Code BTA01 Charging Base with Bluetooth for Handheld Barcode Scanner User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2231763
Application ID	Ga894ADY0Xn0XxiiU1tdbQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	47.11kB (588879 bits)
Date Submitted	2014-04-02 00:00:00
Date Available	2014-04-02 00:00:00
Creation Date	2017-10-23 09:30:57
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-23 09:30:57
Document Title	User manual
Document Creator	Adobe InDesign CC (Windows)

Establishing a Bluetooth® Connecion
Charging Status LED
The CR2600 Mountable Palm Cart Charger has an LED to indicate the charging status of reader.
Press either trigger buton on the CR2600 and scan
the QuickConnect barcode located on the Mountable
Palm Cart Charger to establish a Bluetooth connecion
between the CR2600 and the computer that the Charger
is connected to. (Figure 5)
Charging Status LED
A red LED = reader/batery is charging
A green LED = reader/batery is fully charged*
*Note: In certain reader coniguraions, the radio is required
to always be on, therefore requiring a constant power draw. In
these instances, while the power draw is minimal, the LED light
may never turn green when charging a batery atached to a
reader.
Figure 5
Trigger Butons
CodeXML® Modem Status LED
Figure 8
Once connected, the reader will beep once as
conirmaion and the modem’s blue LED light will
become solid (Figure 6). If the reader does not connect,
the reader will beep four imes in rapid succession.
Keyboard Input (USB)
Figure 6
Charging a CR2600
The modem is defaulted to English language keyboards. If you need to communicate in a
diferent language requiring a change in keyboard seings, please scan the appropriate
coniguraion barcode below, ater connecing to the modem:
English (Default)
Universal
French
German
Charging Status LED
Place a CR2600 into the charging bay of the Mountable Palm
Cart Charger, facing forward, and down (Figure 7), making sure
it is seated irmly into place. Once the charging clips have made
contact with the connectors on the reader the charging status LED
will light up.
Japanese
Note: Batery ships with approximately 50% batery life. Fully
charge batery before use. Approximate charge ime is 4 hours.
Figure 7
Refer to CR2600 Quick Start Guide and Product Manual for reader speciicaions.
Non-printable ASCII Keyboard
(No Leading 0)
Non-printable ASCII
Keyboard (Crtl + character)
Quickstart Guide
Page Button
Page Buton
CR2600 Mountable Palm Cart Charger
The CR2600 Mountable Palm Cart Charger is equipped with
a page buton. To locate a CR2600 that has a connecion
established to the modem, and is within Bluetooth range,
simply press the Page buton on the Charger. The reader will
then beep.
The CR2600 Mountable Palm Cart Charger is designed for easy
mobile cart integraion. The embedded CodeXML® Modem
enables a CR2600 reader to wirelessly transmit, through a
Bluetooth® connecion, data to a host device.
In addiion, the Mountable Palm Cart Charger charges a
wireless palm CR2600 while posiioning it within easy
reach for retrieval.
Important Note:
Figure 1
The Code Reader™ 2600 (CR2600) has been tested for compliance with FCC regulaions and was found to be compliant with all applicable FCC
Rules and Regulaions.
FCC ID: QQ6-BTA01
IC ID: 9966A-BTA01
Model #: CRA-A111_01
Included
This device complies with part 15 of the FCC rules. Operaion is subject to the following two condiions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operaion. Any
changes or modiicaions not expressly approved by manufacturer could void the user’s authority to operate the equipment.
Note: Two M4 Phillips pan
head X 6mm threaded length
screws are included for
installaion.
IMPORTANT! Any changes or modiicaions not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaion is subject to the following two condiions: (1) this device
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaion of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitaion est autorisée
aux deux condiions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’uilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, meme si le brouillage est suscepible d’en comprometre le foncionnement.
IMPORTANT! Tous les changements ou modiicaions pas expressément approuvés par la parie responsable de la conformité ont pu vider
l’autorité de l’uilisateur pour acioner cet équipment.
CR2600 Mountable
Palm Cart Charger
Micro-USB to USB Cable
Installation
Atach the micro-USB cable provided to the CR2600 Mountable Palm Cart Charger (Figure 2),
and plug the USB connector into the USB port on the computer (Figure 3). Once plugged in the
charging status LED will lash red (Figure 6).
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecion against harmful interference in a residenial installaion. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucions, may cause harmful interference
to radio communicaions. However, there is no guarantee that interference will not occur in a paricular installaion. If this equipment does
cause harmful interference to radio or television recepion, which can be determined by turning the equipment of and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaion between the equipment and receiver.
—Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
US Patent: www.codecorp.com/legal/patents.php
Operaing Temperature: -20° to 55° C / -4° to 131° F
www.codecorp.com
Figure 3
Figure 4
Two M4 Phillips pan head screws are included with each CRA-A111. The screws are designed to
it into the threaded brass inserts (Figure 4) found on the back of the charger. Insert and ighten
the screws prior to, or ater they are in the posiion to the mouning bracket. Once mounted,
ighten each screw to ensure the charger is securely atached to the mouning bracket.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada
Figure 2
© 2014. Code Corporaion. All Rights Reserved.
C008950_01_A111_QuickStart_Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:04:01 10:51:19-06:00
Creator                         : Adobe InDesign CC (Windows)
Modify Date                     : 2014:04:01 13:04:39-06:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2014:04:01 13:04:39-06:00
Creator Tool                    : Adobe InDesign CC (Windows)
Instance ID                     : uuid:8ca8fd5f-96bd-4478-9eec-53f46337ad8c
Original Document ID            : adobe:docid:indd:b87e9177-4d02-11dd-8502-e09707736938
Document ID                     : xmp.id:dde41cdb-c80a-f54b-9049-0b74b73a3860
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:45872dde-dae4-e548-b359-a95819bc7c4f
Derived From Document ID        : xmp.did:5fda0e17-8db8-ab43-b2dd-85a8d409cc5c
Derived From Original Document ID: adobe:docid:indd:b87e9177-4d02-11dd-8502-e09707736938
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Windows)
History Changed                 : /
History When                    : 2014:04:01 10:51:19-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools