Clipcomm EDR-AP Bluetooth Access Point User Manual

Download:
Mirror Download [FCC.gov]
Document ID	751294
Application ID	oydN9cqA5ZAZF00ByiL2Lg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.34kB (466713 bits)
Date Submitted	2007-01-26 00:00:00
Date Available	2007-01-26 00:00:00
Creation Date	2007-01-23 09:57:02
Producing Software	AFPL Ghostscript 8.50
Document Lastmod	2007-01-23 18:09:06
Document Title	Microsoft Word - ANYCOM-EDR-AP_ENG_20061110 _4_.doc
Document Creator	Pscript.dll Version 5.0
Document Author:	kimhansung

■ Table of Contents
1.
EDR-AP KEY FEATURES
2.
PART CHECKLIST
3.
PRODUCT DESCRIPTION
4.
SPECIFICATION
5.
CONTROLS AND FUNCTIONS [BUTTON/LED/REAR PANEL]
6.
EDR-AP INSTALLATION
7.
CAUTION
8.
ETHERNET NETWORK CONNECTION
■ EDREDR-AP Key Features
EDR-AP supports Bluetooth PAN / DUN / OPP Gateway.
EDR-AP provides a built-in web server for convenient configuration.
EDR-AP support private leased lines, ADSL/VDSL modems using PPPoE and cable modems (DHCP).
■ Part Checklist
Please check and make sure that you have the following package contents.
Item
Q’ty
Use
EDR-AP Body
EDR-AP main body
User Manual
User guide that explains
implementation examples
Antenna
Bluetooth Antenna
Power Adaptor
EDR-AP power supply device
LAN Cable(1.5m)
Cable that connects EDR-AP and Internet Modem
features,
functions
and
■ Product Description
Please check and make sure that you have all the following package contents.
■ Specification
Name
Description
Output Power
15 ~ 20 dBm
Rx Sensitivity
85 dBm
Channel
79 CH
Antenna
2.4GHz Band 1/2λSleeve Dipole Antenna
Frequency
2402 ~ 2480 MHz
Modulation
FSK, QPSK
Adaptor
5V 1A
Max Current
560mA
Operating
Temperature
-20℃~55℃
■ Controls and Functions
▌ Button
Name
Button
Description
If you press any two buttons on the unit, the LED (Green) blinks and EDR-AP goes to
discoverable and pairable mode.
▌LEDs
Name
Color
Status
ON
STATUS
WAN
Green
Green
BLINK
Description
Power is ON and Bluetooth is normal state mode
Other device is connected and new device is under pairable
mode
OFF
Power is OFF or Bluetooth is abnormal state mode
ON
TCP/IP communication is able mode
BLINK
OFF
TCP/IP communication is disable mode
No connection with the Ethernet
* When EDR-AP restarts, every LED blinks several times
▌ Rear Panel
(From the left to the right side)
Name
Description
RESET
Press this button for more than three seconds to restore the original factory default setting of
EDR-AP
(Reboot: press between 1~3 seconds)
5V1A
WAN
Connect the Power Adaptor
Connect to private leased line, ADSL/VDSL modem, cable model using LAN cable (UTP
Cable)
■ EDREDR-AP Installation
Please check the port location of the rear panel and then follow the steps below to install the BS-P100 properly.
▌ Ethernet Network Connection
Let’s check the network cable connection to use the internet service.
Modem
①
Pull out the cable from the Ethernet (LAN) port of modem and connect it to the WAN port at the EDR-AP’s rear
panel.
②
Connect the power adaptor to the “POWER” port at the EDR-AP rear panel.
③
Connect antenna provided to antenna connecting jack at the side of body. When you connect antenna, twist it on
carefully and lastly push it strongly.
10
■ CAUTION
Use only the power adaptor supplied. Using other power adaptors may cause the voice quality to deteriorate and
malfunction.
Install EDR-AP far from wireless LAN/microwave about 1m. If installed close may cause jamming.
Use only the antenna provided.
The data of this device could be lost When the static electricity occurs in antenna portion
11
■ Configuration using Web Interface
You can use Web Interface with web browser in order to set the EDR-AP configuration. You can access the Web
Interface by IP address or Bluetooth connection (PAN). For the access by Bluetooth connection, connect with PAN of
EDR-AP and access with Gateway address assigned from the PC.
▌ Checking device’
device’s IP address
In case of you don’t know the IP address, you can check the current EDR-AP IP address by configuring IP address of
user’s PC.
①
Click [Start] from the bottom menu bar, then choose [Settings].
②
Select [Control Panel] to view a new window, and then choose [Network connections].
③ Right click on [Local Area Connection]. If there are more than one Local Area Connections, choose the one that
is currently in use.
④
Choose [Properties] when a new window appears.
