Cogent Systems BLUECHECK Fingerprint capture/identification device w/BT User Manual MobileID with BlueCheck2 ug
Cogent Systems Inc Fingerprint capture/identification device w/BT MobileID with BlueCheck2 ug
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 716138 |
| Application ID | awTNZKWfZSQRTqoXM1IxMA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 194.31kB (2428937 bits) |
| Date Submitted | 2006-10-16 00:00:00 |
| Date Available | 2006-10-17 00:00:00 |
| Creation Date | 2006-08-09 11:29:04 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2006-10-12 16:40:15 |
| Document Title | MobileID with BlueCheck2_ug.book |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | eso |
LAFIS MobileID™ (with Cogent BlueCheck™ Capture Device) User Guide - Version 1.1 Cogent Document # IG-EXT-UG-572-0.00(1)...©2006 Cogent Systems, Inc. All rights reserved. This document contains proprietary and confidential information belonging to Cogent Systems, Inc. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any human or computer language, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without the prior written permission of the copyright owner, Cogent Systems, Inc. MobileID™ is the trademark of Cogent Systems, Inc. All trademarks and tradenames are the property of their respective owners. This guide is subject to change without notice. Document Revision History Document Version # Date Comments 1.0 05/10/2006 Initial draft written. 1.1 08/09/2006 Updated to include the new BlueCheck fingerprint capture device. Chapter 1: Overview ..................................................................................................1 MobileID System Features ........................................................................... 1 System Hardware Overview: The Cogent BlueCheck™ Fingerprint Capture Device and Pocket PC Personal Digital Assistant Device ........................... 2 BlueCheck Capture Device Features ........................................................... 3 BlueCheck Menu Options ............................................................................ 5 System Hardware Overview: Pocket PC Personal Digital Assistant ............ 6 Chapter 2: Key Terms ...............................................................................................7 Chapter 3: Performing the Initial Setup of MobileID (for Administrators only) ...9 Pairing the Bluetooth Enabled Devices ........................................................ 9 Chapter 4: Getting Started ......................................................................................17 Logging In .................................................................................................. 17 Turning on the BlueCheck Capture Device ................................................ 19 Calibrating the BlueCheck Capture Device ................................................ 19 Chapter 5: Performing a Quick Search Identification ..........................................21 Chapter 6: Performing an Identification Search ...................................................27 Chapter 7: Viewing Transaction Information ........................................................35 Viewing the Identification Information Returned by LAFIS ...................36 Viewing the Demographic Information Submitted to LAFIS .................36 Viewing the Prints Submitted to LAFIS ................................................37 Viewing LAFIS’s Response to the Identification Request ....................38 Returning to the Transaction Queue Window ......................................39 Chapter 8: Logging Out ..........................................................................................41 Appendix A: Configuring MobileID (for Administrators only) ................................43 • • • i • • • Table of Contents Table of Contents Chapter 1 Overview •••••• MobileID™ is an easy-to-use, wireless, automated, client/server fingerprint identification system for law enforcement officers and other personnel. Running on a commercially-available Personal Digital Assistant (PDA) device such as Pocket PC®, Cogent’s MobileID software delivers the power of an Automated Fingerprint Identification System (AFIS) in a portable handheld format. When combined with BlueCheck™, Cogent’s latest portable capture device, MobileID allows users to quickly and easily perform in-the-field fingerprint identifications. You can simply have a subject place his/her finger onto a fingerprint capture device for fast and easy identification. The software provides you with an assortment of tools for viewing, identifying, and saving records, allowing a one-to-one