Clarinox Technologies 1531 Koala Connect User Manual Module

Download:
Mirror Download [FCC.gov]
Document ID	3854610
Application ID	p6rIzijTmvlfvAhf02Y/kg==
Document Description	User Manual Module
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.05kB (500636 bits)
Date Submitted	2018-05-17 00:00:00
Date Available	2018-05-18 00:00:00
Creation Date	2018-05-15 18:40:32
Producing Software	Microsoft® Word 2016
Document Lastmod	2018-05-17 15:41:48
Document Title	KM-153103 koala® connect (aka Joey®) Wi-Fi® + Bluetooth®
Document Creator	Microsoft® Word 2016
Document Author:	Sameera Rajaratne

Clarinox Technologies Pty. Ltd.
ABN 89 062 954 170
28 / 296 Bay Rd
Cheltenham VIC 3192
Tel (613) 9095 8088
www.clarinox.com
KM-153103 koala® connect (aka Joey®)
DATASHEET
The information contained herein shall not be disclosed to unauthorized persons. This document remains the
property of Clarinox Technologies Pty Ltd. It contains proprietary and confidential information and is considered to
be a trade secret by Clarinox Technologies Pty Ltd. No information contained herein is to be shared, copied,
disclosed, or otherwise compromised in any way without the written consent of Clarinox Technologies Pty Ltd. The
contents of this document are subject to change without notice. Clarinox Technologies Pty Ltd reserves the right
to make changes in this document as progress in planning, development, engineering or manufacturing warrants.
All Rights Reserved, Copyright Clarinox Technologies Pty Ltd © 2018
KM-153103 Datasheet
Revision History
Revision
Date
Designed by
Approved by
Description
1.0
08 May 2018
ND
GT
Initial draft
1.1
15 June 2018
ND
GT
FCC Certification warning details added
Page 1
KM-153103 Datasheet
Table of Contents
Highlights ................................................................................................................................ 4
Product Description ................................................................................................................ 4
Module Certification Details ........................................................................................... 5
1.2.1.1
Federal Communications Commission (FCC) Statement ............................................ 5
1.2.1.2
End Product Labelling ................................................................................................. 5
Important Notice to OEM Integrators ............................................................................ 5
Antenna Installation ........................................................................................................ 6
Manual Information to the End User .............................................................................. 6
Federal Communication Commission Interference Statement ...................................... 6
Radiation Exposure Statement ....................................................................................... 7
Product Selector...................................................................................................................... 8
Module Pinouts ....................................................................................................................... 8
Hardware Interfaces ............................................................................................................... 9
Bluetooth Signals Hardware Details ..................................................................................... 10
WiFi Signals Hardware Details .............................................................................................. 10
Block Diagram ....................................................................................................................... 11
Features ................................................................................................................................ 11
Microcontroller ..................................................................................................................... 12
Software Features ................................................................................................................. 12
Package (Dimensions) ........................................................................................................... 14
Environmental Data, Quality & Reliability ............................................................................ 14
Electrical Characteristics ....................................................................................................... 14
Applications........................................................................................................................... 15
Pin Compatible Wireless Variants ......................................................................................... 15
Supporting Products ............................................................................................................. 15
Placement Details ................................................................................................................. 16
Page 2
KM-153103 Datasheet
List of Figures
Figure 1: KM-153103 Koala® Connect Module ....................................................................................... 4
Figure 2: Module Pinouts ........................................................................................................................ 8
Figure 3: KM-153103 Module Block Diagram ....................................................................................... 11
Figure 4: Placement Details .................................................................................................................. 16
List of Tables
Table 1: Product Selector ........................................................................................................................ 8
Table 2: Module Pinouts ......................................................................................................................... 9
Table 3: Bluetooth Signals Hardware Details ........................................................................................ 10
Table 4: WiFi Signals Hardware Details................................................................................................. 10
Page 3
KM-153103 Datasheet
Highlights
•
•
•
•
•
•
•
•
Complies with Part 15 of the FCC Rules
Wi-Fi & dual-mode Bluetooth
Supports custom Bluetooth Low Energy profiles and services
On-board Wi-Fi + Bluetooth antennas
Micro access point
High speed iAP & iAP2 support
Embedded Wi-Fi and Bluetooth stack
Use directly with final design or prototype on koala® evm with Clarinox Carrier boards. (KC0181xx, KC-0081xx)
Product Description
Figure 1: KM-153103 Koala® Connect Module
Joey® Wi-Fi® + Bluetooth® modules are compact all-in-one standalone modules featuring Wi-Fi WLAN
/ Wi-Fi Direct, Bluetooth Classic and Bluetooth Low Energy. When used in conjunction with koala®
evm, the Joey® modules provide a stable environment to ease the integration of wireless technologies
into a project. The modules feature Texas Instruments’ WL183xMOD variants with Wi-Fi and
Bluetooth coexistence and STM32F412CG on-board processor to drive the user application in addition
to supporting the wireless protocols. Flexibility of wireless technology is provided with version 4.1
Bluetooth Classic, Bluetooth Low Energy, WLAN and Wi-Fi Direct with IEEE802.11a/b/g/n standards
supported.