⑤ Click [IP Address] tab and then check the [Obtain an IP address automatically] box. If the box is already checked,
you don’t need to change anything.
⑥
Click [Ok]. You don’t need to restart your computer in Windows XP.
12
Access to the Web Page: http://EDR
EDRor http://default
default Gateway’
EDR-AP’
AP’s Address:1001/index.html
Address
Gateway’s Address:1001/index.html
Address
You can set the functions below through Web Page.
Name
Detailed Name
System Status
System Information
Technical
Specification
Network
Bluetooth
Configuration
System Restart
Description
You can check the status of EDR-AP
You can check the information about firmware, software, hardware of EDRAP
You can configure the network environment for the internet use.
(Choose the network among Static IP, DHCP, ADSL(PPPoE))
You can set the environment for the Bluetooth use
You can configure the Device Name, Security Level, Pin Code, Select
Power Class
Radius
You can configure the Radius authentication method and information
SNMP
You can configure the information for the interoperate with SNMP server
System Mgmt
You can configure the ID, Password of the EDR-AP
Factory Reset
System reset by factory value
Restart EDR-AP
13
14
▌ Network Configuration
①
Select [Configuration], and then choose [Network] to enter the network configuration page.
②
Now select and set the appropriate IP configuration parameters that match your network environment from below.
(a) Static IP
i. Select [Static IP].
ii. Enter the IP, gateway, network mask and DNS address for EDR-AP.
(b) DHCP(Dynamic IP) or Cable modem
i. Select [DHCP].
(c) ADSL(PPPoE)
i. Select [ADSL].
ii. Enter ADSL ID and the password.
15
▌ Bluetooth Configuration
①
Select [Configuration], and then choose [Bluetooth] to enter the network configuration page.
②
When the pop up window requesting ID and Password, type USER ID: admin, Password: 0000.
Title
Device Name
Description
Means the name of the device. Choose the “User Defined” and
type the name you wish.
Default
Value
Use Default
Set the Security Level.
Security Configuration
Level 1 : Security Code(Pin Code) Is not requested.
Level 3
Level 3 : Security Code(Pin Code) Is requested.
Device Configuration
Radio Power Class
Type the Pin Code of EDR-AP.
000000
Select the electric wave of EDR-AP. Class 1 is the strongest
electric wave.
Class 1
16
▌ RADIUS
①
Select [Configuration], and then choose [RADIUS] to enter the network configuration page.
Title
Retransmission
Timeout(sec)
Authentication Server
Authentication
Password
Authentication Port
Number
Description
Define the number of re-transmission times in case of data
failures when interoperate with Radius server.
Set the time interval for Retransmission.
Default
value
5 sec
Set the domain or IP address of Radius Server.
Set the Password to receive the authentication from the Radius
Server.
Set the Port Number of Radius Server.
1812
17
▌ SNMP
①
Select [Configuration], and then choose [SNMP] to enter the network configuration page.
Title
SNMP activation
SNMP Accessibility
SNMP GET/SET
Server Setting
SNMP Community
Setting
Description
Activate the SNMP function.
Check the weather or not to be accessed to the SNMP Server.
Default
Value
enable
Use
Set the domain or IP address of SNMP Server.
RD : Public
Set the authority for Read/Write of SNMP Server interoperate.
WR : private
18
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
▌ NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
▌ Measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
19
▌ ATTENTION(FCC):
This appliance and its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the
antenna and the person for this appliance to satisfy the RF exposure requirements.
20
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2007:01:23 09:57:02Z
Creator Tool                    : Pscript.dll Version 5.0
Modify Date                     : 2007:01:23 18:09:06+09:00
Metadata Date                   : 2007:01:23 18:09:06+09:00
Format                          : application/pdf
Creator                         : kimhansung
Title                           : Microsoft Word - ANYCOM-EDR-AP_ENG_20061110 _4_.doc
Producer                        : AFPL Ghostscript 8.50
Document ID                     : uuid:7d9bab59-d9d7-46e5-b73d-7a70baaaeec5
Instance ID                     : uuid:e5c2fd95-5935-4bd1-830e-c8cc575dd92f
Page Count                      : 21
Author                          : kimhansung

EXIF Metadata provided by EXIF.tools