comparison of existing fingerprint records to verify identity. MobileID is not stand alone software; it works together with the LAFIS™ (LACRIS Automated Fingerprint Identification System) database, accessible from a PDA in the field. MobileID System Features MobileID system features include: • capturing fingerprint images; • performing searches against the CAFIS tenprint database; • identifying a subject; and • viewing and entering associated demographic information. Overview - Cogent Systems, Inc. Proprietary Information • • • • • • System Hardware Overview: The Cogent BlueCheck™ Fingerprint Capture Device and Pocket PC Personal Digital Assistant Device Utilizing Bluetooth technology, BlueCheck captures high-quality, 500 dpi images. These images can be wirelessly transferred to the MobileID Pocket PC PDA for NIST packaging and submission to LAFIS over a wireless network. Submissions and responses are sent and received via standard wireless technology. Figure 1-1 BlueCheck Capture Device The specifications for the BlueCheck capture device are: • Dimensions: • Height: 4.45” • Width: 1.69” • Depth: 0.87” • Weight: 3 oz. • Resolution: 500 dpi • Power Supply: Li-Ion 3.7V 900mAh • Range: 5-10 meters, depending on operating environment • • • Overview - Cogent Systems, Inc. Proprietary Information • • • Figure 1-2 describes the features of the BlueCheck capture device. Battery Indicator Fingerprint Sensor Bluetooth Connection Indicator Power Indicator Sensor Indicator Blue Button Green Button On/Off Button Display Panel BlueCheck Capture Device Features BlueCheck Capture Device Features Figure 1-2 BlueCheck Capture Device Features Feature Description Fingerprint Sensor Captures the subject’s fingerprint Green Button Used to begin the fingerprint capture process and to indicate missing/bandaged fingers On/Off Button Used to turn the BlueCheck device on and off Blue Button Used to cancel the fingerprint capture process and to calibrate the capture device Display Panel Displays messages related to the fingerprint capture process Overview - Cogent Systems, Inc. Proprietary Information • • • 3 • • • Feature Description Battery Indicator The Battery Indicator will display one of the following: • When the Battery Indicator is solid green, the battery is over 50% charged. • When the Battery Indicator is flashing green, the battery is 50% charged or less. • When the Battery Indicator is flashing red, the battery’s charge is almost completely depleted. Immediate re-charging is required. Bluetooth Connection Indicator The Bluetooth Connection Indicator will display one of the following: • When the Bluetooth Connection Indicator is solid blue, the device is connected to MobileID. • When the Bluetooth Connection Indicator is flashing blue, the device is not connected to MobileID. Power Indicator When the Power Indicator is red, the power is on. Sensor Indicator When the Sensor Indicator is flashing amber, the Fingerprint Sensor is ready for fingerprint capture. • • • Overview - Cogent Systems, Inc. Proprietary Information • • • The Green and Blue buttons are used to select menu options from the Display Panel. The following table provides descriptions of menu options that can be selected. Option Description OK Press the Green button when the L I VE C A PTU R E message is displayed to select OK and begin the fingerprint capture process. NEXT • Press the Blue button when the L I VE C A PTU R E message is displayed to select NEXT and calibrate the device. BlueCheck Menu Options BlueCheck Menu Options For more instructions on calibrating the device, please refer to “Calibrating the BlueCheck Capture Device” on page 19 . • Press the Blue button when the C A L I B R ATE message is displayed to select NEXT and exit out of the calibration procedure. MIS Press the Green button when the R T h u m b P l e a s e or L T h u m b P l e a s e message is displayed to select MIS and designate a finger as missing. ESC Press the Blue button when the R T h u m b P l e a s e or L T h u m b P l e a s e message is displayed to select ESC and exit out of the fingerprint capture procedure. Overview - Cogent Systems, Inc. Proprietary Information • • • 5 • • • System Hardware Overview: Pocket PC Personal Digital Assistant MobileID runs on the Audiovox XV6700 Pocket PC PDA. Images are wirelessly transferred to the MobileID Pocket PC PDA from the BlueCheck capture device for NIST packaging and submission to LAFIS over a wireless network. Figure 1-3 Pocket PC PDA The specifications for the Pocket PC PDA are: • Processor: 416 Mhz Intel PXA270 • Memory: 64 MB RAM, 128 MB Flash ROM • Operating System: Microsoft Windows Mobile Pocket PC • Dimensions: 4.25” (H) x 2.35” (W) x 0.94” (D) • Weight: 6.5 oz. • Display: 2.8”, 64,000 color TFT LCD, touch-sensitive screen, 240x320 pixels, back-light LEDs • Removable Memory Slot: MiniSD Card • Camera: 1.3 Mpixels with 8x digital zoom and flash • Keyboard: Sliding QWERTY keyboard • Power Supply: Li-Ion 3.7 V 900 mAh • • • Overview - Cogent Systems, Inc. Proprietary Information • • • Chapter 2 Key Terms •••••• The following table provides definitions of some key terms that are used throughout this Guide. Term Description AFIS Automated Fingerprint Identification System Bluetooth Wireless technology that enables the BlueCheck device to connect to the MobileID application Hit A determination that a print stored in the CAFIS database may match the print input for a search. CAFIS matches prints by comparing the attribute maps of each of the prints stored in the database with the attribute map of the search print, and assigns them a score that ranks the degree of similarity between the search print and the file prints. LACRIS Los Angeles County Regional Identification System LAFIS LACRIS Automated Fingerprint Identification System Match A print in the CAFIS database that is known to match a print input into CAFIS for a search. Before the examiner confirms the match, the print is considered a candidate or potential hit (See Hit). PDA Personal Digital Assistant - handheld computer device TOT Type of Transaction Chapter 2 - Cogent Systems, Inc. Proprietary Information • • • • • • Notes • • • Key Terms - Cogent Systems, Inc. Proprietary Information • • • Chapter 3 Performing the Initial Setup of MobileID (for Administrators only) •••••• In order for the two Bluetooth-enabled devices to communicate with each other, you must perform Bluetooth pairing. When this is accomplished, the two devices join what is called a trusted pair relationship. When one device recognizes another device in an established trusted pair, each device automatically accepts communication, bypassing the discovery and authentication process that normally happen during Bluetooth interactions. Pairing the Bluetooth Enabled Devices The devices are paired after the Pocket PC PDA locates the BlueCheck capture device. To pair the Pocket PC PDA with the BlueCheck capture device, follow these steps: Use the stylus to tap on the Start button, located on the top-left corner of the Pocket PC PDA screen. A drop-down menu will be displayed. Select Settings from the drop-down menu. The Settings window will be displayed, an example of which is shown in Figure 3-1. Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • • • • • • Figure 3-1 Settings Window Tap the Connections tab. The Connections subwindow will be displayed, an example of which is shown in Figure 3-2. Figure 3-2 Connections Subwindow Double-tap on the Bluetooth icon. The Bluetooth subwindow will be displayed, an example of which is shown in Figure 3-3. • • 10 •• Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary • • 5 Ensure that the Turn on Bluetooth checkbox is selected. Tap the Devices tab. The (Bluetooth) Devices subwindow will be displayed, an example of which is shown in Figure 3-4. Pairing the Bluetooth Enabled Devices Figure 3-3 Bluetooth Subwindow Figure 3-4 (Bluetooth) Devices Subwindow Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • • • 11 • • • 7 Turn on the BlueCheck capture device by holding down the On/Off button until the BlueCheck device turns on. The Power Indicator will display a blinking red light and the L I V E C A PT U R E message will be displayed on the Display Panel. Press the Blue button (located above NEXT on the Display Panel) two times. The DE V I C E PA I R message will be displayed on the Display Panel. Press the Green button (located above OK on the Display Panel). The Bluetooth Connection indicator will display a blinking blue light, the Power Indicator will display a blinking red light and the PA I R I N G message will be displayed on the Display Panel. 10 Tap New Partnership... to scan for other Bluetooth devices. After the Pocket PC PDA has detected all of the Bluetooth enabled devices in the immediate area (including the BlueCheck capture device), the Select a Bluetooth Device subwindow will be displayed. An example is shown in Figure 3-5. Figure 3-5 Select a Bluetooth Device Subwindow 11 Select the BlueCheck device containing the prefix BC. 12 Tap Next. The Enter Passkey subwindow will be displayed, an example of which is shown in Figure 3-6. • • 12 •• Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary • • 13 Enter the passkey in the Passkey field. Note: The default passkey is 1234. Pairing the Bluetooth Enabled Devices Figure 3-6 Enter Passkey Subwindow 14 Tap Next. The Partnership Settings subwindow will be displayed, an example of which is shown in Figure 3-7. Figure 3-7 Partnership Settings Subwindow Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • • • 13 • • • 15 Ensure that the Serial Port checkbox is selected. 