Compoka Electronic Technology KBJ-151N BT SPORTS BEHIND NECK HEADPHONE User Manual KBJ 151N

Shenzhen Compoka Electronic Technology Co., Ltd BT SPORTS BEHIND NECK HEADPHONE KBJ 151N

User manual

Download: Compoka Electronic Technology KBJ-151N BT SPORTS BEHIND NECK HEADPHONE User Manual KBJ 151N
Mirror Download [FCC.gov]Compoka Electronic Technology KBJ-151N BT SPORTS BEHIND NECK HEADPHONE User Manual KBJ 151N
Document ID2458711
Application IDNkqjUb+8hbs04OCwt3PMUQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize72.08kB (901058 bits)
Date Submitted2014-11-29 00:00:00
Date Available2014-11-29 00:00:00
Creation Date2014-10-29 15:09:04
Producing SoftwareAdobe PDF library 9.90
Document Lastmod2014-11-14 15:43:04
Document TitleKBJ-151N_说明书
Document CreatorAdobe Illustrator CS5

Bluetooth 4.0
Stereo Headset
KBJ-151N
User's Manual
立体声蓝牙耳机
使用说明书
Thank you for selecting our latest Bluetooth headset, please
read this User's Manual carefully before you operate this
headset, and please save this Manual for further reference.
Before operating, please read all the Safety notice to make sure
the safe and appropriate use.
It will damage your hearing if you listen with high
volume for a long time. It is recommended that
only use the lowest volume which is necessary
for speaking and listening to music.
1. Guide
■ Headset introduction
Safety Notice:
Please observe the rules of the Country or Region which you
are in while driving.
Do not disassemble or modify the headset at any reason,
otherwise, It may damage or burn the headset.
If there is any quality problem, please send the headset to
authorized service center for repairing.
Please keep the equipment along with all the accessories out
of the reach of children and pets. It will cause suffocation and
serious injury.
Do not put the device under the environment which the
temperature is too low or too high ( Below 0℃ or over 45℃).
Extreme temperatures will cause the device deformation,
reduce the charging capacity and shorten the working life.
Please do not wet the device, for the liquid can cause serious
damage to the device. Please do not touch the device by wet
hands. It is out of the maintenance range for the damage
caused by water.
Please avoid closing to the eyes of children and pets when
using the flash indicator of the device.
Please do not operate the device in thunderstorm weather.
01
※ After connected with Iphone, the battery power of the
headset will be displayed on the phone.
※ Contents: Bluetooth Headset, USB Charging Cable,
User's Manual
Power
switch
现为可被发现状态
Switch on: Press 3 seconds to switch on, the blue indicator
will be in(voice prompts in English). Press 2.5 seconds, it
enters into pairing mode, the red and blue indicators take
turns to flash.(voice prompts in English); power will switch
off automatically after 5 minutes no devices to connect .
Switch off: Press 3 seconds to switch off, the red indicator
flashes one time mean the device is switched off (voice
prompts in English)
Press “function key” to receive phone call, press it
Headband
Silicone Sheath
Silicone ear buds
USB charging port
Ear arm (horn base)
Music play/pause
Automatically reset previous song
Next song switch
Power switch/Pairing
8 Receive/Hang up phone call
Re-dial the last phone No
9 Automatic reset volume switch
10 Microphone
02
11 LED indicator
90%
ON/OFF
已连接
KBJ-151N
Receive again to end the phone call.
Hang up Press the key by twice continuously to re-dial the last
phone call phone number.
Play
Pause
90%
蓝牙
蓝牙
设备
■ Key Function
11
10
10:30
通用
2.Instruction
3. Battery power of bluetooth headset displayed on Iphone
USB Charging Cable:
Press the key for 2 seconds to reject the phone call.
In music mode, press it 1 time to pause, and press it
again to play. (when phone call comes, the music will
be off. When phone call is off, the music will continue.
Next Song In the Music Mode, press it to play next song.
Previous
In the Music Mode, press it to play previous song.
song
Short press “volume increase”key for 1 time to increase
Volume volume with one point, long press to increase volume all
Increase the time. The voice prompts will appear when the volume
up to the maximum.
Volume Short press “volume Decrease”key for 1 time to decrease
Decrease volume with one point, long press to decrease volume all
the time (the “Du,Du ” warning sound will appear when the
volume up to the minimum).
03
■
How to connect with two Bluetooth mobile phones:
1) Turn on the bluetooth function of mobile phone 1.
2) Press "
" of bluetooth headset for 4~5 seconds, bluetooth
switch on and enters into pairing mode, the red and blue
indicators take turns to flash, make connection with phone 1
(English voice prompts)
3) Press "
" for 3 seconds to switch off the headset(voice
prompts), and phone 1 is disconnected, meanwhile turn off
the bluetooth function of phone 1.
4) Return on the bluetooth headset, and make it enter into
pairing mode, blue and red indicator take turns to flash
(voice prompts)
5) Turn on the bluetooth function of phone 2, and search the
device KBJ-151N from the device list, and make connection
6) Turn off the headset bluetooth, and turn on again. And turn
on the bluetooth function of both phones.The headset will
make connection with two mobile phones automatically
04
