Cisco Systems 7926G0356 802.11 a/b/g & Bluetooth Phone with IR Scanner User Manual 2
Cisco Systems Inc 802.11 a/b/g & Bluetooth Phone with IR Scanner 2
Contents
- 1. User Manual 1
- 2. User Manual 2
User Manual 2
Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco Ironport, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect , Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flip Video, Flip Video (Design), Flipshare (Design), Flip Ultra, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Store, and Flip Gift Card are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0907R) Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals ©2009 Cisco Systems, Inc. All rights reserved. C O N T E N T S Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals 1 Translated Safety Warnings Statement 1071—Warning Definition Statement 331—Power Supply Installation Warning Statement 341—Metal Contacts on the Battery 14 16 Statement 361—VoIP and Emergency Calling Services Do Not Function if Power Fails 18 Statement 1001—Work During Lightning Activity Statement 1004—Installation Instructions Statement 1015—Battery Handling 22 24 26 Statement 1019—Main Disconnecting Device for the Battery Charger 29 Statement 1040—Product Disposal 31 Statement 1045—Short-circuit Protection for the Battery Charger Statement 1074—Comply with Local and National Electrical Codes 38 34 Explosive Gas Warning Battery Disposal 41 41 Japanese Electric Appliance and Radio Laws 42 Statement 371—Power Cable and AC Adapter Statement 372—Wireless LAN Products Battery Safety Notices 42 Safety Guidelines 45 European Directives 42 42 46 Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein 46 Declaration of Conformity with Regard to the EU Directive 93/42/ECC 51 CE Marking 52 National Restrictions 52 California Perchlorate Contamination Prevention Act Standards Compliance SAR Statement 55 59 55 RF Exposure Information 60 General RF Exposure Compliance 63 RF Exposure Statement for Canada 63 RF Exposure Statement for the European Union FCC Safety Compliance Statement 64 64 Manufacturer’s FCC Declaration of Conformity Statement Compliance Statement for Brazil 67 Compliance Statement for Canada 68 Compliance Statements for New Zealand 69 Permit to Connect (PTC) General Warning Use of IP Networks with the PSTN 69 70 The Use of Voice Compression through the PSTN Echo cancellation 70 71 Compliance Statement for Taiwan EMC Class A Notices and Warnings 71 72 Statement 191—VCCI Class A Warning for Japan Statement 256—Class A Warning for Hungary 74 73 65 Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets 75 Statement 294—Class A Warning for Korea 75 Statement 340—Class A Warning for CISPR22 EMC Class B Notices and Warnings 76 79 Statement 157—VCCI Compliance for Class B Equipment Statement 295—Class B Notice for Korea Using External Devices 81 Related Documentation 82 80 Obtaining Documentation and Submitting a Service Request Cisco Product Security Overview 83 79 82 Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals This document provides international agency compliance, safety, and statutory information for the Cisco Unified Wireless IP Phone 7920 Series, desktop chargers, and multi-charger peripheral devices. Read this document before installing or servicing the Cisco Unified Wireless IP Phone 7920 Series and peripheral devices. Translated Safety Warnings This section includes translations of the warnings in multiple languages. Statement 1071—Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number Regulatory Compliance and Safety Information provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET OL-19076-01 Attention IMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli Regulatory Compliance and Safety Information relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES OL-19076-01 ¡Advertencia! INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES Varning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Regulatory Compliance and Safety Information 6 OL-19076-01 Regulatory Compliance and Safety Information 8 OL-19076-01 Regulatory Compliance and Safety Information 10 OL-19076-01 Regulatory Compliance and Safety Information 11 12 OL-19076-01 Regulatory Compliance and Safety Information 13 Statement 331—Power Supply Installation Warning Warning 14 The power supply must be placed indoors. Statement 331 OL-19076-01 Waarschuwing De stroomtoevoer moet binnen worden geplaatst. Varoitus Tehonlähde on sijoitettava sisätiloihin. Attention Le bloc d’alimentation électrique doit être placé à l’intérieur. Warnung Die Stromversorgungsquelle darf nicht im Freien aufgestellt werden. Avvertenza L’alimentatore deve essere posto in un luogo interno. Advarsel Strømkilden skal være plassert innendørs. Aviso A fonte de alimentação deve ser instalada no interior. ¡Advertencia! El suministro de energía debe estar ubicado en un lugar cubierto y no al aire libre. Varning! Strömkällan måste vara placerad inomhus. Regulatory Compliance and Safety Information 15 Statement 341—Metal Contacts on the Battery Warning Do not touch or bridge the metal contacts on the battery. Unintentional discharge of the batteries can cause serious burns. Statement 341 Waarschuwing Raak de metalen contacten op de batterij niet aan en verbind ze niet met elkaar. Het onopzettelijk ontladen van de batterijen kan ernstige brandwonden veroorzaken. Varoitus Älä koske akun metallisiin kosketuspintoihin tai oikosulje niitä. Akkujen purkaminen vahingossa voi aiheuttaa vakavia palovammoja. Attention Ne pas toucher ou ponter les contacts métalliques de la pile. Une décharge non intentionnelle des piles peut entraîner des brûlures sévères. Warnung Berühren oder verbinden Sie die Metallkontakte der Batterie nicht. Eine unbeabsichtigte Entladung kann zu ernsthaften Verbrennungen führen. Avvertenza Non toccare o cortocircuitare i contatti metallici sulla batteria. La scarica accidentale delle batterie può provocare serie bruciature. Advarsel Metallkontaktene på batteriet må ikke røres eller sammenkobles. Utilsiktet utlading av batteriene kan føre til alvorlige brannskader. Aviso Não toque nem estabeleça ligação entre os contactos metálicos da bateria. A descarga acidental das baterias pode causar queimaduras graves. 16 OL-19076-01 ¡Advertencia! No tocar los contactos de metal de la batería, ni hacer puente con ellos. La descarga accidental de las baterías puede provocar quemaduras graves. Varning! Vidrör inte och förbikoppla inte batteriets metallkontakter. Oavsiktlig urladdning av batterierna kan orsaka allvarliga brännskador. Regulatory Compliance and Safety Information 17 Statement 361—VoIP and Emergency Calling Services Do Not Function if Power Fails Warning Voice over IP (VoIP) service and the emergency calling service do not function if power fails or is disrupted. After power is restored, you might have to reset or reconfigure equipment to regain access to VoIP and the emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your country. Statement 361 Waarschuwing Voice over IP (VoIP)-service en de service voor noodoproepen werken niet indien er een stroomstoring is. Nadat de stroomtoevoer is hersteld, dient u wellicht de configuratie van uw apparatuur opnieuw in te stellen om opnieuw toegang te krijgen tot VoIP en de noodoproepen. In de VS is het nummer voor noodoproepen 911. U dient u zelf op de hoogte te stellen van het nummer voor noodoproepen in uw land. Varoitus Voice over IP (VoIP) -palvelu ja hätäpuhelupalvelu eivät toimi, jos virta katkeaa tai sen syötössä esiintyy häiriöitä. Kun virransyöttö on taas normaali, sinun täytyy mahdollisesti asettaa tai määrittää laitteisto uudelleen, jotta voisit jälleen käyttää VoIP-palvelua ja hätäpuhelupalvelua. Yhdysvalloissa hätänumero on 911. Selvitä, mikä on omassa kotimaassasi käytössä oleva hätänumero. Attention Le service Voice over IP (VoIP) et le service d’appels d’urgence ne fonctionnent pas en cas de panne de courant. Une fois que le courant est rétabli, vous devrez peut-être réinitialiser ou reconfigurer le 18 OL-19076-01 système pour accéder de nouveau au service VoIP et à celui des appels d’urgence. Aux États-Unis, le numéro des services d’urgence est le 911. Vous devez connaître le numéro d’appel d'urgence en vigueur dans votre pays. Warnung Bei einem Stromausfall oder eingeschränkter Stromversorgung funktionieren VoIP-Dienst und Notruf nicht. Sobald die Stromversorgung wieder hergestellt ist, müssen Sie möglicherweise die Geräte zurücksetzen oder neu konfigurieren, um den Zugang zu VoIP und Notruf wieder herzustellen. Die Notrufnummer in den USA lautet 911. Wählen Sie im Notfall die für Ihr Land vorgesehene Notrufnummer. Avvertenza Il servizio Voice over IP (VoIP) e il servizio per le chiamate di emergenza non funzionano in caso di interruzione dell'alimentazione. Ristabilita l'alimentazione, potrebbe essere necessario reimpostare o riconfigurare l'attrezzatura per ottenere nuovamente l'accesso al servizio VoIP e al servizio per le chiamate di emergenza. Negli Stati Uniti, il numero di emergenza è 911. Si consiglia di individuare il numero di emergenza del proprio Paese. Advarsel Tjenesten Voice over IP (VoIP) og nødanropstjenesten fungerer ikke ved strømbrudd. Etter at strømmen har kommet tilbake, må du kanskje nullstille eller konfigurere utstyret på nytt for å få tilgang til VoIP og nødanropstjenesten. I USA er dette nødnummeret 911. Du må vite hva nødnummeret er i ditt land. Aviso O serviço Voice over IP (VoIP) e o serviço de chamadas de emergência não funcionam se houver um corte de energia. Depois do fornecimento de energia ser restabelecido, poderá ser necessário reiniciar ou Regulatory Compliance and Safety Information 19 reconfigurar o equipamento para voltar a utilizar os serviços VoIP ou chamadas de emergência. Nos EUA, o número de emergência é o 911. É importante que saiba qual o número de emergência no seu país. ¡Advertencia! El servicio de voz sobre IP (VoIP) y el de llamadas de emergencia no funcionan si se interrumpe el suministro de energía. Tras recuperar el suministro es posible que deba que restablecer o volver a configurar el equipo para tener acceso a los servicios de VoIP y de llamadas de emergencia. En Estados Unidos el número de emergencia es el 911. Asegúrese de obtener el número de emergencia en su país. Varning! 20 Tjänsten Voice over IP (VoIP) och larmnummertjänsten fungerar inte vid strömavbrott. Efter att strömmen kommit tillbaka måste du kanske återställa eller konfigurera om utrustningen för att få tillgång till VoIP och larmnummertjänsten. I USA är det här larmnumret 911. Du bör ta reda på det larmnummer som gäller i ditt land. OL-19076-01 Regulatory Compliance and Safety Information 21 Statement 1001—Work During Lightning Activity Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. Varoitus Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmalla. Attention Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage. Warnung Arbeiten Sie nicht am System und schließen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert. Avvertenza Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini. Advarsel Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner. Aviso Não trabalhe no sistema ou ligue e desligue cabos durante períodos de mau tempo (trovoada). ¡Advertencia! No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera. Varning! 22 Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar. OL-19076-01 Regulatory Compliance and Safety Information 23 Statement 1004—Installation Instructions Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Waarschuwing Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit. Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore. Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden. Aviso Leia as instruções de instalação antes de ligar o sistema à fonte de energia. 24 OL-19076-01 ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Varning! Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten. Regulatory Compliance and Safety Information 25 Statement 1015—Battery Handling Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015 Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat door de fabrikant aanbevolen is. Gebruikte batterijen dienen overeenkomstig fabrieksvoorschriften weggeworpen te worden. 26 OL-19076-01 Varoitus Räjähdyksen vaara, jos akku on vaihdettu väärään akkuun. Käytä vaihtamiseen ainoastaan saman- tai vastaavantyyppistä akkua, joka on valmistajan suosittelema. Hävitä käytetyt akut valmistajan ohjeiden mukaan. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant. Jeter les piles usagées conformément aux instructions du fabricant. Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Avvertenza Pericolo di esplosione se la batteria non è installata correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore. Advarsel Det kan være fare for eksplosjon hvis batteriet skiftes på feil måte. Skift kun med samme eller tilsvarende type som er anbefalt av produsenten. Kasser brukte batterier i henhold til produsentens instruksjoner. Aviso Existe perigo de explosão se a bateria for substituída incorrectamente. Substitua a bateria por uma bateria igual ou de um tipo equivalente recomendado pelo fabricante. Destrua as baterias usadas conforme as instruções do fabricante. Regulatory Compliance and Safety Information 27 ¡Advertencia! Existe peligro de explosión si la batería se reemplaza de manera incorrecta. Reemplazar la batería exclusivamente con el mismo tipo o el equivalente recomendado por el fabricante. Desechar las baterías gastadas según las instrucciones del fabricante. Varning! 28 Explosionsfara vid felaktigt batteribyte. Ersätt endast batteriet med samma batterityp som rekommenderas av tillverkaren eller motsvarande. Följ tillverkarens anvisningar vid kassering av använda batterier. OL-19076-01 Statement 1019—Main Disconnecting Device for the Battery Charger Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019 Waarschuwing De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting. Varoitus Pistoke/liitinkohta toimii pääkatkaisumekanismina. Pääsy siihen on pidettävä aina esteettömänä. Attention La combinaison de prise de courant doit être accessible à tout moment parce qu'elle fait office de système principal de déconnexion. Warnung Der Netzkabelanschluß am Gerät muß jederzeit zugänglich sein, weil er als primäre Ausschaltvorrichtung dient. Avvertenza Il gruppo spina-presa deve essere sempre accessibile, poiché viene utilizzato come dispositivo di scollegamento principale. Regulatory Compliance and Safety Information 29 Advarsel Kombinasjonen støpsel/uttak må alltid være tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet. Aviso A combinação ficha-tomada deverá ser sempre acessível, porque funciona como interruptor principal. ¡Advertencia! El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexión principal. Varning! 30 Man måste alltid kunna komma åt stickproppen i uttaget, eftersom denna koppling utgör den huvudsakliga frånkopplingsanordningen. OL-19076-01 Statement 1040—Product Disposal Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Waarschuwing Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Regulatory Compliance and Safety Information 31 Varoitus Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti. Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. Warnung Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen. Avvertenza Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali. Advarsel Endelig kassering av dette produktet skal være i henhold til alle relevante nasjonale lover og bestemmelser. Aviso Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Varning! 32 Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. OL-19076-01 Regulatory Compliance and Safety Information 33 Statement 1045—Short-circuit Protection for the Battery Charger Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Waarschuwing Voor dit product moet kortsluitbeveiliging (overstroombeveiliging) deel uitmaken van de installatie in het gebouw. De installatie moet voldoen aan de nationale en lokale bedradingvoorschriften. Varoitus 34 Tämä tuote vaatii suojauksen oikosulkuja (ylivirtaa) vastaan osana asennusta rakennukseen. Asenna ainoastaan kansallisten ja paikallisten johdotussäännösten mukaisesti. OL-19076-01 Attention La protection de ce produit contre les courts-circuits (surtensions) doit être assurée par la configuration électrique du bâtiment. Vérifiez que l'installation a lieu uniquement en conformité avec les normes de câblage en vigueur au niveau national et local. Warnung Für dieses Produkt ist eine Kurzschlußsicherung (Überstromsicherung) erforderlich, die als Teil der Gebäudeinstallation zur Verfügung gestellt wird. Die Installation sollte nur in Übereinstimmung mit den nationalen und regionalen Vorschriften zur Verkabelung erfolgen. Avvertenza Questo prodotto richiede una protezione contro i cortocircuiti, da fornirsi come parte integrante delle dotazioni presenti nell’edificio. Effettuare l’installazione rispettando le Norme CEI pertinenti. Advarsel Dette produktet krever beskyttelse mot kortslutninger (overspenninger) som en del av installasjonen. Bare installer utstyret i henhold til nasjonale og lokale krav til ledningsnett. Aviso Este produto requer proteção contra curto-circuitos (sobreintensidade de corrente), que deve estar instalada nos edifícios. Instale apenas de acordo com as normas de instalação elétrica nacionais e locais. Advertencia Este producto necesita estar conectado a la protección frente a cortacircuitos (sobretensiones) que exista en el edificio. Instálelo únicamente en conformidad con las regulaciones sobre cableado, tanto locales como nacionales, a las que se tenga que atener. Varning! Denna produkt kräver att kortslutningsskydd (överström) tillhandahålles som en del av byggnadsinstallationen. Installera bara i enlighet med nationella och lokala kabeldragningsbestämmelser. Regulatory Compliance and Safety Information 35 36 OL-19076-01 Regulatory Compliance and Safety Information 37 Statement 1074—Comply with Local and National Electrical Codes Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Waarschuwing Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften. 38 OL-19076-01 Varoitus Laitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti. Attention L'équipement doit être installé conformément aux normes électriques nationales et locales. Warnung Die Installation der Geräte muss den Sicherheitsstandards entsprechen. Avvertenza L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali. Advarsel Installasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter. Aviso A instalação do equipamento tem de estar em conformidade com os códigos eléctricos locais e nacionais. ¡Advertencia! La instalación del equipo debe cumplir con las normativas de electricidad locales y nacionales. Varning! Installation av utrustningen måste ske i enlighet med gällande elinstallationsföreskrifter. Regulatory Compliance and Safety Information 39 40 OL-19076-01 Explosive Gas Warning Warning The use of the Cisco Unified Wireless IP Phone in hazardous environments such as areas where high levels of explosive gas may be present is not recommended. Check with the site safety engineer before using any type of wireless device in such an environment. Battery Disposal Warning Do not dispose of the battery pack in fire or water. The battery may explode if placed in the fire. Regulatory Compliance and Safety Information 41 Japanese Electric Appliance and Radio Laws Statement 371—Power Cable and AC Adapter Statement 372—Wireless LAN Products Battery Safety Notices These battery safety notices apply to the batteries that are approved by the Cisco Unified Wireless IP Phone manufacturers. 42 OL-19076-01 Caution This symbol means reader be careful. In this situation, you might do something that could result in equipment damage. Refer to the product documentation for instructions. Caution The battery pack is intended for use only with this device. Caution Do not disassemble, crush, puncture, or incinerate the battery pack. Caution To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts. Regulatory Compliance and Safety Information 43 Caution Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If the electrolyte has come in contact the eye, flush the eye with water for 15 minutes and seek medical attention. Caution Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees Celsius). Caution Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees Celsius). Caution When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. 44 OL-19076-01 Caution To obtain a replacement battery, contact your local dealer. Use only the batteries that have a Cisco part number. Caution Use only the Cisco power supply that is compatible with your phone. To order your power supply, contact your local dealer and refer to the list of Cisco part numbers. Safety Guidelines The following are safety guidelines for using the Cisco Unified Wireless IP Phone 7920 Series in specific environments: • Do not use this product as the primary communications tool in healthcare environments, as it may use an unregulated frequency band that is susceptible to interference from other devices or equipment. • The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Regulatory Compliance and Safety Information 45 • The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments. • The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). European Directives This section includes conformity statements for European directives. Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein Note 46 The full Declaration of Conformity for EU Directive 1999/5/EC (R&TTE Directive) can be found on www.Cisco.com. OL-19076-01 English This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [Bulgarian]: [Czech]: Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU. Eesti [Estonian]: See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele. Español [Spanish]: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. Regulatory Compliance and Safety Information 47 [Greek]: Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC. Íslenska [Icelandic]: Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC. Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. Latviski [Latvian]: [Lithuanian]: Nederlands [Dutch]: 48 Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC. OL-19076-01 Malti [Maltese]: Magyar [Hungarian]: Norsk Norwegian Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. Polski [Polish]: Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. [Romania]: Slovenskos [Slovenian]: Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC. Regulatory Compliance and Safety Information 49 Slovensky [Slovak]: Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC. Suomi [Finnish]: Svenska [Swedish]: Note 50 You can check on the approval status of your product at the following URL: http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=ext ernalsearch&page=EXTERNAL_SEARCH OL-19076-01 Declaration of Conformity with Regard to the EU Directive 93/42/ECC This device cannot be categorized as a medical device in order to perform diagnostic, monitoring and treatment functions, as defined in the Medical Directive. However, it does conform to the EMC requirements of the Medical Directive 93/42/EEC. As such, it can be used for other applications in a medical environment without causing interference to the medical electrical equipment if operated according to the instructions described in the user manual for this device. The following standards were applied during the assessment of the Cisco Unified Wireless IP Phone 7920 Series against the requirements of the Directives 1999/5/EC and 93/42/ECC: • Radio—EN 300 328 and EN 301 893 • EMC— EN 301.489-1, EN 301 489-17, and EN 60601-1-2 • Safety— EN 60950 and EN 50360 Regulatory Compliance and Safety Information 51 CE Marking For the Cisco Unified Wireless IP Phone 7920 Series, the following CE mark and class-2 identifier are affixed to the equipment and packaging: National Restrictions In the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in general applicable for the 2.4- and 5-GHz bands. Note The regulatory limits for maximum output power are specified in eirp. The eirp level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm). Later in this section you will find an overview of countries in which additional restrictions or requirements or both are applicable. 52 OL-19076-01 The requirements for any country may evolve. Cisco recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs. Table 1 Overview of Regulatory Requirements for Wireless LANs Frequency Band (MHz) Max Power Level (eirp) (mW) Indoor Only Indoor and Outdoor 2400–2483.5 100 5150–53501 200 5470–5725 1. 1000 Dynamic Frequency Selection and Transmit Power Control is required in the 5250 to 5350 MHz and 5470 to 5725 MHz frequency range. The following countries have requirements or restrictions in addition to those listed in Table 2. Denmark In Denmark, the 5150–5350 MHz is also allowed for outdoor usage. I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs. Regulatory Compliance and Safety Information 53 France For 2.4 GHz, the output power is restricted to 10 mW eirp when the product is used outdoors in the band 2454–2483.5 MHz. There are no restrictions when used in other parts of the 2.4 GHz band. For more details, check http://www.arcep.fr/ Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements utilisés en extérieur dans la bande 2454 – 2483,5 MHz. Il n’y a pas de restrictions pour des utilisations dans d’autres parties de la bande 2,4 GHz. Consultez http://www.arcep.fr/ pour de plus amples détails. Latvia The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic communications Office. For more details, check http://www.esd.lv 2,4 GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairāk informācijas: http://www.esd.lv. 54 OL-19076-01 California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33) The battery inside this product might contain perchlorate, a known hazardous substance, so special handling and disposal of this product might be necessary. For more information about perchlorate and best management practices for perchlorate-containing substances, see http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm Standards Compliance This section includes all regulatory, safety, EMC (Class A or Class B), telecom, and NEBS standards. The Cisco Unified Wireless IP Phone 7920 Series and chargers are in compliance with national and international standards in Table 2. Table 2 Standards Compliance Regulatory Compliance Safety Standard • UL 60950 • CSA 22.2 No.60950 Regulatory Compliance and Safety Information 55 Table 2 Standards Compliance (continued) Regulatory Compliance EMC1 56 Standard • EN 60950 • IEC 60950 • AS/NZS 60950 • 47 CFR Part 15 Class B# • CISPR 11 • CISPR 22 Class B# • AS/NZS CISPR 22 Class B# • CISPR 24 • ICES-003 Class B# • EN 301.489-1 • EN 301.489-17 • EN 50082-1 • EN 55022 Class B# • EN 55024 • EN 60601-1-2 OL-19076-01 Table 2 Standards Compliance (continued) Regulatory Compliance EMC3 Standard • EN 61000-3-2 • EN 61000-3-3 • EN 61000-6-1 • KN222 • VCCI Class B# • 47 CFR Part 15 Class B# • CISPR 11 • CISPR 22 Class B# • AS/NZS CISPR 22 Class B# • CISPR 24 • FCC Part 15.247* • FCC Part 15.407** • RSS-210 Radio3 USA Canada Regulatory Compliance and Safety Information 57 Table 2 Standards Compliance (continued) Regulatory Compliance Japan EU RF Exposure3 Standard • IEEE 802.a** • IEEE 802.b/g* • TELEC 71** • EN 300.328* • EN 300.3862 • EN 301.893** • OET-65C (01-01) • ANSI C95.1 (91) • RSS-102 • AS/NZS 2772 • EN 50.360 1. Standards marked with a pound (#) are Class B for the Cisco Unified Wireless IP Phone 7920 and 7921G and do not apply to the chargers which are Class A products. 2. These standards apply only to the Cisco Unified Wireless IP Phone 7921G. 58 OL-19076-01 3. Standards marked with a pound (#) are Class B for the Cisco Unified Wireless IP Phone 7920 and 7921G and do not apply to the chargers which are Class A products. * Standards marked with an asterisk (*) apply to the Cisco Unified Wireless IP Phone 7920 Series when using 802.11b/g WiFi ** Standards marked with two asterisks (**) apply only to the Cisco Unified Wireless IP Phone 7921G when using 802.11a WiFi SAR Statement The Cisco Unified Wireless IP Phone 7920 Series handsets have been tested for body-worn Specific Absorption Rate (SAR) compliance using the specific belt-clip/holster configuration provided with the handset. The FCC has established the detailed body-worn SAR requirements and has established that these requirements have been met with the specific belt-clip/holster provided with the handset. Other belt-clip/holsters or similar accessories that have not been tested may not comply and therefore should be avoided. Regulatory Compliance and Safety Information 59 RF Exposure Information The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in 47 CFR Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. This wireless phone contains a radio transceiver. The radio transceiver and antenna have been designed to meet the RF emission requirements for human exposure as specified by the FCC as well as by other agencies from other countries. These guidelines were developed by the industry based on guidance from the World Health Organization (WHO). These industry standards have been developed to include additional safety margins to ensure that the user is exposed to the least amount of RF radiation. The radio transceiver uses a non ionization type of radiation as opposed to an ionized radiation such as an X-Ray wave. The exposure standard for these devices references a unit of measure known as SAR. The limit as set by the FCC is 1.6W/kg. The tests for this emission level is done in an independent laboratory who employs test methods and operating positions reviewed by the FCC and other agencies. Before the phone was placed on the market, the product was tested and certified in accordance with the FCC regulations to verify that the product did not exceed the FCC SAR requirements. 60 OL-19076-01 The highest measured SAR levels for the phones are these: • Cisco Unified Wireless IP Phone 7920 is 0.54 W/kg. • Cisco Unified Wireless IP Phone 7921G is 0.51W/kg. • Cisco Unified Wireless IP Phone 7925G is 0.768W/kg. Additional information on SAR and RF Exposure can be obtained off the FCC website at: www.fcc.gov/oet/rfsafety There is no conclusive proof that these mobile phones are or are not a health risk. The FDA and numerous researchers are continuing studies of RF radiation and health issues. Additional information on this subject can be obtained from the FDA web site at: www.fda.gov. A recent Swedish study concluded that there is no link between the RF energy emitted from mobile phones and cancer. For more information, refer to the article written by John Boice and Joseph McLaughlin entitled “Epidemiological Studies of Cellular Telephones and Cancer Risk.” The Cisco Unified Wireless IP Phone 7920 Series operates at power levels that are 5 to 6 times lower than most standard cellular, Personal Communications Service (PCS), or Global System for Mobile Communication (GSM) phones. This lower power coupled with a lower transmitter duty cycle reduces the user’s exposure to the RF fields. Regulatory Compliance and Safety Information 61 There are several suggested methods to reduce exposure for the user. Among those include: 1. Using a hands-free handset to increase the distance between the antenna and the head of the user. 2. Orienting the antenna away from the user. Additional information can be obtained from the following documentation: • Cisco Systems Spread Spectrum Radios and RF Safety white paper at the following location: http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/rfhr_wi. htm • FCC Bulletin 56: Questions and Answers about Biological Effects and Potential Hazards of Radio Frequency Electromagnetic Fields • FCC Bulletin 65: Evaluating Compliance with the FCC guidelines for Human Exposure to Radio Frequency Electromagnetic Fields • FCC Bulletin 65C (01-01): Evaluating Compliance with the FCC guidelines for Human Exposure to Radio Frequency Electromagnetic Fields: Additional Information for Evaluating Compliance for Mobile and Portable Devices with FCC limits for Human Exposure to Radio Frequency Emission 62 OL-19076-01 Additional information can also be obtained from the following organizations: • World Health Organization Internal Commission on Non-Ionizing Radiation Protection at www.who.int/emf • United Kingdom, National Radiological Protection Board at www.nrpb.org.uk • Cellular Telecommunications Association at www.wow-com.com General RF Exposure Compliance This device has been evaluated and found compliant to the ICNIRP (International Committee on Non-Ionizing Radiation Protection) limits for Human Exposure of RF Exposure. RF Exposure Statement for Canada This device has been evaluated and found compliant in accordance with Industry Canada RSS-102 with respect to the Canadian Health Code 6 for Human Exposure to RF Fields. Regulatory Compliance and Safety Information 63 RF Exposure Statement for the European Union This device has been evaluated and found compliant in accordance with EU EMF Directive 1999/519/EC. FCC Safety Compliance Statement The Federal Communications Commission (FCC), with its action in ET Docket 93-62, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC-certified equipment. The Cisco Unified Wireless IP Phone 7920 Series meets the uncontrolled environmental limits as stated in OET-65C (01-01) when operated in accordance with the operation guidelines described in this manual. Proper operation of this radio device according to the instructions in this publication will result in user exposure substantially below the FCC recommended limits. 64 OL-19076-01 Manufacturer’s FCC Declaration of Conformity Statement Model: Cisco Unified Wireless IP Phone 7920 FCC Certification Number: MCLU58H002 Model: Cisco Unified Wireless IP Phone 7921G FCC Certification Number: LDK7900001 Model: Cisco Unified Wireless IP Phone 7925G FCC Certification Number: LDK7925G0269 Manufacturer: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA Regulatory Compliance and Safety Information 65 These devices comply with Part 15 rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference. However, there is no guarantee that interference will not occur. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from which the receiver is connected. • Consult the dealer or an experienced radio/TV technician. 66 OL-19076-01 Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco antennas, could void the user’s authority to operate this device. Compliance Statement for Brazil This equipment is a secondary type device, that is, it is not protected against harmful interference, even if the interference is caused by a device of the same type, and it also cannot cause any interference to primary type devices. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Regulatory Compliance and Safety Information 67 For more information, go to this URL: http://www.anatel.gov.br Compliance Statement for Canada This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. 68 OL-19076-01 This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The device is certified to the requirements of RSS-210 for 2.4-GHz spread spectrum devices. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. Compliance Statements for New Zealand This section contains compliance statements for New Zealand. Permit to Connect (PTC) General Warning The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no Regulatory Compliance and Safety Information 69 assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. Use of IP Networks with the PSTN Internet Protocol (IP) by its nature introduces delay into speech signals as each data packet is formulated and addressed. Telecom Access Standards recommends that suppliers, designers and installers using this technology for calls to or from the PSTN refer to ITU E Model requirements in the design of their networks. The overall aim is to minimise delay, distortion and other transmission impairments, particularly for those calls involving cellular and international networks, which already suffer extensive delay. The Use of Voice Compression through the PSTN Because of the extensive delay already experienced when calling cellular and international networks, some of which is already caused by their use of voice compression technologies. Telecom Access Standards will only approve G711 voice technology for use on the PSTN. G711 is an ‘instantaneous speech-encoding technique’ whereas G729 and all its variants are considered ‘near instantaneous’ introducing additional delay into the speech signal. 70 OL-19076-01 Echo cancellation Echo cancellers are not normally required in the Telecom PSTN because geographic delays are acceptable where CPE return loss is maintained within Telepermit limits. However, those private networks making use of Voice-over-IP (VoIP) technology are required to provide echo cancellation for all voice calls. The combined effect of audio/VoIP conversion delay and IP routing delay can cause the echo cancellation time of 64 mS to be required. Compliance Statement for Taiwan This section contains the compliance statement for Taiwan. Regulatory Compliance and Safety Information 71 EMC Class A Notices and Warnings This section includes the EMC Class A notices and warnings for the chargers for the Cisco Unified Wireless IP Phone 7920 Series. 