16 Tap Finish. The (Bluetooth) Devices subwindow will be displayed, an example of which is shown in Figure 3-8. Figure 3-8 (Bluetooth) Devices Subwindow 17 Tap the Keyboard icon, located on the bottom portion of the window. The keyboard is no longer displayed. 18 Tap the COM Ports tab. The (Bluetooth) COM Ports subwindow will be displayed, an example of which is shown in Figure 3-9. • • 14 •• Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary • • 19 Tap New Outgoing Port. The Add a Device subwindow will be displayed, an example of which is shown in Figure 3-10. Pairing the Bluetooth Enabled Devices Figure 3-9 (Bluetooth) COM Ports Subwindow Figure 3-10 Add a Device Subwindow 20 Ensure that the BlueCheck device is selected. 21 Tap Next. The (Bluetooth) Port subwindow will be displayed, an example of which is shown in Figure 3-11. Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • • • 15 • • • Figure 3-11 (Bluetooth) Port Subwindow 22 Select COM6 from the Port drop-down menu. 23 Tap Finish. The BlueCheck capture device has now been paired to the Pocket PC PDA. The (Bluetooth) COM Ports subwindow will be displayed, an example of which is shown in Figure 3-12. Figure 3-12 (Bluetooth) COM Ports Subwindow 24 Tap ok, located in the top-right corner of the window. 25 Tap the X button, located in the top-right corner of the window. • • 16 •• Performing the Initial Setup of MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary • • Chapter 4 Getting Started •••••• Logging In To log into MobileID, follow these steps: Use the stylus to tap on the Start button, located on the top-left corner of the Pocket PC PDA screen. A drop-down menu will be displayed. Select MobileIDHost from the drop-down menu. The Login window will be displayed, an example of which is shown in Figure 4-1. Figure 4-1 Login Window Tap on the arrow in the top field. Getting Started - Cogent Systems, Inc. Proprietary Information • • • 17 • • • 4 Select your user name from the list of approved users in the drop-down menu. Enter your password in the Password field. Tap Login. The MobileID Main Menu window will be displayed, an example of which is shown in Figure 4-2. Figure 4-2 MobileID Main Menu Window Note: From the MobileID Main Menu window, you can choose whether to perform a quick search identification (IDN - Quick Search) or a standard identification search (IDN - Identification Transactions). The procedures for performing a quick search identification are described in Chapter 5. The procedures for performing a standard identification search are described in Chapter 6. • • 18 •• Getting Started - Cogent Systems, Inc. Proprietary Information • • To turn on the BlueCheck capture device, hold down the On/Off button until the BlueCheck device turns on. The Power Indicator will turn red, and the L I V E C A PT U R E message will be displayed on the Display Panel. In addition, the Bluetooth Connection Indicator will turn solid blue when the device has connected to MobileID. You will not be able to send any captured fingerprint images to MobileID until the Bluetooth Connection Indicator has turned solid blue. For more information about connecting your device to MobileID via Bluetooth, contact your System Administrator. Note: If the BlueCheck device is turned on before launching the MobileID application, it may take up to 20 seconds to establish a Bluetooth connection after the application is started. Calibrating the BlueCheck Capture Device If the BlueCheck capture device requires calibration (e.g., it is being used for the first time), follow these steps: Ensure that the BlueCheck capture device is turned on. For instructions on turning on the BlueCheck capture device, please refer the previous section. Press the Blue button (located above NEXT on the Display Panel). The message C A L I B R AT E will be displayed on the Display Panel. Turning on the BlueCheck Capture Device Turning on the BlueCheck Capture Device Note: If desired, you may exit from the calibration procedure at this point by pressing the Blue button (located above NEXT on the Display Panel). Press the Green button (located above OK on the Display Panel). The message C a l i b r a t i n g . . . will be displayed on the Display Panel. After approximately 5-10 seconds, the S u c c e s s message will be displayed momentarily on the Display Panel. The C