(the voice prompts “Bluetooth is connected” will appear
2 times in English) .
※ When the headset is connected with two mobile phones,
some functions of the mobile phones cannot work
normally.
4.Bluetooth Indicator Status
Work Status
Switch on
Indicator Light Status
Blue indicator flash 2 times
Remark
Voice Prompts
Red indicator flash 1 time
Voice Prompts
Pairing Mode
Red and blue indicators take
turns to flash
Voice Prompts
Connection
Blue indicator will flash
Voice Prompts
Phone call
Blue indicator will flash
Play Music
Blue indicator will flash
Battery low
warning
Red indicator will flash every
60 second
Charging
Red indicator is on all the time
when charging; Blue indicator is
on instead when charged full
Switch off
Voice Prompts
7.Project Specification and Instruction
5.Headset Charging
This headset is equipped with built-in non-detachable and
rechargeable battery.
Please make sure that the battery is charged full for the first
time use.
■ Connect the charger to the charging port.
■ Insert the charger into the standard power outlet.
During the charging, indicator will turn to Red. If without
charging, please plug out the travel charger first, then
connect it again.
■ After full charging, red indicator will be off. Please plug out
the travel charger from the power outlet and headset.
■ It will reduce the battery performance after long time /
repeatable charge and dis-charge.
■ And it is normal phenomenon for all the rechargeable battery.
Please do not dial or receive phone call during charging, and
please plug out the charger from the headset, then receive
the phone call. When the battery is low, the headset will
appear the prompt and the red indicator will flash.
※ If the speaker shut down without battery during the phone,
when call, it will switch to mobile phone automatically.
※ Press Function Key “
” 2 seconds to reject the call.
- Bluetooth Version : V4.0
- Supported devices: Bluetooth mobile phones,
Bluetooth speakers Bluetooth PC and other Bluetooth
devices
- Maximum work range: 33 Feet (10 Meters)
6.Wearing Style
Use both hands to pick to wear the headset:
(1) Put the headset on your head, rotate to the back of your
head (see Pic 1)
(2) Put the earhook on both of your ears (see Pic 2)
(3) Put the speaker into ears and adjust to the comfortable
position (see Pic 3). After wearing well, the headset
backside should be "suspended" above the neck.
According to personal comfort demand, can adjust the
headset up or down appropriately
Bluetooth 4.0
Stereo Headset
立体声蓝牙耳机
※ The actual time may vary from mobile phone types and
functions.
www.compoka.com
Pic 1
05
- Standby time: 80 Hours
- Music play/Talk time: 3 Hours
- Charging time: 2 Hours
- Charging Voltage: DC 5V
- Work Voltage: 3.7V
- Sensitivity: 105±3dB
- Frequency Response: 20Hz~20KHz
06
Pic 2
07
Pic 3
08
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : KBJ-151N_说明书
Metadata Date                   : 2014:11:14 15:43:04+08:00
Modify Date                     : 2014:11:14 15:43:04+08:00
Create Date                     : 2014:10:29 15:09:04+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 148
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16715 bytes, use -b option to extract)
Instance ID                     : uuid:6c781182-f88a-49d4-a916-3e8b6fb6e101
Document ID                     : xmp.did:8975C0C2395FE411901486D09351D06B
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8875C0C2395FE411901486D09351D06B
Derived From Document ID        : xmp.did:8875C0C2395FE411901486D09351D06B
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:75E108905522E311B568A800AF5DC982, xmp.iid:EBE80A960B04E41195E2BB369196CBC8, xmp.iid:A5F318F5E319E411896BC9263E1974C9, xmp.iid:A6F318F5E319E411896BC9263E1974C9, xmp.iid:EF53F051D92CE411AE13F6C315508134, xmp.iid:F053F051D92CE411AE13F6C315508134, xmp.iid:F153F051D92CE411AE13F6C315508134, xmp.iid:F253F051D92CE411AE13F6C315508134, xmp.iid:6294806A015FE411901486D09351D06B, xmp.iid:8875C0C2395FE411901486D09351D06B, xmp.iid:8975C0C2395FE411901486D09351D06B
History When                    : 2013:09:21 08:34:23+08:00, 2014:07:05 14:14:13+08:00, 2014:08:02 09:29:07+08:00, 2014:08:02 09:32:29+08:00, 2014:08:26 16:11:26+08:00, 2014:08:26 16:30:47+08:00, 2014:08:26 16:30:56+08:00, 2014:08:26 17:15:21+08:00, 2014:10:29 15:03:09+08:00, 2014:10:29 15:04:01+08:00, 2014:10:29 15:09:02+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /, /, /, /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 336.203079
Max Page Size H                 : 91.999897
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, MyriadPro-Semibold, MyriadPro-Regular, HYe2gj, AdobeSongStd-Light
Font Family                     : Arial, Arial, Myriad Pro, Myriad Pro, 汉仪细中圆简, Adobe 宋体 Std
Font Face                       : Bold, Regular, Semibold, Regular, regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 3.00, Version 3.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF, MyriadPro-Semibold.otf, MyriadPro-Regular.otf, 汉仪细中圆简.ttf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 15.0
For                             : Administrator,
Bounding Box                    : 329 -1201 1264 -662
Container Version               : 11
Creator Version                 : 15
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AA7XKBJ-151N

Navigation menu