Cisco Systems Line Card 4500 E Series Installation Manual

2015-01-05

• Catalyst 4500 E-Series Switches Installation Guide
• Contents
• Preface
  • Audience
  • Organization
  • Related Documentation
  • Conventions
  • Obtaining Documentation and Submitting a Service Request
• Product Overview
  • Switch Features
    • Power Redundancy
    • Catalyst 4503-E Switch Features
    • Catalyst 4506-E Switch Features
    • Supervisor Engine Redundancy
    • Catalyst 4507R-E Switch Features
    • Catalyst 4510R-E Switch Features
  • Supervisor Engines
    • LEDs
    • Gigabit Ethernet Uplink Ports
    • 10-Gigabit Ethernet Uplink Ports
    • SFP Ports
    • 10/100BASE-T Management Port
    • CONSOLE Port
    • RESET Button
    • Compact Flash Slot
  • Fan Assembly
  • Power Supplies
    • Power Supply LEDs
    • Power Supply Fan
    • Load-Sharing Feature
    • Environmental Monitoring Feature
    • 1400 W DC Triple-input Power Supply Operational Modes
  • System Architecture
    • Power Flow
      • Power over Ethernet
        • PoE Over-subscription
        • PoE Switching Modules
        • Deploying PoE on the Cisco Catalyst 4500 E-series
        • Cisco Catalyst 4500 Series External AC Power Shelf and 1400 W DC Power Supply with Integrated Power Entry Module
        • Cisco Catalyst 4500 Series Service Provider DC Power Supply
      • Management Flow
      • Switching Traffic Flow
        • Over-subscription
        • Supervisor Redundancy
• Preparing for Installation
  • Electrostatic Discharge
    • Preventing Electrostatic Discharge Damage
  • Site Power Requirements and Heat Dissipation
  • Power Connection Guidelines for AC-Powered Systems
  • Power Connection Guidelines for DC-Powered Systems
    • Calculating DC Input Current
  • Ventilation
    • Calculating System Heat Dissipation
  • Site-Planning Checklist
• Installing the Switch in a Rack
  • Checking the Shipping Container Contents
  • Rack-Mounting the Switch
    • Required Installation Tools
    • Rack-Mounting Catalyst 4500 E-series Switches
  • System Ground Connection Guidelines
    • Parts and Required Tools
    • Connecting System Ground and Power
• Removing and Replacing FRUs
  • Removing and Replacing the Power Supply
    • Required Tools
    • Removing an AC-Input Power Supply
    • Installing an AC-Input Power Supply
    • Removing a DC-Input Power Supply
      • Required Tools
      • Removal Procedure
    • Installing a DC-Input Power Supply
      • Required Tools
      • Installation Procedure
  • Removing and Replacing the Chassis Fan Assembly
    • Required Tools
    • Removing the Fan Assembly
    • Installing the Fan Assembly
    • Verifying the Installation
  • Replacing Backplane Modules
    • Verify the New Modules
  • Supervisor Memory Upgrade
    • Tools and Equipment Needed
    • Removing Memory
      • Installing SDRAM MiniDIMMs
• Troubleshooting
  • System Boot Verification
  • Using LEDs to Identify Startup Problems
  • System Messages
  • Troubleshooting with Software
  • Troubleshooting the Power Supply
    • System Messages and Power Problems
    • Useful CLI Commands
    • Power Supply Mixing
  • Troubleshooting the Fan Assembly
    • System Messages and Fan Problems
    • Useful CLI Commands
  • Troubleshooting Backplane Modules
  • Troubleshooting Switching Modules
    • System Messages and Switching Modules
    • Useful CLI Commands
  • Troubleshooting Supervisor Engines
    • System Messages and Supervisor Engines
    • Useful CLI Commands
      • Standby Supervisor Engine Problems
      • Switch Self-reset
      • Ports 1/2 and 2/2 Do Not Function
      • Packet Loss
    • Some Problems and Solutions
      • Module Not Online
      • Interface Problems
      • Workstation Is Unable to Log In to the Network
      • NIC Compatibility Issues
      • Interface Is in Errdisable
      • Faulty Supervisor Engine
      • Boot Problems
        • Cannot Connect to a Switch Through the Console Port
        • Cannot communicate with another device, Cannot Telnet to the switch, Cannot communicate with a local or remote host
        • Cannot autonegotiate the port speed/duplex
  • Contacting the Cisco Technical Assistance Center
    • Serial Numbers
• Specifications
  • Catalyst 4503-E Switch Specifications
  • Catalyst 4506-E Switch Specifications
  • Catalyst 4507R-E Switch Specifications
  • Catalyst 4510R-E Switch Specifications
  • Catalyst 4500 Power Supplies
• Repacking a Switch
• Initial Configuration for the Switch
  • Connecting to the Switch
  • Starting the Terminal-Emulation Software
  • Connecting to a Power Source
  • Entering the Initial Configuration Information
    • IP Settings
    • Performing the Initial Configuration
• Module Overview and Specifications
  • Catalyst 4500 Series Switches
  • Catalyst 4500 E-Series Switches
  • Supervisor Engines
    • Front-Panel Components
    • Ethernet Management Port
    • Console Port
    • Supervisor Memory
  • Switching Modules
    • WS-X4606-X2-E
    • WS-X4648-RJ45V-E
    • WS-X4648-RJ45V+E
    • Switching Module LEDs
  • Hot-Swapping Feature
• Index