Cisco Systems 102094 Aironet 802.11ac User Manual ant2566d4m Copy

Download:
Mirror Download [FCC.gov]
Document ID	2748984
Application ID	HLa7js3MVznrQnzcQIhEaA==
Document Description	Installation Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.16kB (676994 bits)
Date Submitted	2015-09-15 00:00:00
Date Available	2015-09-25 00:00:00
Creation Date	2013-07-30 05:40:03
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2015-03-11 20:19:06
Document Title	ant2566d4m - Copy.fm
Document Creator	FrameMaker 11.0.2
Document Author:	matharay

Ea rly Beta Draft Only
Cisco Aironet Hyperlocation Module
(AIR-ANT-LOC-01=) Installation Guide
First Published: March 11, 2015
This document outlines the specifications for the Cisco Aironet Hyperlocation Module
(AIR-ANT-LOC-01=) and provides instructions for mounting it.
The following information is provided in this document.
•
System Overview, page 2
•
System Requirements, page 3
•
Safety Precautions, page 4
•
Installation Notes, page 5
•
Installing the Modules, page 3
•
Obtaining Documentation and Submitting a Service Request, page 6
Cisco Systems, Inc.
www.cisco.com
System Overview
Early Beta Draft Only
System Overview
The Hyperlocation module is a 32 element antenna design that provides 360 degree coverage around
supported access points — currently the 3600 and 3700 series APs. It is designed to integrate into the
Cisco Aironet Wireless Security and Location Module (RM3010L) providing precise RF Angle of
Arrival (AoA) information allowing the operating system a much more granular approach to the location
of a client device.
The hyperlocation module along with RM3010L helps in providing a location accuracy of less than a
meter for a wireless clients, using WiFi and Bluetooth technology.
The module operates in both the 2.4-GHz and 5-GHz frequency ranges and is designed for indoor use.
Together with the Hyperlocation module, the Wireless Security and Location Module is fully capable of
providing the following monitoring and security services:
•
RRM
•
CleanAir
•
wIDS/wIPS
•
Rogue Detection
•
Context Aware – Location
•
802.11ac capability @ 20, 40 and 80 MHz operation
•
Integrated Bluetooth Low Energy “BLE” Beacon capability
•
External DART connector for location capability with the use of the Hyper-Location module
(antenna array)
Cisco Aironet Hyperlocation Module (AIR-ANT-LOC-01=) Installation Guide
System Requirements
Early Beta Draft Only
System Requirements
This hyperlocation module is designed for indoor use with Cisco Aironet 3600 and 3700 access point
along with the Cisco Aironet Wireless Security and Location module (AIR-RM3010L-UXK9=).
Installing the Modules
Tools and Equipment Required
No specialized tools are required for installing the modules.
Mounting the modules
Step 1
Remove the modules from the packaging.
Step 2
Power down the access point.
Note
Figure 1
If you install a module while the AP is powered on, the AP will reboot.
Step 3
Unmount the access point, in the reverse order of installing it.
Step 4
Position the hyperlocation module around the AP as shown in Figure 1. Note that the arrow on the
module and the face of the AP with the logo and LED should be aligned as shown in Figure 1.
Positioning the hyperlocation module around the AP
Arrow on hyperlocation module
Face of the AP
Hyperlocation module
The position of the LED and the logo on the face of the
AP.
Cisco Aironet Hyperlocation Module (AIR-ANT-LOC-01=) Installation Guide
Installing the Modules
Early Beta Draft Only
Step 5
Peel off the Module Port Protective Cover from the back of the access point to reveal the module port
connector, labeled 2 in the following figure.
The PCIe connector on the wireless security and location module will go into the AP’s module port
connector.
345379
Step 6
Openings for module’s antennas
Removable Module Port Protective Cover
Align the PCIe connector with the module port connector on the back of the access point and click the
module down into place. Press firmly on the center of the module to properly seat the PCIe connector
into the AP’s module port connector.
Cisco Aironet Hyperlocation Module (AIR-ANT-LOC-01=) Installation Guide
Installing the Modules
Early Beta Draft Only
Figure 2
Installing the Wireless Security and Location Module
Step 7
Caution
Step 8
Screw down the thumb screws on the module, by hand only.
Hand tighten each screw until the resistance is obvious and you know you cannot further tighten the
screws.
Do not use any mechanical tool or device such as pliers or a torque wrench to tighten the screws.
Plug in the DART connector of the hyperlocation module in to the DART port on the wireless security
and location module. The final assembly is as shown in Figure 3.
Cisco Aironet Hyperlocation Module (AIR-ANT-LOC-01=) Installation Guide
Obtaining Documentation and Submitting a Service Request
Early Beta Draft Only
Figure 3
View of the final assembly
Hyperlocation Module
Step 9
Wireless Security and Location Module
Power up the access point.
When the access point boots up, it detects the modules.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a
service request, and gathering additional information, see What’s New in Cisco Product Documentation
at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised
Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a
reader application. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2015 Cisco Systems, Inc. All rights reserved.
Cisco Aironet Hyperlocation Module (AIR-ANT-LOC-01=) Installation Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Creator Tool                    : FrameMaker 11.0.2
Modify Date                     : 2015:03:11 20:19:06+05:30
Create Date                     : 2013:07:30 05:40:03Z
Metadata Date                   : 2015:03:11 20:19:06+05:30
Format                          : application/pdf
Title                           : ant2566d4m - Copy.fm
Creator                         : matharay
Document ID                     : uuid:52ecb686-b79a-4986-8ea8-158326b456c6
Instance ID                     : uuid:206454ee-26a1-4999-bc87-306142bd4b50
Page Mode                       : UseOutlines
Page Count                      : 6
Author                          : matharay

EXIF Metadata provided by EXIF.tools