher bit rates and resolution, the client limit is much lower and
vice versa.
¤
Maximum number of clients can be restricted depending on how
much video quality is required and network band with is available.
f 0 ~ 10 (value 0 means maximum allowable)
DO
NOT
FORGET
TO
PRESS
“OK”
BUTTON
TO
SAVE
YOUR SETTINGS.
EVENT RULE
1. Digit Input
2. Motion Detection
3. Periodic Timer
4. Network Loss
5. Video Loss
6. Power Loss
29
Digital
PTZ
Email
Output
Preset
Notification
Record
to FTP
Server
Digital Input
Motion Detection
Periodic Timer
Network Loss
Video Loss
Power Loss
EVENTS HANDLED
Digital Input
Can choose sensor type either “Normal Open” or “Normal Close”
Motion Detection
If motion is detected on the areas defined on the video stream, an event
will be triggered based on the rule lists.
Periodic Timer
30
In a pre-defined time interval, an event will be triggered based on the rule
lists.
Network Loss
When system detect network loss, an event will be triggered
Video Loss
When system detect video loss, an event will be triggered
Power Loss
When system detect power loss, an event will be triggered
ACTIONS TRIGGERED
Digital Output
Can active digital output.
PTZ Preset
PTZ set to a particular preset value can be triggered based on occurrence
of an event listed out in “Rule Lists”.
E-mail Notification
E-mail can be sent based on occurrence of an event listed out in “Rule
Lists”.
Record to FTP server
When event triggered, system will record streaming to FTP server.
RULE LISTS - ADDING/DELETING
Select an event and select corresponding action. Click add button and
notice that is added in the Rule lists Information box.
MODIFYING RULE LISTS
Rule list items can be deleted individually or wholly by clicking Delete All
button.
31
CAPTURE
Choose
Enable
checkbox
to
record
snapshot
by
schedule
or
event triggered way.
Schedule capture
Select schedule day check boxes (can multi-select)
Define start and end time
Choose output type as “FTP upload”
Define related output parameter, such as interval time,
save path …
32
DATE & TIME
¤
Date and time settings can be synchronized with PC directly by
clicking “Client PC time” check box. Click “OK” after you have made
selection.
¤
Time zone can be chosen by choosing either of the two time servers
listed
¤
Either of the two time servers can be chosen to synchronize video
server time. They are listed as follows should you choose Time
Server. Click “OK” after you have changed settings.
¤
If you want to manually input time server, choose “Other” then you
can find a manual input edit box appear. Key in your preferred time
33
server and click “OK”.
OSD
Click on your desired choice of color. Values will change accordingly for R,
G, and B. If you desire some other color, you can manually define those
corresponding R, G, B values in the boxes as appropriate. Position of OSD
can
be
changed
by
defining
the
X,
values.
Date
Time
can be individually enabled/disable by “Date” & “Time” checkboxes.
Channel name can be shown/hidden by the channel name “Enable”
checkbox. It can be manually typed in the “Channel name” text box and
changes can be noticed.
34
DWELL MODE SETUP (ATUO-SCAN MODE)
The setting values of mode of auto-scan mode can be changed by “Set”
button.
Mode 1 to 9 could be support in auto-scan. And, dwell time 1 to 120
seconds of each channel could be set. The channel number is removed
from auto-scan model, if dwell time is set to 0 sec.
35
PTZ CONTROL
¤
Channel Mode (PTZ model)
f Default is none.
f PelcoP/ PelcoD/ Transparent can be chosen.
¤
Channel ID
f Give address value for channel 1 to 9.
¤
Baud rate / Data bits / Parity / Stop bits
f Depending on the protocol used, the values of baud and related
settings are to be assigned accordingly.
PORT
The values of WEB and AV port can be changed as necessary.
36
Web
¤
Web Port default is 80
Video + Audio
¤
Default is 1852 for video/audio data transmission.
37
DDNS
DDNS is the function that maps an IP address to a host name.
If
Wireless Video Server are set to dynamic IP address, the host name by
DDNS (Dynamic Domain Name Service) must be used instead of the IP
address for credibility of network connection.
IPv4 DDNS
¤
Check “Enable” and select a service out of available two.
¤
Both services are required to register some items on each DDNS
service site.
¤
For use of “ddns.nu” register at www.ddns.nu and for dyndns find
the information at dyndns.org
38
SMTP/FTP
An e-mail notification & FTP upload service offered by Wireless Video
Server notifies events or uploads snapshots to a remote FTP server.
E-MAIL – SMTP SETTINGS
Fill in the details of SMTP server such as port number, user name,
password, server name information. If you would wish to send attached
snapshots, please check the appropriate check box.
Sometimes Authentication is not always required by SMTP servers.
Wherein only the SMTP server name and e-mail address details are
enough to be input.
39
FTP SETTINGS
Fill in the details of remote FTP server, port number and user name,
password.
40
TRIGGER SETUP
Three different types of EVENTS can be configured.
Digital INPUT
Can be Normal OPEN (N.O) or Normal Close (N.C)
Choose based on the type of input and press OK to save the settings.
PERIODIC TIMER
Timer interval can be set in terms of seconds. This will trigger an event
when the time out is achieved.
41
MOTION DETECTION
¤
Enable type
f Can enable motion detection by “always” or “schedule” mode
f When
choosing
schedule
mode,
define
schedule
day
and start/end time
¤
Detection Area
f Total viewing screen area is divided into 9 square blocks and
each of them is called area 1, area 2 etc., Click specific areas
you want motion detection to be enabled. If a detection area is
selected color changes to dark gray.
42
¤
Sensitivity value
f Defines sensitivity of the motion detection. The range of the
value is 1 to 100.
