Compoka Electronic Technology KBJ-151N BT SPORTS BEHIND NECK HEADPHONE User Manual KBJ 151N

Shenzhen Compoka Electronic Technology Co., Ltd BT SPORTS BEHIND NECK HEADPHONE KBJ 151N

User manual

User's ManualKBJ-151NStereo Headset立体声蓝牙耳机使用说明书Bluetooth 4.0USB charging portSwitch on: Press 3 seconds to switch on, the blue indicatorwill be in(voice prompts in English). Press 2.5 seconds, itenters into pairing mode, the red and blue indicators take turns to flash.(voice prompts in English); power will switch off automatically after 5 minutes no devices to connect .In music mode, press it 1 time to pause, and press it again to play. (when phone call comes, the music will be off. When phone call is off, the music will continue.Short press “volume increase”key for 1 time to increase volume with one point, long press to increase volume all the time. The voice prompts will appear when the volume up to the maximum.Short press “volume Decrease”key for 1 time to decrease volume with one point, long press to decrease volume all the time (the “Du,Du ” warning sound will appear when the volume up to the minimum). 10:30 90%KBJ-151N蓝牙现为可被发现状态设备已连接ON/OFF蓝牙通用0201 03 04    Thank you for selecting our latest Bluetooth headset, please read this User's Manual carefully before you operate this headset, and please save this Manual for further reference.Before operating, please read all the Safety notice to make sure the safe and appropriate use.Safety Notice:  Please observe the rules of the Country or Region which you   are in while driving.  Do not disassemble or modify the headset at any reason,   otherwise, It may damage or burn the headset.  If there is any quality problem, please send the headset to   authorized service center for repairing.  Please keep the equipment along with all the accessories out   of the reach of children and pets. It will cause suffocation and   serious injury.  Do not put the device under the environment which the   temperature is too low or too high ( Below 0℃ or over 45℃).  Extreme temperatures will cause the device deformation,  reduce the charging capacity and shorten the working life.  Please do not wet the device, for the liquid can cause serious   damage to the device. Please do not touch the device by wet   hands. It is out of the maintenance range for the damage   caused by water.  Please avoid closing to the eyes of children and pets when   using the flash indicator of the device.  Please do not operate the device in thunderstorm weather. It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music.  1. Guide■ Headset introduction※ Contents: Bluetooth Headset, USB Charging Cable,      User's ManualUSB Charging Cable:2.Instruction■ Key FunctionPowerswitchPrevious songNext SongVolume IncreaseVolume DecreasePlayPause■ How to connect with two Bluetooth mobile phones:3. Battery power of bluetooth headset displayed on Iphone※ After connected with Iphone, the battery power of the     headset will be displayed on the phone.Press “function key” to receive phone call, press it again to end the phone call.Press the key by twice continuously to re-dial the last phone number.Press the key for 2 seconds to reject the phone call.In the Music Mode, press it to play previous song.In the Music Mode, press it to play next song.90%HeadbandSilicone SheathSilicone ear budsEar arm (horn base)LED indicatorMicrophoneAutomatic reset volume switchAutomatically reset previous songNext song switchMusic play/pause810 1196101187932451Power switch/PairingReceive/Hang up phone callRe-dial the last phone NoReceiveHang up phone callSwitch off: Press 3 seconds to switch off, the red indicator flashes one time mean the device is switched off (voice prompts in English)1) Turn on the bluetooth function of mobile phone 1.2) Press "      " of bluetooth headset for 4~5 seconds, bluetooth     switch on and enters into pairing mode, the red and blue     indicators take turns to flash, make connection with phone 1     (English voice prompts)  3) Press "      " for 3 seconds to switch off the headset(voice     prompts), and phone 1 is disconnected, meanwhile turn off     the bluetooth function of phone 1.4) Return on the bluetooth headset, and make it enter into     pairing mode, blue and red indicator take turns to flash     (voice prompts)5) Turn on the bluetooth function of phone 2, and search the     device KBJ-151N from the device list, and make connection6) Turn off the headset bluetooth, and turn on again. And turn    on the bluetooth function of both phones.The headset will     make connection with two mobile phones automatically
www.compoka.com立体声蓝牙耳机Bluetooth 4.0 Stereo Headset06 07 08057.Project Specification and Instruction- Bluetooth Version : V4.0- Supported devices: Bluetooth mobile phones,    Bluetooth speakers Bluetooth PC and other Bluetooth    devices- Maximum work range: 33 Feet (10 Meters)- Standby time:  80 Hours- Music play/Talk time: 3 Hours- Charging time: 2 Hours- Charging Voltage: DC 5V- Work Voltage: 3.7V- Sensitivity: 105±3dB - Frequency Response: 20Hz~20KHz※  The actual time may vary from mobile phone types and      functions.Use both hands to pick to wear the headset:4.Bluetooth Indicator StatusRed indicator is on all the time when charging; Blue indicator is on instead when charged fullChargingWork Status  Indicator Light Status RemarkSwitch on Blue indicator flash 2 timesSwitch off Red indicator flash 1 timeConnectionPhone callPlay MusicBattery lowwarning5.Headset Charging6.Wearing StylePairing Mode Red and blue indicators take turns to flash Voice PromptsVoice PromptsVoice PromptsVoice PromptsVoice Prompts(1) Put the headset on your head, rotate to the back of your       head (see Pic 1)(2) Put the earhook on both of your ears (see Pic 2)(3) Put the speaker into ears and adjust to the comfortable       position (see Pic 3). After wearing well, the headset       backside should be "suspended" above the neck.       According to personal comfort demand, can adjust the       headset up or down appropriatelyPic 1 Pic 2 Pic 3※ If the speaker shut down without battery during the phone,     when call, it will switch to mobile phone automatically.※ Press Function Key “        ” 2 seconds to reject the call.This headset is equipped with built-in non-detachable and rechargeable battery.Please make sure that the battery is charged full for the first time use.■ Connect the charger to the charging port.■ Insert the charger into the standard power outlet.    During the charging, indicator will turn to Red. If without    charging, please plug out the travel charger first, then    connect it again. ■ After full charging, red indicator will be off. Please plug out   the travel charger from the power outlet and headset.■ It will reduce the battery performance after long time /    repeatable charge and dis-charge.■ And it is normal phenomenon for all the rechargeable battery.    Please do not dial or receive phone call during charging, and    please plug out the charger from the headset, then receive    the phone call. When the battery is low, the headset will    appear the prompt and the red indicator will flash.Blue indicator will flashBlue indicator will flashBlue indicator will flashRed indicator will flash every 60 second      (the voice prompts “Bluetooth is connected”  will appear       2 times in English) . ※  When the headset is connected with two mobile phones,       some functions of the mobile phones cannot work       normally.
   This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions: (1) this device may not cause harmful interference, and (2) this device must accept any  interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could  void the user's authority to operate the equipment.  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital  device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  protection against harmful interference in a residential installation. This equipment generates, uses  instructions, may cause harmful interference to radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equipment does cause  harmful interference to radio or television reception, which can be determined by turning the  equipment off and on, the user is encouraged to try to correct the interference by one or more of  the following measures:  -- Reorient or relocate the receiving antenna.  -- Increase the separation between the equipment and receiver.  -- Connect the equipment into an outlet on a circuit different from that to which the receiver is  connected.  -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu