Compex Systems WLE600VX 802.11ac Dual Band Module User Manual ah

Download:
Mirror Download [FCC.gov]
Document ID	3416114
Application ID	GOEQON4PcWGjKFg7aM8IoA==
Document Description	WLE600VX_User Manual 2017-06-05
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.08kB (750989 bits)
Date Submitted	2017-06-07 00:00:00
Date Available	2017-06-07 00:00:00
Creation Date	2017-06-05 19:19:06
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2017-06-05 19:19:06
Document Title	ah
Document Creator	Microsoft® Office Word 2007
Document Author:	ADELINE

product datasheet
2x2 2.4/5GHz 11ac miniPCIe Radio
Model: WLE600VX, WLE600VX-I
Features
•
Qualcomm-Atheros QCA9892
•
2.4GHz max 24dBm & 5GHz max 23dBm output power
•
IEEE 802.11ac complaint & backward compatible with 802.11a/b/g/n
•
2X2 MIMO Technology & up to 867Mbps
•
MiniPCI Express 1.1 interface
•
Supports Spatial Multiplexing, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
•
Supports IEEE 802.11d, e, h, I, k, RO, v time stamp, and w standards
•
Supports Client Dynamic Frequency Selection (DFS)
•
Cards are individually calibrated for Quality Assurance
•
Supported by either CompexWRT with Atheros Reference Wireless Driver
Revision:1.04 IL
Date: 2015,03,30
Technical Specifications
Chipset
Host Interface
Operating Voltage
Power Consumption
Antenna Connector
Frequency Range
Modulation Techniques
RoHS Compliance
Temperature Range
Humidity
Dimensions (mm)
Band
802.11bg
2.4GHz 11n
HT20
2.4GHz 11n
HT40
802.11a
5GHz 11an/ac
HT20
5GHz 11n/ac
HT40
5GHz11ac
HT80
System Information
QCA9892
PCI-Express 1.1 Standard
3.3 VDC
3.5W
2 x U.F L
2.4G: 2.412 ~ 2.462 GHz 5G: 5.180 ~ 5.825 GHz
BPSK, QPSK, DBPSK,DQPSK,CCK,16-QAM, 64-QAM, 256-QAM
Yes
Operating: -20º
C to 70º
C;
Storage: -40º
C to 90º
Operating:5% to 95% (non-condensing)
Storage: Max.90% (non-condensing)
50.95 x 30 x 3.2 (H x W x D)
TX Specifications
Data
Rate
6-24Mbps
36Mbps
48Mbps
54Mbps
MCS 0
MCS 1
MCS 2
MCS 3
MCS 4
MCS 5
MCS 6
MCS 7
MCS 0
MCS 1
MCS 2
MCS 3
MCS 4
MCS 5
MCS 6
MCS 7
6-24Mbps
36Mbps
48Mbps
54Mbps
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
TX Power
(per chain)
22dBm
21dBm
20dBm
19dBm
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
TX Power
(2 chains)
N/A
N/A
N/A
N/A
24dBm
24dBm
24dBm
23dBm
23dBm
23dBm
21dBm
19dBm
19dBm
19dBm
19dBm
17dBm
17dBm
17dBm
16dBm
16dBm
21dBm
20dBm
19dBm
18dBm
23dBm
23dBm
23dBm
22dBm
22dBm
20dBm
19dBm
19dBm
18dBm
18dBm
23dBm
23dBm
23dBm
21dBm
21dBm
19dBm
18dBm
18dBm
17dBm
17dBm
20dBm
20dBm
20dBm
19dBm
19dBm
19dBm
18dBm
18dBm
17dBm
17dBm
Tolerance
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
±0.5dB
Data
Rate
6Mbps
36Mbps
48Mbps
54Mbps
MCS 0
MCS1
MCS2
MCS 3
MCS 4
MCS 5
MCS 6
MCS 7
MCS 0
MCS1
MCS2
MCS 3
MCS 4
MCS 5
MCS 6
MCS 7
6Mbps
36Mbps
48Mbps
54Mbps
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
RX Specifications
Sensitivity
Tolerance
-94dBm
-86dBm
-82dBm
-80dBm
-94dBm
-94dBm
-92dBm
-88dBm
-84dBm
-81dBm
-78dBm
-77dBm
-93dBm
-91dBm
-90dBm
-85dBm
-82dBm
-78dBm
-77dBm
-75dBm
-94dBm
-86dBm
-82dBm
-80dBm
-93dBm
-91dBm
-90dBm
-85dBm
-82dBm
-78dBm
-77dBm
-75dBm
-73dBm
-71dBm
-93dBm
-91dBm
-90dBm
-85dBm
-82dBm
-78dBm
-77dBm
-75dBm
-73dBm
-71dBm
-89dBm
-88dBm
-85dBm
-81dBm
-79dBm
-75dBm
-74dBm
-72dBm
-70dBm
-68dBm
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
±2dB
Dimension Drawing
Ordering Information
Item Code
Chipset
Form factor
Card Information
WLE600VX
Atheros 9892
Full size
2x2 802.11ac 2.4G/5G PCIe mini card
Compliance Information
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This device must accept any interference received, including interference that may cause
undesired operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated
in accordance with provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is
no longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
(1) The modules FCC ID is not visible when installed in the host, or
(2) If the host is marketed so that end users do not have straight forward commonly used
methods for access to remove the module so that the FCC ID of the module is visible;
then an additional permanent
Caution1:
When the module uses the frequency band 5150 - 5250 MHz & 5725 - 5850 MHz, the
module should be applied to the P-T-P end-product, 5250 - 5350 MHz & 5470 - 5725 MHz
can’t use in these type products.
Caution2:
Both of the WLAN 2.4GHz Band and WLAN 5GHz Band can’t transmit simultaneously.
The antenna gain which being use as below:
Antenna Type
Frequency
Band
(MHz)
Model
Model
Max Peak
Antenna
Gain
(dBi)
5150 ~ 5875
MTI Wireless Edge Ltd.
MT-485001
18.0
4900 ~ 5875
PENSON Wireless,
Inc., Taiwan
OM24580703
7.0
2412 ~ 2462
PENSON Wireless,
Inc., Taiwan
OM24580703
5.0
OEM integration instructions：
This device is intended only for OEM integrators under the following conditions：
The antenna must be installed such that 20 cm is maintained between the antenna and users,
and the transmitter module may not be co-located with any other transmit or antenna. The
module shall be only used with the integral antenna(s) that has been originally tested and
certified with this module.
As long as 3 conditions above are met，further transmitter test will not be required.
However，the OEM integrator is still responsible for testing their end-product for any
additional compliance requirement with this module installed (for example，digital device
emission，PC peripheral requirements，etc.)
End product labeling：
This transmitter module is authorization only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in a visible area with the following：“Contains Transmitter Module
FCC ID: TK4WLE600VX or Contains FCC ID: TK4WLE600VX”.
Information that must be placed in the end user manual：
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module. The end user manual shall include all required regulatory
information/warning as show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : ah
Author                          : ADELINE
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:06:05 19:19:06+08:00
Modify Date                     : 2017:06:05 19:19:06+08:00
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools