Code BTA01 Charging Base with Bluetooth for Handheld Barcode Scanner User Manual

Code Corporation Charging Base with Bluetooth for Handheld Barcode Scanner

User manual

English (Default) Universal French German Non-printable ASCIIKeyboard (Crtl + character)Japanese Non-printable ASCII Keyboard(No Leading 0)Keyboard Input (USB)The modem is defaulted to English language keyboards. If you need to communicate in a dierent language requiring a change in keyboard sengs, please scan the appropriate conguraon barcode below, aer connecng to the modem:2 3Once connected, the reader will beep once as conrmaon and the modem’s blue LED light will become solid (Figure 6). If the reader does not connect, the reader will beep four mes in rapid succession.Figure 6Establishing a Bluetooth® Connecon Charging a CR2600A red LED = reader/baery is chargingA green LED = reader/baery is fully charged**Note: In certain reader conguraons, the radio is required to always be on, therefore requiring a constant power draw. In these instances, while the power draw is minimal, the LED light may never turn green when charging a baery aached to a reader.The CR2600 Mountable Palm Cart Charger has an LED to indicate the charging status of reader. Press either trigger buon on the CR2600 and scan the QuickConnect barcode located on the Mountable Palm Cart Charger to establish a Bluetooth connecon between the CR2600 and the computer that the Charger is connected to. (Figure 5) Figure 5Charging Status LEDPlace a CR2600 into the charging bay of the Mountable Palm Cart Charger, facing forward, and down (Figure 7), making sure it is seated rmly into place. Once the charging clips have made contact with the connectors on the reader the charging status LED will light up.Note: Baery ships with approximately 50% baery life. Fully charge baery before use. Approximate charge me is 4 hours.Figure 7Figure 8Charging Status LEDCodeXML® Modem Status LEDCharging Status LEDTrigger BuonsRefer to CR2600 Quick Start Guide and Product Manual for reader specicaons.
www.codecorp.comQuickstart GuideCR2600 Mountable Palm Cart ChargerC008950_01_A111_QuickStart_GuideThe CR2600 Mountable Palm Cart Charger is designed for easy mobile cart integraon. The embedded CodeXML® Modem enables a CR2600 reader to wirelessly transmit, through a Bluetooth® connecon, data to a host device. In addion, the Mountable Palm Cart Charger charges a wireless palm CR2600 while posioning it within easyreach for retrieval.Aach the micro-USB cable provided to the CR2600 Mountable Palm Cart Charger (Figure 2), and plug the USB connector into the USB port on the computer (Figure 3). Once plugged in the charging status LED will ash red (Figure 6).4InstallationFigure 1The Code Reader™ 2600 (CR2600) has been tested for compliance with FCC regulaons and was found to be compliant with all applicable FCC Rules and Regulaons. FCC ID: QQ6-BTA01IC ID: 9966A-BTA01Model #: CRA-A111_01This device complies with part 15 of the FCC rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. Any changes or modicaons not expressly approved by manufacturer could void the user’s authority to operate the equipment. IMPORTANT! Any changes or modicaons not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to the following two condions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaon of thedevice.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitaon est autorisée aux deux condions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’ulisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est suscepble d’en compromere le fonconnement. IMPORTANT! Tous les changements ou modicaons pas expressément approuvés par la pare responsable de la conformité ont pu vider l’autorité de l’ulisateur pour aconer cet équipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separaon between the equipment and receiver.—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.—Consult the dealer or an experienced radio/ TV technician for help.This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du CanadaUS Patent: www.codecorp.com/legal/patents.phpOperang Temperature: -20° to 55° C / -4° to 131° FImportant Note:IncludedMicro-USB to USB CableFigure 2 Figure 3CR2600 MountablePalm Cart ChargerPage ButtonThe CR2600 Mountable Palm Cart Charger is equipped with a page buon. To locate a CR2600 that has a connecon established to the modem, and is within Bluetooth range, simply press the Page buon on the Charger. The reader will then beep. © 2014. Code Corporaon. All Rights Reserved.Page BuonNote: Two M4 Phillips pan head X 6mm threaded length screws are included for installaon.Two M4 Phillips pan head screws are included with each CRA-A111. The screws are designed to t into the threaded brass inserts (Figure 4) found on the back of the charger. Insert and ghten the screws prior to, or aer they are in the posion to the mounng bracket. Once mounted, ghten each screw to ensure the charger is securely aached to the mounng bracket.Figure 4

Navigation menu