Joey® modules will help shorten the development time, reduce development costs and open the door
to new possibilities for wireless device features. Joey® modules may be used stand-alone products
with no additional hardware required; or used in conjunction with other hardware. Additional sensors
can be connected directly to the module via GPIO, ADC, I2C, SPI and UART.
Page 4
KM-153103 Datasheet
Module Certification Details
KM-153103 Koala® Connect module complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Clarinox Technologies declares that the radio equipment type RF module is in compliance with
Directive 2014/53/EU.
The compliance has been verified in the operating frequency band of 2400-2483.5 MHz. Developers
and integrators that incorporate the KM-153103 Module in any end products are responsible for
obtaining applicable regulatory approvals for such end product.
The KM-153103 has been tested in the 2400 MHz-2483.5 MHz ISM frequency band at 3.3 V with a
maximum peak power of 19.7 dBm EIRP across the temperature range –40°C to +85°C and tolerance.
1.2.1.1 Federal Communications Commission (FCC) Statement
This module complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF exposure limits. This
transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
1.2.1.2 End Product Labelling
This module is designed to comply with the FCC statement, FCC ID: 2AN5P1531. The host system
using this module must display a visible label indicating the following text:
"Contains FCC ID: 2AN5P1531"
Important Notice to OEM Integrators
This module is limited to OEM installation ONLY.
This module is limited to installation in mobile or fixed applications, according to FCC Part 2.1091(b).
The separate approval is required for all other operating configurations, including portable
configurations with respect to FCC Part 2.1093 and different antenna configurations
For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify
compliance as a composite system. When testing the host device for compliance with Part 15
Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the
transmitter module(s) are installed and operating. The modules should be transmitting and the
evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental
and out of band emissions). The host manufacturer must verify that there are no additional
unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are
complaint with the transmitter(s) rule(s).
Page 5
KM-153103 Datasheet
Antenna Installation
The antenna must be installed such that 20 cm is maintained between the antenna and users,
The transmitter module may not be co-located with any other transmitter or antenna.
The ATN016008LCD2442MA1 antenna with -1.41 dBi gain was verified in the conformity testing.
Radiated transmit power must be equal to or lower than that specified in the FCC Grant of
Equipment Authorization for FCC ID: 2AN5P1531. A separate approval is required for all other
antenna type, or higher gain antenna.