¤
Motion Vector value
f To detect even slightest movement for objects in selected area,
please select a lower motion vector value. The range of the
value is 3750 to 4650.
¤
SAD value.
f To only detect flashing light or any such significant activities on
immovable objects, low SAD value should be chosen. In most
cases, high SAD level is recommended. The range of the value
is 20 to 150.
Motion detection enabled areas look as shown below. A simple click can
select any of the boxes on detect area.
43
Video Loss
Can config how much time system should trigger an event for video loss
PRE/POST SETTING
These parameters decide Pre/Post buffer stream format type and duration.
Administrator can choose format as “AVI Video” or “JPEG Picture” with
Pre/Post time duration
44
ACCOUNT
Administrator can create user accounts. Login as an administrator and
create user accounts by pressing “Add”. Each account has PTZ, Video
settings and Digital Out privileges. They can be turned on or off anytime
by the administrator.
There are limits on user name and password length and will be notified by
dialog boxes if the user name/password exceeds or under-runs that limit.
For each account, guest permissions can be turned ON/OFF. Any time, an
account’s settings can be modified by pressing the “Modify” button.
45
Administrator account password can also be modified by “Password”
button. Changing password needs confirmation.
Account Limitations
¤
Administrator can add up to a maximum of 5 users and
assign properties for each of them.
Guest Permissions
¤
Guest account can be turned ON/OFF anytime.
SECURITY
The basic settings are LOW by default.
46
¤
Security Level
f HIGH
m ONLY LAN connections are allowed.
f MEDIUM
m Video
and
audio
connections
from
any
location
and settings from LAN are permitted.
f LOW
m All connections from any location are permitted.
¤
Power LED
f Turn On
m Default
value,
power
LED
will
always
be
on
during operation.
f Turn Off
m Config power LED as off during operation.
47
MAINTENANCE
Language
•
Default settings are in English. A choice of Traditional Chinese is
available.
Firmware update
•
Firmware update binary file can be obtained your reseller. Choose
that and click upload. When uploading is done, reboot is required
and will be automatically triggered.
CAUTION
DO NOT power off during upgrade process, follow system dialog to finish upgrade
procedure
System Configuration (Backup/Restore)
•
You can backup current configuration profile as a file and restore
any stored configuration profile.
48
9. FACTORY DEFAULT
After a confirmation dialog box, clicking OK button, will load default settings
and do a reboot. You will see the reboot countdown timer running. Once
done, you will see the login page. Please login with root/pass.
10. REBOOT
If you click OK on the dialog box, you will see the reboot countdown timer
running. Once done, you will see the login page. Please login with root/pass
or other appropriate login information.
11. LOGOUT
To return to the login screen, simply click logout. You should see yourself in
the login page within seconds.
49
12. USB Config Port - FIRST TIME EXPERIENCE
If Wireless Video Server has to be quickly configured or has to be set to
factory default settings, USB config port is used to achieve that. USB config
port is a special USB port.
Insert mini USB cable onto USB config port and connect other end to PC.
When video server is powered on, such port will not be operational. Once
you are done working with USB config port, remember to unplug USB cable
from USB config port.
NOTE
REMOVE USB CABLE WHEN YOU ARE FINISHED WITH QUICK CONFIGURATION.
SUPPORTED OS
PC running the following operating systems can support auto run of Quick
Config application.
1. Windows Vista - auto run.
2. Windows XP - auto run.
NO SOFTWARE INSTALLATION REQUIRED
There is no installation or setup of any software for Windows
Vista/XP
platforms.
50
STEPS FOR USING USB config port (Windows XP PC)
1.
Disconnect power cable connected to Wireless Video Server.
2.
Use mini-USB cable and connect appropriate end to USB config port
and connect other end to PC USB port.
3.
After 5 ~ 10 seconds depending on how fast your PC is, you can
notice “Disk drive” being detected.
4.
A POP-UP dialog shows “Config Wizard” is ready to run. Press OK.
Double click Config Wizard. You will see a screen as follows.
51
You will be asked for password. Earlier, if you have never changed the
password for user root, please type pass as the password. Then click
login button. If you input wrong password, you will get this dialog box.
You will see the network status of Wireless Video Server .To navigate
through Quick Wizard, click it and you will find a window appear as below.
52
If you would wish to change network settings of either
STATIC / DHCP / PPPoE
If you would want to setup DDNS, please click on the same for detailed
configuration.
Return to Network page to setup network further.
Please choose and click next for detailed configuration page. For
instance, shown below is a screen which has STATIC network
configuration page. Click next to proceed.
53
Please input web port and stream port if default value does not match
your requirement
Clicking next will show that settings are saved. You can click finish if you
are done or go back or change other settings. Similarly you can change
other settings at ease.
Note:
f Connect CCD IP CAMERA/CMOS IP CAMERA to your network by using a
standard
Cat-5 cable.
54

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2008:09:24 09:38:08+08:00
Create Date                     : 2008:09:23 16:48:45+08:00
Comments                        : 文件由 Solid Converter PDF Professional 建立
Company                         : chem
Source Modified                 : D:20080923084342
Page Count                      : 54
About                           : uuid:0d6e1219-b8d7-4b69-8821-376dd92fe998
Producer                        : Acrobat Distiller 6.0 (Windows)
Creation Date                   : 2008:09:23 16:48:45+08:00
Mod Date                        : 2008:09:24 09:38:08+08:00
Author                          : TW005969
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Metadata Date                   : 2008:09:24 09:38:08+08:00
Keywords                        : 
Document ID                     : uuid:c58d2b83-d17d-451b-a195-ef555176d736
Version ID                      : 4
Format                          : application/pdf
Title                           : Microsoft Word - VSS-5830 User Manual-1A.doc
Creator                         : TW005969
Subject                         : 
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools