Clarion HGZ0036 Car equipment unit User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1159179
Application ID	5SaHkEevmclR0PGII+WGBA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.12kB (901558 bits)
Date Submitted	2009-08-26 00:00:00
Date Available	2009-08-28 00:00:00
Creation Date	2009-08-25 16:17:03
Producing Software	クセロPDF2 v2.10
Document Lastmod	2009-08-25 17:52:39
Document Title	Manual
Document Creator	Xelo PDFLibrary

Clarion Co.,Ltd.
Draft Edition
(UGZZ5-X01)INSTRUCTION MANUAL
Table of Contents
1. BLUETOOTH MODULE SPECIFICATION
1-1. PRODUCT NAME
.......... 2
1-2. MANUFACTURE
.......... 2
1-3. FEATURES
.......... 2
1-4. SPECIFICATION
1-4-1. MECHANICAL SPECIFICATION
1-4-1-1. EXTERNAL DIMENSIONS
.......... 2
1-4-1-2. MASS
.......... 2
1-4-2. ELECTRICAL SPECIFICATION
1-4-2-1. POWER SUPPLY VOLTAGE
.......... 2
1-4-2-2. TEMPERATURE RANGE
.......... 2
1-4-3. RF SPECIFICATION
1-4-3-1. NORMAL TRANSMIT POWER ( AVERAGED POWER )
.......... 2
1-4-3-2. REFERENCE SENSITIVITY LEVEL ( BER = 0.001% )
.......... 2
1-4-4. EXTERNAL ANTENNA SPECIFICATION
1-4-4-1. PRODUCT NAME
.......... 3
1-4-4-2. MANUFACTURE
.......... 3
1-4-4-3. ANTENNA TYPE
.......... 3
1-4-4-4. AVERAGE GAIN
.......... 3
1-4-4-5. PEAK GAIN
.......... 3
1-4-4-6. EXTERNAL DIMENSIONS
.......... 3
1-5. LABEL INFORMATION
1-5-1. LABEL LAYOUT
.......... 3
1-5-2. CONTENTS OF LABEL
.......... 4
1-6. CONNECTOR PIN ASSIGNMENT
.......... 4
1-8. GND INFORMATION
.......... 5
2. PROCEDURE TO BUILD IN
2-1. PROCEDURE FOR EXTERNAL ANTENNA
.......... 6
2-2. PROCEDURE FOR UGZZ5-X01
.......... 6
3. NOTICE
.......... 8
(UGZZ5-X01)INSTRUCTION MANUAL - 1 / 10 -
Clarion Co.,Ltd.
Draft Edition
1. BLUETOOTH MODULE SPECIFICATION
1-1. PRODUCT NAME
UGZZ5-X01
1-2. MANUFACTURE
ALPS ELECTRIC
1-3. FEATURES
Bluetooth™ Specification V2.0 support
Complete type of Bluetooth module,built in various profile
Built-in Link controller, Link manager Protocol
Output power class 2 compliant
An external antenna model (Antenna type is inverted-F antenna)
Full custom package with pwb can be fit to only
Bluit-in Flash memory(8bit), system clock 26MHz(OSC)
FFC cable interface
1-4. SPECIFICATION
1-4-1. MECHANICAL SPECIFICATION
1-4-1-1. EXTERNAL DIMENSIONS
Refer to the following page.
SW
ALPS ELECTRIC
SKRPABE010
RF CONNECTOR
HIROSE ELECTRIC
U.FL-R-SMT-1[15]
ON-BOARD RAG TERMINAL
KITAGAWA INDUSTRIES
OG-RM26
CONNECTOR
TERMINAL NO.
Bluetooth Module
ALPS ELECTRIC
UGZZ5-611B
FLEXIBLE CABLE
CONNECTOR
HIROSE ELECTRIC
FH12A-30S-0.5SH(55)
(UGZZ5-X01)INSTRUCTION MANUAL - 2 / 10 -
Unit: [mm]
Clarion Co.,Ltd.
Draft Edition
1-4-1-2. MASS
10.6 [g]
1-4-2. ELECTRICAL SPECIFICATION
1-4-2-1. POWER SUPPLY VOLTAGE
DC +3.1 to 3.5 [V]
1-4-2-2. TEMPERATURE RANGE
-30 to +85 [degree C]
1-4-3. RF SPECIFICATION
1-4-3-1. NORMAL TRANSMIT POWER ( AVERAGED POWER )
-6 to +4 [dBm]
1-4-3-2. REFERENCE SENSITIVITY LEVEL ( BER = 0.001% )
MAX. -70 [dBm]
1-4-4. EXTERNAL ANTENNA SPECIFICATION
1-4-4-1. PRODUCT NAME
ANT0791-16B/U-BT
1-4-4-2. MANUFACTURE
NISSEI ELECTRIC
1-4-4-3. ANTENNA TYPE
Inverted F
1-4-4-4. AVERAGE GAIN
-6.81 [dBi]
1-4-4-5. PEAK GAIN
Horizontal : -3.1 [dBi]
Vertical
: -5.4 [dBi]
1-4-4-6. EXTERNAL DIMENSIONS
(UGZZ5-X01)INSTRUCTION MANUAL - 3 / 10 -
Clarion Co.,Ltd.
Draft Edition
1-5. LABEL INFORMATION
1-5-1. LABEL LAYOUT
Refer to the following page.
1-5-2. CONTENTS OF LABEL
Model NO.
Clarion Parts NO.
Rev. NO.
Lot NO.
FCC/IC ID
TELEC Mark & ID
Company Name
(UGZZ5-X01)INSTRUCTION MANUAL - 4 / 10 -
Clarion Co.,Ltd.
Draft Edition
1-6. CONNECTOR PIN ASSIGNMENT
FFC Connector terminal NO.
30
NO.
PIN NAME
I/O
DESCRIPTION
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
GND
GND
PTB1
PTE5
PTE0
BOOT_E
PTA5
PTA6
GND
SIOF_SCK
SIOF_SYNC
SIOF_RxD
SIOF_TxD
CLK11/12M
GND
SCIF0_RTS
SCIF0_CTS
SCIF0_TXD
SCIF0_RXD
GND
GND
GND
GND
ILLILL+
DVD_EJECT
RESETP/
NC
VCC
VCC
Ground
Ground
AV Master Clock Select(44.1kHz=Low, 48kHz=High)
PCM_Mute
PCM_Reset (Active Low )
BOOT Enable
HF/AV Status signal
MODE Select (Normal = NC / RF test = Low )
Ground
Audio Clock
Audio Frame signal
AV/HF Input
AV/HF Output
AV Master clock Input
Ground
UART_RTS
UART_CTS
UART_TX
UART_RX
Ground
Ground
Ground
Ground
LED Signal
LED Signal
DISC Eject Signal
Reset (Active Low )
NonConnection
Power Supply 3.3V
Power Supply 3.3V
(UGZZ5-X01)INSTRUCTION MANUAL - 5 / 10 -
Clarion Co.,Ltd.
Draft Edition
1-7. GND INFORMATION
GND PIN of MAJOR PARTS.
NO.
REF.
CN1
CN2
CN3
CM3
IC1
IC2
IC3
PARTS NAME
DESCRIPTION
GND PIN NO.
FH12A-30S-0.5SH(55)
FFC CONNECTOR
U.FL-SMT1[15]
RF CONNECTOR
OG-RM26
ON-BOARD RAG TERMINAL
SKRPABE010
SW
UGZZ5-X611B
BLUETOOTH MODULE IC
BD5225FVE
RESET IC
TC7WH241FK
LOGIC IC
1,2,9,15,20,21,22,23
1,3
3,4
2,6,14,24,26,36
CM
CN2
CONNECT TO CASE
GND
CN4
IC2
CONNECT TO FSWA PCB
(NAVI BOARD)
CN1
IC1
IC3
・・・ GND AREA
(UGZZ5-X01)INSTRUCTION MANUAL - 6 / 10 -
Clarion Co.,Ltd.