In the event that these conditions cannot be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the
FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate
FCC authorization.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this
module. The end user manual shall include all required regulatory information/warning as show in
this manual.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Page 6
KM-153103 Datasheet
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
Page 7
Bluetooth Qualification
Bluetooth Classic and Low Energy
WiFi
Antenna Type
Max Number of Connections
UART
SPI and I2C
GPIO Pins
ADC Channels
Power Supply: 3.3V
Current Draw (Idle)
Current Draw (TX)
I/O Voltage: 1.8V
Solder Pins
Dimensions (W x L x H) mm
Support KC-0181xx Joeyduino Carrier Board
Support KC-0081xx WMI Carrier Board
KM-153103 Datasheet
Product Selector
Model
Radio
Interfaces
Power
Package
KM-153103
V4.1
✓
✓
6-10
21
10
✓
60mA
90mA
✓
32
20x34x3
✓
✓
KM-141202
V4.1
✓
6-10
23
10
✓
30mA
50mA
✓
32
20x30x3.5
✓
✓
Table 1: Product Selector
Module Pinouts
Figure 2: Module Pinouts
Page 8
KM-153103 Datasheet
PIN
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
FUNCTION
AUD_IN
AUD_OUT
AUD_CLK
AUD_FSYNC
JTAG_TMS
JTAG _TCK
JTAG _TDI
JTAG _TDO
JTAG _JNRST
JTAG _NRST
USB_FS_DP
USB_FS_DM
USB_FS_ID
USB_FS_VBUS
USB_FS_SOF
VBAT
GND
GND
3V3
3V3
GPIO_1
GPIO_2
SOURCE/TARGET
WL1831
WL1831
WL1831
WL1831
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
Power Supply
Power Supply
STM32F412
STM32F412
SPI1_MOSI
SPI1_MISO
SPI1_SCK
SPI1_NSS
I2C1_SMBA
I2C1_SCL
I2C1_SDA
USART1_TX
USART1_RX
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
STM32F412
PORT DETAILS
AUD_IN (PCM)
AUD_OUT (PCM)
AUD_CLK (PCM)
AUD_FSYNC (PCM)
PA13 (JTAG)
PA14 (JTAG)
PA15 (JTAG)
PB3 (JTAG)
PB4 (JTAG)
NRST (JTAG)
PA12 (USB FS/OTG)
PA11 (USB FS/OTG)
PA10 (USB FS/OTG)
PA9 (USB FS/OTG)
PA8 (USB FS/OTG)
VDD (1V8)
VSS (GND)
VSS (GND)
3V3
3V3
PB0 (GPIO)
PB1 (GPIO)
NC
PA7 (SPI)
PA6 (SPI)
PA5 (SPI)
PA4 (SPI)
PB5 (I2C)
PB8 (I2C)
PB9 (I2C)
PB6 (USART)
PB7 (USART)
Table 2: Module Pinouts
Hardware Interfaces
SPI
I2C
UART
PCM
GPIO pins
ADC channels
1 (4 pins)
1 (3 pins)
1 (2 pins)
1 (4 pins)
16*
Page 9
KM-153103 Datasheet
Bluetooth Signals Hardware Details
WiLink8 Bluetooth module
BT EN (Bluetooth Enable)
HCI RTS
HCI CTS
HCI RX
HCI TX
Microcontroller STM32F412 port
PC13 (Output)
PA0
PA1
PA2
PA3
Table 3: Bluetooth Signals Hardware Details
WiFi Signals Hardware Details
WiLink8 WiFi module
WL_EN (Wi-Fi Enable)
WL_IRQ (Wi-Fi IRQ)
SPI MISO
SPI CLK
SPI MOSI
SPI CS
Microcontroller STM32F412 port
PB2 (Output)
PB10 (Interrupt)
PB14
PB13
PB15
PB12
Table 4: WiFi Signals Hardware Details
Page 10
KM-153103 Datasheet
Block Diagram
Figure 3: KM-153103 Module Block Diagram
Features
Wi-Fi & Bluetooth
module
Wi-Fi standards
Wi-Fi bands
Wi-Fi roles
Wi-Fi maximum
throughput
Wi-Fi MIMO
Bluetooth modes
TI WL1831MOD
IEEE 802.11a/b/g/n, Wi-Fi Direct Concurrent Operation (Multichannel,
Multirole)
2.4 GHz
STA, AP, Wi-Fi Direct
TCP: 80 Mbps
UDP: 100 Mbps
2x2 MIMO
V4.1 BR + EDR (Classic Bluetooth with EDR)
Page 11
KM-153103 Datasheet
Output power
Sensitivity
Antenna
v4.1 LE (Bluetooth Low Energy)
Wi-Fi: +17.3 dBm (@ 1 Mbps DSSS)
Classic Bluetooth:
BR: +11.7 dBm (GFSK)
EDR: +7.2 dBm
Bluetooth LE: +7.0 dBm
Wi-Fi: -96.3 dBm (@ 1 Mbps DSSS)
Classic Bluetooth: -92.2 dBm (GFSK)
Bluetooth LE: -92.2 dBm
Internal antenna
Microcontroller
STM32F412CG
Core: ARM® 32-bit Cortex®-M4
Package: UFQFPN48
CPU: 100 MHz
SRAM: 256 Kbytes
Flash: 1 Mbyte
Software Features
Embedded software
Wi-Fi Security
Wi-Fi operational
modes
Bluetooth Classic
Profiles & Protocols
ClarinoxBlue Bluetooth Stack
ClarinoxBlue Bluetooth Low Energy Stack
ClarinoxWiFi WLAN Stack
(all combinations of the above three are possible)
Combined IPv4 and limited IPv6 stack
Supported Interfaces:
➢ UART
➢ I2C
➢ SPI
➢ USB
WEP 64/128
WPA and WPA2
TKIP and AES/CCMP hardware accelerator
LEAP, PEAP, EAT-TLS
Access Point(AP) mode
Station mode
P2P (Wi-Fi Direct)
Profiles:
➢ AVRCP Controller 1.5
➢ A2DP Source | Sink 1.3
➢ DID 1.3
➢ FTP Client | Server 1.1
➢ GAVDP Initiator | Acceptor | Delay Reporting Initiator 1.3
➢ GOEP 1.1
➢ HDP Source | Sink 1.1
➢ HFP AG | HF 1.7
➢ HID 1.1 General HID Host
➢ HSP AG | HS 1.2
Page 12
KM-153103 Datasheet
➢
➢
➢
➢
➢
➢
➢
➢
IOP
MAP 1.1 Messaging Client Equipment (MCE)
MPS 1.0
OPP Client | Server 1.1
PAN User
PBAP Client 1.2
Report Protocol | HID Device Role 1.1
SPP DevA| DevB 1.2
Protocols:
➢ AVCTP Controller 1.4
➢ AVDTP Source | Sink | Initiator | Acceptor 1.3
➢ BNEP
➢ GAP (Generic Access Profile)– BR/EDR/LE
➢ MCAP Source | Sink
➢ OBEX 1.1
➢ OBEX over RFCOMM 1.1
➢ RFCOMM 1.1
➢ SDP (Service Discovery Protocol) Server | Client
Bluetooth Low Energy
Profiles & Protocols
Profiles:
➢ ANP Server | Client 1.0
➢ BAS Profile over LE
➢ BLP Sensor (Server) | Collector (Client)
➢ CPP Collector 1.0
➢ CSCP Sensor (Server) | Collector (Client)
➢ CTS Profile over LE 1.0
➢ DIS profile over LE 1.1
➢ FMP Target (Server) | Locator (Client)
➢ GLP Sensor (Server) | Collector (Client)
➢ HIDS Profile over LE
➢ HOGP Device (Server) 1.0
➢ HRP Sensor (Server) | Collector (Client)
➢ HRS Profile over LE
➢ HTP Thermometer (Server) | Collector (Client)
➢ IAS Profile over LE
➢ LNP Sensor (Server) | Collector (Client) 1.0
➢ PASP Server
➢ PXP Reporter (Server) 1.0
➢ RSCP Sensor (Server)
➢ TIP Server
Protocols:
➢ ATT (Attribute Protocol) Client
➢ BPP (Basic Printing Profile) 1.2 Printer | Sender
➢ BIP (Basic Imaging Profile) 1.2 Image Push Initiator | Image Push
Responder | Image Pull Initiator | Image Pull Responder
➢ CTN (Calendar, Tasks and Notes Profile)
➢ GAP (Generic Access Profile)– BR/EDR/LE
➢ GATT (Generic Attribute Profile) over LE Client | Server
➢ HCRP (Hardcopy Cable Replacement Profile) 1.2
Page 13
KM-153103 Datasheet
Bluetooth Security
Max. number of
connections
Single/Dual processor
Approach
Simultaneous Wireless
usage
API Interface
Supported Wi-Fi modes
iOS connectivity
Secure Simple Pairing
128-bit AES encryption
BLE Secure Connection
Wi-Fi 2.4 GHz: Up to 8 connections
Classic Bluetooth: Up to 7 connections
Bluetooth LE: Up to 10 connections
User applications can be implemented on koala® connect with Clarinox
WiFi / Bluetooth classic and low energy protocol stacks running on the
same single CPU. Dual CPU approach is also possible by having Clarinox
stacks implemented on koala® connect and user application running on
a separate CPU. Using Joey® in both these approaches enhances IO
capability in the system.