72 OL-19076-01 Statement 191—VCCI Class A Warning for Japan Warning Note This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. See Table 2, Standards Compliance, for the EMC class for specific models and parts. Regulatory Compliance and Safety Information 73 Statement 256—Class A Warning for Hungary Warning 74 This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used. Statement 256 OL-19076-01 Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets Warning This is a Class A Information Product, when used in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate countermeasures. Statement 257 Statement 294—Class A Warning for Korea Warning This is a Class A Device and is registered for EMC requirements for industrial use. The seller or buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type. Regulatory Compliance and Safety Information 75 Statement 340—Class A Warning for CISPR22 Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Statement 340 Waarschuwing Dit is een product van klasse A. In een woonomgeving kan dit product radiostoring veroorzaken. In dat geval moet de gebruiker de juiste maatregelen nemen. Varoitus Tämä on A-luokan tuote. Kotona käytettynä tämä tuote voi aiheuttaa radiotaajuushäiriöitä, jolloin käyttäjän tulisi ryhtyä vaadittaviin toimenpiteisiin häiriöiden ehkäisemiseksi. Attention Il s'agit d'un produit de classe A. Dans un environnement local, ce produit peut entraîner des perturbations radioélectriques, auquel cas l'utilisateur devra éventuellement prendre des mesures adéquates. 76 OL-19076-01 Warnung Dies ist ein Produkt der Klasse A. Bei der Verwendung dieses Produkts im Haus- oder Wohnungsbereich kann es zu Funkstörungen kommen. In diesem Fall muss der Benutzer u. U. angemessene Maßnahmen ergreifen. Avvertenza Prodotto di classe A. È possibile che il prodotto generi interferenze radio in un ambienti chiusi. In questo caso l'utente deve intraprendere le misure adeguate per risolvere il problema. Advarsel Dette er et produkt i klasse A. I et hjemmemiljø kan dette produktet forårsake radioforstyrrelser, og brukeren kan da være nødt til å ta de nødvendige forholdsregler. Aviso Este é um produto de classe A. Em um ambiente doméstico, este produto pode causar interferência de rádio. Nesse caso, talvez o usuário precise tomar as medidas adequadas. ¡Advertencia! Este es un producto de clase A. En el ámbito doméstico, este producto puede causar radiointerferencias, lo que puede hacer necesaria la puesta en marcha de medidas adecuadas. Varning! Detta är en klass A-produkt. Denna produkt kan orsaka radiostörningar inomhus. Det kan då vara ett krav att användaren vidtar lämpliga åtgärder. Regulatory Compliance and Safety Information 77 78 OL-19076-01 EMC Class B Notices and Warnings This section includes the EMC Class B warnings for the Cisco Unified Wireless IP Phone 7920 Series. Statement 157—VCCI Compliance for Class B Equipment Warning This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Regulatory Compliance and Safety Information 79 Statement 295—Class B Notice for Korea Warning 80 This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas. OL-19076-01 Using External Devices The following information applies when you use external devices with the Cisco Unified Wireless IP Phone. Cisco recommends the use of good quality external devices (such as headsets) that are shielded against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions: • Move the external device away from the source of the RF or AF signals. • Route the external device cables away from the source of the RF or AF signals. • Use shielded cables for the external device, or use cables with a better shield and connector. • Shorten the length of the external device cable. • Apply ferrites or other such devices on the cables for the external device. Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors. Regulatory Compliance and Safety Information 81 Caution In European Union countries, use only external headsets that are fully compliant with the EMC Directive [89/336/EC]. Related Documentation For more information, refer to the Cisco Unified Wireless IP Phone 7920 Series publications available at this location: http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_supp ort_series_home.html Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html 82 OL-19076-01 Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco Product Security Overview This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html. If you require further assistance please contact us by sending email to export@cisco.com. Regulatory Compliance and Safety Information 83 84 OL-19076-01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Access Level : Guest,Customer,Partner Country : US Create Date : 2009:08:26 15:37:19Z Creator : FrameMaker 7.2 Date : Wed Aug 26 15:58:17 PDT 2009 Iapath : cisco.com#Products#Cisco Products#Voice and Unified Communications#IP Telephony#IP Phones#Cisco Unified IP Phones 7900 Series#Cisco Unified Wireless IP Phone 7925G Language : en Modify Date : 2011:07:27 10:17:08-07:00 Content Type : cisco.com#US#postSales Doc Type : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : FrameMaker 7.2 Metadata Date : 2011:07:27 10:17:08-07:00 Document ID : uuid:b2e061f2-bb0e-47f6-81de-ddbe188e00db Instance ID : uuid:219b094e-d4dc-4e21-b3e2-275a025a1bea Page Mode : UseOutlines Page Count : 90EXIF Metadata provided by EXIF.tools