A L I B R AT E message will be redisplayed on the Display Panel, and the calibration procedure will be complete. Getting Started - Cogent Systems, Inc. Proprietary Information • • • 19 • • • Notes • • 20 •• Getting Started - Cogent Systems, Inc. Proprietary Information • • Chapter 5 Performing a Quick Search Identification •••••• This chapter describes the procedure for performing a quick search identification using a Cogent BlueCheck capture device and the Pocket PC PDA. Note: Your MobileID system may be configured to capture thumbprints or a different pair of fingers. In the following description, the procedure for capturing a subject’s thumbprints is used as an example. To perform a quick search identification, follow these steps: From the Pocket PC PDA, tap the IDN - Quick Search button (located in the MobileID Main Menu window). The Transaction Queue window will be displayed, an example of which is shown in Figure 5-1. Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information • • • 21 • • • Figure 5-1 Transaction Queue Window Ensure that the BlueCheck capture device is turned on. For instructions on turning on the BlueCheck capture device, please refer to “Turning on the BlueCheck Capture Device” on page 19. Note: The Green and Blue buttons are used to select menu options from the Display Panel during the fingerprint capture procedure. For more information about BlueCheck menu options, please refer to “BlueCheck Menu Options” on page 5. Wait until the BlueCheck capture device is connected to the Pocket PC PDA. When the BlueCheck capture device is connected, the status displayed in the BlueCheck Status field of the Pocket PC PDA will change from L is t e n i n g to C o n n e c t e d . From the Pocket PC PDA, tap the New Idn button (located on the top of the Transaction Queue window). • • 22 •• Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information • • From the BlueCheck capture device, press the Green button (located above OK on the Display Panel). The message R T h u m b P l e a s e will be displayed on the Display Panel. Note: You may exit from the fingerprint capture process at any time by pressing the Blue button. Depending on whether the subject’s right thumb is missing/damaged, take one of the following actions: • If the right thumb is missing/damaged, press the Green button (located above MIS on the Display Panel). • If the right thumb is not missing/damaged, have the subject place his/her right thumb on the fingerprint sensor. The subject’s right thumbprint will be captured, and the message F in g e r C a p t u r e d will be displayed on the Display Panel of the BlueCheck capture device. After a few seconds, the message L T h u m b P l e a s e will be displayed on the Display Panel of the BlueCheck capture device. The right thumb print will be displayed on the Pocket PC PDA, an example of which is shown in Figure 5-2. Performing a Quick Search Identification Figure 5-2 Captured Right Thumb Print Image Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information • • • 23 • • • Note: If you are not in the BlueCheck device’s Bluetooth range, its attempt to communicate with MobileID will time out, and the message: NO CONN RESEND? will be displayed on the Display Panel. If this message is displayed, try moving the BlueCheck device closer to the Pocket PC PDA on which MobileID is installed. Depending on whether the subject’s left thumb is missing/damaged, take one of the following actions: • If the left thumb is missing/damaged, press the Green button (located above MIS on the Display Panel). • If the left thumb is not missing/damaged, have the subject place his/her left thumb on the fingerprint sensor. The subject’s left thumbprint will be captured, and the message F in g e r C a p t u r e d will be displayed on the Display Panel. The prints are sent to LAFIS and the quick search identification transaction will be displayed in the Transaction Queue window of the Pocket PC PDA, an example of which is shown in Figure 5-3. Figure 5-3 The New Quick Search Identification Transaction Is Displayed in the Queue • • 24 •• Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information • • 8 If a possible hit against the tenprint database is found on LAFIS, the BlueCheck device will beep, and the message P o s s i b l e h it ! will be displayed on the Display Panel of the BlueCheck capture device. If no candidates are found or only candidates with scores below the designated threshold are found on LAFIS, the message N o h i t will be displayed on the Display Panel of the BlueCheck capture device. The results of the LAFIS search are displayed on the MobileID application of the Pocket PC PDA. An example of the results returned from LAFIS is displayed in Figure 5-4. Performing a Quick Search Identification Note: For a quick search identification, MobileID is configured to automatically send the transaction to LAFIS. Figure 5-4 Results of the Quick Search Identification Note: A Hit will be indicated by a red square to the left of the transaction number. In addition, the subject’s name will be displayed in the Status column. A Non-Hit will be indicated by a green square to the left of the transaction number. In addition, No Hit will be displayed in the Status column. Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information • • • 25 • • • 9 To return to the MobileID Main Menu window, tap Exit. A dialog box will be displayed. 10 Tap Yes. The MobileID Main Menu window will be displayed. • • 26 •• Performing a Quick Search Identification - Cogent Systems, Inc. Proprietary Information • • Chapter 6 Performing an Identification Search •••••• This chapter describes the procedure for performing a standard identification search using a Cogent BlueCheck capture device and the Pocket PC PDA. Note: Your MobileID system may be configured to capture thumbprints or a different pair of fingers. In the following description, the procedure for capturing a subject’s thumbprints is used as an example. To perform an identification search, follow these steps: From the Pocket PC PDA, tap the IDN - Identification Transactions button (located in the MobileID Main Menu window). The Transaction Queue window will be displayed, an example of which is shown in Figure 6-1. Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • • 27 • • • Figure 6-1 Transaction Queue Window Ensure that the BlueCheck capture device is turned on. For instructions on turning on the BlueCheck capture device, please refer to “Turning on the BlueCheck Capture Device” on page 19. Note: The Green and Blue buttons are used to select menu options from the Display Panel during the fingerprint capture procedure. For more information about BlueCheck menu options, please refer to “BlueCheck Menu Options” on page 5. Wait until the BlueCheck capture device is connected to the Pocket PC PDA. When the BlueCheck capture device is connected, the status displayed in the BlueCheck Status field of the Pocket PC PDA will change from L is t e n i n g to C o n n e c t e d . From the Pocket PC PDA, tap the New Idn button (located on the top of the Transaction Queue window). • • 28 •• Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • From the BlueCheck capture device, press the Green button (located above OK on the Display Panel). The message R T h u m b P l e a s e will be displayed on the Display Panel. Note: You may exit from the fingerprint capture process at any time by pressing the Blue button. Depending on whether the subject’s right thumb is missing/damaged, take one of the following actions: • If the right thumb is missing/damaged, press the Green button (located above MIS on the Display Panel). • If the right thumb is not missing/damaged, have the subject place his/her right thumb on the fingerprint sensor. The subject’s right thumbprint will be captured, and the message F in g e r C a p t u r e d will be displayed on the Display Panel of the BlueCheck capture device. After a few seconds, the message L T h u m b P l e a s e will be displayed on the Display Panel of the BlueCheck capture device. The right thumb print will be displayed on the Pocket PC PDA, an example of which is shown in Figure 6-2. Performing an Identification Search Figure 6-2 Captured Right Thumb Print Image Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • • 29 • • • Note: If you are not in the BlueCheck device’s Bluetooth range, its attempt to communicate with MobileID will time out, and the message: NO CONN RESEND? will be displayed on the Display Panel. If this message is displayed, try moving the BlueCheck device closer to the Pocket PC PDA on which MobileID is installed. Depending on whether the subject’s left thumb is missing/damaged, take one of the following actions: • If the left thumb is missing/damaged, press the Green button (located above MIS on the Display Panel). • If the left thumb is not missing/damaged, have the subject place his/her left thumb on the fingerprint sensor. The subject’s left thumbprint will be captured, and the message F in g e r C a p t u r e d will be displayed on the Display Panel. The left thumb print will be displayed on the Pocket PC PDA. From the Pocket PC PDA, tap the Info button (located on the top of the Transaction Queue window). The Info data entry subwindow will be displayed, an example of which is shown in Figure 6-3. Figure 6-3 Info Data Entry Subwindow • • 30 •• Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • Tap the Keyboard icon, located on the bottom portion of the window. The keyboard is displayed. 