Compoka Electronic Technology KBJ-225N FOLDABLE BLUETOOTH HEADPHONE User Manual KBJ 225N
Shenzhen Compoka Electronic Technology Co., Ltd FOLDABLE BLUETOOTH HEADPHONE KBJ 225N
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2504777 |
| Application ID | wdoNNFAJ7FhEKiAq1m97Yw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 62.29kB (778649 bits) |
| Date Submitted | 2015-01-17 00:00:00 |
| Date Available | 2015-01-17 00:00:00 |
| Creation Date | 2014-11-19 14:00:28 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2015-01-13 16:48:20 |
| Document Title | KBJ-225N user manual |
| Document Creator | Adobe Illustrator CS5 |
Bluetooth 4.0 Stereo Headphone KBJ-225N User's Manual 立体声蓝牙耳机 使用说明书 Thank you for selecting our latest Bluetooth headphone, please read this User's Manual carefully before you operate this headphone, and please save this Manual for further reference. Before operating, please read all the Safety notice to make sure the safe and appropriate use. It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music. Please observe the rules of the Country or Region which you are in while driving. Do not disassemble or modify the headphone at any reason, otherwise, It may damage or burn the headphone. If there is any quality problem, please send the headphone to authorized service center for repairing. Please keep the equipment along with all the accessories out of the reach of children and pets. It will cause suffocation and serious injury. Do not put the device under the environment which the temperature is too low or too high ( Below 0℃ or over 45℃). Extreme temperatures will cause the device deformation, reduce the charging capacity and shorten the working life. Please do not wet the device, for the liquid can cause serious damage to the device. Please do not touch the device by wet hands. It is out of the maintenance range for the damage caused by water. Please avoid closing to the eyes of children and pets when using the flash indicator of the device. Please do not operate the device in thunderstorm weather. 01 VOICE PROMPT 3.5mm Audio Cable: Bluetooth is turned on Bluetooth enter pairing mode 1. Guide ■ Heaphone introduction Safety Notice: ■ Voice Prompt Function USB Charging Cable: 2.Instruction ■ Key Function head pad Foldable Power switch Pairing Play/Pause Receive Hang up phone call Re-dial the last phone No Previous song Volume Increase LED indicator Next Song Volume Decrease D3.5mm Plug port Microphone Ear cushion USB Charging Port ※ Contents: Bluetooth Headphone, USB Charging Cable, 3.5mm Audio Cable, User’s Manual 02 Power switch Pairing Play/Pause Receive Hang up phone call Re-dial the last phone No Switch on : Press 2 seconds to switch on , the Blue indicator will be in (It will appear voice prompts in English). Press 2 seconds again to enter into pairing mode, meanwhile the red and blue indicators take turns to flash. It will turn off automatically when no device to connect in 5 mins ) . Switch off : Press 4 seconds to switch off , the Red indicator flashes one time means the device is switched off. Press “Function Key” to receive phone call, press it again to end the phone call. Press the key for 2 seconds to reject the phone call. Press the key by twice continuously to re-dial the last phone number. In Music Mode, press it for 1 time to pause, and press it again to play. (when phone call comes, the music will be off. When phone call is off, the music will continue) In Music Mode, press it to play previous song. Previous song Long press to increase volume all the time. The voice prompts will appear when the volume Volume Increase up to Maximum. Next Song In Music Mode, press it to play next song. Volume Decrease Long press to decrease volume all the time. 03 When entering into paring mode Bluetooth is connected When you connect the first mobile phone Bluetooth is connected When you connect the second mobile phone Volume max When the volume up to the maximum Bluetooth is turned off When you turn the headphone off Battery low ■ STATUS When you turn the headphone on Battery low warning How to connect with two Bluetooth mobile phones: (1) Turn on the bluetooth function of mobile phone 1. (2) Press the” ” for 4 seconds of the bluetooth headset, switch on and enter into pairing mode, blue and red indicators take turns to flash, make connection with phone 1 (3) press the ” ” again for 2.5 seconds, the red and blue indicators take turns to flash and searching connections automatically; meanwhile, phone 1 is disconnected. (4) Turn on the bluetooth function of the mobile phone 2 and search KBJ-225N from the list, make connection.(Input the password 0000 if needed and the connection will be made) (5) Turn off the bluetooth headset and return on, the headset will connect with both mobile phones automatically. The voice “Bluetooth is connected, bluetooth is connected” will appear in English. 04 ※ When the headphone is connected with two mobile phones, some functions of the mobile phones cannot work normally. Switch off ※ After connected with Iphone, the battery power of the headphone will be displayed on the phone. 10:30 90% 蓝牙 蓝牙 ON/OFF 设备 Work Status Switch on 3. Battery power of bluetooth headphone displayed on Iphone 通用 4.Bluetooth Indicator Status 90% Remark Voice Prompts Red indicator flash 1 time Voice Prompts Pairing Red and blue indicators take turns to flash Voice Prompts Connection Blue indicator will flash 1 time every 6 seconds Voice Prompts Phone call Blue indicator will flash 1 time every 6 seconds Play Music Blue indicator will flash 1 time every 6 seconds Battery low warning Red indicator will flash 1 time every 60 seconds Charging Red indicator is on all the time when charging; Blue indicator is on instead when charged full 已连接 KBJ-101N Indicator Light Status Blue indicator flash 2 times ■ Insert the charger into the standard power outlet. During the charging, indicator will turn to Red. If without charging, please plug out the travel charger first, then connect it again. ■ After full charging, red indicator will be off. Please plug out the travel charger from the power outlet and headset. ■ It will reduce the battery performance after long time / repeatable charge and dis-charge. ■ And it is normal phenomenon for all the rechargeable battery. Please do not dial or receive phone call during charging, and please plug out the charger from the headset, then receive the phone call. When the battery is low, the headset will appear the prompt and the red indicator will flash. 现为可被发现状态 Voice Prompts 5.Headphone Charging This headphone is equipped with built-in non-detachable and rechargeable battery. Please make sure that the battery is charged full for the first time use. ■ Connect the charger to the charging port. 05 06 ※ If the headphone shut down without battery during the phone calls, it will switch to mobile phone automatically. 6．Audio cable connection Line Insert 3.5mm audio cable into speaker 3.5mm plug port, the other part into audio output device(MP3/PC), then you can enjoy music. When the bluetooth speaker is on, the bluetooth function will be preffered although insert audio cable. 7.Project Specification and Instruction - Bluetooth Version : V4.0 - Supported devices: Bluetooth mobile phones, Bluetooth speakers Bluetooth PC and other Bluetooth devices - Maximum work range: 33 Feet (10 Meters) - Standby time: 100 Hours - Talk time: 12 Hours - Music play: 10 Hours - Charging time: 3 Hours - Charging Voltage: DC 5V - Work Voltage: 3.7V - Sensitivity: 100±3dB - Frequency Response: 20Hz~20KHz Bluetooth 4.0 Stereo Headphone 立体声蓝牙耳机 ※ The actual time may vary from mobile phone types and functions. www.compoka.com 07 08 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-701 Format : application/pdf Title : KBJ-225N user manual Metadata Date : 2015:01:13 16:48:20+08:00 Modify Date : 2015:01:13 16:48:20+08:00 Create Date : 2014:11:19 14:00:28+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 188 Thumbnail Format : JPEG Thumbnail Image : (Binary data 11881 bytes, use -b option to extract) Instance ID : uuid:fc5fcf99-9df1-43cf-bf21-8cfd7e3bb945 Document ID : xmp.did:A360191BB16FE411A586DCDDDC06D603 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:A260191BB16FE411A586DCDDDC06D603 Derived From Document ID : xmp.did:A260191BB16FE411A586DCDDDC06D603 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:75E108905522E311B568A800AF5DC982, xmp.iid:40121D9EDFA0E311A478EFF7BEFA68E8, xmp.iid:43121D9EDFA0E311A478EFF7BEFA68E8, xmp.iid:5F6DA94402A5E3119EFFEA1674FFA8A8, xmp.iid:616DA94402A5E3119EFFEA1674FFA8A8, xmp.iid:43CC04EEC016E411918D9621C15AEC15, xmp.iid:46CC04EEC016E411918D9621C15AEC15, xmp.iid:47CC04EEC016E411918D9621C15AEC15, xmp.iid:48CC04EEC016E411918D9621C15AEC15, xmp.iid:37FE6E653A69E411907CF311AACF890B, xmp.iid:209AC3928869E411AE19861B7A0E2380, xmp.iid:A260191BB16FE411A586DCDDDC06D603, xmp.iid:A360191BB16FE411A586DCDDDC06D603 History When : 2013:09:21 08:34:23+08:00, 2014:03:01 16:22:06+08:00, 2014:03:01 16:57:31+08:00, 2014:03:06 15:38:17+08:00, 2014:03:06 15:39:22+08:00, 2014:07:29 09:37:41+08:00, 2014:07:29 14:33+08:00, 2014:07:29 14:33:10+08:00, 2014:07:29 14:35:27+08:00, 2014:11:11 15:58:53+08:00, 2014:11:11 17:54:20+08:00, 2014:11:19 13:59:30+08:00, 2014:11:19 14:00:26+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, / Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 330.371910 Max Page Size H : 91.999897 Max Page Size Unit : Millimeters Font Name : Arial-BoldMT, ArialMT, MyriadPro-Semibold, MyriadPro-Regular, HYe2gj, AdobeSongStd-Light Font Family : Arial, Arial, Myriad Pro, Myriad Pro, 汉仪细中圆简, Adobe 宋体 Std Font Face : Bold, Regular, Semibold, Regular, regular, L Font Type : Open Type, Open Type, Open Type, Open Type, TrueType, Open Type Font Version : Version 3.00, Version 3.00, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False, False Font File Name : ARIALBD.TTF, ARIAL.TTF, MyriadPro-Semibold.otf, MyriadPro-Regular.otf, 汉仪细中圆简.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 3 Creator : Adobe Illustrator(R) 15.0 For : Administrator, Bounding Box : 329 -1201 1529 -327 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools