Cogent Systems MI3C Mobile Ident IIIc User Manual Instruction for Mobile Ident IIIc Mi3c

Download:
Mirror Download [FCC.gov]
Document ID	1147461
Application ID	vKRxuMEUikQDSIcSL548SA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.34kB (1079280 bits)
Date Submitted	2009-07-30 00:00:00
Date Available	2009-07-30 00:00:00
Creation Date	2009-07-30 09:12:33
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2009-07-30 09:13:18
Document Title	Instruction for Mobile Ident IIIc (Mi3c)
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	erin

COGENT SYSTEMS
Instruction for Mobile Ident IIIc (Mi3c)
2009‐6‐29
Cogent Systems
Table of Content
1. Power On Mobile Ident IIIc (Mi3c)…………………………………………………………..3
2. Manual Check…………………………………………………………………………………………...4
2.1. Memory……………………………………………………………………………………………......4
2.2. Display……………………………………………………………………………………………….......5
2.3. Screen………………………………………………………………………………………………........5
2.4. Key……………………………………………………………………………………………………………6
2.5. Magcard…………………………………………………………………………………………………..6
2.5.1．Swipe card…………………………………………………………………………………….7
2.5.2. Contactless Card…………………………………………………………………………..7
2.5.3. ICCARD…………………………………………………………………………………………8
2.6. Voice………………………………………………………………………………………………………..8
2.7. VibratMotor……………………………………………………………………………………………..9
2.8. Finger Adjust…………………………………………………………………………………………….9
2.9. Finger Camera…………………………………………………………………………………………..9
2.10. Facial Camera………………………………………………………………………………………..10
2.11. Power…………………………………………………………………………………………………….10
2.12. WIFI……………………………………………………………………………………………………….11
2.13. GPS………………………………………………………………………………………………………..11
2.14. GPRS…………………………………………………………………………………………………………..12
2.15. Bluetooth……………………………………………………………………………………………………12
2.16. Barcode………………………………………………………………………………………………….13
3. Photo…………………………………………………………………………………………………………..15
4. Settings………………………………………………………………………………………………………..15
4.1. Volume……………………………………………………………………………………………………….16
4.2. Date……………………………………………………………………………………………………………16
4.3. Screen Calibration………………………………………………………………………………………17
4.4. Fingerprint Calibration……………………………………………………………………………….17
4.5. LCD…………………………………………………………………………………………………………….18
5. Identify…………………………………………………………………………………………………………..18
5.1. Enroll……………………………………………………………………………………………………………18
5.2. Search………………………………………………………………………………………………………….20
Cogent Systems
1. Power On Mobile Ident IIIc (Mi3c)
Press power button to power on the device.
Power
Button
Login page will show up once the device is powered on. Enter user name and
password (Test Demo: Username‐Cogent, Password‐3259600), click Login to go
into the Front Page (Fig. 1)
Fig. 1
Cogent Systems
2. Manual Check
Click Manual Check in Front Page, MobileID II Test page will show up. MobileID II
Test page is the main page of Manual Check.
2.1. Memory
Click Memory, Memory Check dialogue will pop up. Click Start, it will
calculate the memory disk automatically. After finishing memory calculation,
click Quit (Fig. 2.1).
Fig.2.1
Cogent Systems
2.2.
Display
Click Display and get into it. Click Color, the screen will turn to red, blue,
white and black automatically. After that it will go back to Display page.
Adjust backlight by using BackLight Adjust Bar. Click OK to return to
MobileID II Test page if there is no error.
2.3. Screen
Click Screen and get into Touchscreen Check page. Click anywhere on the
screen (exclude OK and Fault) and get into the blank page. Write anything
you wish to write, check the fluency of the touch screen, then press cancel
button (power button) back to the Touchscreen Check page, click OK to
return to the manual check page.
Cogent Systems
2.4. Key
Click Key, Key Check dialogue will pop up. Power button (cancel button) is the
right top key and OK button is the left top key. The interface will show the
corresponding action when press cancel button and OK button. Press OK
button, Left top key down will pop up, loosen it, Left top key up will pop up.
Then use the same method to check cancel button. Click OK if it pass the test,
click Fault if it is failed.
2.5. Magcard
Click Magcar and get into it. Three kinds of card testing is included: Swipe
Card, Contactless Card and ICCARD (test tools include one swipe card, two
kinds of contactless card, one IC card, one swipe card reader and one
contactless card and IC card reader). Please refer to Fig. 2.5.
Cogent Systems
Fig.2.5
2.5.1. Swipe Card
Install the swipe card reader on the back of device. Click Swipe Card
and go to the test page. Swipe the magcard on the swipe card
module, there should be three rows of information of the card
showing in the blank box (Fig.2.5.1).
Three rows of card’s
information will be shown
here
Fig.2.5.1
2.5.2. Contactless Card
Install the contactless and IC card reader, put the Mifare and Desfire
card individually in front of the reader, the distance between them
and reader should be within 4‐4.5cm and 1.5‐2cm. Click writing area,
keypad will pop up, write information items in writing area, input
item quantity in the numeric area. For example, enter ‘123’ in writing
area. Information ‘123’ is made of 3 individual items, then in numeric
area, it should be ‘3’. Please note that the quantity number in
numeric area must no more than the quantity of information items.
Please refer to Fig. 2.5.2.
Cogent Systems
Writing area
Numeric area
Fig.2.5.2
2.5.3. ICCARD
Insert IC card into the IC card reader, click ICCARD, test procedure is
the same as contactless card.
2.6. Voice
Click Voice and get into it. Adjust voice by adjusting the voice bar.
Cogent Systems
2.7. VibratMotor
Click VibratMotor and get into it. Press Start, the device will be vibrated,
press Stop, it will stop to vibrate.
2.8. Finger Adjust
Click FingerAdjust and get into Camera Adjust page. Clean the fingerprint
sensor, then click start to adjust the camera. Click OK on the pop up
dialogue after adjusting carema.
2.9.
Finger Camera
Click FingerCamera and get into Finger Check page. Put your finger in the
fingerprint sensor, click Capture to capture the fingerprint, click Save to
save it. Connect the Mi3c to PC to check the fingerprint image quality.
Cogent Systems
2.10.
Facial Camera
Click FacialCamera to get into Facial Check page. Click Capture to
capture the image, click Save to save the image. Connect the device to
PC to check the image.
2.11.
Power
Click Power to get into Power Check page. Select wireless you wish to
open. To open wireless, you can also go into Wireless page in Front page.
In Power Check page, you can also check the main and backup battery.
Note: Cannot open GPS, Bluetooth, Wifi and GPRS together. When you
wish to use one of the wireless, you have to power off other wireless
module.
10
Cogent Systems
2.12.
WIFI
Go into Power Check page or Wireless page to power on the Wifi
module. Make sure other wireless modules are power off. Then Click
WIFI in Manual Check and get into Wifi Check page. Change the server
IP as 172.60.5.142. Click Networks to get into Wifi Networks page,
choose the best signal network, click Connect. Once it shows Connected,
click Quit back to Wifi Check page. Click Connect To Server, a dialogue
box will pop up indicating Connected. Some information will show
under Receive.
2.13.
GPS
Go into Front page. Click Wireless, power on GPS module. Click the little
earth icon and it will search the location automatically.
11
Cogent Systems
2.14.
GPRS
Insert SIM card before check the GPRS. Go into Power Check page or
Wireless page to power on the GPRS module. Make sure other wireless
modules are power off. Click GPRS in Manual Check and get into GPRS
Check. Change server IP as 116.6.20.59. then click Dial, waiting for the
top right dialogue turn to Connected. Click Connect Server, a dialogue
box will pop up to show Connected. There are some information shows
under the Receive.
Will show date here if GPRS
connect successfully
2.15.
Bluetooth
Go into Power Check page or Wireless page to power on the Bluetooth
module. Make sure other wireless modules are power off. Click Bluetooth
in Manual Check and get into it. Click Scan Device. It will scan devices
automatically. Click Quit back to Manual Check.
12
Cogent Systems
2.16.
Barcode
Click Barcode in Manual Check and get into it.
Barcode camera light (red) will turn on while scanning barcode. The
distance between barcode tester and Mi3c should be in 8‐16cm.
13
Cogent Systems
8‐16cm
After the beep, Mi3c finish scanning the barcode. Now the barcode
data is showed on the barcode page. Please notice the scanned
barcode under should be same as the number on barcode tester.
Click Continue to scan another barcode.
Note: make Mi3c and barcode tester steady, do not trembling. Ensure
indoor light is bright enough. Otherwise Mi3c may fail to scan the
barcode because of the light spot on the barcode tester. Make sure the
whole barcode is inside the scan frame. The distance between Mi3c and
14
Cogent Systems
barcode tester is in 8‐16cm (can be adjusted according the scan
situation).
3. Photo
Click Photo in Front page. Click Capture to capture the image. Click Photo List, it
will show all photos you captured. Click Exit back to Front page.
4. Settings
Click Settings in Front page.
15
Cogent Systems
4.1. Volume
Click Volume and get into it. Adjust the volume by adjusting volume bar.
4.2. Date
Click Date, adjust the date by clicking ‘- ‘ or ‘+’. Click Save to save your
change.
16
Cogent Systems
4.3. Screen Calibration
Click Screen Calibration and get into it. Click the central of the cross until it
finished the calibration.
4.4. Fingerprint Calibration
Click Fingerprint Calibration and get into it. Clean the fingerprint sensor, click
Start. It will calibrate the sensor automatically. After calibrating, it will return
to the Settings page automatically.
17
Cogent Systems
4.5. LCD
Click LCD and get into it. Adjust the LCD brightness by clicking ‘‐‘ or ‘+’ ,
click Save to save change.
5. Identify
Click Identify in Front page and get into it.
5.1. Enroll
Click Enroll and get into Base Information. After enter all the basic
information, click Save to save it. Click OK to go to the next step.
18
Cogent Systems
The next step is fingerprints captured. Enter ten fingerprints as instructed, it
will capture fingerprints automatically. After capturing ten fingerprints, click
Save to save the data then click OK, it will go into next step.
19
Cogent Systems
The next step is face image captured. 5 face image need to be captured:
Face_0, Face_L45, Face_R45, Face_L90, Face_R90. Click Capture to capture
the face image, click Save to save the data, click OK to return back to main
page.
5.2. Search
Click Search, a dialogue will pop up. Select ByFinger. Press finger on the
fingerprint sensor. If the fingerprint get the hit, it will show on the top, and
corresponding facial image will show below.
Fingerprint
Facial image
20
Cogent Systems
Select ByFacial.
Capturing
image
Detected
image
face
Captured
image
face
face
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
21
Cogent Systems
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Company                         : cogent SYSTEMS
Source Modified                 : D:20090730011105
Create Date                     : 2009:07:30 09:12:33+08:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2009:07:30 09:13:18+08:00
Metadata Date                   : 2009:07:30 09:13:18+08:00
Document ID                     : uuid:a5222b9a-8830-48cb-b2c1-82b4d92317ed
Instance ID                     : uuid:e96f699b-d570-420f-8c27-0d85dfcf5f99
Version ID                      : 2
Format                          : application/pdf
Title                           : Instruction for Mobile Ident IIIc (Mi3c)
Creator                         : erin
Subject                         : 
Headline                        : 
Page Count                      : 22
Page Layout                     : OneColumn
Author                          : erin

EXIF Metadata provided by EXIF.tools