10 Enter the general information about the identification search transaction in the fields of the Info subwindow. Note: In the data entry subwindows, the required fields for your agency are indicated in yellow. 11 Tap the Demo. button (located on the top of the Transaction Queue window). The Demographics data entry subwindow will be displayed, an example of which is shown in Figure 6-4. Performing an Identification Search Figure 6-4 Demographics Data Entry Subwindow 12 Enter the subject’s demographic information in the fields of the Demographics subwindow. 13 Tap the Mugshot button (located on the top of the Transaction Queue window). The Mugshot capture subwindow will be displayed, an example of which is shown in Figure 6-5. Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • • 31 • • • Figure 6-5 Mugshot Capture Subwindow 14 Tap the Take Mugshot Photo button. The mugshot capture window will become active. 15 Rotate the Pocket PC PDA to the left and position the PDA camera so that the subject’s face is centered in the mugshot capture window. 16 Press the camera button on the top edge of the Pocket PC PDA device to capture the subject’s mugshot photo. An example is shown in Figure 6-6. Figure 6-6 Preview of Subject’s Mugshot • • 32 •• Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • 18 Tap the icon on the bottom-left of the window (below the word Select) to accept the subject’s mugshot photo. The subject’s mugshot photo will be displayed in the Mugshot capture subwindow. An example is shown in Figure 6-7. Performing an Identification Search 17 If necessary, tap the camera icon on the bottom-right of the window (below the word Select) to retake the photo. Figure 6-7 Subject’s Mugshot Photo 19 After you have finished capturing the mugshot photo, you may send the transaction to LAFIS. 20 If a possible hit against the tenprint database is found on LAFIS, the BlueCheck device will beep, and the message P o s s i b l e h it ! will be displayed on the Display Panel of the BlueCheck capture device. If no candidates are found or only candidates with scores below the designated threshold are found on LAFIS, the message N o h i t will be displayed on the Display Panel of the BlueCheck capture device. The results of the LAFIS search are displayed on the MobileID application of the Pocket PC PDA. An example of the results returned from LAFIS is displayed in Figure 6-8. Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • • 33 • • • Figure 6-8 Results of the Quick Search Identification Note: A Hit will be indicated by a red square to the left of the transaction number. In addition, the subject’s name will be displayed in the Status column. A Non-Hit will be indicated by a green square to the left of the transaction number. In addition, No Hit will be displayed in the Status column. 21 To return to the MobileID Main Menu window, tap Exit. A dialog box will be displayed. 22 Tap Yes. The MobileID Main Menu window will be displayed. • • 34 •• Performing an Identification Search - Cogent Systems, Inc. Proprietary Information • • Chapter 7 Viewing Transaction Information •••••• You can view the fingerprint images and demographic information for any transaction in the Transaction Queue window by simply highlighting the transaction in the queue and tapping the View button. When you do so, the Transaction View window will be displayed for that transaction, an example of which is shown in Figure 7-1. Figure 7-1 Sample Transaction View Window From the Transaction View window, you can view the subject’s fingerprint images and demographic information. Viewing Transaction Information - Cogent Systems, Inc. Proprietary Information • • • 35 • • • Viewing the Identification Information Returned by LAFIS From the Transaction View window, tap the Details button. Information regarding the subject’s Hit/No Hit status and identity (if available) will be displayed. An example is shown in Figure 7-2. Figure 7-2 View the Identification Information Returned by LAFIS Viewing the Demographic Information Submitted to LAFIS From the Transaction View window, tap the Submitted button. The demographic information submitted (or waiting to be submitted) to LAFIS will be displayed. An example is shown in Figure 7-3. • • 36 •• Viewing Transaction Information - Cogent Systems, Inc. Proprietary Information • • Viewing Transaction Information Figure 7-3 View the Demographic Information Submitted to LAFIS Viewing the Prints Submitted to LAFIS From the Transaction View window, tap the Prints button. The fingerprints submitted (or waiting to be submitted) to LAFIS will be displayed. An example is shown in Figure 7-4. Figure 7-4 View the Fingerprints Submitted to LAFIS Viewing Transaction Information - Cogent Systems, Inc. Proprietary Information • • • 37 • • • Viewing LAFIS’s Response to the Identification Request From the Transaction View window, tap the Response button. LAFIS’s response to the identification request will be displayed. An example is shown in Figure 7-5. Figure 7-5 View LAFIS’s Response to the Identification Request Viewing the Mugshot Photo Submitted to LAFIS From the Transaction View window, tap the Mugshot button. The mugshot photo submitted (or waiting to be submitted) to LAFIS will be displayed. An example is shown in Figure 7-6. • • 38 •• Viewing Transaction Information - Cogent Systems, Inc. Proprietary Information • • Viewing Transaction Information Figure 7-6 View the Mugshot Photo Submitted to LAFIS Returning to the Transaction Queue Window To return to the Transaction Queue window, tap the ok button. Viewing Transaction Information - Cogent Systems, Inc. Proprietary Information • • • 39 • • • Notes • • 40 •• Viewing Transaction Information - Cogent Systems, Inc. Proprietary Information • • Chapter 8 Logging Out •••••• To log out of MobileID, follow these steps: Tap the Exit button. A dialog box will be displayed. Tap the Yes button. The MobileID Main Menu window will be displayed. Tap the Exit button. A dialog box will be displayed. Tap the Yes button. The Login window will be displayed. Tap the Exit button. You will be logged out of MobileID. Logging Out - Cogent Systems, Inc. Proprietary Information • • • 41 • • • Notes • • 42 •• Logging Out - Cogent Systems, Inc. Proprietary Information • • Appendix A Configuring MobileID (for Administrators only) •••••• To configure MobileID, follow these steps: Use the stylus to tap on the Start button, located on the top-left corner of the Pocket PC PDA screen. A drop-down menu will be displayed. Select MIDConfigure from the drop-down menu. The MobileID Host Configuration window will be displayed, an example of which is shown in Figure A-1. Figure A-1 MobileID Host Configuration Window Enter the configuration access password in the Configuration Access Password field. Configuring MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • • • 43 • • • Note: The default configuration access password is qwerty. Tap Login. The configuration information for MobileID will be displayed. An example is shown in Figure A-2. Figure A-2 MobileID Host Configuration Tap User Management / Passwords. The User Configuration window will be displayed. An example is shown in Figure A-3. Figure A-3 User Configuration Window • • 44 •• Configuring MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • • To add a new MobileID user account, follow these steps: 6a Enter the new user name in the first field below the User Management/Passwords portion of the window. 6b Enter the new user password in the second field below the User Management/Passwords portion of the window. 6c Enter the new user password again in the third field below the User Management/Passwords portion of the window. An example is shown in Figure A-4. Figure A-4 Creating a New User Account 6d Tap the Add button. A dialog box is displayed. 6e Tap the Close button. The dialog box is no longer displayed. 6f Tap the Set button. The configuration information for MobileID will be displayed. An example is shown in Figure A-5. Configuring MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information Configuring MobileID (for Administrators only) • • • 45 • • • Figure A-5 MobileID Host Configuration 6g Tap the Save button. The MobileID Host Configuration window is displayed, an example of which is shown in Figure A-6. Figure A-6 MobileID Host Configuration Window 6h Tap the Exit button. You will be exited from the MobileID configuration application. • • 46 •• Configuring MobileID (for Administrators only) - Cogent Systems, Inc. Proprietary Information • •
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 50 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:9afcd22a-113a-410c-9575-53d5a084d632 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2006:10:12 16:40:15+08:00 Create Date : 2006:08:09 11:29:04-07:00 Metadata Date : 2006:10:12 16:40:15+08:00 Document ID : uuid:7cd1f5ef-925a-43ee-b614-5f65dd9230c8 Instance ID : uuid:d9376ac1-d3d1-4c44-8125-d2e006ac2132 Format : application/pdf Title : MobileID with BlueCheck2_ug.book Creator : eso Author : esoEXIF Metadata provided by EXIF.tools