Classic Bluetooth, Bluetooth Low Energy and Wi-Fi technologies can be
used simultaneously and gateway functionality (simultaneous roles)
amongst these technologies are possible
Host to module connection supports Request-Response based
implementation
UART, I2C, SPI interfaces supported
Applications can be simulated using a desktop environment
AP, Station and P2P modes are supported
Simultaneous nodes such as AP and Station are supported
iAP & iAP2
Package (Dimensions)
Dimensions
(W × L × H)
Weight
Mounting
20 mm x 34 mm x 3 mm
< 2.0 g
Solder edge pins with castellation (visually inspectable)
Environmental Data, Quality & Reliability
Operating temperature
Storage temperature
-10 °C to +60 °C
-40 °C to +85 °C
Electrical Characteristics
Supply voltage
I/O voltage
Average Power consumption
Current draw
Idle*
(Bluetooth)
Bluetooth Stack initialization
Searching for devices
Current draw (Wi-Fi) WiFi Stack initialization
Start interface as Station
Idle as Station
Connect to Wi-Fi network as Station
Start interface as Access Point (AP)
3.3 V
1.8 V
0.15W
33mA
33mA
60mA
90mA
90mA
60mA
110mA
95mA
Page 14
KM-153103 Datasheet
Idle as Access Point
60mA
Connect to device as AP
160mA
*Idle current is measured after Bluetooth is initialized while no any other functions are carried out.
The current draw values in above table are the total current drawn by the Joey® module when
connected to Clarinox Joeyduino Carrier.
Applications
Internet of Things (IoT)
Industrial IoT
Health
Consumer Electronics, Home Automation,
Wearables
Industrial Automation
Medical/Health devices
Pin Compatible Wireless Variants
KM-153103-1831
KM-153103-1837
KM-153103-1801
KM-153103-1807
2.4 GHz Wi-Fi and Bluetooth
5 GHz and 2.4 GHz Wi-Fi and Bluetooth
2.4 GHz Wi-Fi only
5 GHz and 2.4 GHz Wi-Fi only
Supporting Products
KC-0181xx Joeyduino Carrier / Breakout Board for Joey® modules
KC-0081xx WMI Carrier / Breakout Board for Joey® modules
KM-9805xx Sensor Board with 9D sensor and haptic driver
Page 15
KM-153103 Datasheet
Placement Details
Figure 4: Placement Details
Page 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Sameera Rajaratne
Create Date                     : 2018:05:15 18:40:32+10:00
Modify Date                     : 2018:05:17 15:41:48+08:00
Language                        : en-AU
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Producer                        : Microsoft® Word 2016
Format                          : application/pdf
Title                           : KM-153103 koala® connect (aka Joey®) Wi-Fi® + Bluetooth®
Creator                         : Sameera Rajaratne
Creator Tool                    : Microsoft® Word 2016
Metadata Date                   : 2018:05:17 15:41:48+08:00
Document ID                     : uuid:84FC9856-5EF5-472A-A1D4-D2F268C5A237
Instance ID                     : uuid:f129efc3-46f0-4aa8-89e4-543fc7f59f9a
Page Count                      : 17

EXIF Metadata provided by EXIF.tools