Draft Edition
2. PROCEDURE TO BUILD IN
2-1. PROCEDURE FOR EXTERNAL ANTENNA
(1) Install External antenna to Upper cover (U-COVER AS)
External antenna
Screw
Upper cover
Half pierce
Tighten up a screw after firmly-fitting an external antenna in half pierce of the cover.
(2) Install U-COVER AS to Navigation unit
Screw
U-COVER AS
1)Be careful so that a cable is not tucking
2)Tighten up a screw in order of one to two ( In addition, it is random order )
(UGZZ5-X01)INSTRUCTION MANUAL - 7 / 10 -
Clarion Co.,Ltd.
Draft Edition
2-2. PROCEDURE FOR UGZZ5-X01
(1) Install UGZZ5-X01 to Navigation unit
BtoB connection
External antenna
A notch
Navigation unit
UGZZ5-X01
FFC cable connection
FSWA PCB
Screw
1)Install UGZZ5-X01 with a screw
※Take out an external antenna from a notch part
2)Install FSWA with a screw
3)Connected FSWA in order of 40pin-FFC cable, 80pin-FFC cable
※firmly-lock the FFC connector
(2)Connect External antenna to UGZZ5-X01 , FFC cable connection between UGZZ5-X01 and FSWA PCB
1)Connect the dot mark side to FSWA PCB
※firmly-lock the ＦＦＣ connector
Navigation unit
External antenna
A dot mark
Point of contact side
30pin FFC cable
2)connect a cable as follows. After placement , fix it in TAPE-DV1.
Arrange a cable between
BT module IC and FFC connector
TAPE-DV1
More than 4
A cable do not be arranged
on a white print part
External antenna
More than 4.5
(UGZZ5-X01)INSTRUCTION MANUAL - 8 / 10 -
Clarion Co.,Ltd.
Draft Edition
(3) Install F-SHIELD-CASE-AS to Navigation unit
(4) Install INNER-ESCUTCHEON-AS to Navigation unit
(5) Install REAR-COVER-AS to Navigation unit
(6) FPC cable connection between Navigation unit and 8400US-MONITOR-AS
(7) Install 8400US-MONITOR-AS to Navigation unit
(8) Pasting up of B-COVER in Navigation unit
A caulking hole
BT-COVER
Pasting up standard
1)Pasting up of B-COVER in Navigation unit
※Pasting up standard
Lengthwise direction
cross direction
:An end face of A
:Right and left are equal
(9) Pasting up of Rating-label in Navigation unit
(10) Pasting up of Connector-sheet in Navigation unit
UGZZ5-X01 Installation position
External antenna position
(UGZZ5-X01)INSTRUCTION MANUAL - 9 / 10 -
Clarion Co.,Ltd.
Draft Edition
3. NOTICE
-Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
-Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
-Please note that this users manual should not be provided to end-users.
-The following sentence has to be displayed on the outside of the device in which the module is installed:
"Contains Transmitter Module FCC ID: SJ2HGZ0036", or "Contains FCC ID: SJ2HGZ0036"
-This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
-The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
(UGZZ5-X01)INSTRUCTION MANUAL - 10 / 10 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2009:08:25 16:17:03+09:00
Creator Tool                    : Xelo PDFLibrary
Modify Date                     : 2009:08:25 17:52:39+09:00
Metadata Date                   : 2009:08:25 17:52:39+09:00
Producer                        : クセロPDF2 v2.10
Format                          : application/pdf
Document ID                     : uuid:28480a6f-39f8-4af6-87c0-bb46a3599d85
Instance ID                     : uuid:5e042525-f19a-4b1c-9680-787139ae0444
Page Count                      : 10
Creator                         : Xelo PDFLibrary

EXIF Metadata provided by EXIF.tools